Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 147.1 >
edited by Xiaoling
on 2022/08/17 08:50
To version < 87.7 >
edited by Xiaoling
on 2022/07/13 10:00
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -1,64 +1,32 @@
1 1  
2 2  
3 -**Table of Contents:**
4 -
5 5  {{toc/}}
6 6  
7 7  
8 8  
7 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
10 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
13 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
15 15  
16 -(((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
18 -)))
15 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
19 19  
20 -(((
21 -
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 -)))
27 -
28 -(((
29 -(((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 -)))
32 -)))
33 -
34 -(((
35 -(((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 -)))
38 -)))
39 39  
40 -(((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 -)))
44 -)))
45 45  
46 -(((
47 -(((
48 48  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 -)))
50 -)))
51 51  
52 52  
53 -
54 54  == 1.2  Features ==
55 55  
56 -
57 -* Arduino Shield base on LA66 LoRaWAN module
58 -* Support LoRaWAN v1.0.3 protocol
26 +* Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 -* SMA connector
29 +* SMD Antenna pad and i-pex antenna connector
62 62  * Available in different frequency LoRaWAN frequency bands.
63 63  * World-wide unique OTAA keys.
64 64  * AT Command via UART-TTL interface
... ... @@ -69,7 +69,73 @@
69 69  
70 70  == 1.3  Specification ==
71 71  
40 +* CPU: 32-bit 48 MHz
41 +* Flash: 256KB
42 +* RAM: 64KB
43 +* Input Power Range: 1.8v ~~ 3.7v
44 +* Power Consumption: < 4uA.
45 +* Frequency Range: 150 MHz ~~ 960 MHz
46 +* Maximum Power +22 dBm constant RF output
47 +* High sensitivity: -148 dBm
48 +* Temperature:
49 +** Storage: -55 ~~ +125℃
50 +** Operating: -40 ~~ +85℃
51 +* Humidity:
52 +** Storage: 5 ~~ 95% (Non-Condensing)
53 +** Operating: 10 ~~ 95% (Non-Condensing)
54 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
55 +* LoRa Rx current: <9 mA
56 +* I/O Voltage: 3.3v
72 72  
58 +
59 +
60 +== 1.4  AT Command ==
61 +
62 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
63 +
64 +
65 +== 1.5  Dimension ==
66 +
67 +[[image:image-20220517072526-1.png]]
68 +
69 +
70 +
71 +== 1.6  Pin Mapping ==
72 +
73 +
74 +[[image:image-20220523101537-1.png]]
75 +
76 +
77 +
78 +== 1.7  Land Pattern ==
79 +
80 +[[image:image-20220517072821-2.png]]
81 +
82 +
83 +
84 += 2.  LA66 LoRaWAN Shield =
85 +
86 +
87 +== 2.1  Overview ==
88 +
89 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
90 +
91 +
92 +== 2.2  Features ==
93 +
94 +* Arduino Shield base on LA66 LoRaWAN module
95 +* Support LoRaWAN v1.0.4 protocol
96 +* Support peer-to-peer protocol
97 +* TCXO crystal to ensure RF performance on low temperature
98 +* SMA connector
99 +* Available in different frequency LoRaWAN frequency bands.
100 +* World-wide unique OTAA keys.
101 +* AT Command via UART-TTL interface
102 +* Firmware upgradable via UART interface
103 +* Ultra-long RF range
104 +
105 +== 2.3  Specification ==
106 +
73 73  * CPU: 32-bit 48 MHz
74 74  * Flash: 256KB
75 75  * RAM: 64KB
... ... @@ -88,237 +88,304 @@
88 88  * LoRa Rx current: <9 mA
89 89  * I/O Voltage: 3.3v
90 90  
125 +== 2.4  Pin Mapping & LED ==
91 91  
92 92  
93 -== 1.4  Pin Mapping & LED ==
94 94  
129 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
95 95  
96 -[[image:image-20220814101457-1.png||height="553" width="761"]]
97 97  
98 -~1. The LED lights up red when there is an upstream data packet
99 -2. When the network is successfully connected, the green light will be on for 5 seconds
100 -3. Purple light on when receiving downlink data packets
101 101  
133 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
102 102  
103 103  
104 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
105 105  
137 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
106 106  
107 -**Show connection diagram：**
108 108  
109 109  
110 -[[image:image-20220723170210-2.png||height="908" width="681"]]
141 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
111 111  
112 112  
144 +=== 2.8.1  Items needed for update ===
113 113  
114 -(% style="color:blue" %)**1.  open Arduino IDE**
146 +1. LA66 LoRaWAN Shield
147 +1. Arduino
148 +1. USB TO TTL Adapter
115 115  
150 +[[image:image-20220602100052-2.png||height="385" width="600"]]
116 116  
117 -[[image:image-20220723170545-4.png]]
118 118  
153 +=== 2.8.2  Connection ===
119 119  
120 120  
121 -(% style="color:blue" %)**2.  Open project**
156 +[[image:image-20220602101311-3.png||height="276" width="600"]]
