Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 146.7 >
edited by Xiaoling
on 2022/08/16 14:19
To version < 87.7 >
edited by Xiaoling
on 2022/07/13 10:00
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -1,64 +1,32 @@
1 1  
2 2  
3 -**Table of Contents:**
4 -
5 5  {{toc/}}
6 6  
7 7  
8 8  
7 += 1.  LA66 LoRaWAN Module =
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 11  
10 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
13 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
15 15  
16 -(((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
18 -)))
15 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
19 19  
20 -(((
21 -
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 -)))
27 -
28 -(((
29 -(((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 -)))
32 -)))
33 -
34 -(((
35 -(((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 -)))
38 -)))
39 39  
40 -(((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 -)))
44 -)))
45 45  
46 -(((
47 -(((
48 48  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 -)))
50 -)))
51 51  
52 52  
53 -
54 54  == 1.2  Features ==
55 55  
56 -
57 -* Arduino Shield base on LA66 LoRaWAN module
58 58  * Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 -* SMA connector
29 +* SMD Antenna pad and i-pex antenna connector
62 62  * Available in different frequency LoRaWAN frequency bands.
63 63  * World-wide unique OTAA keys.
64 64  * AT Command via UART-TTL interface
... ... @@ -67,10 +67,75 @@
67 67  
68 68  
69 69  
70 -
71 71  == 1.3  Specification ==
72 72  
40 +* CPU: 32-bit 48 MHz
41 +* Flash: 256KB
42 +* RAM: 64KB
43 +* Input Power Range: 1.8v ~~ 3.7v
44 +* Power Consumption: < 4uA.
45 +* Frequency Range: 150 MHz ~~ 960 MHz
46 +* Maximum Power +22 dBm constant RF output
47 +* High sensitivity: -148 dBm
48 +* Temperature:
49 +** Storage: -55 ~~ +125℃
50 +** Operating: -40 ~~ +85℃
51 +* Humidity:
52 +** Storage: 5 ~~ 95% (Non-Condensing)
53 +** Operating: 10 ~~ 95% (Non-Condensing)
54 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
55 +* LoRa Rx current: <9 mA
56 +* I/O Voltage: 3.3v
73 73  
58 +
59 +
60 +== 1.4  AT Command ==
61 +
62 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
63 +
64 +
65 +== 1.5  Dimension ==
66 +
67 +[[image:image-20220517072526-1.png]]
68 +
69 +
70 +
71 +== 1.6  Pin Mapping ==
72 +
73 +
74 +[[image:image-20220523101537-1.png]]
75 +
76 +
77 +
78 +== 1.7  Land Pattern ==
79 +
80 +[[image:image-20220517072821-2.png]]
81 +
82 +
83 +
84 += 2.  LA66 LoRaWAN Shield =
85 +
86 +
87 +== 2.1  Overview ==
88 +
89 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
90 +
91 +
92 +== 2.2  Features ==
93 +
94 +* Arduino Shield base on LA66 LoRaWAN module
95 +* Support LoRaWAN v1.0.4 protocol
96 +* Support peer-to-peer protocol
97 +* TCXO crystal to ensure RF performance on low temperature
98 +* SMA connector
99 +* Available in different frequency LoRaWAN frequency bands.
100 +* World-wide unique OTAA keys.
101 +* AT Command via UART-TTL interface
102 +* Firmware upgradable via UART interface
103 +* Ultra-long RF range
104 +
105 +== 2.3  Specification ==
106 +
74 74  * CPU: 32-bit 48 MHz
75 75  * Flash: 256KB
76 76  * RAM: 64KB
... ... @@ -89,237 +89,304 @@
89 89  * LoRa Rx current: <9 mA
90 90  * I/O Voltage: 3.3v
91 91  
125 +== 2.4  Pin Mapping & LED ==
92 92  
93 93  
94 94  
95 -== 1.4  Pin Mapping & LED ==
129 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
96 96  
97 97  
98 -[[image:image-20220814101457-1.png||height="553" width="761"]]
99 99  
100 -~1. The LED lights up red when there is an upstream data packet
101 -2. When the network is successfully connected, the green light will be on for 5 seconds
102 -3. Purple light on when receiving downlink data packets
133 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
103 103  
104 104  
105 105  
106 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
137 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
107 107  
108 108  
109 -**Show connection diagram：**
110 110  
141 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
111 111  
112 -[[image:image-20220723170210-2.png||height="908" width="681"]]
113 113  
144 +=== 2.8.1  Items needed for update ===
114 114  
146 +1. LA66 LoRaWAN Shield
147 +1. Arduino
148 +1. USB TO TTL Adapter
115 115  
116 -(% style="color:blue" %)**1.  open Arduino IDE**
150 +[[image:image-20220602100052-2.png||height="385" width="600"]]
117 117  
118 118  
119 -[[image:image-20220723170545-4.png]]
153 +=== 2.8.2  Connection ===
120 120  
121 121  
156 +[[image:image-20220602101311-3.png||height="276" width="600"]]
