Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 138.1 >
edited by Edwin Chen
on 2022/08/13 17:37
To version < 70.1 >
edited by Edwin Chen
on 2022/07/02 23:51
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,58 +1,24 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 -
11 -
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 -
14 -
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 25  (% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 -)))
27 -)))
28 28  
29 -(((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 -)))
33 -)))
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
34 34  
35 -(((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 -)))
39 39  
40 -(((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 -)))
43 -)))
44 44  
45 -(((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 -)))
49 -)))
50 50  
51 51  
20 +== Features ==
52 52  
53 -== 1.2  Features ==
54 -
55 -
56 56  * Support LoRaWAN v1.0.4 protocol
57 57  * Support peer-to-peer protocol
58 58  * TCXO crystal to ensure RF performance on low temperature
... ... @@ -65,11 +65,8 @@
65 65  
66 66  
67 67  
34 +== Specification ==
68 68  
69 -
70 -== 1.3  Specification ==
71 -
72 -
73 73  * CPU: 32-bit 48 MHz
74 74  * Flash: 256KB
75 75  * RAM: 64KB
... ... @@ -88,679 +88,221 @@
88 88  * LoRa Rx current: <9 mA
89 89  * I/O Voltage: 3.3v
90 90  
54 +== AT Command ==
91 91  
92 -
93 -
94 -
95 -== 1.4  AT Command ==
96 -
97 -
98 98  AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
99 99  
100 100  
59 +== Dimension ==
101 101  
102 -== 1.5  Dimension ==
61 +[[image:image-20220517072526-1.png]]
103 103  
104 -[[image:image-20220718094750-3.png]]
105 105  
64 +== Pin Mapping ==
106 106  
66 +[[image:image-20220523101537-1.png]]
107 107  
108 -== 1.6  Pin Mapping ==
68 +== Land Pattern ==
109 109  
110 -[[image:image-20220720111850-1.png]]
111 -
112 -
113 -
114 -== 1.7  Land Pattern ==
115 -
116 -
117 117  [[image:image-20220517072821-2.png]]
118 118  
119 119  
73 +== Part Number ==
120 120  
121 -= 2.  LA66 LoRaWAN Shield =
75 +Part Number: **LA66-XXX**
122 122  
77 +**XX**: The default frequency band
123 123  
124 -== 2.1  Overview ==
79 +* **AS923**: LoRaWAN AS923 band
80 +* **AU915**: LoRaWAN AU915 band
81 +* **EU433**: LoRaWAN EU433 band
82 +* **EU868**: LoRaWAN EU868 band
83 +* **KR920**: LoRaWAN KR920 band
84 +* **US915**: LoRaWAN US915 band
85 +* **IN865**: LoRaWAN IN865 band
86 +* **CN470**: LoRaWAN CN470 band
87 +* **PP**: Peer to Peer LoRa Protocol
125 125  
89 += LA66 LoRaWAN Shield =
126 126  
127 -(((
128 -[[image:image-20220715000826-2.png||height="145" width="220"]]
129 -)))
91 +LA66 LoRaWAN Shield is the Arduino Breakout PCB to fast test the features of LA66 module and turn Arduino to support LoRaWAN.
130 130  
131 -(((
132 -
133 -)))
93 +== Pin Mapping & LED ==
134 134  
135 -(((
136 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
137 -)))
95 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
138 138  
139 -(((
140 -(((
141 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
142 -)))
143 -)))
97 +== Example: Join TTN network and send an uplink message, get downlink message. ==
144 144  
145 -(((
146 -(((
147 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
148 -)))
149 -)))
99 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
150 150  
151 -(((
152 -(((
153 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
154 -)))
155 -)))
101 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
156 156  
157 -(((
158 -(((
159 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
160 -)))
161 -)))
103 +=== what needs to be used ===
162 162  
105 +1.LA66 LoRaWAN Shield that needs to be upgraded
163 163  
107 +2.Arduino
164 164  
165 -== 2.2  Features ==
109 +3.USB TO TTL
166 166  
111 +[[image:image-20220602100052-2.png]]
167 167  
168 -* Arduino Shield base on LA66 LoRaWAN module
169 -* Support LoRaWAN v1.0.4 protocol
170 -* Support peer-to-peer protocol
171 -* TCXO crystal to ensure RF performance on low temperature
172 -* SMA connector
173 -* Available in different frequency LoRaWAN frequency bands.
174 -* World-wide unique OTAA keys.
