Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 147.2 >
edited by Xiaoling
on 2022/08/17 08:50
To version < 87.3 >
edited by Xiaoling
on 2022/07/13 09:49
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -1,61 +1,98 @@
1 1  
2 2  
3 -**Table of Contents:**
3 +{{box cssClass="floatinginfobox" title="**Contents**"}}
4 +{{toc/}}
5 +{{/box}}
4 4  
5 5  {{toc/}}
6 6  
7 7  
8 8  
11 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
14 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
17 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
15 15  
16 -(((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
18 -)))
19 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
19 19  
20 -(((
21 -
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 -)))
27 -
28 -(((
29 -(((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 -)))
32 -)))
33 -
34 -(((
35 -(((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 -)))
38 -)))
39 39  
40 -(((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 -)))
44 -)))
45 45  
46 -(((
47 -(((
48 48  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 -)))
50 -)))
51 51  
52 52  
53 -
54 54  == 1.2  Features ==
55 55  
30 +* Support LoRaWAN v1.0.4 protocol
31 +* Support peer-to-peer protocol
32 +* TCXO crystal to ensure RF performance on low temperature
33 +* SMD Antenna pad and i-pex antenna connector
34 +* Available in different frequency LoRaWAN frequency bands.
35 +* World-wide unique OTAA keys.
36 +* AT Command via UART-TTL interface
37 +* Firmware upgradable via UART interface
38 +* Ultra-long RF range
56 56  
40 +== 1.3  Specification ==
41 +
42 +* CPU: 32-bit 48 MHz
43 +* Flash: 256KB
44 +* RAM: 64KB
45 +* Input Power Range: 1.8v ~~ 3.7v
46 +* Power Consumption: < 4uA.
47 +* Frequency Range: 150 MHz ~~ 960 MHz
48 +* Maximum Power +22 dBm constant RF output
49 +* High sensitivity: -148 dBm
50 +* Temperature:
51 +** Storage: -55 ~~ +125℃
52 +** Operating: -40 ~~ +85℃
53 +* Humidity:
54 +** Storage: 5 ~~ 95% (Non-Condensing)
55 +** Operating: 10 ~~ 95% (Non-Condensing)
56 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
57 +* LoRa Rx current: <9 mA
58 +* I/O Voltage: 3.3v
59 +
60 +== 1.4  AT Command ==
61 +
62 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
63 +
64 +
65 +== 1.5  Dimension ==
66 +
67 +[[image:image-20220517072526-1.png]]
68 +
69 +
70 +
71 +== 1.6  Pin Mapping ==
72 +
73 +
74 +[[image:image-20220523101537-1.png]]
75 +
76 +
77 +
78 +== 1.7  Land Pattern ==
79 +
80 +[[image:image-20220517072821-2.png]]
81 +
82 +
83 +
84 += 2.  LA66 LoRaWAN Shield =
85 +
86 +
87 +== 2.1  Overview ==
88 +
89 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
90 +
91 +
92 +== 2.2  Features ==
93 +
57 57  * Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
95 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 61  * SMA connector
... ... @@ -65,10 +65,8 @@
65 65  * Firmware upgradable via UART interface
66 66  * Ultra-long RF range
67 67  
105 +== 2.3  Specification ==
68 68  
69 -== 1.3  Specification ==
70 -
71 -
72 72  * CPU: 32-bit 48 MHz
73 73  * Flash: 256KB
74 74  * RAM: 64KB
... ... @@ -87,251 +87,308 @@
87 87  * LoRa Rx current: <9 mA
88 88  * I/O Voltage: 3.3v
89 89  
125 +== 2.4  Pin Mapping & LED ==
90 90  
91 91  
92 92  
93 -== 1.4  Pin Mapping & LED ==
129 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
94 94  
95 95  
96 -[[image:image-20220817085048-1.png]]
97 97  
98 -~1. The LED lights up red when there is an upstream data packet
99 -2. When the network is successfully connected, the green light will be on for 5 seconds
100 -3. Purple light on when receiving downlink data packets
133 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
101 101  
102 102  
103 103  
104 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
137 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
105 105  
106 106  
107 -**Show connection diagram：**
108 108  
141 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
109 109  
110 -[[image:image-20220723170210-2.png||height="908" width="681"]]
111 111  
144 +=== 2.8.1  Items needed for update ===
112 112  
146 +1. LA66 LoRaWAN Shield
147 +1. Arduino
148 +1. USB TO TTL Adapter
113 113  
114 -(% style="color:blue" %)**1.  open Arduino IDE**
150 +[[image:image-20220602100052-2.png||height="385" width="600"]]
115 115  
116 116  
117 -[[image:image-20220723170545-4.png]]
153 +=== 2.8.2  Connection ===
118 118  
119 119  
156 +[[image:image-20220602101311-3.png||height="276" width="600"]]
120 120  
121 -(% style="color:blue" %)**2.  Open project**
