Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 149.3 >
edited by Xiaoling
on 2022/08/17 09:29
To version < 87.12 >
edited by Xiaoling
on 2022/07/13 10:04
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -1,64 +1,32 @@
1 1  
2 2  
3 -**Table of Contents:**
4 -
5 5  {{toc/}}
6 6  
7 7  
8 8  
7 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
10 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
13 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
15 15  
16 -(((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
18 -)))
15 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
19 19  
20 -(((
21 -
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 -)))
27 -
28 -(((
29 -(((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 -)))
32 -)))
33 -
34 -(((
35 -(((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 -)))
38 -)))
39 39  
40 -(((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 -)))
44 -)))
45 45  
46 -(((
47 -(((
48 48  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 -)))
50 -)))
51 51  
52 52  
53 -
54 54  == 1.2  Features ==
55 55  
56 -
57 -* Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
26 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 -* SMA connector
29 +* SMD Antenna pad and i-pex antenna connector
62 62  * Available in different frequency LoRaWAN frequency bands.
63 63  * World-wide unique OTAA keys.
64 64  * AT Command via UART-TTL interface
... ... @@ -66,11 +66,75 @@
66 66  * Ultra-long RF range
67 67  
68 68  
37 +== 1.3  Specification ==
69 69  
39 +* CPU: 32-bit 48 MHz
40 +* Flash: 256KB
41 +* RAM: 64KB
42 +* Input Power Range: 1.8v ~~ 3.7v
43 +* Power Consumption: < 4uA.
44 +* Frequency Range: 150 MHz ~~ 960 MHz
45 +* Maximum Power +22 dBm constant RF output
46 +* High sensitivity: -148 dBm
47 +* Temperature:
48 +** Storage: -55 ~~ +125℃
49 +** Operating: -40 ~~ +85℃
50 +* Humidity:
51 +** Storage: 5 ~~ 95% (Non-Condensing)
52 +** Operating: 10 ~~ 95% (Non-Condensing)
53 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
54 +* LoRa Rx current: <9 mA
55 +* I/O Voltage: 3.3v
70 70  
71 -== 1.3  Specification ==
72 72  
58 +== 1.4  AT Command ==
73 73  
60 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
61 +
62 +
63 +== 1.5  Dimension ==
64 +
65 +[[image:image-20220517072526-1.png]]
66 +
67 +
68 +
69 +== 1.6  Pin Mapping ==
70 +
71 +
72 +[[image:image-20220523101537-1.png]]
73 +
74 +
75 +
76 +== 1.7  Land Pattern ==
77 +
78 +[[image:image-20220517072821-2.png]]
79 +
80 +
81 +
82 += 2.  LA66 LoRaWAN Shield =
83 +
84 +
85 +== 2.1  Overview ==
86 +
87 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
88 +
89 +
90 +== 2.2  Features ==
91 +
92 +* Arduino Shield base on LA66 LoRaWAN module
93 +* Support LoRaWAN v1.0.4 protocol
94 +* Support peer-to-peer protocol
95 +* TCXO crystal to ensure RF performance on low temperature
96 +* SMA connector
97 +* Available in different frequency LoRaWAN frequency bands.
98 +* World-wide unique OTAA keys.
99 +* AT Command via UART-TTL interface
100 +* Firmware upgradable via UART interface
101 +* Ultra-long RF range
102 +
103 +
104 +== 2.3  Specification ==
105 +
74 74  * CPU: 32-bit 48 MHz
75 75  * Flash: 256KB
76 76  * RAM: 64KB
... ... @@ -90,242 +90,311 @@
90 90  * I/O Voltage: 3.3v
91 91  
92 92  
125 +== 2.4  Pin Mapping & LED ==
93 93  
94 94  
95 -== 1.4  Pin Mapping & LED ==
96 96  
129 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
97 97  
98 -[[image:image-20220817085048-1.png]]
99 99  
100 100  
133 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
101 101  
102 -~1. The LED lights up red when there is an upstream data packet
103 -2. When the network is successfully connected, the green light will be on for 5 seconds
104 -3. Purple light on when receiving downlink data packets
105 105  
106 106  
137 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
107 107  
108 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
109 109  
110 110  
111 -**Show connection diagram：**
141 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
112 112  
113 113  
114 -[[image:image-20220723170210-2.png||height="908" width="681"]]
144 +=== 2.8.1  Items needed for update ===
115 115  
146 +1. LA66 LoRaWAN Shield
147 +1. Arduino
148 +1. USB TO TTL Adapter
116 116  
150 +[[image:image-20220602100052-2.png||height="385" width="600"]]
117 117  
118 -(% style="color:blue" %)**1.  open Arduino IDE**
119 119  
153 +=== 2.8.2  Connection ===
120 120  
121 -[[image:image-20220723170545-4.png]]
122 122  
156 +[[image:image-20220602101311-3.png||height="276" width="600"]]
123 123  
124 124  