122 122  
123 123  
124 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
159 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
125 125  
126 -[[image:image-20220726135239-1.png]]
127 127  
162 +(% style="background-color:yellow" %)**GND  <-> GND
163 +TXD  <->  TXD
164 +RXD  <->  RXD**
128 128  
129 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
130 130  
131 -[[image:image-20220726135356-2.png]]
167 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
132 132  
169 +Connect USB TTL Adapter to PC after connecting the wires
133 133  
134 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
135 135  
172 +[[image:image-20220602102240-4.png||height="304" width="600"]]
136 136  
137 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
138 138  
175 +=== 2.8.3  Upgrade steps ===
139 139  
140 140  
141 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
178 +==== 1.  Switch SW1 to put in ISP position ====
142 142  
143 143  
144 -(% style="color:blue" %)**1.  Open project**
181 +[[image:image-20220602102824-5.png||height="306" width="600"]]
145 145  
146 146  
147 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
184 +==== 2.  Press the RST switch once ====
148 148  
186 +[[image:image-20220602104701-12.png||height="285" width="600"]]
149 149  
150 -[[image:image-20220723172502-8.png]]
151 151  
189 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
152 152  
153 153  
154 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
192 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
155 155  
156 156  
157 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
195 +[[image:image-20220602103227-6.png]]
158 158  
159 159  
198 +[[image:image-20220602103357-7.png]]
160 160  
161 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
162 162  
163 163  
164 -(% style="color:blue" %)**1.  Open project**
202 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
203 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
165 165  
166 166  
167 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
206 +[[image:image-20220602103844-8.png]]
168 168  
169 169  
170 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
171 171  
210 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
211 +(% style="color:blue" %)**3. Select the bin file to burn**
172 172  
173 173  
174 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
214 +[[image:image-20220602104144-9.png]]
175 175  
176 176  
177 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
217 +[[image:image-20220602104251-10.png]]
178 178  
179 179  
220 +[[image:image-20220602104402-11.png]]
180 180  
181 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
182 182  
183 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
184 184  
185 -[[image:image-20220723175700-12.png||height="602" width="995"]]
224 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
225 +(% style="color:blue" %)**4. Click to start the download**
186 186  
227 +[[image:image-20220602104923-13.png]]
187 187  
188 188  
189 -== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
230 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
231 +(% style="color:blue" %)**5. Check update process**
190 190  
191 191  
192 -=== 1.8.1  Items needed for update ===
234 +[[image:image-20220602104948-14.png]]
193 193  
194 194  
195 -1. LA66 LoRaWAN Shield
196 -1. Arduino
197 -1. USB TO TTL Adapter
198 198  
199 -[[image:image-20220602100052-2.png||height="385" width="600"]]
238 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
239 +(% style="color:blue" %)**The following picture shows that the burning is successful**
200 200  
241 +[[image:image-20220602105251-15.png]]
201 201  
202 202  
203 -=== 1.8.2  Connection ===
204 204  
245 += 3.  LA66 USB LoRaWAN Adapter =
205 205  
206 -[[image:image-20220602101311-3.png||height="276" width="600"]]
207 207  
248 +== 3.1  Overview ==
208 208  
209 -(((
210 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
211 -)))
250 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
212 212  
213 -(((
214 -(% style="background-color:yellow" %)**GND  <-> GND
215 -TXD  <->  TXD
216 -RXD  <->  RXD**
217 -)))
218 218  
253 +== 3.2  Features ==
219 219  
220 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
255 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
256 +* Ultra-long RF range
257 +* Support LoRaWAN v1.0.4 protocol
258 +* Support peer-to-peer protocol
259 +* TCXO crystal to ensure RF performance on low temperature
260 +* Spring RF antenna
261 +* Available in different frequency LoRaWAN frequency bands.
262 +* World-wide unique OTAA keys.
