Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 146.7 >
edited by Xiaoling
on 2022/08/16 14:19
To version < 85.1 >
edited by Edwin Chen
on 2022/07/10 22:06
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Shield User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,64 +1,28 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
9 9  
10 -= 1.  LA66 LoRaWAN Shield =
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
11 11  
12 -
13 -== 1.1  Overview ==
14 -
15 -
16 -(((
17 -[[image:image-20220715000826-2.png||height="145" width="220"]]
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 -)))
27 -
28 -(((
29 -(((
30 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
31 -)))
32 -)))
33 -
34 -(((
35 -(((
36 36  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
37 -)))
38 -)))
39 39  
40 -(((
41 -(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 -)))
44 -)))
45 45  
46 -(((
47 -(((
48 48  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
49 -)))
50 -)))
51 51  
52 52  
20 +== Features ==
53 53  
54 -== 1.2  Features ==
55 -
56 -
57 -* Arduino Shield base on LA66 LoRaWAN module
58 58  * Support LoRaWAN v1.0.4 protocol
59 59  * Support peer-to-peer protocol
60 60  * TCXO crystal to ensure RF performance on low temperature
61 -* SMA connector
25 +* SMD Antenna pad and i-pex antenna connector
62 62  * Available in different frequency LoRaWAN frequency bands.
63 63  * World-wide unique OTAA keys.
64 64  * AT Command via UART-TTL interface
... ... @@ -65,12 +65,8 @@
65 65  * Firmware upgradable via UART interface
66 66  * Ultra-long RF range
67 67  
32 +== Specification ==
68 68  
69 -
70 -
71 -== 1.3  Specification ==
72 -
73 -
74 74  * CPU: 32-bit 48 MHz
75 75  * Flash: 256KB
76 76  * RAM: 64KB
... ... @@ -89,253 +89,365 @@
89 89  * LoRa Rx current: <9 mA
90 90  * I/O Voltage: 3.3v
91 91  
52 +== AT Command ==
92 92  
54 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
93 93  
94 94  
95 -== 1.4  Pin Mapping & LED ==
57 +== Dimension ==
96 96  
59 +[[image:image-20220517072526-1.png]]
97 97  
98 -[[image:image-20220814101457-1.png||height="553" width="761"]]
99 99  
100 -~1. The LED lights up red when there is an upstream data packet
101 -2. When the network is successfully connected, the green light will be on for 5 seconds
102 -3. Purple light on when receiving downlink data packets
62 +== Pin Mapping ==
103 103  
64 +[[image:image-20220523101537-1.png]]
104 104  
66 +== Land Pattern ==
105 105  
106 -== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
68 +[[image:image-20220517072821-2.png]]
107 107  
108 108  
109 -**Show connection diagram：**
71 +== Order Info ==
110 110  
73 +Part Number: **LA66-XXX**
111 111  
112 -[[image:image-20220723170210-2.png||height="908" width="681"]]
75 +**XX**: The default frequency band
113 113  
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
114 114  
87 += LA66 LoRaWAN Shield =
115 115  
116 -(% style="color:blue" %)**1.  open Arduino IDE**
89 +== Overview ==
117 117  
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
118 118  
119 -[[image:image-20220723170545-4.png]]
120 120  
94 +== Features ==
121 121  
96 +* Arduino Shield base on LA66 LoRaWAN module
97 +* Support LoRaWAN v1.0.4 protocol
98 +* Support peer-to-peer protocol
99 +* TCXO crystal to ensure RF performance on low temperature
100 +* SMA connector
101 +* Available in different frequency LoRaWAN frequency bands.
102 +* World-wide unique OTAA keys.