122 122  
159 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
123 123  
124 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
125 125  
126 -[[image:image-20220726135239-1.png]]
162 +(% style="background-color:yellow" %)**GND  <-> GND
163 +TXD  <->  TXD
164 +RXD  <->  RXD**
127 127  
128 128  
129 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
167 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
130 130  
131 -[[image:image-20220726135356-2.png]]
169 +Connect USB TTL Adapter to PC after connecting the wires
132 132  
133 133  
134 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
172 +[[image:image-20220602102240-4.png||height="304" width="600"]]
135 135  
136 136  
137 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
175 +=== 2.8.3  Upgrade steps ===
138 138  
139 139  
178 +==== 1.  Switch SW1 to put in ISP position ====
140 140  
141 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
142 142  
181 +[[image:image-20220602102824-5.png||height="306" width="600"]]
143 143  
144 -(% style="color:blue" %)**1.  Open project**
145 145  
184 +==== 2.  Press the RST switch once ====
146 146  
147 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
186 +[[image:image-20220602104701-12.png||height="285" width="600"]]
148 148  
149 149  
150 -[[image:image-20220723172502-8.png]]
189 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
151 151  
152 152  
192 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
153 153  
154 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
155 155  
195 +[[image:image-20220602103227-6.png]]
156 156  
157 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
158 158  
198 +[[image:image-20220602103357-7.png]]
159 159  
160 160  
161 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
162 162  
202 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
203 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
163 163  
164 -(% style="color:blue" %)**1.  Open project**
165 165  
206 +[[image:image-20220602103844-8.png]]
166 166  
167 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
168 168  
169 169  
170 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
210 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
211 +(% style="color:blue" %)**3. Select the bin file to burn**
171 171  
172 172  
214 +[[image:image-20220602104144-9.png]]
173 173  
174 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
175 175  
217 +[[image:image-20220602104251-10.png]]
176 176  
177 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
178 178  
220 +[[image:image-20220602104402-11.png]]
179 179  
180 180  
181 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
182 182  
183 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
224 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
225 +(% style="color:blue" %)**4. Click to start the download**
184 184  
185 -[[image:image-20220723175700-12.png||height="602" width="995"]]
227 +[[image:image-20220602104923-13.png]]
186 186  
187 187  
230 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
231 +(% style="color:blue" %)**5. Check update process**
188 188  
189 -== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
190 190  
234 +[[image:image-20220602104948-14.png]]
191 191  
192 -=== 1.8.1  Items needed for update ===
193 193  
194 194  
195 -1. LA66 LoRaWAN Shield
196 -1. Arduino
197 -1. USB TO TTL Adapter
238 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
239 +(% style="color:blue" %)**The following picture shows that the burning is successful**
198 198  
199 -[[image:image-20220602100052-2.png||height="385" width="600"]]
241 +[[image:image-20220602105251-15.png]]
200 200  
201 201  
202 202  
203 -=== 1.8.2  Connection ===
245 += 3.  LA66 USB LoRaWAN Adapter =
204 204  
205 205  
206 -[[image:image-20220602101311-3.png||height="276" width="600"]]
248 +== 3.1  Overview ==
207 207  
250 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
208 208  
209 -(((
210 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
211 -)))
212 212  
213 -(((
214 -(% style="background-color:yellow" %)**GND  <-> GND
215 -TXD  <->  TXD
216 -RXD  <->  RXD**
217 -)))
253 +== 3.2  Features ==
218 218  
255 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
256 +* Ultra-long RF range
257 +* Support LoRaWAN v1.0.4 protocol
258 +* Support peer-to-peer protocol
259 +* TCXO crystal to ensure RF performance on low temperature
260 +* Spring RF antenna
261 +* Available in different frequency LoRaWAN frequency bands.
262 +* World-wide unique OTAA keys.