122 122  
123 -(% style="color:blue" %)**2.  Open project**
124 124  
159 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
125 125  
126 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
127 127  
128 -[[image:image-20220726135239-1.png]]
162 +(% style="background-color:yellow" %)**GND  <-> GND
163 +TXD  <->  TXD
164 +RXD  <->  RXD**
129 129  
130 130  
131 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
167 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
132 132  
133 -[[image:image-20220726135356-2.png]]
169 +Connect USB TTL Adapter to PC after connecting the wires
134 134  
135 135  
136 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
172 +[[image:image-20220602102240-4.png||height="304" width="600"]]
137 137  
138 138  
139 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
175 +=== 2.8.3  Upgrade steps ===
140 140  
141 141  
178 +==== 1.  Switch SW1 to put in ISP position ====
142 142  
143 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
144 144  
181 +[[image:image-20220602102824-5.png||height="306" width="600"]]
145 145  
146 -(% style="color:blue" %)**1.  Open project**
147 147  
184 +==== 2.  Press the RST switch once ====
148 148  
149 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
186 +[[image:image-20220602104701-12.png||height="285" width="600"]]
150 150  
151 151  
152 -[[image:image-20220723172502-8.png]]
189 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
153 153  
154 154  
192 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
155 155  
156 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
157 157  
195 +[[image:image-20220602103227-6.png]]
158 158  
159 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
160 160  
198 +[[image:image-20220602103357-7.png]]
161 161  
162 162  
163 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
164 164  
202 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
203 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
165 165  
166 -(% style="color:blue" %)**1.  Open project**
167 167  
206 +[[image:image-20220602103844-8.png]]
168 168  
169 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
170 170  
171 171  
172 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
210 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
211 +(% style="color:blue" %)**3. Select the bin file to burn**
173 173  
174 174  
214 +[[image:image-20220602104144-9.png]]
175 175  
176 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
177 177  
217 +[[image:image-20220602104251-10.png]]
178 178  
179 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
180 180  
220 +[[image:image-20220602104402-11.png]]
181 181  
182 182  
183 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
184 184  
185 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
224 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
225 +(% style="color:blue" %)**4. Click to start the download**
186 186  
187 -[[image:image-20220723175700-12.png||height="602" width="995"]]
227 +[[image:image-20220602104923-13.png]]
188 188  
189 189  
230 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
231 +(% style="color:blue" %)**5. Check update process**
190 190  
191 -== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
192 192  
234 +[[image:image-20220602104948-14.png]]
193 193  
194 -=== 1.8.1  Items needed for update ===
195 195  
196 196  
197 -1. LA66 LoRaWAN Shield
198 -1. Arduino
199 -1. USB TO TTL Adapter
238 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
239 +(% style="color:blue" %)**The following picture shows that the burning is successful**
200 200  
201 -[[image:image-20220602100052-2.png||height="385" width="600"]]
241 +[[image:image-20220602105251-15.png]]
202 202  
203 203  
204 204  
205 -=== 1.8.2  Connection ===
245 += 3.  LA66 USB LoRaWAN Adapter =
206 206  
207 207  
208 -[[image:image-20220602101311-3.png||height="276" width="600"]]
248 +== 3.1  Overview ==
209 209  
250 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
210 210  
211 -(((
212 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
213 -)))
214 214  
215 -(((
216 -(% style="background-color:yellow" %)**GND  <-> GND
217 -TXD  <->  TXD
218 -RXD  <->  RXD**
219 -)))
253 +== 3.2  Features ==
220 220  
255 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
256 +* Ultra-long RF range
257 +* Support LoRaWAN v1.0.4 protocol
258 +* Support peer-to-peer protocol
259 +* TCXO crystal to ensure RF performance on low temperature
260 +* Spring RF antenna
261 +* Available in different frequency LoRaWAN frequency bands.
262 +* World-wide unique OTAA keys.
