Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 147.3 >
edited by Xiaoling
on 2022/08/17 08:53
To version < 84.1 >
edited by Edwin Chen
on 2022/07/10 22:06
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,64 +1,28 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
11 11  
12 -
13 -== 1.1  Overview ==
14 -
15 -
16 -(((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 -)))
27 -
28 -(((
29 -(((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 -)))
32 -)))
33 -
34 -(((
35 -(((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 -)))
38 -)))
39 39  
40 -(((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 -)))
44 -)))
45 45  
46 -(((
47 -(((
48 48  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 -)))
50 -)))
51 51  
52 52  
20 +== Features ==
53 53  
54 -== 1.2  Features ==
55 -
56 -
57 -* Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
22 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 -* SMA connector
25 +* SMD Antenna pad and i-pex antenna connector
62 62  * Available in different frequency LoRaWAN frequency bands.
63 63  * World-wide unique OTAA keys.
64 64  * AT Command via UART-TTL interface
... ... @@ -65,10 +65,8 @@
65 65  * Firmware upgradable via UART interface
66 66  * Ultra-long RF range
67 67  
32 +== Specification ==
68 68  
69 -== 1.3  Specification ==
70 -
71 -
72 72  * CPU: 32-bit 48 MHz
73 73  * Flash: 256KB
74 74  * RAM: 64KB
... ... @@ -87,252 +87,365 @@
87 87  * LoRa Rx current: <9 mA
88 88  * I/O Voltage: 3.3v
89 89  
52 +== AT Command ==
90 90  
54 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
91 91  
92 92  
93 -== 1.4  Pin Mapping & LED ==
57 +== Dimension ==
94 94  
59 +[[image:image-20220517072526-1.png]]
95 95  
96 -[[image:image-20220817085048-1.png]]
97 97  
62 +== Pin Mapping ==
98 98  
99 -~1. The LED lights up red when there is an upstream data packet
100 -2. When the network is successfully connected, the green light will be on for 5 seconds
101 -3. Purple light on when receiving downlink data packets
64 +[[image:image-20220523101537-1.png]]
102 102  
66 +== Land Pattern ==
103 103  
68 +[[image:image-20220517072821-2.png]]
104 104  
105 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
106 106  
71 +== Order Info ==
107 107  
108 -**Show connection diagram：**
73 +Part Number: **LA66-XXX**
109 109  
75 +**XX**: The default frequency band
110 110  
111 -[[image:image-20220723170210-2.png||height="908" width="681"]]
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
112 112  
87 += LA66 LoRaWAN Shield =
113 113  
89 +== Overview ==
114 114  
115 -(% style="color:blue" %)**1.  open Arduino IDE**
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
116 116  
117 117  
118 -[[image:image-20220723170545-4.png]]
94 +== Features ==
119 119  
96 +* Arduino Shield base on LA66 LoRaWAN module
97 +* Support LoRaWAN v1.0.4 protocol
98 +* Support peer-to-peer protocol
99 +* TCXO crystal to ensure RF performance on low temperature
100 +* SMA connector
101 +* Available in different frequency LoRaWAN frequency bands.
102 +* World-wide unique OTAA keys.
103 +* AT Command via UART-TTL interface
104 +* Firmware upgradable via UART interface
105 +* Ultra-long RF range
120 120  
107 +== Specification ==
121 121  
122 -(% style="color:blue" %)**2.  Open project**
109 +* CPU: 32-bit 48 MHz
110 +* Flash: 256KB
111 +* RAM: 64KB
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
114 +* Frequency Range: 150 MHz ~~ 960 MHz
115 +* Maximum Power +22 dBm constant RF output
116 +* High sensitivity: -148 dBm
117 +* Temperature:
118 +** Storage: -55 ~~ +125℃
119 +** Operating: -40 ~~ +85℃
120 +* Humidity:
121 +** Storage: 5 ~~ 95% (Non-Condensing)
122 +** Operating: 10 ~~ 95% (Non-Condensing)
123 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 +* LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
123 123  
127 +== Pin Mapping & LED ==
124 124  
125 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
129 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
126 126  
127 -[[image:image-20220726135239-1.png]]
131 +== Example: Join TTN network and send an uplink message, get downlink message. ==
128 128  
133 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
129 129  
130 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
135 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
131 131  
132 -[[image:image-20220726135356-2.png]]
137 +=== Items needed for update ===
133 133  
139 +1. LA66 LoRaWAN Shield
140 +1. Arduino
141 +1. USB TO TTL Adapter
134 134  
135 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
