Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 146.2 >
edited by Xiaoling
on 2022/08/16 10:57
To version < 78.1 >
edited by Edwin Chen
on 2022/07/10 21:41
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,58 +1,24 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 -
11 -
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 -
14 -
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 25  (% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 -)))
27 -)))
28 28  
29 -(((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 -)))
33 -)))
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
34 34  
35 -(((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 -)))
39 39  
40 -(((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 -)))
43 -)))
44 44  
45 -(((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 -)))
49 -)))
50 50  
51 51  
20 +== Features ==
52 52  
53 -== 1.2  Features ==
54 -
55 -
56 56  * Support LoRaWAN v1.0.4 protocol
57 57  * Support peer-to-peer protocol
58 58  * TCXO crystal to ensure RF performance on low temperature
... ... @@ -63,9 +63,8 @@
63 63  * Firmware upgradable via UART interface
64 64  * Ultra-long RF range
65 65  
66 -== 1.3  Specification ==
32 +== Specification ==
67 67  
68 -
69 69  * CPU: 32-bit 48 MHz
70 70  * Flash: 256KB
71 71  * RAM: 64KB
... ... @@ -84,79 +84,50 @@
84 84  * LoRa Rx current: <9 mA
85 85  * I/O Voltage: 3.3v
86 86  
87 -== 1.4  AT Command ==
52 +== AT Command ==
88 88  
89 -
90 90  AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
91 91  
92 92  
57 +== Dimension ==
93 93  
94 -== 1.5  Dimension ==
59 +[[image:image-20220517072526-1.png]]
95 95  
96 -[[image:image-20220718094750-3.png]]
97 97  
62 +== Pin Mapping ==
98 98  
64 +[[image:image-20220523101537-1.png]]
99 99  
100 -== 1.6  Pin Mapping ==
66 +== Land Pattern ==
101 101  
102 -[[image:image-20220720111850-1.png]]
103 -
104 -
105 -
106 -== 1.7  Land Pattern ==
107 -
108 -
109 109  [[image:image-20220517072821-2.png]]
110 110  
111 111  
71 +== Order Info ==
112 112  
113 -= 2.  LA66 LoRaWAN Shield =
73 +Part Number: **LA66-XXX**
114 114  
75 +**XX**: The default frequency band
115 115  
116 -== 2.1  Overview ==
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
117 117  
87 += LA66 LoRaWAN Shield =
118 118  
119 -(((
120 -[[image:image-20220715000826-2.png||height="145" width="220"]]
121 -)))
89 +== Overview ==
122 122  
123 -(((
124 -
125 -)))
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
126 126  
127 -(((
128 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
129 -)))
130 130  
131 -(((
132 -(((
133 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
134 -)))
135 -)))
94 +== Features ==
136 136  
137 -(((
138 -(((
139 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
140 -)))
141 -)))
142 -
143 -(((
144 -(((
145 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
146 -)))
147 -)))
148 -
149 -(((
150 -(((
151 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
152 -)))
153 -)))
154 -
155 -
156 -
157 -== 2.2  Features ==
158 -
159 -
160 160  * Arduino Shield base on LA66 LoRaWAN module
161 161  * Support LoRaWAN v1.0.4 protocol
162 162  * Support peer-to-peer protocol
... ... @@ -168,9 +168,8 @@
168 168  * Firmware upgradable via UART interface
169 169  * Ultra-long RF range
170 170  
171 -== 2.3  Specification ==
107 +== Specification ==
172 172  
173 -
174 174  * CPU: 32-bit 48 MHz
175 175  * Flash: 256KB
176 176  * RAM: 64KB
... ... @@ -189,108 +189,18 @@
189 189  * LoRa Rx current: <9 mA
190 190  * I/O Voltage: 3.3v
191 191  
192 -== 2.4  Pin Mapping & LED ==
127 +== Pin Mapping & LED ==
193 193  
129 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
194 194  
195 -[[image:image-20220814101457-1.png||height="553" width="761"]]
131 +== Example: Join TTN network and send an uplink message, get downlink message. ==
196 196  
197 -~1. The LED lights up red when there is an upstream data packet
198 -2. When the network is successfully connected, the green light will be on for 5 seconds
199 -3. Purple light on when receiving downlink data packets
133 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
200 200  
