Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 147.3 >
edited by Xiaoling
on 2022/08/17 08:53
To version < 73.1 >
edited by Edwin Chen
on 2022/07/03 00:12
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,64 +1,28 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
11 11  
12 -
13 -== 1.1  Overview ==
14 -
15 -
16 -(((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 -)))
27 -
28 -(((
29 -(((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 -)))
32 -)))
33 -
34 -(((
35 -(((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 -)))
38 -)))
39 39  
40 -(((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 -)))
44 -)))
45 45  
46 -(((
47 -(((
48 48  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 -)))
50 -)))
51 51  
52 52  
20 +== Features ==
53 53  
54 -== 1.2  Features ==
55 -
56 -
57 -* Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
22 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 -* SMA connector
25 +* SMD Antenna pad and i-pex antenna connector
62 62  * Available in different frequency LoRaWAN frequency bands.
63 63  * World-wide unique OTAA keys.
64 64  * AT Command via UART-TTL interface
... ... @@ -65,10 +65,8 @@
65 65  * Firmware upgradable via UART interface
66 66  * Ultra-long RF range
67 67  
32 +== Specification ==
68 68  
69 -== 1.3  Specification ==
70 -
71 -
72 72  * CPU: 32-bit 48 MHz
73 73  * Flash: 256KB
74 74  * RAM: 64KB
... ... @@ -87,252 +87,340 @@
87 87  * LoRa Rx current: <9 mA
88 88  * I/O Voltage: 3.3v
89 89  
52 +== AT Command ==
90 90  
54 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
91 91  
92 92  
93 -== 1.4  Pin Mapping & LED ==
57 +== Dimension ==
94 94  
59 +[[image:image-20220517072526-1.png]]
95 95  
96 -[[image:image-20220817085048-1.png]]
97 97  
62 +== Pin Mapping ==
98 98  
99 -~1. The LED lights up red when there is an upstream data packet
100 -2. When the network is successfully connected, the green light will be on for 5 seconds
101 -3. Purple light on when receiving downlink data packets
64 +[[image:image-20220523101537-1.png]]
102 102  
66 +== Land Pattern ==
103 103  
68 +[[image:image-20220517072821-2.png]]
104 104  
105 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
106 106  
71 +== Order Info ==
107 107  
108 -**Show connection diagram：**
73 +Part Number: **LA66-XXX**
109 109  
75 +**XX**: The default frequency band
110 110  
111 -[[image:image-20220723170210-2.png||height="908" width="681"]]
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
112 112  
87 += LA66 LoRaWAN Shield =
113 113  
89 +== Overview ==
114 114  
115 -(% style="color:blue" %)**1.  open Arduino IDE**
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
116 116  
117 117  
118 -[[image:image-20220723170545-4.png]]
94 +== Features ==
119 119  
96 +* Arduino Shield base on LA66 LoRaWAN module
97 +* Support LoRaWAN v1.0.4 protocol
98 +* Support peer-to-peer protocol
99 +* TCXO crystal to ensure RF performance on low temperature
100 +* SMA connector
101 +* Available in different frequency LoRaWAN frequency bands.
102 +* World-wide unique OTAA keys.
103 +* AT Command via UART-TTL interface
104 +* Firmware upgradable via UART interface
105 +* Ultra-long RF range
120 120  
107 +== Specification ==
121 121  
122 -(% style="color:blue" %)**2.  Open project**
109 +* CPU: 32-bit 48 MHz
110 +* Flash: 256KB
111 +* RAM: 64KB
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
114 +* Frequency Range: 150 MHz ~~ 960 MHz
115 +* Maximum Power +22 dBm constant RF output
116 +* High sensitivity: -148 dBm
117 +* Temperature:
118 +** Storage: -55 ~~ +125℃
119 +** Operating: -40 ~~ +85℃
120 +* Humidity:
121 +** Storage: 5 ~~ 95% (Non-Condensing)
122 +** Operating: 10 ~~ 95% (Non-Condensing)
123 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 +* LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
123 123  
127 +== Pin Mapping & LED ==
124 124  
125 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
129 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
126 126  
127 -[[image:image-20220726135239-1.png]]
131 +== Example: Join TTN network and send an uplink message, get downlink message. ==
128 128  
133 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
129 129  
130 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
135 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
131 131  
132 -[[image:image-20220726135356-2.png]]
137 +=== what needs to be used ===
133 133  
139 +1.LA66 LoRaWAN Shield that needs to be upgraded
134 134  
135 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
141 +2.Arduino
136 136  
143 +3.USB TO TTL
137 137  
138 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
145 +[[image:image-20220602100052-2.png]]
139 139  
147 +=== Wiring Schematic ===
140 140  
149 +[[image:image-20220602101311-3.png]]
141 141  
142 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
151 +LA66 LoRaWAN Shield  >>>>>>>>>>>>USB TTL
143 143  
153 +GND  >>>>>>>>>>>>GND
144 144  
145 -(% style="color:blue" %)**1.  Open project**
155 +TXD  >>>>>>>>>>>>TXD
146 146  
157 +RXD  >>>>>>>>>>>>RXD
147 147  
148 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
159 +JP6 of LA66 LoRaWAN Shield needs to be connected with yellow jumper cap
149 149  
