Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 140.1 >
edited by Edwin Chen
on 2022/08/13 18:09
To version < 87.8 >
edited by Xiaoling
on 2022/07/13 10:01
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,7 +1,5 @@
1 1  
2 2  
3 -**Table of Contents:**
4 -
5 5  {{toc/}}
6 6  
7 7  
... ... @@ -12,47 +12,19 @@
12 12  == 1.1  What is LA66 LoRaWAN Module ==
13 13  
14 14  
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 25  (% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 -)))
27 -)))
28 28  
29 -(((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 -)))
33 -)))
15 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
34 34  
35 -(((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 -)))
39 39  
40 -(((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 -)))
43 -)))
44 44  
45 -(((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 -)))
49 -)))
50 50  
51 51  
52 -
53 53  == 1.2  Features ==
54 54  
55 -
56 56  * Support LoRaWAN v1.0.4 protocol
57 57  * Support peer-to-peer protocol
58 58  * TCXO crystal to ensure RF performance on low temperature
... ... @@ -65,10 +65,8 @@
65 65  
66 66  
67 67  
68 -
69 69  == 1.3  Specification ==
70 70  
71 -
72 72  * CPU: 32-bit 48 MHz
73 73  * Flash: 256KB
74 74  * RAM: 64KB
... ... @@ -89,29 +89,26 @@
89 89  
90 90  
91 91  
92 -
93 93  == 1.4  AT Command ==
94 94  
95 -
96 96  AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
97 97  
98 98  
99 -
100 100  == 1.5  Dimension ==
101 101  
102 -[[image:image-20220718094750-3.png]]
67 +[[image:image-20220517072526-1.png]]
103 103  
104 104  
105 105  
106 106  == 1.6  Pin Mapping ==
107 107  
108 -[[image:image-20220720111850-1.png]]
109 109  
74 +[[image:image-20220523101537-1.png]]
110 110  
111 111  
77 +
112 112  == 1.7  Land Pattern ==
113 113  
114 -
115 115  [[image:image-20220517072821-2.png]]
116 116  
117 117  
... ... @@ -121,48 +121,11 @@
121 121  
122 122  == 2.1  Overview ==
123 123  
89 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
124 124  
125 -(((
126 -[[image:image-20220715000826-2.png||height="145" width="220"]]
127 -)))
128 128  
129 -(((
130 -
131 -)))
132 -
133 -(((
134 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
135 -)))
136 -
137 -(((
138 -(((
139 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
140 -)))
141 -)))
142 -
143 -(((
144 -(((
145 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
146 -)))
147 -)))
148 -
149 -(((
150 -(((
151 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
152 -)))
153 -)))
154 -
155 -(((
156 -(((
157 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
158 -)))
159 -)))
160 -
161 -
162 -
163 163  == 2.2  Features ==
164 164  
165 -
166 166  * Arduino Shield base on LA66 LoRaWAN module
167 167  * Support LoRaWAN v1.0.4 protocol
168 168  * Support peer-to-peer protocol
... ... @@ -176,10 +176,8 @@
176 176  
177 177  
178 178  
179 -
180 180  == 2.3  Specification ==
181 181  
182 -
183 183  * CPU: 32-bit 48 MHz
184 184  * Flash: 256KB
185 185  * RAM: 64KB
... ... @@ -200,107 +200,27 @@
200 200  
201 201  
202 202  
129 +== 2.4  Pin Mapping & LED ==
203 203  
204 -== 2.4  LED ==
205 205  
206 206  
207 -~1. The LED lights up red when there is an upstream data packet
208 -2. When the network is successfully connected, the green light will be on for 5 seconds
209 -3. Purple light on when receiving downlink data packets
210 -
211 -
212 -
213 213  == 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
214 214  
215 215  
216 -**Show connection diagram：**
217 217  
218 -
219 -[[image:image-20220723170210-2.png||height="908" width="681"]]
220 -
221 -
222 -
223 -(% style="color:blue" %)**1.  open Arduino IDE**
224 -
225 -
226 -[[image:image-20220723170545-4.png]]
227 -
228 -
229 -
230 -(% style="color:blue" %)**2.  Open project**
231 -
232 -
233 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
234 -
235 -[[image:image-20220726135239-1.png]]
236 -
237 -
238 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
239 -
240 -[[image:image-20220726135356-2.png]]
241 -
242 -
243 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
244 -