135 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
201 201  
137 +=== Items needed for update ===
202 202  
203 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
204 -
205 -
206 -**Show connection diagram：**
207 -
208 -
209 -[[image:image-20220723170210-2.png||height="908" width="681"]]
210 -
211 -
212 -
213 -(% style="color:blue" %)**1.  open Arduino IDE**
214 -
215 -
216 -[[image:image-20220723170545-4.png]]
217 -
218 -
219 -
220 -(% style="color:blue" %)**2.  Open project**
221 -
222 -
223 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
224 -
225 -[[image:image-20220726135239-1.png]]
226 -
227 -
228 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
229 -
230 -[[image:image-20220726135356-2.png]]
231 -
232 -
233 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
234 -
235 -
236 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
237 -
238 -
239 -
240 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
241 -
242 -
243 -(% style="color:blue" %)**1.  Open project**
244 -
245 -
246 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
247 -
248 -
249 -[[image:image-20220723172502-8.png]]
250 -
251 -
252 -
253 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
254 -
255 -
256 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
257 -
258 -
259 -
260 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
261 -
262 -
263 -(% style="color:blue" %)**1.  Open project**
264 -
265 -
266 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
267 -
268 -
269 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
270 -
271 -
272 -
273 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
274 -
275 -
276 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
277 -
278 -
279 -
280 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
281 -
282 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
283 -
284 -[[image:image-20220723175700-12.png||height="602" width="995"]]
285 -
286 -
287 -
288 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
289 -
290 -
291 -=== 2.8.1  Items needed for update ===
292 -
293 -
294 294  1. LA66 LoRaWAN Shield
295 295  1. Arduino
296 296  1. USB TO TTL Adapter
... ... @@ -298,24 +298,15 @@
298 298  [[image:image-20220602100052-2.png||height="385" width="600"]]
299 299  
300 300  
146 +=== Connection ===
301 301  
302 -=== 2.8.2  Connection ===
303 -
304 -
305 305  [[image:image-20220602101311-3.png||height="276" width="600"]]
306 306  
150 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 +**GND  <-> GND
152 +TXD  <-> TXD
153 +RXD  <-> RXD**
307 307  
308 -(((
309 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
310 -)))
311 -
312 -(((
313 -(% style="background-color:yellow" %)**GND  <-> GND
314 -TXD  <->  TXD
315 -RXD  <->  RXD**
316 -)))
317 -
318 -
319 319  Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
320 320  
321 321  Connect USB TTL Adapter to PC after connecting the wires
... ... @@ -324,117 +324,91 @@
324 324  [[image:image-20220602102240-4.png||height="304" width="600"]]
325 325  
326 326  
163 +=== Upgrade steps ===
327 327  
328 -=== 2.8.3  Upgrade steps ===
165 +==== Switch SW1 to put in ISP position ====
329 329  
330 -
331 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
332 -
333 -
334 334  [[image:image-20220602102824-5.png||height="306" width="600"]]
335 335  
336 336  
170 +==== Press the RST switch once ====
337 337  
338 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
339 -
340 -
341 341  [[image:image-20220602104701-12.png||height="285" width="600"]]
342 342  
343 343  
175 +==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
344 344  
345 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
177 +**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
346 346  
347 -
348 -(((
349 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
350 -)))
351 -
352 -
353 353  [[image:image-20220602103227-6.png]]
354 354  
355 -
356 356  [[image:image-20220602103357-7.png]]
357 357  
358 358  
359 -
360 360  (% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
361 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
185 +**2. Select the COM port corresponding to USB TTL**
362 362  
363 -