125 -(% style="color:blue" %)**2.  Open project**
159 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
126 126  
161 +(% style="background-color:yellow" %)**GND  <-> GND
162 +TXD  <->  TXD
163 +RXD  <->  RXD**
127 127  
128 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
129 129  
130 -[[image:image-20220726135239-1.png]]
166 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
131 131  
168 +Connect USB TTL Adapter to PC after connecting the wires
132 132  
133 133  
134 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
171 +[[image:image-20220602102240-4.png||height="304" width="600"]]
135 135  
136 -[[image:image-20220726135356-2.png]]
137 137  
174 +=== 2.8.3  Upgrade steps ===
138 138  
139 139  
140 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
177 +==== 1.  Switch SW1 to put in ISP position ====
141 141  
142 142  
143 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
180 +[[image:image-20220602102824-5.png||height="306" width="600"]]
144 144  
145 145  
146 146  
147 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
184 +==== 2.  Press the RST switch once ====
148 148  
149 149  
150 -(% style="color:blue" %)**1.  Open project**
187 +[[image:image-20220602104701-12.png||height="285" width="600"]]
151 151  
152 152  
153 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
154 154  
191 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
155 155  
156 -[[image:image-20220723172502-8.png]]
157 157  
194 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
158 158  
159 159  
160 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
197 +[[image:image-20220602103227-6.png]]
161 161  
162 162  
163 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
200 +[[image:image-20220602103357-7.png]]
164 164  
165 165  
166 166  
167 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
204 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
205 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
168 168  
169 169  
170 -(% style="color:blue" %)**1.  Open project**
208 +[[image:image-20220602103844-8.png]]
171 171  
172 172  
173 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
174 174  
212 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
213 +(% style="color:blue" %)**3. Select the bin file to burn**
175 175  
176 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
177 177  
216 +[[image:image-20220602104144-9.png]]
178 178  
179 179  
180 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
219 +[[image:image-20220602104251-10.png]]
181 181  
182 182  
183 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
222 +[[image:image-20220602104402-11.png]]
184 184  
185 185  
186 186  
187 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
226 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
227 +(% style="color:blue" %)**4. Click to start the download**
188 188  
189 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
229 +[[image:image-20220602104923-13.png]]
190 190  
191 -[[image:image-20220723175700-12.png||height="602" width="995"]]
192 192  
193 193  
233 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
234 +(% style="color:blue" %)**5. Check update process**
194 194  
195 -== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
196 196  
237 +[[image:image-20220602104948-14.png]]
197 197  
198 -=== 1.8.1  Items needed for update ===
199 199  
200 200  
201 -1. LA66 LoRaWAN Shield
202 -1. Arduino
203 -1. USB TO TTL Adapter
241 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
242 +(% style="color:blue" %)**The following picture shows that the burning is successful**
204 204  
205 -[[image:image-20220602100052-2.png||height="385" width="600"]]
244 +[[image:image-20220602105251-15.png]]
206 206  
207 207  
208 208  
209 -=== 1.8.2  Connection ===
248 += 3.  LA66 USB LoRaWAN Adapter =
210 210  
211 211  
212 -[[image:image-20220602101311-3.png||height="276" width="600"]]
251 +== 3.1  Overview ==
213 213  
253 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
214 214  
215 -(((
216 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
217 -)))
218 218  
219 -(((
220 -(% style="background-color:yellow" %)**GND  <-> GND
221 -TXD  <->  TXD
222 -RXD  <->  RXD**
223 -)))
256 +== 3.2  Features ==
224 224  
258 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
259 +* Ultra-long RF range
260 +* Support LoRaWAN v1.0.4 protocol
261 +* Support peer-to-peer protocol
262 +* TCXO crystal to ensure RF performance on low temperature
263 +* Spring RF antenna
264 +* Available in different frequency LoRaWAN frequency bands.
265 +* World-wide unique OTAA keys.