245 -
246 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
247 -
248 -
249 -
250 250  == 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
251 251  
252 252  
253 -(% style="color:blue" %)**1.  Open project**
254 254  
141 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
255 255  
256 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
257 257  
258 258  
259 -[[image:image-20220723172502-8.png]]
260 -
261 -
262 -
263 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
264 -
265 -
266 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
267 -
268 -
269 -
270 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
271 -
272 -
273 -(% style="color:blue" %)**1.  Open project**
274 -
275 -
276 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
277 -
278 -
279 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
280 -
281 -
282 -
283 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
284 -
285 -
286 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
287 -
288 -
289 -
290 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
291 -
292 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
293 -
294 -[[image:image-20220723175700-12.png||height="602" width="995"]]
295 -
296 -
297 -
298 298  == 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
299 299  
300 300  
301 301  === 2.8.1  Items needed for update ===
302 302  
303 -
304 304  1. LA66 LoRaWAN Shield
305 305  1. Arduino
306 306  1. USB TO TTL Adapter
... ... @@ -308,7 +308,6 @@
308 308  [[image:image-20220602100052-2.png||height="385" width="600"]]
309 309  
310 310  
311 -
312 312  === 2.8.2  Connection ===
313 313  
314 314  
... ... @@ -315,15 +315,11 @@
315 315  [[image:image-20220602101311-3.png||height="276" width="600"]]
316 316  
317 317  
318 -(((
319 319  (% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
320 -)))
321 321  
322 -(((
323 323  (% style="background-color:yellow" %)**GND  <-> GND
324 324  TXD  <->  TXD
325 325  RXD  <->  RXD**
326 -)))
327 327  
328 328  
329 329  Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
... ... @@ -334,30 +334,24 @@
334 334  [[image:image-20220602102240-4.png||height="304" width="600"]]
335 335  
336 336  
337 -
338 338  === 2.8.3  Upgrade steps ===
339 339  
340 340  
341 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
181 +==== 1.  Switch SW1 to put in ISP position ====
342 342  
343 343  
344 344  [[image:image-20220602102824-5.png||height="306" width="600"]]
345 345  
346 346  
187 +==== 2.  Press the RST switch once ====
347 347  
348 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
349 -
350 -
351 351  [[image:image-20220602104701-12.png||height="285" width="600"]]
352 352  
353 353  
192 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
354 354  
355 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
356 356  
357 -
358 -(((
359 359  (% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
360 -)))
361 361  
362 362  
363 363  [[image:image-20220602103227-6.png]]
... ... @@ -395,7 +395,6 @@
395 395  [[image:image-20220602104923-13.png]]
396 396  
397 397  
398 -
399 399  (% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
400 400  (% style="color:blue" %)**5. Check update process**
401 401  
... ... @@ -416,35 +416,11 @@
416 416  
417 417  == 3.1  Overview ==
418 418  
253 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
419 419  
420 -[[image:image-20220715001142-3.png||height="145" width="220"]]
421 421  
422 -
423 -(((
424 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
425 -)))
426 -
427 -(((
428 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
429 -)))
430 -
431 -(((
432 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
433 -)))
434 -
435 -(((
436 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
437 -)))
438 -
439 -(((
440 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
441 -)))
442 -
443 -
444 -
445 445  == 3.2  Features ==
446 446  
447 -
448 448  * LoRaWAN USB adapter base on LA66 LoRaWAN module
449 449  * Ultra-long RF range
450 450  * Support LoRaWAN v1.0.4 protocol
... ... @@ -455,14 +455,9 @@
455 455  * World-wide unique OTAA keys.