103 +* AT Command via UART-TTL interface
104 +* Firmware upgradable via UART interface
105 +* Ultra-long RF range
122 122  
123 -(% style="color:blue" %)**2.  Open project**
107 +== Specification ==
124 124  
109 +* CPU: 32-bit 48 MHz
110 +* Flash: 256KB
111 +* RAM: 64KB
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
114 +* Frequency Range: 150 MHz ~~ 960 MHz
115 +* Maximum Power +22 dBm constant RF output
116 +* High sensitivity: -148 dBm
117 +* Temperature:
118 +** Storage: -55 ~~ +125℃
119 +** Operating: -40 ~~ +85℃
120 +* Humidity:
121 +** Storage: 5 ~~ 95% (Non-Condensing)
122 +** Operating: 10 ~~ 95% (Non-Condensing)
123 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 +* LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
125 125  
126 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
127 +== Pin Mapping & LED ==
127 127  
128 -[[image:image-20220726135239-1.png]]
129 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
129 129  
131 +== Example: Join TTN network and send an uplink message, get downlink message. ==
130 130  
131 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
133 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
132 132  
133 -[[image:image-20220726135356-2.png]]
135 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
134 134  
137 +=== Items needed for update ===
135 135  
136 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
139 +1. LA66 LoRaWAN Shield
140 +1. Arduino
141 +1. USB TO TTL Adapter
137 137  
143 +[[image:image-20220602100052-2.png||height="385" width="600"]]
138 138  
139 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
140 140  
146 +=== Connection ===
141 141  
148 +[[image:image-20220602101311-3.png||height="276" width="600"]]
142 142  
143 -== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
150 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 +**GND  <-> GND
152 +TXD  <-> TXD
153 +RXD  <-> RXD**
144 144  
155 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
145 145  
146 -(% style="color:blue" %)**1.  Open project**
157 +Connect USB TTL Adapter to PC after connecting the wires
147 147  
148 148  
149 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
160 +[[image:image-20220602102240-4.png||height="304" width="600"]]
150 150  
151 151  
152 -[[image:image-20220723172502-8.png]]
163 +=== Upgrade steps ===
153 153  
165 +==== Switch SW1 to put in ISP position ====
154 154  
167 +[[image:image-20220602102824-5.png||height="306" width="600"]]
155 155  
156 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
157 157  
170 +==== Press the RST switch once ====
158 158  
159 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
172 +[[image:image-20220602104701-12.png||height="285" width="600"]]
160 160  
161 161  
175 +==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
162 162  
163 -== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
177 +**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
164 164  
179 +[[image:image-20220602103227-6.png]]
165 165  
166 -(% style="color:blue" %)**1.  Open project**
181 +[[image:image-20220602103357-7.png]]
167 167  
168 168  
169 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
184 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
185 +**2. Select the COM port corresponding to USB TTL**
170 170  
187 +[[image:image-20220602103844-8.png]]
171 171  
172 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
173 173  
190 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
191 +**3. Select the bin file to burn**
174 174  
193 +[[image:image-20220602104144-9.png]]
175 175  
176 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
195 +[[image:image-20220602104251-10.png]]
177 177  
197 +[[image:image-20220602104402-11.png]]
178 178  
179 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
180 180  
200 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
201 +**4. Click to start the download**
181 181  
203 +[[image:image-20220602104923-13.png]]
182 182  
183 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
184 184  
185 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
206 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
207 +**5. Check update process**
186 186  
187 -[[image:image-20220723175700-12.png||height="602" width="995"]]
209 +[[image:image-20220602104948-14.png]]
188 188  
189 189  
212 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
213 +**The following picture shows that the burning is successful**