364 364  [[image:image-20220602103844-8.png]]
365 365  
366 366  
367 -
368 368  (% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
369 -(% style="color:blue" %)**3. Select the bin file to burn**
191 +**3. Select the bin file to burn**
370 370  
371 -
372 372  [[image:image-20220602104144-9.png]]
373 373  
374 -
375 375  [[image:image-20220602104251-10.png]]
376 376  
377 -
378 378  [[image:image-20220602104402-11.png]]
379 379  
380 380  
381 -
382 382  (% class="wikigeneratedid" id="HClicktostartthedownload" %)
383 -(% style="color:blue" %)**4. Click to start the download**
201 +**4. Click to start the download**
384 384  
385 385  [[image:image-20220602104923-13.png]]
386 386  
387 387  
388 -
389 389  (% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
390 -(% style="color:blue" %)**5. Check update process**
207 +**5. Check update process**
391 391  
392 -
393 393  [[image:image-20220602104948-14.png]]
394 394  
395 395  
396 -
397 397  (% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
398 -(% style="color:blue" %)**The following picture shows that the burning is successful**
213 +**The following picture shows that the burning is successful**
399 399  
400 400  [[image:image-20220602105251-15.png]]
401 401  
402 402  
218 +== Order Info ==
403 403  
404 -= 3.  LA66 USB LoRaWAN Adapter =
220 +Part Number: **LA66-LoRaWAN-Shield-XXX**
405 405  
222 +**XX**: The default frequency band
406 406  
407 -== 3.1  Overview ==
224 +* **AS923**: LoRaWAN AS923 band
225 +* **AU915**: LoRaWAN AU915 band
226 +* **EU433**: LoRaWAN EU433 band
227 +* **EU868**: LoRaWAN EU868 band
228 +* **KR920**: LoRaWAN KR920 band
229 +* **US915**: LoRaWAN US915 band
230 +* **IN865**: LoRaWAN IN865 band
231 +* **CN470**: LoRaWAN CN470 band
232 +* **PP**: Peer to Peer LoRa Protocol
408 408  
234 +== Package Info ==
409 409  
410 -[[image:image-20220715001142-3.png||height="145" width="220"]]
236 +* LA66 LoRaWAN Shield x 1
237 +* RF Antenna x 1
411 411  
239 += LA66 USB LoRaWAN Adapter =
412 412  
413 -(((
414 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
415 -)))
241 +== Overview ==
416 416  
417 -(((
418 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
419 -)))
243 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
420 420  
421 -(((
422 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
423 -)))
424 424  
425 -(((
426 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
427 -)))
246 +== Features ==
428 428  
429 -(((
430 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
431 -)))
432 -
433 -
434 -
435 -== 3.2  Features ==
436 -
437 -
438 438  * LoRaWAN USB adapter base on LA66 LoRaWAN module
439 439  * Ultra-long RF range
440 440  * Support LoRaWAN v1.0.4 protocol
... ... @@ -445,11 +445,9 @@
445 445  * World-wide unique OTAA keys.
446 446  * AT Command via UART-TTL interface
447 447  * Firmware upgradable via UART interface
448 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
449 449  
450 -== 3.3  Specification ==
259 +== Specification ==
451 451  
452 -
453 453  * CPU: 32-bit 48 MHz
454 454  * Flash: 256KB
455 455  * RAM: 64KB
... ... @@ -466,282 +466,123 @@
466 466  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
467 467  * LoRa Rx current: <9 mA
468 468  
469 -== 3.4  Pin Mapping & LED ==
277 +== Pin Mapping & LED ==
470 470  
471 -[[image:image-20220813183239-3.png||height="526" width="662"]]
279 +== Example Send & Get Messages via LoRaWAN in PC ==
472 472  
281 +Connect the LA66 LoRa Shield to the PC
473 473  
474 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
283 +[[image:image-20220602171217-1.png||height="615" width="915"]]
475 475  
476 -
477 -(((
478 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
479 -)))
480 -
481 -
482 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
483 -
484 -
485 -[[image:image-20220723100027-1.png]]
486 -
487 -
488 488  Open the serial port tool
489 489  
490 490  [[image:image-20220602161617-8.png]]
491 491  
492 -[[image:image-20220602161718-9.png||height="457" width="800"]]
289 +[[image:image-20220602161718-9.png||height="529" width="927"]]
493 493  
291 +Press the reset switch RST on the LA66 LoRa Shield.
