Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 148.2 >
edited by Xiaoling
on 2022/08/17 08:54
To version < 84.1 >
edited by Edwin Chen
on 2022/07/10 22:06
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,64 +1,28 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
11 11  
12 -
13 -== 1.1  Overview ==
14 -
15 -
16 -(((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 -)))
27 -
28 -(((
29 -(((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 -)))
32 -)))
33 -
34 -(((
35 -(((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 -)))
38 -)))
39 39  
40 -(((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 -)))
44 -)))
45 45  
46 -(((
47 -(((
48 48  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 -)))
50 -)))
51 51  
52 52  
20 +== Features ==
53 53  
54 -== 1.2  Features ==
55 -
56 -
57 -* Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
22 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 -* SMA connector
25 +* SMD Antenna pad and i-pex antenna connector
62 62  * Available in different frequency LoRaWAN frequency bands.
63 63  * World-wide unique OTAA keys.
64 64  * AT Command via UART-TTL interface
... ... @@ -65,9 +65,8 @@
65 65  * Firmware upgradable via UART interface
66 66  * Ultra-long RF range
67 67  
68 -== 1.3  Specification ==
32 +== Specification ==
69 69  
70 -
71 71  * CPU: 32-bit 48 MHz
72 72  * Flash: 256KB
73 73  * RAM: 64KB
... ... @@ -86,251 +86,365 @@
86 86  * LoRa Rx current: <9 mA
87 87  * I/O Voltage: 3.3v
88 88  
52 +== AT Command ==
89 89  
54 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
90 90  
91 -== 1.4  Pin Mapping & LED ==
92 92  
57 +== Dimension ==
93 93  
94 -[[image:image-20220817085048-1.png]]
59 +[[image:image-20220517072526-1.png]]
95 95  
96 96  
97 -~1. The LED lights up red when there is an upstream data packet
98 -2. When the network is successfully connected, the green light will be on for 5 seconds
99 -3. Purple light on when receiving downlink data packets
62 +== Pin Mapping ==
100 100  
64 +[[image:image-20220523101537-1.png]]
101 101  
66 +== Land Pattern ==
102 102  
103 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
68 +[[image:image-20220517072821-2.png]]
104 104  
105 105  
106 -**Show connection diagram：**
71 +== Order Info ==
107 107  
73 +Part Number: **LA66-XXX**
108 108  
109 -[[image:image-20220723170210-2.png||height="908" width="681"]]
75 +**XX**: The default frequency band
110 110  
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
111 111  
87 += LA66 LoRaWAN Shield =
112 112  
113 -(% style="color:blue" %)**1.  open Arduino IDE**
89 +== Overview ==
114 114  
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
115 115  
116 -[[image:image-20220723170545-4.png]]
117 117  
94 +== Features ==
118 118  
96 +* Arduino Shield base on LA66 LoRaWAN module
97 +* Support LoRaWAN v1.0.4 protocol
98 +* Support peer-to-peer protocol
99 +* TCXO crystal to ensure RF performance on low temperature
100 +* SMA connector
101 +* Available in different frequency LoRaWAN frequency bands.
102 +* World-wide unique OTAA keys.
103 +* AT Command via UART-TTL interface
104 +* Firmware upgradable via UART interface
105 +* Ultra-long RF range
119 119  
120 -(% style="color:blue" %)**2.  Open project**
107 +== Specification ==
121 121  
109 +* CPU: 32-bit 48 MHz
110 +* Flash: 256KB
111 +* RAM: 64KB
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
114 +* Frequency Range: 150 MHz ~~ 960 MHz
115 +* Maximum Power +22 dBm constant RF output
116 +* High sensitivity: -148 dBm
117 +* Temperature:
118 +** Storage: -55 ~~ +125℃
119 +** Operating: -40 ~~ +85℃
120 +* Humidity:
121 +** Storage: 5 ~~ 95% (Non-Condensing)
122 +** Operating: 10 ~~ 95% (Non-Condensing)
123 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 +* LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
122 122  
123 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
127 +== Pin Mapping & LED ==
124 124  
125 -[[image:image-20220726135239-1.png]]
129 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
126 126  
131 +== Example: Join TTN network and send an uplink message, get downlink message. ==
127 127  
128 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
133 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
129 129  
130 -[[image:image-20220726135356-2.png]]
135 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
131 131  
137 +=== Items needed for update ===
132 132  
133 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
139 +1. LA66 LoRaWAN Shield
140 +1. Arduino
141 +1. USB TO TTL Adapter
134 134  
143 +[[image:image-20220602100052-2.png||height="385" width="600"]]