161 +Connect to the PC after connecting the wires
150 150  
151 -[[image:image-20220723172502-8.png]]
163 +[[image:image-20220602102240-4.png]]
152 152  
165 +=== Upgrade steps ===
153 153  
167 +==== Dial the SW1 of the LA66 LoRaWAN Shield to the ISP's location as shown in the figure below ====
154 154  
155 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
169 +[[image:image-20220602102824-5.png]]
156 156  
171 +==== Press the RST switch on the LA66 LoRaWAN Shield once ====
157 157  
158 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
173 +[[image:image-20220602104701-12.png]]
159 159  
175 +==== Open the upgrade application software ====
160 160  
177 +Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
161 161  
162 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
179 +[[image:image-20220602103227-6.png]]
163 163  
181 +[[image:image-20220602103357-7.png]]
164 164  
165 -(% style="color:blue" %)**1.  Open project**
183 +===== Select the COM port corresponding to USB TTL =====
166 166  
185 +[[image:image-20220602103844-8.png]]
167 167  
168 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
187 +===== Select the bin file to burn =====
169 169  
189 +[[image:image-20220602104144-9.png]]
170 170  
171 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
191 +[[image:image-20220602104251-10.png]]
172 172  
193 +[[image:image-20220602104402-11.png]]
173 173  
195 +===== Click to start the download =====
174 174  
175 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
197 +[[image:image-20220602104923-13.png]]
176 176  
199 +===== The following figure appears to prove that the burning is in progress =====
177 177  
178 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
201 +[[image:image-20220602104948-14.png]]
179 179  
203 +===== The following picture appears to prove that the burning is successful =====
180 180  
205 +[[image:image-20220602105251-15.png]]
181 181  
182 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
183 183  
184 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
208 +== Order Info ==
185 185  
186 -[[image:image-20220723175700-12.png||height="602" width="995"]]
210 +Part Number: **LA66-LoRaWAN-Shield-XXX**
187 187  
212 +**XX**: The default frequency band
188 188  
214 +* **AS923**: LoRaWAN AS923 band
215 +* **AU915**: LoRaWAN AU915 band
216 +* **EU433**: LoRaWAN EU433 band
217 +* **EU868**: LoRaWAN EU868 band
218 +* **KR920**: LoRaWAN KR920 band
219 +* **US915**: LoRaWAN US915 band
220 +* **IN865**: LoRaWAN IN865 band
221 +* **CN470**: LoRaWAN CN470 band
222 +* **PP**: Peer to Peer LoRa Protocol
189 189  
190 -== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
224 +== Package Info ==
191 191  
226 +* LA66 LoRaWAN Shield x 1
227 +* RF Antenna x 1
192 192  
193 -=== 1.8.1  Items needed for update ===
194 194  
195 195  
196 -1. LA66 LoRaWAN Shield
197 -1. Arduino
198 -1. USB TO TTL Adapter
199 199  
200 -[[image:image-20220602100052-2.png||height="385" width="600"]]
232 += LA66 USB LoRaWAN Adapter =
201 201  
234 +== Overview ==
202 202  
236 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
203 203  
204 -=== 1.8.2  Connection ===
205 205  
239 +== Features ==
206 206  
207 -[[image:image-20220602101311-3.png||height="276" width="600"]]
241 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
242 +* Ultra-long RF range
243 +* Support LoRaWAN v1.0.4 protocol
244 +* Support peer-to-peer protocol
245 +* TCXO crystal to ensure RF performance on low temperature
246 +* Spring RF antenna
247 +* Available in different frequency LoRaWAN frequency bands.
248 +* World-wide unique OTAA keys.
249 +* AT Command via UART-TTL interface
250 +* Firmware upgradable via UART interface
208 208  
209 209  
210 -(((
211 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
212 -)))
213 213  
214 -(((
215 -(% style="background-color:yellow" %)**GND  <-> GND
216 -TXD  <->  TXD
217 -RXD  <->  RXD**
218 -)))
254 +== Specification ==
219 219  
256 +* CPU: 32-bit 48 MHz
257 +* Flash: 256KB
258 +* RAM: 64KB
259 +* Input Power Range: 5v
260 +* Frequency Range: 150 MHz ~~ 960 MHz
261 +* Maximum Power +22 dBm constant RF output
262 +* High sensitivity: -148 dBm
263 +* Temperature:
264 +** Storage: -55 ~~ +125℃
265 +** Operating: -40 ~~ +85℃
266 +* Humidity:
267 +** Storage: 5 ~~ 95% (Non-Condensing)
268 +** Operating: 10 ~~ 95% (Non-Condensing)
269 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
270 +* LoRa Rx current: <9 mA
220 220  
221 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
222 222  
223 -Connect USB TTL Adapter to PC after connecting the wires
224 224  
274 +== Pin Mapping & LED ==
225 225  
226 -[[image:image-20220602102240-4.png||height="304" width="600"]]
276 +== Example Send & Get Messages via LoRaWAN in PC ==
227 227  
278 +Connect the LA66 LoRa Shield to the PC
228 228  
280 +[[image:image-20220602171217-1.png||height="615" width="915"]]
229 229  
230 -=== 1.8.3  Upgrade steps ===
282 +Open the serial port tool
231 231  
284 +[[image:image-20220602161617-8.png]]
232 232  
286 +[[image:image-20220602161718-9.png||height="529" width="927"]]
233 233  
234 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
288 +Press the reset switch RST on the LA66 LoRa Shield.