175 -* AT Command via UART-TTL interface
176 -* Firmware upgradable via UART interface
177 -* Ultra-long RF range
113 +=== Wiring Schematic ===
178 178  
115 +[[image:image-20220602101311-3.png]]
179 179  
117 +LA66 LoRaWAN Shield  >>>>>>>>>>>>USB TTL
180 180  
119 +GND  >>>>>>>>>>>>GND
181 181  
121 +TXD  >>>>>>>>>>>>TXD
182 182  
183 -== 2.3  Specification ==
123 +RXD  >>>>>>>>>>>>RXD
184 184  
125 +JP6 of LA66 LoRaWAN Shield needs to be connected with yellow jumper cap
185 185  
186 -* CPU: 32-bit 48 MHz
187 -* Flash: 256KB
188 -* RAM: 64KB
189 -* Input Power Range: 1.8v ~~ 3.7v
190 -* Power Consumption: < 4uA.
191 -* Frequency Range: 150 MHz ~~ 960 MHz
192 -* Maximum Power +22 dBm constant RF output
193 -* High sensitivity: -148 dBm
194 -* Temperature:
195 -** Storage: -55 ~~ +125℃
196 -** Operating: -40 ~~ +85℃
197 -* Humidity:
198 -** Storage: 5 ~~ 95% (Non-Condensing)
199 -** Operating: 10 ~~ 95% (Non-Condensing)
200 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
201 -* LoRa Rx current: <9 mA
202 -* I/O Voltage: 3.3v
127 +Connect to the PC after connecting the wires
203 203  
129 +[[image:image-20220602102240-4.png]]
204 204  
131 +=== Upgrade steps ===
205 205  
133 +==== Dial the SW1 of the LA66 LoRaWAN Shield to the ISP's location as shown in the figure below ====
206 206  
135 +[[image:image-20220602102824-5.png]]
207 207  
208 -== 2.4  LED ==
137 +==== Press the RST switch on the LA66 LoRaWAN Shield once ====
209 209  
139 +[[image:image-20220602104701-12.png]]
210 210  
211 -~1. The LED lights up red when there is an upstream data packet
212 -2. When the network is successfully connected, the green light will be on for 5 seconds
213 -3. Purple light on when receiving downlink data packets
141 +==== Open the upgrade application software ====
214 214  
143 +Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
215 215  
216 -
217 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
218 -
219 -
220 -**Show connection diagram：**
221 -
222 -
223 -[[image:image-20220723170210-2.png||height="908" width="681"]]
224 -
225 -
226 -
227 -(% style="color:blue" %)**1.  open Arduino IDE**
228 -
229 -
230 -[[image:image-20220723170545-4.png]]
231 -
232 -
233 -
234 -(% style="color:blue" %)**2.  Open project**
235 -
236 -
237 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
238 -
239 -[[image:image-20220726135239-1.png]]
240 -
241 -
242 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
243 -
244 -[[image:image-20220726135356-2.png]]
245 -
246 -
247 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
248 -
249 -
250 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
251 -
252 -
253 -
254 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
255 -
256 -
257 -(% style="color:blue" %)**1.  Open project**
258 -
259 -
260 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
261 -
262 -
263 -[[image:image-20220723172502-8.png]]
264 -
265 -
266 -
267 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
268 -
269 -
270 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
271 -
272 -
273 -
274 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
275 -
276 -
277 -(% style="color:blue" %)**1.  Open project**
278 -
279 -
280 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
281 -
282 -
283 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
284 -
285 -
286 -
287 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
288 -
289 -
290 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
291 -
292 -
293 -
294 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
295 -
296 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
297 -
298 -[[image:image-20220723175700-12.png||height="602" width="995"]]
299 -
300 -
301 -
302 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
303 -
304 -
305 -=== 2.8.1  Items needed for update ===
306 -
307 -
308 -1. LA66 LoRaWAN Shield
309 -1. Arduino
310 -1. USB TO TTL Adapter
311 -
312 -[[image:image-20220602100052-2.png||height="385" width="600"]]
313 -
314 -
315 -
316 -=== 2.8.2  Connection ===
317 -
318 -
319 -[[image:image-20220602101311-3.png||height="276" width="600"]]
320 -
321 -
322 -(((
323 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
324 -)))
325 -
326 -(((
327 -(% style="background-color:yellow" %)**GND  <-> GND
328 -TXD  <->  TXD
329 -RXD  <->  RXD**
330 -)))
331 -
332 -
333 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
334 -
335 -Connect USB TTL Adapter to PC after connecting the wires
336 -
337 -
338 -[[image:image-20220602102240-4.png||height="304" width="600"]]
339 -
340 -
341 -
342 -=== 2.8.3  Upgrade steps ===
343 -
344 -
345 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
346 -
347 -
348 -[[image:image-20220602102824-5.png||height="306" width="600"]]
349 -
350 -
351 -
352 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