190 190  
191 -== 1.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
215 +[[image:image-20220602105251-15.png]]
192 192  
193 193  
194 -=== 1.8.1  Items needed for update ===
218 +== Order Info ==
195 195  
220 +Part Number: **LA66-LoRaWAN-Shield-XXX**
196 196  
197 -1. LA66 LoRaWAN Shield
198 -1. Arduino
199 -1. USB TO TTL Adapter
222 +**XX**: The default frequency band
200 200  
201 -[[image:image-20220602100052-2.png||height="385" width="600"]]
224 +* **AS923**: LoRaWAN AS923 band
225 +* **AU915**: LoRaWAN AU915 band
226 +* **EU433**: LoRaWAN EU433 band
227 +* **EU868**: LoRaWAN EU868 band
228 +* **KR920**: LoRaWAN KR920 band
229 +* **US915**: LoRaWAN US915 band
230 +* **IN865**: LoRaWAN IN865 band
231 +* **CN470**: LoRaWAN CN470 band
232 +* **PP**: Peer to Peer LoRa Protocol
202 202  
234 +== Package Info ==
203 203  
236 +* LA66 LoRaWAN Shield x 1
237 +* RF Antenna x 1
204 204  
205 -=== 1.8.2  Connection ===
239 += LA66 USB LoRaWAN Adapter =
206 206  
241 +== Overview ==
207 207  
208 -[[image:image-20220602101311-3.png||height="276" width="600"]]
243 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
209 209  
210 210  
211 -(((
212 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
213 -)))
246 +== Features ==
214 214  
215 -(((
216 -(% style="background-color:yellow" %)**GND  <-> GND
217 -TXD  <->  TXD
218 -RXD  <->  RXD**
219 -)))
248 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
249 +* Ultra-long RF range
250 +* Support LoRaWAN v1.0.4 protocol
251 +* Support peer-to-peer protocol
252 +* TCXO crystal to ensure RF performance on low temperature
253 +* Spring RF antenna
254 +* Available in different frequency LoRaWAN frequency bands.
255 +* World-wide unique OTAA keys.
256 +* AT Command via UART-TTL interface
257 +* Firmware upgradable via UART interface
220 220  
259 +== Specification ==
221 221  
222 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
261 +* CPU: 32-bit 48 MHz
262 +* Flash: 256KB
263 +* RAM: 64KB
264 +* Input Power Range: 5v
265 +* Frequency Range: 150 MHz ~~ 960 MHz
266 +* Maximum Power +22 dBm constant RF output
267 +* High sensitivity: -148 dBm
268 +* Temperature:
269 +** Storage: -55 ~~ +125℃
270 +** Operating: -40 ~~ +85℃
271 +* Humidity:
272 +** Storage: 5 ~~ 95% (Non-Condensing)
273 +** Operating: 10 ~~ 95% (Non-Condensing)
274 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
275 +* LoRa Rx current: <9 mA
223 223  
224 -Connect USB TTL Adapter to PC after connecting the wires
277 +== Pin Mapping & LED ==
225 225  
279 +== Example Send & Get Messages via LoRaWAN in PC ==
226 226  
227 -[[image:image-20220602102240-4.png||height="304" width="600"]]
281 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
228 228  
283 +~1. Connect the LA66 USB LoRaWAN adapter to PC
229 229  
285 +[[image:image-20220602171217-1.png||height="538" width="800"]]
230 230  
231 -=== 2.8.3  Upgrade steps ===
287 +Open the serial port tool
232 232  
289 +[[image:image-20220602161617-8.png]]
233 233  
234 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
291 +[[image:image-20220602161718-9.png||height="457" width="800"]]
235 235  
236 236  
237 -[[image:image-20220602102824-5.png||height="306" width="600"]]
294 +2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
238 238  
296 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
239 239  
298 +[[image:image-20220602161935-10.png||height="498" width="800"]]
240 240  
241 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
242 242  
301 +3. See Uplink Command
243 243  
244 -[[image:image-20220602104701-12.png||height="285" width="600"]]
303 +Command format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
245 245  
305 +example: AT+SENDB=01,02,8,05820802581ea0a5
246 246  
307 +[[image:image-20220602162157-11.png||height="497" width="800"]]
247 247  
248 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
249 249  
310 +4. Check to see if TTN received the message
250 250  
251 -(((
252 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
253 -)))
312 +[[image:image-20220602162331-12.png||height="420" width="800"]]
254 254  
255 255  
256 -[[image:image-20220602103227-6.png]]
257 257  
316 +== Example:Send PC's CPU/RAM usage to TTN via python ==
258 258  
259 -[[image:image-20220602103357-7.png]]
318 +(% class="wikigeneratedid" id="HUsepythonasanexampleFF1A" %)
319 +**Use python as an example：**
260 260  
321 +(% class="wikigeneratedid" id="HPreconditions:" %)