263 +* AT Command via UART-TTL interface
264 +* Firmware upgradable via UART interface
221 221  
222 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
266 +== 3.3  Specification ==
223 223  
224 -Connect USB TTL Adapter to PC after connecting the wires
268 +* CPU: 32-bit 48 MHz
269 +* Flash: 256KB
270 +* RAM: 64KB
271 +* Input Power Range: 5v
272 +* Frequency Range: 150 MHz ~~ 960 MHz
273 +* Maximum Power +22 dBm constant RF output
274 +* High sensitivity: -148 dBm
275 +* Temperature:
276 +** Storage: -55 ~~ +125℃
277 +** Operating: -40 ~~ +85℃
278 +* Humidity:
279 +** Storage: 5 ~~ 95% (Non-Condensing)
280 +** Operating: 10 ~~ 95% (Non-Condensing)
281 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
282 +* LoRa Rx current: <9 mA
225 225  
284 +== 3.4  Pin Mapping & LED ==
226 226  
227 -[[image:image-20220602102240-4.png||height="304" width="600"]]
228 228  
229 229  
288 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
230 230  
231 -=== 2.8.3  Upgrade steps ===
232 232  
291 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
233 233  
234 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
235 235  
294 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
236 236  
237 -[[image:image-20220602102824-5.png||height="306" width="600"]]
238 238  
297 +[[image:image-20220602171217-1.png||height="538" width="800"]]
239 239  
240 240  
241 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
300 +Open the serial port tool
242 242  
302 +[[image:image-20220602161617-8.png]]
243 243  
244 -[[image:image-20220602104701-12.png||height="285" width="600"]]
304 +[[image:image-20220602161718-9.png||height="457" width="800"]]
245 245  
246 246  
247 247  
248 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
308 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
249 249  
310 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
250 250  
251 -(((
252 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
253 -)))
254 254  
313 +[[image:image-20220602161935-10.png||height="498" width="800"]]
255 255  
256 -[[image:image-20220602103227-6.png]]
257 257  
258 258  
259 -[[image:image-20220602103357-7.png]]
317 +(% style="color:blue" %)**3. See Uplink Command**
260 260  
319 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
261 261  
321 +example: AT+SENDB=01,02,8,05820802581ea0a5
262 262  
263 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
264 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
323 +[[image:image-20220602162157-11.png||height="497" width="800"]]
265 265  
266 266  
267 -[[image:image-20220602103844-8.png]]
268 268  
327 +(% style="color:blue" %)**4. Check to see if TTN received the message**
269 269  
329 +[[image:image-20220602162331-12.png||height="420" width="800"]]
270 270  
271 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
272 -(% style="color:blue" %)**3. Select the bin file to burn**
273 273  
274 274  
275 -[[image:image-20220602104144-9.png]]
333 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
276 276  
277 277  
278 -[[image:image-20220602104251-10.png]]
336 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
279 279  
280 280  
281 -[[image:image-20220602104402-11.png]]
339 +(% style="color:red" %)**Preconditions:**
282 282  
341 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
283 283  
343 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
284 284  
285 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
286 -(% style="color:blue" %)**4. Click to start the download**
287 287  
288 -[[image:image-20220602104923-13.png]]
289 289  
347 +(% style="color:blue" %)**Steps for usage:**
290 290  
349 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
291 291  
292 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
293 -(% style="color:blue" %)**5. Check update process**
351 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
294 294  
353 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
295 295  
296 -[[image:image-20220602104948-14.png]]
297 297  
298 298  
357 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
299 299  
300 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
301 -(% style="color:blue" %)**The following picture shows that the burning is successful**
302 302  
303 -[[image:image-20220602105251-15.png]]
360 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
304 304  
305 305  
363 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
306 306  
307 -= 2.  FAQ =
365 +[[image:image-20220602171233-2.png||height="538" width="800"]]
308 308  
309 309  
310 -== 2.1  How to Compile Source Code for LA66? ==
311 311  
369 +(% style="color:blue" %)**2. Install Minicom in RPi.**
312 312  
313 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
371 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
314 314  
373 + (% style="background-color:yellow" %)**apt update**
315 315  
375 + (% style="background-color:yellow" %)**apt install minicom**
316 316  
317 -= 3.  Order Info =
318 318  
378 +Use minicom to connect to the RPI's terminal
319 319  
320 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
380 +[[image:image-20220602153146-3.png||height="439" width="500"]]
321 321  
322 322  
383 +
384 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**(%%)
385 +(% style="color:blue" %)The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
386 +
387 +[[image:image-20220602154928-5.png||height="436" width="500"]]
388 +
389 +
390 +
391 +(% style="color:blue" %)**4. Send Uplink message**
392 +
393 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
394 +
395 +example: AT+SENDB=01,02,8,05820802581ea0a5
396 +
397 +
398 +[[image:image-20220602160339-6.png||height="517" width="600"]]
399 +
400 +
401 +
402 +Check to see if TTN received the message
403 +
404 +[[image:image-20220602160627-7.png||height="369" width="800"]]
405 +
406 +
407 +
408 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
409 +
410 +
411 +
412 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
413 +
414 +
415 +
416 +
417 += 4.  Order Info =
418 +
419 +
420 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
421 +
422 +
323 323  (% style="color:blue" %)**XXX**(%%): The default frequency band
324 324  
325 325  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -335,7 +335,8 @@
335 335  
336 336  
337 337  
338 -= 4.  Reference =
438 += 5.  Reference =
339 339  
440 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
340 340  
341 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
442 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0