353 -
354 -
355 -[[image:image-20220602104701-12.png||height="285" width="600"]]
356 -
357 -
358 -
359 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
360 -
361 -
362 -(((
363 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
364 -)))
365 -
366 -
367 367  [[image:image-20220602103227-6.png]]
368 368  
369 -
370 370  [[image:image-20220602103357-7.png]]
371 371  
149 +===== Select the COM port corresponding to USB TTL =====
372 372  
373 -
374 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
375 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
376 -
377 -
378 378  [[image:image-20220602103844-8.png]]
379 379  
153 +===== Select the bin file to burn =====
380 380  
381 -
382 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
383 -(% style="color:blue" %)**3. Select the bin file to burn**
384 -
385 -
386 386  [[image:image-20220602104144-9.png]]
387 387  
388 -
389 389  [[image:image-20220602104251-10.png]]
390 390  
391 -
392 392  [[image:image-20220602104402-11.png]]
393 393  
161 +===== Click to start the download =====
394 394  
395 -
396 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
397 -(% style="color:blue" %)**4. Click to start the download**
398 -
399 399  [[image:image-20220602104923-13.png]]
400 400  
165 +===== The following figure appears to prove that the burning is in progress =====
401 401  
402 -
403 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
404 -(% style="color:blue" %)**5. Check update process**
405 -
406 -
407 407  [[image:image-20220602104948-14.png]]
408 408  
169 +===== The following picture appears to prove that the burning is successful =====
409 409  
410 -
411 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
412 -(% style="color:blue" %)**The following picture shows that the burning is successful**
413 -
414 414  [[image:image-20220602105251-15.png]]
415 415  
173 += LA66 USB LoRaWAN Adapter =
416 416  
175 +LA66 USB LoRaWAN Adapter is the USB Adapter for LA66, it combines a USB TTL Chip and LA66 module which can easy to test the LoRaWAN feature by using PC or embedded device which has USB Interface.
417 417  
418 -= 3.  LA66 USB LoRaWAN Adapter =
177 +Before use, please make sure that the computer has installed the CP2102 driver
419 419  
179 +== Pin Mapping & LED ==
420 420  
421 -== 3.1  Overview ==
181 +== Example Send & Get Messages via LoRaWAN in PC ==
422 422  
183 +Connect the LA66 LoRa Shield to the PC
423 423  
424 -[[image:image-20220715001142-3.png||height="145" width="220"]]
185 +[[image:image-20220602171217-1.png||height="615" width="915"]]
425 425  
426 -
427 -(((
428 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
429 -)))
430 -
431 -(((
432 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
433 -)))
434 -
435 -(((
436 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
437 -)))
438 -
439 -(((
440 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
441 -)))
442 -
443 -(((
444 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
445 -)))
446 -
447 -
448 -
449 -== 3.2  Features ==
450 -
451 -
452 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
453 -* Ultra-long RF range
454 -* Support LoRaWAN v1.0.4 protocol
455 -* Support peer-to-peer protocol
456 -* TCXO crystal to ensure RF performance on low temperature
457 -* Spring RF antenna
458 -* Available in different frequency LoRaWAN frequency bands.
459 -* World-wide unique OTAA keys.
460 -* AT Command via UART-TTL interface
461 -* Firmware upgradable via UART interface
462 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
463 -
464 -
465 -
466 -
467 -
468 -== 3.3  Specification ==
469 -
470 -
471 -* CPU: 32-bit 48 MHz
472 -* Flash: 256KB
473 -* RAM: 64KB
474 -* Input Power Range: 5v
475 -* Frequency Range: 150 MHz ~~ 960 MHz
476 -* Maximum Power +22 dBm constant RF output
477 -* High sensitivity: -148 dBm
478 -* Temperature:
479 -** Storage: -55 ~~ +125℃
480 -** Operating: -40 ~~ +85℃
481 -* Humidity:
482 -** Storage: 5 ~~ 95% (Non-Condensing)
483 -** Operating: 10 ~~ 95% (Non-Condensing)
484 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
485 -* LoRa Rx current: <9 mA
486 -
487 -
488 -
489 -
490 -
491 -== 3.4  Pin Mapping & LED ==
492 -
493 -
494 -
495 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
496 -
497 -
498 -(((
499 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
500 -)))
501 -
502 -
503 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
504 -
505 -
506 -[[image:image-20220723100027-1.png]]
507 -
508 -
509 509  Open the serial port tool
510 510  
511 511  [[image:image-20220602161617-8.png]]
512 512  
513 -[[image:image-20220602161718-9.png||height="457" width="800"]]
191 +[[image:image-20220602161718-9.png||height="529" width="927"]]
514 514  
193 +Press the reset switch RST on the LA66 LoRa Shield.