494 494  
293 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
495 495  
496 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
295 +[[image:image-20220602161935-10.png]]
497 497  
498 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
297 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
499 499  
500 -
501 -[[image:image-20220602161935-10.png||height="498" width="800"]]
502 -
503 -
504 -
505 -(% style="color:blue" %)**3. See Uplink Command**
506 -
507 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
508 -
509 509  example: AT+SENDB=01,02,8,05820802581ea0a5
510 510  
511 -[[image:image-20220602162157-11.png||height="497" width="800"]]
301 +[[image:image-20220602162157-11.png]]
512 512  
303 +Check to see if TTN received the message
513 513  
305 +[[image:image-20220602162331-12.png||height="547" width="1044"]]
514 514  
515 -(% style="color:blue" %)**4. Check to see if TTN received the message**
307 +== Example Send & Get Messages via LoRaWAN in RPi ==
516 516  
517 -[[image:image-20220602162331-12.png||height="420" width="800"]]
309 +Connect the LA66 LoRa Shield to the RPI
518 518  
311 +[[image:image-20220602171233-2.png||height="592" width="881"]]
519 519  
313 +Log in to the RPI's terminal and connect to the serial port
520 520  
521 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
315 +[[image:image-20220602153146-3.png]]
522 522  
317 +Press the reset switch RST on the LA66 LoRa Shield.
318 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
523 523  
524 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
320 +[[image:image-20220602154928-5.png]]
525 525  
526 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
322 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
527 527  
528 -(% style="color:red" %)**Preconditions:**
529 -
530 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
531 -
532 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
533 -
534 -
535 -
536 -(% style="color:blue" %)**Steps for usage:**
537 -
538 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
539 -
540 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
541 -
542 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
543 -
544 -
545 -
546 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
547 -
548 -
549 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
550 -
551 -
552 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
553 -
554 -[[image:image-20220723100439-2.png]]
555 -
556 -
557 -
558 -(% style="color:blue" %)**2. Install Minicom in RPi.**
559 -
560 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
561 -
562 - (% style="background-color:yellow" %)**apt update**
563 -
564 - (% style="background-color:yellow" %)**apt install minicom**
565 -
566 -
567 -Use minicom to connect to the RPI's terminal
568 -
569 -[[image:image-20220602153146-3.png||height="439" width="500"]]
570 -
571 -
572 -
573 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
574 -
575 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
576 -
577 -
578 -[[image:image-20220602154928-5.png||height="436" width="500"]]
579 -
580 -
581 -
582 -(% style="color:blue" %)**4. Send Uplink message**
583 -
584 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
585 -
586 586  example: AT+SENDB=01,02,8,05820802581ea0a5
587 587  
326 +[[image:image-20220602160339-6.png]]
588 588  
589 -[[image:image-20220602160339-6.png||height="517" width="600"]]
590 -
591 -
592 -
593 593  Check to see if TTN received the message
594 594  
595 -[[image:image-20220602160627-7.png||height="369" width="800"]]
330 +[[image:image-20220602160627-7.png||height="468" width="1013"]]
596 596  
332 +=== Install Minicom ===
597 597  
334 +Enter the following command in the RPI terminal
598 598  
599 -== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
336 +apt update
600 600  
338 +[[image:image-20220602143155-1.png]]
601 601  
602 -=== 3.8.1  Hardware and Software Connection ===
340 +apt install minicom
603 603  
342 +[[image:image-20220602143744-2.png]]
604 604  
605 -==== (% style="color:blue" %)**Overview：**(%%) ====
344 +=== Send PC's CPU/RAM usage to TTN via script. ===
606 606  
346 +==== Take python as an example： ====
607 607  
608 -(((
609 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
348 +===== Preconditions: =====
610 610  
611 -* Send real-time location information of mobile phone to LoRaWAN network.