263 +* AT Command via UART-TTL interface
264 +* Firmware upgradable via UART interface
221 221  
222 -Connect USB TTL Adapter to PC after connecting the wires
266 +== 3.3  Specification ==
223 223  
268 +* CPU: 32-bit 48 MHz
269 +* Flash: 256KB
270 +* RAM: 64KB
271 +* Input Power Range: 5v
272 +* Frequency Range: 150 MHz ~~ 960 MHz
273 +* Maximum Power +22 dBm constant RF output
274 +* High sensitivity: -148 dBm
275 +* Temperature:
276 +** Storage: -55 ~~ +125℃
277 +** Operating: -40 ~~ +85℃
278 +* Humidity:
279 +** Storage: 5 ~~ 95% (Non-Condensing)
280 +** Operating: 10 ~~ 95% (Non-Condensing)
281 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
282 +* LoRa Rx current: <9 mA
224 224  
225 -[[image:image-20220602102240-4.png||height="304" width="600"]]
284 +== 3.4  Pin Mapping & LED ==
226 226  
227 227  
228 228  
229 -=== 1.8.3  Upgrade steps ===
288 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
230 230  
231 231  
291 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
232 232  
233 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
234 234  
294 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
235 235  
236 -[[image:image-20220602102824-5.png||height="306" width="600"]]
237 237  
297 +[[image:image-20220602171217-1.png||height="538" width="800"]]
238 238  
239 239  
240 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
300 +Open the serial port tool
241 241  
302 +[[image:image-20220602161617-8.png]]
242 242  
243 -[[image:image-20220602104701-12.png||height="285" width="600"]]
304 +[[image:image-20220602161718-9.png||height="457" width="800"]]
244 244  
245 245  
246 246  
247 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
308 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
248 248  
310 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
249 249  
250 -(((
251 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
252 -)))
253 253  
313 +[[image:image-20220602161935-10.png||height="498" width="800"]]
254 254  
255 -[[image:image-20220602103227-6.png]]
256 256  
257 257  
258 -[[image:image-20220602103357-7.png]]
317 +(% style="color:blue" %)**3. See Uplink Command**
259 259  
319 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
260 260  
321 +example: AT+SENDB=01,02,8,05820802581ea0a5
261 261  
262 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
263 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
323 +[[image:image-20220602162157-11.png||height="497" width="800"]]
264 264  
265 265  
266 -[[image:image-20220602103844-8.png]]
267 267  
327 +(% style="color:blue" %)**4. Check to see if TTN received the message**
268 268  
329 +[[image:image-20220602162331-12.png||height="420" width="800"]]
269 269  
270 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
271 -(% style="color:blue" %)**3. Select the bin file to burn**
272 272  
273 273  
274 -[[image:image-20220602104144-9.png]]
333 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
275 275  
276 276  
277 -[[image:image-20220602104251-10.png]]
336 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
278 278  
279 279  
280 -[[image:image-20220602104402-11.png]]
339 +(% style="color:red" %)**Preconditions:**
281 281  
341 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
282 282  
343 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
283 283  
284 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
285 -(% style="color:blue" %)**4. Click to start the download**
286 286  
287 -[[image:image-20220602104923-13.png]]
288 288  
347 +(% style="color:blue" %)**Steps for usage:**
289 289  
349 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
290 290  
291 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
292 -(% style="color:blue" %)**5. Check update process**
351 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
293 293  
353 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
294 294  
295 -[[image:image-20220602104948-14.png]]
296 296  
297 297  
357 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
298 298  
299 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
300 -(% style="color:blue" %)**The following picture shows that the burning is successful**
301 301  
302 -[[image:image-20220602105251-15.png]]
360 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
303 303  
304 304  
363 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
305 305  
306 -= 2.  FAQ =
365 +[[image:image-20220602171233-2.png||height="538" width="800"]]
307 307  
308 308  
309 -== 2.1  How to Compile Source Code for LA66? ==
310 310  
369 +(% style="color:blue" %)**2. Install Minicom in RPi.**
311 311  
312 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
371 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
313 313  
373 + (% style="background-color:yellow" %)**apt update**
314 314  
375 + (% style="background-color:yellow" %)**apt install minicom**
315 315  
316 -= 3.  Order Info =
317 317  
378 +Use minicom to connect to the RPI's terminal
318 318  
319 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
380 +[[image:image-20220602153146-3.png||height="439" width="500"]]
320 320  
321 321  
383 +
384 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**(%%)
385 +(% style="color:blue" %)The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
386 +
387 +[[image:image-20220602154928-5.png||height="436" width="500"]]
388 +
389 +
390 +
391 +(% style="color:blue" %)**4. Send Uplink message**
392 +
393 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
394 +
395 +example: AT+SENDB=01,02,8,05820802581ea0a5
396 +
397 +
398 +[[image:image-20220602160339-6.png||height="517" width="600"]]
399 +
400 +
401 +
402 +Check to see if TTN received the message
403 +
404 +[[image:image-20220602160627-7.png||height="369" width="800"]]
405 +
406 +
407 +
408 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
409 +
410 +
411 +
412 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
413 +
414 +
415 +
416 +
417 += 4.  Order Info =
418 +
419 +
420 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
421 +
422 +
322 322  (% style="color:blue" %)**XXX**(%%): The default frequency band
323 323  
324 324  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -332,7 +332,10 @@
332 332  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
333 333  
334 334  
335 -= 4.  Reference =
336 336  
337 337  
338 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
438 += 5.  Reference =
439 +
440 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
441 +
442 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0