Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 145.1 >
edited by Edwin Chen
on 2022/08/14 10:15
To version < 86.1 >
edited by Edwin Chen
on 2022/07/10 22:08
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,58 +1,24 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 -
11 -
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 -
14 -
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 25  (% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 -)))
27 -)))
28 28  
29 -(((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 -)))
33 -)))
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
34 34  
35 -(((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 -)))
39 39  
40 -(((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 -)))
43 -)))
44 44  
45 -(((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 -)))
49 -)))
50 50  
51 51  
20 +== Features ==
52 52  
53 -== 1.2  Features ==
54 -
55 -
56 56  * Support LoRaWAN v1.0.4 protocol
57 57  * Support peer-to-peer protocol
58 58  * TCXO crystal to ensure RF performance on low temperature
... ... @@ -63,9 +63,8 @@
63 63  * Firmware upgradable via UART interface
64 64  * Ultra-long RF range
65 65  
66 -== 1.3  Specification ==
32 +== Specification ==
67 67  
68 -
69 69  * CPU: 32-bit 48 MHz
70 70  * Flash: 256KB
71 71  * RAM: 64KB
... ... @@ -84,79 +84,36 @@
84 84  * LoRa Rx current: <9 mA
85 85  * I/O Voltage: 3.3v
86 86  
87 -== 1.4  AT Command ==
52 +== AT Command ==
88 88  
89 -
90 90  AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
91 91  
92 92  
57 +== Dimension ==
93 93  
94 -== 1.5  Dimension ==
59 +[[image:image-20220517072526-1.png]]
95 95  
96 -[[image:image-20220718094750-3.png]]
97 97  
62 +== Pin Mapping ==
98 98  
64 +[[image:image-20220523101537-1.png]]
99 99  
100 -== 1.6  Pin Mapping ==
66 +== Land Pattern ==
101 101  
102 -[[image:image-20220720111850-1.png]]
103 -
104 -
105 -
106 -== 1.7  Land Pattern ==
107 -
108 -
109 109  [[image:image-20220517072821-2.png]]
110 110  
111 111  
112 -
113 -= 2.  LA66 LoRaWAN Shield =
114 -
115 -
116 -== 2.1  Overview ==
117 -
118 -
119 -(((
120 -[[image:image-20220715000826-2.png||height="145" width="220"]]
121 -)))
122 -
123 -(((
124 124  
125 -)))
126 126  
127 -(((
128 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
129 -)))
73 += LA66 LoRaWAN Shield =
130 130  
131 -(((
132 -(((
133 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
134 -)))
135 -)))
75 +== Overview ==
136 136  
137 -(((
138 -(((
139 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
140 -)))
141 -)))
77 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
142 142  
143 -(((
144 -(((
145 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
146 -)))
147 -)))
148 148  
149 -(((
150 -(((
151 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
152 -)))
153 -)))
80 +== Features ==
154 154  
155 -
156 -
157 -== 2.2  Features ==
158 -
159 -
160 160  * Arduino Shield base on LA66 LoRaWAN module
161 161  * Support LoRaWAN v1.0.4 protocol
162 162  * Support peer-to-peer protocol
... ... @@ -168,9 +168,8 @@
168 168  * Firmware upgradable via UART interface
169 169  * Ultra-long RF range
170 170  
171 -== 2.3  Specification ==
93 +== Specification ==
172 172  
173 -
174 174  * CPU: 32-bit 48 MHz
175 175  * Flash: 256KB
176 176  * RAM: 64KB
... ... @@ -189,106 +189,18 @@
189 189  * LoRa Rx current: <9 mA
190 190  * I/O Voltage: 3.3v
191 191  
192 -== 2.4  Pin Mapping & LED ==
113 +== Pin Mapping & LED ==
193 193  
115 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
194 194  
195 -~1. The LED lights up red when there is an upstream data packet
196 -2. When the network is successfully connected, the green light will be on for 5 seconds
197 -3. Purple light on when receiving downlink data packets
117 +== Example: Join TTN network and send an uplink message, get downlink message. ==
198 198  
119 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
199 199  
121 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
200 200  
201 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
123 +=== Items needed for update ===
202 202  
203 -
204 -**Show connection diagram：**
205 -
206 -
207 -[[image:image-20220723170210-2.png||height="908" width="681"]]
208 -
209 -
210 -
211 -(% style="color:blue" %)**1.  open Arduino IDE**
212 -
213 -
214 -[[image:image-20220723170545-4.png]]
215 -
216 -
217 -
218 -(% style="color:blue" %)**2.  Open project**
219 -
220 -
221 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
222 -
223 -[[image:image-20220726135239-1.png]]
224 -
225 -
226 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
227 -
228 -[[image:image-20220726135356-2.png]]
229 -
230 -
231 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
232 -
233 -
234 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
235 -
236 -
237 -
238 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
239 -
240 -
241 -(% style="color:blue" %)**1.  Open project**
242 -
243 -
244 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
245 -
246 -
247 -[[image:image-20220723172502-8.png]]
248 -
249 -
250 -
251 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
252 -
253 -