612 -* Check LoRaWAN network signal strengh.
613 -* Manually send messages to LoRaWAN network.
614 -)))
350 +1.LA66 USB LoRaWAN Adapter works fine
615 615  
352 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
616 616  
354 +===== Steps for usage =====
617 617  
618 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
356 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
619 619  
620 -A USB to Type-C adapter is needed to connect to a Mobile phone.
358 +2.Run the script and see the TTN
621 621  
622 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
360 +[[image:image-20220602115852-3.png]]
623 623  
624 -[[image:image-20220813174353-2.png||height="360" width="313"]]
625 625  
626 626  
627 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
364 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
628 628  
629 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
630 630  
631 -[[image:image-20220813173738-1.png]]
367 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
632 632  
633 633  
634 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
635 635  
636 -Function and page introduction
371 +== Order Info ==
637 637  
638 -[[image:image-20220723113448-7.png||height="995" width="450"]]
373 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
639 639  
640 -**Block Explain:**
375 +**XX**: The default frequency band
641 641  
642 -1.  Display LA66 USB LoRaWAN Module connection status
377 +* **AS923**: LoRaWAN AS923 band
378 +* **AU915**: LoRaWAN AU915 band
379 +* **EU433**: LoRaWAN EU433 band
380 +* **EU868**: LoRaWAN EU868 band
381 +* **KR920**: LoRaWAN KR920 band
382 +* **US915**: LoRaWAN US915 band
383 +* **IN865**: LoRaWAN IN865 band
384 +* **CN470**: LoRaWAN CN470 band
385 +* **PP**: Peer to Peer LoRa Protocol
643 643  
644 -2.  Check and reconnect
387 +== Package Info ==
645 645  
646 -3.  Turn send timestamps on or off
389 +* LA66 USB LoRaWAN Adapter x 1
647 647  
648 -4.  Display LoRaWan connection status
649 649  
650 -5.  Check LoRaWan connection status
392 += Reference =
651 651  
652 -6.  The RSSI value of the node when the ACK is received
653 -
654 -7.  Node's Signal Strength Icon
655 -
656 -8.  Configure Location Uplink Interval
657 -
658 -9.  AT command input box
659 -
660 -10.  Send Button:  Send input box info to LA66 USB Adapter
661 -
662 -11.  Output Log from LA66 USB adapter
663 -
664 -12.  clear log button
665 -
666 -13.  exit button
667 -
668 -
669 -LA66 USB LoRaWAN Module not connected
670 -
671 -[[image:image-20220723110520-5.png||height="677" width="508"]]
672 -
673 -
674 -
675 -Connect LA66 USB LoRaWAN Module
676 -
677 -[[image:image-20220723110626-6.png||height="681" width="511"]]
678 -
679 -
680 -
681 -=== 3.8.2 Send data to TTNv3 and plot location info in Node-Red ===
682 -
683 -
684 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
685 -
686 -[[image:image-20220723134549-8.png]]
687 -
688 -
689 -
690 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
691 -
692 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
693 -
694 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
695 -
696 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
697 -
698 -
699 -Example output in NodeRed is as below:
700 -
701 -[[image:image-20220723144339-1.png]]
702 -
703 -
704 -
705 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
706 -
707 -
708 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
709 -
710 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
711 -
712 -[[image:image-20220723150132-2.png]]
713 -
714 -
715 -
716 -= 4.  FAQ =
717 -
718 -
719 -== 4.1  How to Compile Source Code for LA66? ==
720 -
721 -
722 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Compile and Upload Code to ASR6601 Platform]]
723 -
724 -
725 -
726 -= 5.  Order Info =
727 -
728 -
729 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
730 -
731 -
732 -(% style="color:blue" %)**XXX**(%%): The default frequency band
733 -
734 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
735 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
736 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
737 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
738 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
739 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
740 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
741 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
742 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
743 -
744 -= 6.  Reference =
745 -
746 -
747 747  * Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
395 +
396 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0