322 +**Preconditions:**
261 261  
324 +1.LA66 USB LoRaWAN Adapter works fine
262 262  
263 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
264 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
326 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
265 265  
328 +(% class="wikigeneratedid" id="HStepsforusage" %)
329 +**Steps for usage**
266 266  
267 -[[image:image-20220602103844-8.png]]
331 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
268 268  
333 +2.Run the python script in PC and see the TTN
269 269  
335 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
270 270  
271 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
272 -(% style="color:blue" %)**3. Select the bin file to burn**
273 273  
274 274  
275 -[[image:image-20220602104144-9.png]]
339 +== Example Send & Get Messages via LoRaWAN in RPi ==
276 276  
341 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
277 277  
278 -[[image:image-20220602104251-10.png]]
343 +~1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
279 279  
345 +[[image:image-20220602171233-2.png||height="538" width="800"]]
280 280  
281 -[[image:image-20220602104402-11.png]]
282 282  
348 +2. Install Minicom in RPi.
283 283  
350 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
284 284  
285 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
286 -(% style="color:blue" %)**4. Click to start the download**
352 +(% class="mark" %)apt update
287 287  
288 -[[image:image-20220602104923-13.png]]
354 +(% class="mark" %)apt install minicom
289 289  
290 290  
357 +Use minicom to connect to the RPI's terminal
291 291  
292 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
293 -(% style="color:blue" %)**5. Check update process**
359 +[[image:image-20220602153146-3.png||height="439" width="500"]]
294 294  
295 295  
296 -[[image:image-20220602104948-14.png]]
362 +3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.
363 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
297 297  
365 +[[image:image-20220602154928-5.png||height="436" width="500"]]
298 298  
299 299  
300 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
301 -(% style="color:blue" %)**The following picture shows that the burning is successful**
368 +4. Send Uplink message
302 302  
303 -[[image:image-20220602105251-15.png]]
370 +Format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
304 304  
372 +example: AT+SENDB=01,02,8,05820802581ea0a5
305 305  
374 +[[image:image-20220602160339-6.png||height="517" width="600"]]
306 306  
307 -= 2.  FAQ =
376 +Check to see if TTN received the message
308 308  
378 +[[image:image-20220602160627-7.png||height="369" width="800"]]
309 309  
310 -== 2.1  How to Compile Source Code for LA66? ==
311 311  
312 312  
313 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
382 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
314 314  
315 315  
385 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
316 316  
317 -= 3.  Order Info =
318 318  
319 319  
320 -**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
389 +== Order Info ==
321 321  
391 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
322 322  
323 -(% style="color:blue" %)**XXX**(%%): The default frequency band
393 +**XX**: The default frequency band
324 324  
325 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
326 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
327 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
328 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
329 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
330 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
331 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
332 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
333 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
395 +* **AS923**: LoRaWAN AS923 band
396 +* **AU915**: LoRaWAN AU915 band
397 +* **EU433**: LoRaWAN EU433 band
398 +* **EU868**: LoRaWAN EU868 band
399 +* **KR920**: LoRaWAN KR920 band
400 +* **US915**: LoRaWAN US915 band
401 +* **IN865**: LoRaWAN IN865 band
402 +* **CN470**: LoRaWAN CN470 band
403 +* **PP**: Peer to Peer LoRa Protocol
334 334  
405 +== Package Info ==
335 335  
407 +* LA66 USB LoRaWAN Adapter x 1
336 336  
409 += Reference =
337 337  
338 -= 4.  Reference =
411 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
339 339  
340 -
341 -* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
413 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0