143 +[[image:image-20220602100052-2.png||height="385" width="600"]]
136 136  
137 137  
138 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
146 +=== Connection ===
139 139  
148 +[[image:image-20220602101311-3.png||height="276" width="600"]]
140 140  
150 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 +**GND  <-> GND
152 +TXD  <-> TXD
153 +RXD  <-> RXD**
141 141  
142 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
155 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
143 143  
157 +Connect USB TTL Adapter to PC after connecting the wires
144 144  
145 -(% style="color:blue" %)**1.  Open project**
146 146  
160 +[[image:image-20220602102240-4.png||height="304" width="600"]]
147 147  
148 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
149 149  
163 +=== Upgrade steps ===
150 150  
151 -[[image:image-20220723172502-8.png]]
165 +==== Switch SW1 to put in ISP position ====
152 152  
167 +[[image:image-20220602102824-5.png||height="306" width="600"]]
153 153  
154 154  
155 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
170 +==== Press the RST switch once ====
156 156  
172 +[[image:image-20220602104701-12.png||height="285" width="600"]]
157 157  
158 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
159 159  
175 +==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
160 160  
177 +**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
161 161  
162 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
179 +[[image:image-20220602103227-6.png]]
163 163  
181 +[[image:image-20220602103357-7.png]]
164 164  
165 -(% style="color:blue" %)**1.  Open project**
166 166  
184 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
185 +**2. Select the COM port corresponding to USB TTL**
167 167  
168 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
187 +[[image:image-20220602103844-8.png]]
169 169  
170 170  
171 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
190 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
191 +**3. Select the bin file to burn**
172 172  
193 +[[image:image-20220602104144-9.png]]
173 173  
195 +[[image:image-20220602104251-10.png]]
174 174  
175 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
197 +[[image:image-20220602104402-11.png]]
176 176  
177 177  
178 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
200 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
201 +**4. Click to start the download**
179 179  
203 +[[image:image-20220602104923-13.png]]
180 180  
181 181  
182 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
206 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
207 +**5. Check update process**
183 183  
184 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
209 +[[image:image-20220602104948-14.png]]
185 185  
186 -[[image:image-20220723175700-12.png||height="602" width="995"]]
187 187  
212 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
213 +**The following picture shows that the burning is successful**
188 188  
215 +[[image:image-20220602105251-15.png]]
189 189  
190 -== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
191 191  
218 +== Order Info ==
192 192  
193 -=== 1.8.1  Items needed for update ===
220 +Part Number: **LA66-LoRaWAN-Shield-XXX**
194 194  
222 +**XX**: The default frequency band
195 195  
196 -1. LA66 LoRaWAN Shield
197 -1. Arduino
198 -1. USB TO TTL Adapter
224 +* **AS923**: LoRaWAN AS923 band
225 +* **AU915**: LoRaWAN AU915 band
226 +* **EU433**: LoRaWAN EU433 band
227 +* **EU868**: LoRaWAN EU868 band
228 +* **KR920**: LoRaWAN KR920 band
229 +* **US915**: LoRaWAN US915 band
230 +* **IN865**: LoRaWAN IN865 band
231 +* **CN470**: LoRaWAN CN470 band
232 +* **PP**: Peer to Peer LoRa Protocol
199 199  
200 -[[image:image-20220602100052-2.png||height="385" width="600"]]
234 +== Package Info ==
201 201  
236 +* LA66 LoRaWAN Shield x 1
237 +* RF Antenna x 1
202 202  
239 += LA66 USB LoRaWAN Adapter =
203 203  
204 -=== 1.8.2  Connection ===
241 +== Overview ==
205 205  
243 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
206 206  
207 -[[image:image-20220602101311-3.png||height="276" width="600"]]
208 208  
246 +== Features ==
209 209  
210 -(((
211 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
212 -)))
248 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
249 +* Ultra-long RF range
250 +* Support LoRaWAN v1.0.4 protocol
251 +* Support peer-to-peer protocol
252 +* TCXO crystal to ensure RF performance on low temperature
253 +* Spring RF antenna
254 +* Available in different frequency LoRaWAN frequency bands.
255 +* World-wide unique OTAA keys.