266 +* AT Command via UART-TTL interface
267 +* Firmware upgradable via UART interface
225 225  
226 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
227 227  
228 -Connect USB TTL Adapter to PC after connecting the wires
270 +== 3.3  Specification ==
229 229  
272 +* CPU: 32-bit 48 MHz
273 +* Flash: 256KB
274 +* RAM: 64KB
275 +* Input Power Range: 5v
276 +* Frequency Range: 150 MHz ~~ 960 MHz
277 +* Maximum Power +22 dBm constant RF output
278 +* High sensitivity: -148 dBm
279 +* Temperature:
280 +** Storage: -55 ~~ +125℃
281 +** Operating: -40 ~~ +85℃
282 +* Humidity:
283 +** Storage: 5 ~~ 95% (Non-Condensing)
284 +** Operating: 10 ~~ 95% (Non-Condensing)
285 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
286 +* LoRa Rx current: <9 mA
230 230  
231 -[[image:image-20220602102240-4.png||height="304" width="600"]]
232 232  
289 +== 3.4  Pin Mapping & LED ==
233 233  
234 234  
235 -=== 1.8.3  Upgrade steps ===
236 236  
293 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
237 237  
238 238  
239 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
296 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
240 240  
241 241  
242 -[[image:image-20220602102824-5.png||height="306" width="600"]]
299 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
243 243  
244 244  
302 +[[image:image-20220602171217-1.png||height="538" width="800"]]
245 245  
246 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
247 247  
305 +Open the serial port tool
248 248  
249 -[[image:image-20220817085447-1.png]]
307 +[[image:image-20220602161617-8.png]]
250 250  
309 +[[image:image-20220602161718-9.png||height="457" width="800"]]
251 251  
252 252  
253 253  
254 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
313 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
255 255  
315 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
256 256  
257 -(((
258 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
259 -)))
260 260  
318 +[[image:image-20220602161935-10.png||height="498" width="800"]]
261 261  
262 -[[image:image-20220602103227-6.png]]
263 263  
264 264  
265 -[[image:image-20220602103357-7.png]]
322 +(% style="color:blue" %)**3. See Uplink Command**
266 266  
324 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
267 267  
326 +example: AT+SENDB=01,02,8,05820802581ea0a5
268 268  
269 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
270 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
328 +[[image:image-20220602162157-11.png||height="497" width="800"]]
271 271  
272 272  
273 -[[image:image-20220602103844-8.png]]
274 274  
332 +(% style="color:blue" %)**4. Check to see if TTN received the message**
275 275  
334 +[[image:image-20220602162331-12.png||height="420" width="800"]]
276 276  
277 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
278 -(% style="color:blue" %)**3. Select the bin file to burn**
279 279  
280 280  
281 -[[image:image-20220602104144-9.png]]
338 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
282 282  
283 283  
284 -[[image:image-20220602104251-10.png]]
341 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
285 285  
286 286  
287 -[[image:image-20220602104402-11.png]]
344 +(% style="color:red" %)**Preconditions:**
288 288  
346 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
289 289  
348 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
290 290  
291 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
292 -(% style="color:blue" %)**4. Click to start the download**
293 293  
294 -[[image:image-20220602104923-13.png]]
295 295  
352 +(% style="color:blue" %)**Steps for usage:**
296 296  
354 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
297 297  
298 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
299 -(% style="color:blue" %)**5. Check update process**
356 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
300 300  
358 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
301 301  
302 -[[image:image-20220602104948-14.png]]
303 303  
304 304  
362 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
305 305  
306 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
307 -(% style="color:blue" %)**The following picture shows that the burning is successful**
308 308  
309 -[[image:image-20220602105251-15.png]]
365 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
310 310  
311 311  
368 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
312 312  
313 -= 2.  FAQ =
370 +[[image:image-20220602171233-2.png||height="538" width="800"]]
314 314  
315 315  
316 -== 2.1  How to Compile Source Code for LA66? ==
317 317  
374 +(% style="color:blue" %)**2. Install Minicom in RPi.**
318 318  
319 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
376 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
320 320  
378 + (% style="background-color:yellow" %)**apt update**
321 321  
380 + (% style="background-color:yellow" %)**apt install minicom**
322 322  
323 -= 3.  Order Info =
324 324  
383 +Use minicom to connect to the RPI's terminal
325 325  
326 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
385 +[[image:image-20220602153146-3.png||height="439" width="500"]]
327 327  
328 328  
388 +
389 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
390 +
391 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
392 +
393 +
394 +[[image:image-20220602154928-5.png||height="436" width="500"]]
395 +
396 +
397 +
398 +(% style="color:blue" %)**4. Send Uplink message**
399 +
400 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
401 +
402 +example: AT+SENDB=01,02,8,05820802581ea0a5
403 +
404 +
405 +[[image:image-20220602160339-6.png||height="517" width="600"]]
406 +
407 +
408 +
409 +Check to see if TTN received the message
410 +
411 +[[image:image-20220602160627-7.png||height="369" width="800"]]
412 +
413 +
414 +
415 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
416 +
417 +
418 +
419 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
420 +
421 +
422 +
423 +
424 += 4.  Order Info =
425 +
426 +
427 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
428 +
429 +
329 329  (% style="color:blue" %)**XXX**(%%): The default frequency band
330 330  
331 331  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -340,9 +340,8 @@
340 340  
341 341  
342 342  
343 -= 4.  Reference =
444 += 5.  Reference =
344 344  
446 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
345 345  
346 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
347 -
348 348  
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0