254 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
255 -
256 -
257 -
258 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
259 -
260 -
261 -(% style="color:blue" %)**1.  Open project**
262 -
263 -
264 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
265 -
266 -
267 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
268 -
269 -
270 -
271 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
272 -
273 -
274 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
275 -
276 -
277 -
278 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
279 -
280 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
281 -
282 -[[image:image-20220723175700-12.png||height="602" width="995"]]
283 -
284 -
285 -
286 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
287 -
288 -
289 -=== 2.8.1  Items needed for update ===
290 -
291 -
292 292  1. LA66 LoRaWAN Shield
293 293  1. Arduino
294 294  1. USB TO TTL Adapter
... ... @@ -296,24 +296,15 @@
296 296  [[image:image-20220602100052-2.png||height="385" width="600"]]
297 297  
298 298  
132 +=== Connection ===
299 299  
300 -=== 2.8.2  Connection ===
301 -
302 -
303 303  [[image:image-20220602101311-3.png||height="276" width="600"]]
304 304  
136 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
137 +**GND  <-> GND
138 +TXD  <-> TXD
139 +RXD  <-> RXD**
305 305  
306 -(((
307 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
308 -)))
309 -
310 -(((
311 -(% style="background-color:yellow" %)**GND  <-> GND
312 -TXD  <->  TXD
313 -RXD  <->  RXD**
314 -)))
315 -
316 -
317 317  Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
318 318  
319 319  Connect USB TTL Adapter to PC after connecting the wires
... ... @@ -322,117 +322,72 @@
322 322  [[image:image-20220602102240-4.png||height="304" width="600"]]
323 323  
324 324  
149 +=== Upgrade steps ===
325 325  
326 -=== 2.8.3  Upgrade steps ===
151 +==== Switch SW1 to put in ISP position ====
327 327  
328 -
329 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
330 -
331 -
332 332  [[image:image-20220602102824-5.png||height="306" width="600"]]
333 333  
334 334  
156 +==== Press the RST switch once ====
335 335  
336 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
337 -
338 -
339 339  [[image:image-20220602104701-12.png||height="285" width="600"]]
340 340  
341 341  
161 +==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
342 342  
343 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
163 +**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
344 344  
345 -
346 -(((
347 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
348 -)))
349 -
350 -
351 351  [[image:image-20220602103227-6.png]]
352 352  
353 -
354 354  [[image:image-20220602103357-7.png]]
355 355  
356 356  
357 -
358 358  (% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
359 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
171 +**2. Select the COM port corresponding to USB TTL**
360 360  
361 -
362 362  [[image:image-20220602103844-8.png]]
363 363  
364 364  
365 -
366 366  (% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
367 -(% style="color:blue" %)**3. Select the bin file to burn**
177 +**3. Select the bin file to burn**
368 368  
369 -
370 370  [[image:image-20220602104144-9.png]]
371 371  
372 -
373 373  [[image:image-20220602104251-10.png]]
374 374  
375 -
376 376  [[image:image-20220602104402-11.png]]
377 377  
378 378  
379 -
380 380  (% class="wikigeneratedid" id="HClicktostartthedownload" %)
381 -(% style="color:blue" %)**4. Click to start the download**
187 +**4. Click to start the download**
382 382  
383 383  [[image:image-20220602104923-13.png]]
384 384  
385 385  
386 -
387 387  (% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
388 -(% style="color:blue" %)**5. Check update process**
193 +**5. Check update process**
389 389  
390 -
391 391  [[image:image-20220602104948-14.png]]
392 392  
393 393  
394 -
395 395  (% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
396 -(% style="color:blue" %)**The following picture shows that the burning is successful**
199 +**The following picture shows that the burning is successful**
397 397  
398 398  [[image:image-20220602105251-15.png]]
399 399  
400 400  
204 +
401 401  
402 -= 3.  LA66 USB LoRaWAN Adapter =
206 += LA66 USB LoRaWAN Adapter =
403 403  
208 +== Overview ==
404 404  
405 -== 3.1  Overview ==
210 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
406 406  
407 407  
408 -[[image:image-20220715001142-3.png||height="145" width="220"]]
213 +== Features ==
409 409  
410 -
411 -(((
412 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
413 -)))
414 -
415 -(((
416 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
417 -)))
418 -
419 -(((
420 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
421 -)))
422 -
423 -(((
424 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
425 -)))
426 -
427 -(((
428 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
429 -)))
430 -
431 -
432 -
433 -== 3.2  Features ==
434 -
435 -
436 436  * LoRaWAN USB adapter base on LA66 LoRaWAN module
437 437  * Ultra-long RF range
438 438  * Support LoRaWAN v1.0.4 protocol
... ... @@ -443,11 +443,9 @@
443 443  * World-wide unique OTAA keys.