263 +* AT Command via UART-TTL interface
264 +* Firmware upgradable via UART interface
219 219  
220 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
266 +== 3.3  Specification ==
221 221  
222 -Connect USB TTL Adapter to PC after connecting the wires
268 +* CPU: 32-bit 48 MHz
269 +* Flash: 256KB
270 +* RAM: 64KB
271 +* Input Power Range: 5v
272 +* Frequency Range: 150 MHz ~~ 960 MHz
273 +* Maximum Power +22 dBm constant RF output
274 +* High sensitivity: -148 dBm
275 +* Temperature:
276 +** Storage: -55 ~~ +125℃
277 +** Operating: -40 ~~ +85℃
278 +* Humidity:
279 +** Storage: 5 ~~ 95% (Non-Condensing)
280 +** Operating: 10 ~~ 95% (Non-Condensing)
281 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
282 +* LoRa Rx current: <9 mA
223 223  
284 +== 3.4  Pin Mapping & LED ==
224 224  
225 -[[image:image-20220602102240-4.png||height="304" width="600"]]
226 226  
227 227  
288 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
228 228  
229 -=== 1.8.3  Upgrade steps ===
230 230  
291 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
231 231  
232 232  
233 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
294 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
234 234  
235 235  
236 -[[image:image-20220602102824-5.png||height="306" width="600"]]
297 +[[image:image-20220602171217-1.png||height="538" width="800"]]
237 237  
238 238  
300 +Open the serial port tool
239 239  
240 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
302 +[[image:image-20220602161617-8.png]]
241 241  
304 +[[image:image-20220602161718-9.png||height="457" width="800"]]
242 242  
243 -[[image:image-20220602104701-12.png||height="285" width="600"]]
244 244  
245 245  
308 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
246 246  
247 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
310 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
248 248  
249 249  
250 -(((
251 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
252 -)))
313 +[[image:image-20220602161935-10.png||height="498" width="800"]]
253 253  
254 254  
255 -[[image:image-20220602103227-6.png]]
256 256  
317 +(% style="color:blue" %)**3. See Uplink Command**
257 257  
258 -[[image:image-20220602103357-7.png]]
319 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
259 259  
321 +example: AT+SENDB=01,02,8,05820802581ea0a5
260 260  
323 +[[image:image-20220602162157-11.png||height="497" width="800"]]
261 261  
262 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
263 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
264 264  
265 265  
266 -[[image:image-20220602103844-8.png]]
327 +(% style="color:blue" %)**4. Check to see if TTN received the message**
267 267  
329 +[[image:image-20220602162331-12.png||height="420" width="800"]]
268 268  
269 269  
270 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
271 -(% style="color:blue" %)**3. Select the bin file to burn**
272 272  
333 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
273 273  
274 -[[image:image-20220602104144-9.png]]
275 275  
336 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
276 276  
277 -[[image:image-20220602104251-10.png]]
278 278  
339 +(% style="color:red" %)**Preconditions:**
279 279  
280 -[[image:image-20220602104402-11.png]]
341 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
281 281  
343 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
282 282  
283 283  
284 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
285 -(% style="color:blue" %)**4. Click to start the download**
286 286  
287 -[[image:image-20220602104923-13.png]]
347 +(% style="color:blue" %)**Steps for usage:**
288 288  
349 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
289 289  
351 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
290 290  
291 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
292 -(% style="color:blue" %)**5. Check update process**
353 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
293 293  
294 294  
295 -[[image:image-20220602104948-14.png]]
296 296  
357 +== Example Send & Get Messages via LoRaWAN in RPi ==
297 297  
359 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
298 298  
299 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
300 -(% style="color:blue" %)**The following picture shows that the burning is successful**
361 +~1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
301 301  
302 -[[image:image-20220602105251-15.png]]
363 +[[image:image-20220602171233-2.png||height="538" width="800"]]
303 303  
304 304  
366 +2. Install Minicom in RPi.
305 305  
306 -= 2.  FAQ =
368 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
307 307  
370 +(% class="mark" %)apt update
308 308  
309 -== 2.1  How to Compile Source Code for LA66? ==
372 +(% class="mark" %)apt install minicom
310 310  
311 311  
312 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
375 +Use minicom to connect to the RPI's terminal
313 313  
377 +[[image:image-20220602153146-3.png||height="439" width="500"]]
314 314  
315 315  
316 -= 3.  Order Info =
380 +3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.
381 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
317 317  
383 +[[image:image-20220602154928-5.png||height="436" width="500"]]
318 318  
319 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
320 320  
386 +4. Send Uplink message
321 321  
322 -(% style="color:blue" %)**XXX**(%%): The default frequency band
388 +Format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
323 323  
324 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
325 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
326 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
327 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
328 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
329 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
330 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
331 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
332 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
390 +example: AT+SENDB=01,02,8,05820802581ea0a5
333 333  
334 -= 4.  Reference =
392 +[[image:image-20220602160339-6.png||height="517" width="600"]]
335 335  
394 +Check to see if TTN received the message
336 336  
337 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
396 +[[image:image-20220602160627-7.png||height="369" width="800"]]
397 +
398 +
399 +
400 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
401 +
402 +
403 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
404 +
405 +
406 +
407 += Order Info =
408 +
409 +Part Number:
410 +
411 +**LA66-XXX**, **LA66-LoRaWAN-Shield-XXX** or **LA66-USB-LoRaWAN-Adapter-XXX**
412 +
413 +**XXX**: The default frequency band
414 +
415 +* **AS923**: LoRaWAN AS923 band
416 +* **AU915**: LoRaWAN AU915 band
417 +* **EU433**: LoRaWAN EU433 band
418 +* **EU868**: LoRaWAN EU868 band
419 +* **KR920**: LoRaWAN KR920 band
420 +* **US915**: LoRaWAN US915 band
421 +* **IN865**: LoRaWAN IN865 band
422 +* **CN470**: LoRaWAN CN470 band
423 +* **PP**: Peer to Peer LoRa Protocol
424 +
425 += Reference =
426 +
427 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
428 +
429 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0