256 +* AT Command via UART-TTL interface
257 +* Firmware upgradable via UART interface
213 213  
214 -(((
215 -(% style="background-color:yellow" %)**GND  <-> GND
216 -TXD  <->  TXD
217 -RXD  <->  RXD**
218 -)))
259 +== Specification ==
219 219  
261 +* CPU: 32-bit 48 MHz
262 +* Flash: 256KB
263 +* RAM: 64KB
264 +* Input Power Range: 5v
265 +* Frequency Range: 150 MHz ~~ 960 MHz
266 +* Maximum Power +22 dBm constant RF output
267 +* High sensitivity: -148 dBm
268 +* Temperature:
269 +** Storage: -55 ~~ +125℃
270 +** Operating: -40 ~~ +85℃
271 +* Humidity:
272 +** Storage: 5 ~~ 95% (Non-Condensing)
273 +** Operating: 10 ~~ 95% (Non-Condensing)
274 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
275 +* LoRa Rx current: <9 mA
220 220  
221 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
277 +== Pin Mapping & LED ==
222 222  
223 -Connect USB TTL Adapter to PC after connecting the wires
279 +== Example Send & Get Messages via LoRaWAN in PC ==
224 224  
281 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
225 225  
226 -[[image:image-20220602102240-4.png||height="304" width="600"]]
283 +~1. Connect the LA66 USB LoRaWAN adapter to PC
227 227  
285 +[[image:image-20220602171217-1.png||height="538" width="800"]]
228 228  
287 +Open the serial port tool
229 229  
230 -=== 1.8.3  Upgrade steps ===
289 +[[image:image-20220602161617-8.png]]
231 231  
291 +[[image:image-20220602161718-9.png||height="457" width="800"]]
232 232  
233 233  
234 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
294 +2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
235 235  
296 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
236 236  
237 -[[image:image-20220602102824-5.png||height="306" width="600"]]
298 +[[image:image-20220602161935-10.png||height="498" width="800"]]
238 238  
239 239  
301 +3. See Uplink Command
240 240  
241 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
303 +Command format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
242 242  
305 +example: AT+SENDB=01,02,8,05820802581ea0a5
243 243  
244 -[[image:image-20220602104701-12.png||height="285" width="600"]]
307 +[[image:image-20220602162157-11.png||height="497" width="800"]]
245 245  
246 246  
310 +4. Check to see if TTN received the message
247 247  
248 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
312 +[[image:image-20220602162331-12.png||height="420" width="800"]]
249 249  
250 250  
251 -(((
252 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
253 -)))
254 254  
316 +== Example: Send PC's CPU/RAM usage to TTN via python ==
255 255  
256 -[[image:image-20220602103227-6.png]]
318 +(% class="wikigeneratedid" id="HUsepythonasanexampleFF1A" %)
319 +**Use python as an example：**
257 257  
321 +(% class="wikigeneratedid" id="HPreconditions:" %)
322 +**Preconditions:**
258 258  
259 -[[image:image-20220602103357-7.png]]
324 +1.LA66 USB LoRaWAN Adapter works fine
260 260  
326 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
261 261  
328 +(% class="wikigeneratedid" id="HStepsforusage" %)
329 +**Steps for usage**
262 262  
263 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
264 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
331 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
265 265  
333 +2.Run the python script in PC and see the TTN
266 266  
267 -[[image:image-20220602103844-8.png]]
335 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
268 268  
269 269  
270 270  
271 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
272 -(% style="color:blue" %)**3. Select the bin file to burn**
339 +== Example Send & Get Messages via LoRaWAN in RPi ==
273 273  
341 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
274 274  
275 -[[image:image-20220602104144-9.png]]
343 +~1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
276 276  
345 +[[image:image-20220602171233-2.png||height="538" width="800"]]
277 277  
278 -[[image:image-20220602104251-10.png]]
279 279  
348 +2. Install Minicom in RPi.
280 280  
281 -[[image:image-20220602104402-11.png]]
350 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
282 282  
352 +(% class="mark" %)apt update
283 283  
354 +(% class="mark" %)apt install minicom
284 284  
285 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
286 -(% style="color:blue" %)**4. Click to start the download**
287 287  
288 -[[image:image-20220602104923-13.png]]
357 +Use minicom to connect to the RPI's terminal
289 289  
359 +[[image:image-20220602153146-3.png||height="439" width="500"]]
290 290  
291 291  
292 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
293 -(% style="color:blue" %)**5. Check update process**
362 +3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.
363 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
294 294  
365 +[[image:image-20220602154928-5.png||height="436" width="500"]]
295 295  
296 -[[image:image-20220602104948-14.png]]
297 297  
368 +4. Send Uplink message
298 298  
370 +Format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
299 299  
300 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
301 -(% style="color:blue" %)**The following picture shows that the burning is successful**
372 +example: AT+SENDB=01,02,8,05820802581ea0a5
302 302  
303 -[[image:image-20220602105251-15.png]]
374 +[[image:image-20220602160339-6.png||height="517" width="600"]]
304 304  
376 +Check to see if TTN received the message
305 305  
378 +[[image:image-20220602160627-7.png||height="369" width="800"]]
306 306  
307 -= 2.  FAQ =
308 308  
309 309  
310 -== 2.1  How to Compile Source Code for LA66? ==
382 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
311 311  
312 312  
313 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
385 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
314 314  
315 315  
316 316  
317 -= 3.  Order Info =
389 +== Order Info ==
318 318  
391 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
319 319  
320 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
393 +**XX**: The default frequency band
321 321  
395 +* **AS923**: LoRaWAN AS923 band
396 +* **AU915**: LoRaWAN AU915 band
397 +* **EU433**: LoRaWAN EU433 band
398 +* **EU868**: LoRaWAN EU868 band
399 +* **KR920**: LoRaWAN KR920 band
400 +* **US915**: LoRaWAN US915 band
401 +* **IN865**: LoRaWAN IN865 band
402 +* **CN470**: LoRaWAN CN470 band
403 +* **PP**: Peer to Peer LoRa Protocol
322 322  
323 -(% style="color:blue" %)**XXX**(%%): The default frequency band
405 +== Package Info ==
324 324  
325 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
326 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
327 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
328 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
329 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
330 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
331 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
332 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
333 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
407 +* LA66 USB LoRaWAN Adapter x 1
334 334  
335 -= 4.  Reference =
409 += Reference =
336 336  
411 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
337 337  
338 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
413 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0