444 444  * AT Command via UART-TTL interface
445 445  * Firmware upgradable via UART interface
446 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
447 447  
448 -== 3.3  Specification ==
226 +== Specification ==
449 449  
450 -
451 451  * CPU: 32-bit 48 MHz
452 452  * Flash: 256KB
453 453  * RAM: 64KB
... ... @@ -464,25 +464,16 @@
464 464  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
465 465  * LoRa Rx current: <9 mA
466 466  
467 -== 3.4  Pin Mapping & LED ==
244 +== Pin Mapping & LED ==
468 468  
469 -[[image:image-20220813183239-3.png||height="526" width="662"]]
246 +== Example Send & Get Messages via LoRaWAN in PC ==
470 470  
471 -
472 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
473 -
474 -
475 -(((
476 476  Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
477 -)))
478 478  
250 +~1. Connect the LA66 USB LoRaWAN adapter to PC
479 479  
480 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
252 +[[image:image-20220602171217-1.png||height="538" width="800"]]
481 481  
482 -
483 -[[image:image-20220723100027-1.png]]
484 -
485 -
486 486  Open the serial port tool
487 487  
488 488  [[image:image-20220602161617-8.png]]
... ... @@ -490,76 +490,67 @@
490 490  [[image:image-20220602161718-9.png||height="457" width="800"]]
491 491  
492 492  
261 +2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
493 493  
494 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
495 -
496 496  The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
497 497  
498 -
499 499  [[image:image-20220602161935-10.png||height="498" width="800"]]
500 500  
501 501  
268 +3. See Uplink Command
502 502  
503 -(% style="color:blue" %)**3. See Uplink Command**
270 +Command format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
504 504  
505 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
506 -
507 507  example: AT+SENDB=01,02,8,05820802581ea0a5
508 508  
509 509  [[image:image-20220602162157-11.png||height="497" width="800"]]
510 510  
511 511  
277 +4. Check to see if TTN received the message
512 512  
513 -(% style="color:blue" %)**4. Check to see if TTN received the message**
514 -
515 515  [[image:image-20220602162331-12.png||height="420" width="800"]]
516 516  
517 517  
518 518  
519 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
283 +== Example:Send PC's CPU/RAM usage to TTN via python ==
520 520  
285 +(% class="wikigeneratedid" id="HUsepythonasanexampleFF1A" %)
286 +**Use python as an example：**
521 521  
522 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
288 +(% class="wikigeneratedid" id="HPreconditions:" %)
289 +**Preconditions:**
523 523  
524 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
291 +1.LA66 USB LoRaWAN Adapter works fine
525 525  
526 -(% style="color:red" %)**Preconditions:**
293 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
527 527  
528 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
295 +(% class="wikigeneratedid" id="HStepsforusage" %)
296 +**Steps for usage**
529 529  
530 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
298 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
531 531  
300 +2.Run the python script in PC and see the TTN
532 532  
533 -
534 -(% style="color:blue" %)**Steps for usage:**
535 -
536 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
537 -
538 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
539 -
540 540  [[image:image-20220602115852-3.png||height="450" width="1187"]]
541 541  
542 542  
543 543  
544 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
306 +== Example Send & Get Messages via LoRaWAN in RPi ==
545 545  
546 -
547 547  Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
548 548  
310 +~1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
549 549  
550 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
312 +[[image:image-20220602171233-2.png||height="538" width="800"]]
551 551  
552 -[[image:image-20220723100439-2.png]]
553 553  
315 +2. Install Minicom in RPi.
554 554  
555 -
556 -(% style="color:blue" %)**2. Install Minicom in RPi.**
557 -
558 558  (% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
559 559  
560 - (% style="background-color:yellow" %)**apt update**
319 +(% class="mark" %)apt update
561 561  
562 - (% style="background-color:yellow" %)**apt install minicom**
321 +(% class="mark" %)apt install minicom
563 563  
564 564  
565 565  Use minicom to connect to the RPI's terminal
... ... @@ -567,27 +567,20 @@
567 567  [[image:image-20220602153146-3.png||height="439" width="500"]]
568 568  
569 569  
329 +3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.