456 456  * AT Command via UART-TTL interface
457 457  * Firmware upgradable via UART interface
458 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
459 459  
460 -
461 -
462 -
463 463  == 3.3  Specification ==
464 464  
465 -
466 466  * CPU: 32-bit 48 MHz
467 467  * Flash: 256KB
468 468  * RAM: 64KB
... ... @@ -479,9 +479,6 @@
479 479  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
480 480  * LoRa Rx current: <9 mA
481 481  
482 -
483 -
484 -
485 485  == 3.4  Pin Mapping & LED ==
486 486  
487 487  
... ... @@ -489,15 +489,13 @@
489 489  == 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
490 490  
491 491  
492 -(((
493 493  Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
494 -)))
495 495  
496 496  
497 497  (% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
498 498  
499 499  
500 -[[image:image-20220723100027-1.png]]
300 +[[image:image-20220602171217-1.png||height="538" width="800"]]
501 501  
502 502  
503 503  Open the serial port tool
... ... @@ -538,7 +538,6 @@
538 538  
539 539  **Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
540 540  
541 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
542 542  
543 543  (% style="color:red" %)**Preconditions:**
544 544  
... ... @@ -566,7 +566,7 @@
566 566  
567 567  (% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
568 568  
569 -[[image:image-20220723100439-2.png]]
368 +[[image:image-20220602171233-2.png||height="538" width="800"]]
570 570  
571 571  
572 572  
... ... @@ -585,11 +585,9 @@
585 585  
586 586  
587 587  
588 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
387 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**(%%)
388 +(% style="color:blue" %)The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
589 589  
590 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
591 -
592 -
593 593  [[image:image-20220602154928-5.png||height="436" width="500"]]
594 594  
595 595  
... ... @@ -611,136 +611,18 @@
611 611  
612 612  
613 613  
614 -== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
411 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
615 615  
616 616  
617 -=== 3.8.1  Hardware and Software Connection ===
618 618  
619 -
620 -==== (% style="color:blue" %)**Overview：**(%%) ====
621 -
622 -
623 -(((
624 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
625 -
626 -* Send real-time location information of mobile phone to LoRaWAN network.
627 -* Check LoRaWAN network signal strengh.
628 -* Manually send messages to LoRaWAN network.
629 -)))
630 -
631 -
632 -
633 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
634 -
635 -A USB to Type-C adapter is needed to connect to a Mobile phone.
636 -
637 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
638 -
639 -[[image:image-20220813174353-2.png||height="360" width="313"]]
640 -
641 -
642 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
643 -
644 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
645 -
646 -[[image:image-20220813173738-1.png]]
647 -
648 -
649 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
650 -
651 -Function and page introduction
652 -
653 -[[image:image-20220723113448-7.png||height="995" width="450"]]
654 -
655 -**Block Explain:**
656 -
657 -1.  Display LA66 USB LoRaWAN Module connection status
658 -
659 -2.  Check and reconnect
660 -
661 -3.  Turn send timestamps on or off
662 -
663 -4.  Display LoRaWan connection status
664 -
665 -5.  Check LoRaWan connection status
666 -
667 -6.  The RSSI value of the node when the ACK is received
668 -
669 -7.  Node's Signal Strength Icon
670 -
671 -8.  Configure Location Uplink Interval
672 -
673 -9.  AT command input box
674 -
675 -10.  Send Button:  Send input box info to LA66 USB Adapter
676 -
677 -11.  Output Log from LA66 USB adapter
678 -
679 -12.  clear log button
680 -
681 -13.  exit button
682 -
683 -
684 -LA66 USB LoRaWAN Module not connected
685 -
686 -[[image:image-20220723110520-5.png||height="677" width="508"]]
687 -
688 -
689 -
690 -Connect LA66 USB LoRaWAN Module
691 -
692 -[[image:image-20220723110626-6.png||height="681" width="511"]]
693 -
694 -
695 -
696 -=== 3.8.2  Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
697 -
698 -
699 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
700 -
701 -[[image:image-20220723134549-8.png]]
702 -
703 -
704 -
705 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
706 -
707 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
708 -
709 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
710 -
711 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
712 -
713 -
714 -Example output in NodeRed is as below:
715 -
716 -[[image:image-20220723144339-1.png]]
717 -
718 -
719 -
720 720  == 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
721 721  
722 722  
723 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
724 724  
725 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
726 726  
727 -[[image:image-20220723150132-2.png]]
420 += 4.  Order Info =
728 728  
729 729  
730 -
731 -= 4.  FAQ =
732 -
733 -
734 -== 4.1  How to Compile Source Code for LA66? ==
735 -
736 -
737 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Compile and Upload Code to ASR6601 Platform]]
738 -
739 -
740 -
741 -= 5.  Order Info =
742 -
743 -
744 744  **Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
745 745  
746 746  
... ... @@ -759,7 +759,8 @@
759 759  
760 760  
761 761  
762 -= 6.  Reference =
441 += 5.  Reference =
763 763  
764 -
765 765  * Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
444 +
445 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0