135 135  
136 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
137 137  
146 +=== Connection ===
138 138  
148 +[[image:image-20220602101311-3.png||height="276" width="600"]]
139 139  
140 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
150 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 +**GND  <-> GND
152 +TXD  <-> TXD
153 +RXD  <-> RXD**
141 141  
155 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
142 142  
143 -(% style="color:blue" %)**1.  Open project**
157 +Connect USB TTL Adapter to PC after connecting the wires
144 144  
145 145  
146 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
160 +[[image:image-20220602102240-4.png||height="304" width="600"]]
147 147  
148 148  
149 -[[image:image-20220723172502-8.png]]
163 +=== Upgrade steps ===
150 150  
165 +==== Switch SW1 to put in ISP position ====
151 151  
167 +[[image:image-20220602102824-5.png||height="306" width="600"]]
152 152  
153 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
154 154  
170 +==== Press the RST switch once ====
155 155  
156 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
172 +[[image:image-20220602104701-12.png||height="285" width="600"]]
157 157  
158 158  
175 +==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
159 159  
160 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
177 +**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
161 161  
179 +[[image:image-20220602103227-6.png]]
162 162  
163 -(% style="color:blue" %)**1.  Open project**
181 +[[image:image-20220602103357-7.png]]
164 164  
165 165  
166 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
184 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
185 +**2. Select the COM port corresponding to USB TTL**
167 167  
187 +[[image:image-20220602103844-8.png]]
168 168  
169 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
170 170  
190 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
191 +**3. Select the bin file to burn**
171 171  
193 +[[image:image-20220602104144-9.png]]
172 172  
173 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
195 +[[image:image-20220602104251-10.png]]
174 174  
197 +[[image:image-20220602104402-11.png]]
175 175  
176 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
177 177  
200 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
201 +**4. Click to start the download**
178 178  
203 +[[image:image-20220602104923-13.png]]
179 179  
180 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
181 181  
182 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
206 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
207 +**5. Check update process**
183 183  
184 -[[image:image-20220723175700-12.png||height="602" width="995"]]
209 +[[image:image-20220602104948-14.png]]
185 185  
186 186  
212 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
213 +**The following picture shows that the burning is successful**
187 187  
188 -== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
215 +[[image:image-20220602105251-15.png]]
189 189  
190 190  
191 -=== 1.8.1  Items needed for update ===
218 +== Order Info ==
192 192  
220 +Part Number: **LA66-LoRaWAN-Shield-XXX**
193 193  
194 -1. LA66 LoRaWAN Shield
195 -1. Arduino
196 -1. USB TO TTL Adapter
222 +**XX**: The default frequency band
197 197  
198 -[[image:image-20220602100052-2.png||height="385" width="600"]]
224 +* **AS923**: LoRaWAN AS923 band
225 +* **AU915**: LoRaWAN AU915 band
226 +* **EU433**: LoRaWAN EU433 band
227 +* **EU868**: LoRaWAN EU868 band
228 +* **KR920**: LoRaWAN KR920 band
229 +* **US915**: LoRaWAN US915 band
230 +* **IN865**: LoRaWAN IN865 band
231 +* **CN470**: LoRaWAN CN470 band
232 +* **PP**: Peer to Peer LoRa Protocol
199 199  
234 +== Package Info ==
200 200  
236 +* LA66 LoRaWAN Shield x 1
237 +* RF Antenna x 1
201 201  
202 -=== 1.8.2  Connection ===
239 += LA66 USB LoRaWAN Adapter =
203 203  
241 +== Overview ==
204 204  
205 -[[image:image-20220602101311-3.png||height="276" width="600"]]
243 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
206 206  
207 207  
208 -(((
209 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
210 -)))
246 +== Features ==
211 211  
212 -(((
213 -(% style="background-color:yellow" %)**GND  <-> GND
214 -TXD  <->  TXD
215 -RXD  <->  RXD**
216 -)))
248 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
249 +* Ultra-long RF range
250 +* Support LoRaWAN v1.0.4 protocol
251 +* Support peer-to-peer protocol
252 +* TCXO crystal to ensure RF performance on low temperature
253 +* Spring RF antenna
254 +* Available in different frequency LoRaWAN frequency bands.
255 +* World-wide unique OTAA keys.