235 235  
290 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
236 236  
237 -[[image:image-20220602102824-5.png||height="306" width="600"]]
292 +[[image:image-20220602161935-10.png]]
238 238  
294 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
239 239  
296 +example: AT+SENDB=01,02,8,05820802581ea0a5
240 240  
241 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
298 +[[image:image-20220602162157-11.png]]
242 242  
300 +Check to see if TTN received the message
243 243  
244 -[[image:image-20220602104701-12.png||height="285" width="600"]]
302 +[[image:image-20220602162331-12.png||height="547" width="1044"]]
245 245  
304 +== Example Send & Get Messages via LoRaWAN in RPi ==
246 246  
306 +Connect the LA66 LoRa Shield to the RPI
247 247  
248 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
308 +[[image:image-20220602171233-2.png||height="592" width="881"]]
249 249  
310 +Log in to the RPI's terminal and connect to the serial port
250 250  
251 -(((
252 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
253 -)))
312 +[[image:image-20220602153146-3.png]]
254 254  
314 +Press the reset switch RST on the LA66 LoRa Shield.
315 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
255 255  
256 -[[image:image-20220602103227-6.png]]
317 +[[image:image-20220602154928-5.png]]
257 257  
319 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
258 258  
259 -[[image:image-20220602103357-7.png]]
321 +example: AT+SENDB=01,02,8,05820802581ea0a5
260 260  
323 +[[image:image-20220602160339-6.png]]
261 261  
325 +Check to see if TTN received the message
262 262  
263 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
264 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
327 +[[image:image-20220602160627-7.png||height="468" width="1013"]]
265 265  
329 +=== Install Minicom ===
266 266  
267 -[[image:image-20220602103844-8.png]]
331 +Enter the following command in the RPI terminal
268 268  
333 +apt update
269 269  
335 +[[image:image-20220602143155-1.png]]
270 270  
271 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
272 -(% style="color:blue" %)**3. Select the bin file to burn**
337 +apt install minicom
273 273  
339 +[[image:image-20220602143744-2.png]]
274 274  
275 -[[image:image-20220602104144-9.png]]
341 +=== Send PC's CPU/RAM usage to TTN via script. ===
276 276  
343 +==== Take python as an example： ====
277 277  
278 -[[image:image-20220602104251-10.png]]
345 +===== Preconditions: =====
279 279  
347 +1.LA66 USB LoRaWAN Adapter works fine
280 280  
281 -[[image:image-20220602104402-11.png]]
349 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
282 282  
351 +===== Steps for usage =====
283 283  
353 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
284 284  
285 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
286 -(% style="color:blue" %)**4. Click to start the download**
355 +2.Run the script and see the TTN
287 287  
288 -[[image:image-20220602104923-13.png]]
357 +[[image:image-20220602115852-3.png]]
289 289  
290 290  
291 291  
292 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
293 -(% style="color:blue" %)**5. Check update process**
361 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
294 294  
295 295  
296 -[[image:image-20220602104948-14.png]]
364 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
297 297  
298 298  
299 299  
300 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
301 -(% style="color:blue" %)**The following picture shows that the burning is successful**
368 +== Order Info ==
302 302  
303 -[[image:image-20220602105251-15.png]]
370 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
304 304  
372 +**XX**: The default frequency band
305 305  
374 +* **AS923**: LoRaWAN AS923 band
375 +* **AU915**: LoRaWAN AU915 band
376 +* **EU433**: LoRaWAN EU433 band
377 +* **EU868**: LoRaWAN EU868 band
378 +* **KR920**: LoRaWAN KR920 band
379 +* **US915**: LoRaWAN US915 band
380 +* **IN865**: LoRaWAN IN865 band
381 +* **CN470**: LoRaWAN CN470 band
382 +* **PP**: Peer to Peer LoRa Protocol
306 306  
307 -= 2.  FAQ =
384 +== Package Info ==
308 308  
386 +* LA66 USB LoRaWAN Adapter x 1
309 309  
310 -== 2.1  How to Compile Source Code for LA66? ==
311 -
312 -
313 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
314 -
315 -
316 -
317 -= 3.  Order Info =
318 -
319 -
320 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
321 -
322 -
323 -(% style="color:blue" %)**XXX**(%%): The default frequency band
324 -
325 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
326 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
327 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
328 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
329 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
330 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
331 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
332 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
333 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
334 -
335 -= 4.  Reference =
336 -
337 -
338 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
388 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0