330 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
570 570  
571 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
572 -
573 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
574 -
575 -
576 576  [[image:image-20220602154928-5.png||height="436" width="500"]]
577 577  
578 578  
335 +4. Send Uplink message
579 579  
580 -(% style="color:blue" %)**4. Send Uplink message**
337 +Format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
581 581  
582 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
583 -
584 584  example: AT+SENDB=01,02,8,05820802581ea0a5
585 585  
586 -
587 587  [[image:image-20220602160339-6.png||height="517" width="600"]]
588 588  
589 -
590 -
591 591  Check to see if TTN received the message
592 592  
593 593  [[image:image-20220602160627-7.png||height="369" width="800"]]
... ... @@ -594,152 +594,35 @@
594 594  
595 595  
596 596  
597 -== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
349 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
598 598  
599 599  
600 -=== 3.8.1  Hardware and Software Connection ===
352 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
601 601  
602 602  
603 -==== (% style="color:blue" %)**Overview：**(%%) ====
604 604  
356 += Order Info =
605 605  
606 -(((
607 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
358 +Part Number:
608 608  
609 -* Send real-time location information of mobile phone to LoRaWAN network.
610 -* Check LoRaWAN network signal strengh.
611 -* Manually send messages to LoRaWAN network.
612 -)))
360 +**LA66-XXX**, **LA66-LoRaWAN-Shield-XXX** or **LA66-USB-LoRaWAN-Adapter-XXX**
613 613  
362 +**XXX**: The default frequency band
614 614  
364 +* **AS923**: LoRaWAN AS923 band
365 +* **AU915**: LoRaWAN AU915 band
366 +* **EU433**: LoRaWAN EU433 band
367 +* **EU868**: LoRaWAN EU868 band
368 +* **KR920**: LoRaWAN KR920 band
369 +* **US915**: LoRaWAN US915 band
370 +* **IN865**: LoRaWAN IN865 band
371 +* **CN470**: LoRaWAN CN470 band
372 +* **PP**: Peer to Peer LoRa Protocol
615 615  
616 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
617 617  
618 -A USB to Type-C adapter is needed to connect to a Mobile phone.
619 619  
620 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
376 += Reference =
621 621  
622 -[[image:image-20220813174353-2.png||height="360" width="313"]]
623 -
624 -
625 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
626 -
627 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
628 -
629 -[[image:image-20220813173738-1.png]]
630 -
631 -
632 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
633 -
634 -Function and page introduction
635 -
636 -[[image:image-20220723113448-7.png||height="995" width="450"]]
637 -
638 -**Block Explain:**
639 -
640 -1.  Display LA66 USB LoRaWAN Module connection status
641 -
642 -2.  Check and reconnect
643 -
644 -3.  Turn send timestamps on or off
645 -
646 -4.  Display LoRaWan connection status
647 -
648 -5.  Check LoRaWan connection status
649 -
650 -6.  The RSSI value of the node when the ACK is received
651 -
652 -7.  Node's Signal Strength Icon
653 -
654 -8.  Configure Location Uplink Interval
655 -
656 -9.  AT command input box
657 -
658 -10.  Send Button:  Send input box info to LA66 USB Adapter
659 -
660 -11.  Output Log from LA66 USB adapter
661 -
662 -12.  clear log button
663 -
664 -13.  exit button
665 -
666 -
667 -LA66 USB LoRaWAN Module not connected
668 -
669 -[[image:image-20220723110520-5.png||height="677" width="508"]]
670 -
671 -
672 -
673 -Connect LA66 USB LoRaWAN Module
674 -
675 -[[image:image-20220723110626-6.png||height="681" width="511"]]
676 -
677 -
678 -
679 -=== 3.8.2 Send data to TTNv3 and plot location info in Node-Red ===
680 -
681 -
682 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
683 -
684 -[[image:image-20220723134549-8.png]]
685 -
686 -
687 -
688 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
689 -
690 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
691 -
692 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
693 -
694 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
695 -
696 -
697 -Example output in NodeRed is as below:
698 -
699 -[[image:image-20220723144339-1.png]]
700 -
701 -
702 -
703 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
704 -
705 -
706 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
707 -
708 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
709 -
710 -[[image:image-20220723150132-2.png]]
711 -
712 -
713 -
714 -= 4.  FAQ =
715 -
716 -
717 -== 4.1  How to Compile Source Code for LA66? ==
718 -
719 -
720 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Compile and Upload Code to ASR6601 Platform]]
721 -
722 -
723 -
724 -= 5.  Order Info =
725 -
726 -
727 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
728 -
729 -
730 -(% style="color:blue" %)**XXX**(%%): The default frequency band
731 -
732 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
733 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
734 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
735 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
736 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
737 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
738 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
739 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
740 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
741 -
742 -= 6.  Reference =
743 -
744 -
745 745  * Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
379 +
380 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0