256 +* AT Command via UART-TTL interface
257 +* Firmware upgradable via UART interface
217 217  
259 +== Specification ==
218 218  
219 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
261 +* CPU: 32-bit 48 MHz
262 +* Flash: 256KB
263 +* RAM: 64KB
264 +* Input Power Range: 5v
265 +* Frequency Range: 150 MHz ~~ 960 MHz
266 +* Maximum Power +22 dBm constant RF output
267 +* High sensitivity: -148 dBm
268 +* Temperature:
269 +** Storage: -55 ~~ +125℃
270 +** Operating: -40 ~~ +85℃
271 +* Humidity:
272 +** Storage: 5 ~~ 95% (Non-Condensing)
273 +** Operating: 10 ~~ 95% (Non-Condensing)
274 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
275 +* LoRa Rx current: <9 mA
220 220  
221 -Connect USB TTL Adapter to PC after connecting the wires
277 +== Pin Mapping & LED ==
222 222  
279 +== Example Send & Get Messages via LoRaWAN in PC ==
223 223  
224 -[[image:image-20220602102240-4.png||height="304" width="600"]]
281 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
225 225  
283 +~1. Connect the LA66 USB LoRaWAN adapter to PC
226 226  
285 +[[image:image-20220602171217-1.png||height="538" width="800"]]
227 227  
228 -=== 1.8.3  Upgrade steps ===
287 +Open the serial port tool
229 229  
289 +[[image:image-20220602161617-8.png]]
230 230  
291 +[[image:image-20220602161718-9.png||height="457" width="800"]]
231 231  
232 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
233 233  
294 +2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
234 234  
235 -[[image:image-20220602102824-5.png||height="306" width="600"]]
296 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
236 236  
298 +[[image:image-20220602161935-10.png||height="498" width="800"]]
237 237  
238 238  
239 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
301 +3. See Uplink Command
240 240  
303 +Command format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
241 241  
242 -[[image:image-20220817085447-1.png]]
305 +example: AT+SENDB=01,02,8,05820802581ea0a5
243 243  
307 +[[image:image-20220602162157-11.png||height="497" width="800"]]
244 244  
245 245  
246 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
310 +4. Check to see if TTN received the message
247 247  
312 +[[image:image-20220602162331-12.png||height="420" width="800"]]
248 248  
249 -(((
250 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
251 -)))
252 252  
253 253  
254 -[[image:image-20220602103227-6.png]]
316 +== Example: Send PC's CPU/RAM usage to TTN via python ==
255 255  
318 +(% class="wikigeneratedid" id="HUsepythonasanexampleFF1A" %)
319 +**Use python as an example：**
256 256  
257 -[[image:image-20220602103357-7.png]]
321 +(% class="wikigeneratedid" id="HPreconditions:" %)
322 +**Preconditions:**
258 258  
324 +1.LA66 USB LoRaWAN Adapter works fine
259 259  
326 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
260 260  
261 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
262 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
328 +(% class="wikigeneratedid" id="HStepsforusage" %)
329 +**Steps for usage**
263 263  
331 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
264 264  
265 -[[image:image-20220602103844-8.png]]
333 +2.Run the python script in PC and see the TTN
266 266  
335 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
267 267  
268 268  
269 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
270 -(% style="color:blue" %)**3. Select the bin file to burn**
271 271  
339 +== Example Send & Get Messages via LoRaWAN in RPi ==
272 272  
273 -[[image:image-20220602104144-9.png]]
341 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
274 274  
343 +~1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
275 275  
276 -[[image:image-20220602104251-10.png]]
345 +[[image:image-20220602171233-2.png||height="538" width="800"]]
277 277  
278 278  
279 -[[image:image-20220602104402-11.png]]
348 +2. Install Minicom in RPi.
280 280  
350 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
281 281  
352 +(% class="mark" %)apt update
282 282  
283 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
284 -(% style="color:blue" %)**4. Click to start the download**
354 +(% class="mark" %)apt install minicom
285 285  
286 -[[image:image-20220602104923-13.png]]
287 287  
357 +Use minicom to connect to the RPI's terminal
288 288  
359 +[[image:image-20220602153146-3.png||height="439" width="500"]]
289 289  
290 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
291 -(% style="color:blue" %)**5. Check update process**
292 292  
362 +3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.
363 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
293 293  
294 -[[image:image-20220602104948-14.png]]
365 +[[image:image-20220602154928-5.png||height="436" width="500"]]
295 295  
296 296  
368 +4. Send Uplink message
297 297  
298 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
299 -(% style="color:blue" %)**The following picture shows that the burning is successful**
370 +Format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
300 300  
301 -[[image:image-20220602105251-15.png]]
372 +example: AT+SENDB=01,02,8,05820802581ea0a5
302 302  
374 +[[image:image-20220602160339-6.png||height="517" width="600"]]
303 303  
376 +Check to see if TTN received the message
304 304  
305 -= 2.  FAQ =
378 +[[image:image-20220602160627-7.png||height="369" width="800"]]
306 306  
307 307  
308 -== 2.1  How to Compile Source Code for LA66? ==
309 309  
382 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
310 310  
311 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
312 312  
385 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
313 313  
314 314  
315 -= 3.  Order Info =
316 316  
389 +== Order Info ==
317 317  
318 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
391 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
319 319  
393 +**XX**: The default frequency band
320 320  
321 -(% style="color:blue" %)**XXX**(%%): The default frequency band
395 +* **AS923**: LoRaWAN AS923 band
396 +* **AU915**: LoRaWAN AU915 band
397 +* **EU433**: LoRaWAN EU433 band
398 +* **EU868**: LoRaWAN EU868 band
399 +* **KR920**: LoRaWAN KR920 band
400 +* **US915**: LoRaWAN US915 band
401 +* **IN865**: LoRaWAN IN865 band
402 +* **CN470**: LoRaWAN CN470 band
403 +* **PP**: Peer to Peer LoRa Protocol
322 322  
323 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
324 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
325 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
326 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
327 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
328 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
329 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
330 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
331 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
405 +== Package Info ==
332 332  
333 -= 4.  Reference =
407 +* LA66 USB LoRaWAN Adapter x 1
334 334  
409 += Reference =
335 335  
336 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
411 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
412 +
413 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -467.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0