515 515  
195 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
516 516  
517 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
197 +[[image:image-20220602161935-10.png]]
518 518  
519 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
199 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
520 520  
521 -
522 -[[image:image-20220602161935-10.png||height="498" width="800"]]
523 -
524 -
525 -
526 -(% style="color:blue" %)**3. See Uplink Command**
527 -
528 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
529 -
530 530  example: AT+SENDB=01,02,8,05820802581ea0a5
531 531  
532 -[[image:image-20220602162157-11.png||height="497" width="800"]]
203 +[[image:image-20220602162157-11.png]]
533 533  
205 +Check to see if TTN received the message
534 534  
207 +[[image:image-20220602162331-12.png||height="547" width="1044"]]
535 535  
536 -(% style="color:blue" %)**4. Check to see if TTN received the message**
209 +== Example Send & Get Messages via LoRaWAN in RPi ==
537 537  
538 -[[image:image-20220602162331-12.png||height="420" width="800"]]
211 +Connect the LA66 LoRa Shield to the RPI
539 539  
213 +[[image:image-20220602171233-2.png||height="592" width="881"]]
540 540  
215 +Log in to the RPI's terminal and connect to the serial port
541 541  
542 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
217 +[[image:image-20220602153146-3.png]]
543 543  
219 +Press the reset switch RST on the LA66 LoRa Shield.
220 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
544 544  
545 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
222 +[[image:image-20220602154928-5.png]]
546 546  
547 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
224 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
548 548  
549 -(% style="color:red" %)**Preconditions:**
550 -
551 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
552 -
553 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
554 -
555 -
556 -
557 -(% style="color:blue" %)**Steps for usage:**
558 -
559 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
560 -
561 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
562 -
563 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
564 -
565 -
566 -
567 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
568 -
569 -
570 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
571 -
572 -
573 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
574 -
575 -[[image:image-20220723100439-2.png]]
576 -
577 -
578 -
579 -(% style="color:blue" %)**2. Install Minicom in RPi.**
580 -
581 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
582 -
583 - (% style="background-color:yellow" %)**apt update**
584 -
585 - (% style="background-color:yellow" %)**apt install minicom**
586 -
587 -
588 -Use minicom to connect to the RPI's terminal
589 -
590 -[[image:image-20220602153146-3.png||height="439" width="500"]]
591 -
592 -
593 -
594 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
595 -
596 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
597 -
598 -
599 -[[image:image-20220602154928-5.png||height="436" width="500"]]
600 -
601 -
602 -
603 -(% style="color:blue" %)**4. Send Uplink message**
604 -
605 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
606 -
607 607  example: AT+SENDB=01,02,8,05820802581ea0a5
608 608  
228 +[[image:image-20220602160339-6.png]]
609 609  
610 -[[image:image-20220602160339-6.png||height="517" width="600"]]
611 -
612 -
613 -
614 614  Check to see if TTN received the message
615 615  
616 -[[image:image-20220602160627-7.png||height="369" width="800"]]
232 +[[image:image-20220602160627-7.png||height="468" width="1013"]]
617 617  
234 +=== Install Minicom ===
618 618  
236 +Enter the following command in the RPI terminal
619 619  
620 -== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
238 +apt update
621 621  
240 +[[image:image-20220602143155-1.png]]
622 622  
623 -=== 3.8.1  DRAGINO-LA66-APP ===
242 +apt install minicom
624 624  
244 +[[image:image-20220602143744-2.png]]
625 625  
626 -[[image:image-20220723102027-3.png]]
246 +=== Send PC's CPU/RAM usage to TTN via script. ===
627 627  
248 +==== Take python as an example： ====
628 628  
250 +===== Preconditions: =====
629 629  
630 -==== (% style="color:blue" %)**Overview：**(%%) ====
252 +1.LA66 USB LoRaWAN Adapter works fine
631 631  
254 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
632 632  
633 -(((
634 -DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
635 -)))
256 +===== Steps for usage =====
636 636  
637 -(((
638 -View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
639 -)))
258 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
640 640  
260 +2.Run the script and see the TTN
641 641  
262 +[[image:image-20220602115852-3.png]]
642 642  
643 -==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
644 644  
645 645  
646 -Requires a type-c to USB adapter
266 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
647 647  
648 -[[image:image-20220723104754-4.png]]
649 649  
269 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
650 650  
651 -
652 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
653 -
654 -
655 -Function and page introduction
656 -
657 -[[image:image-20220723113448-7.png||height="1481" width="670"]]
658 -
659 -
660 -1.Display LA66 USB LoRaWAN Module connection status
661 -
662 -2.Check and reconnect
663 -
664 -3.Turn send timestamps on or off
665 -
666 -4.Display LoRaWan connection status
667 -
668 -5.Check LoRaWan connection status
669 -
670 -6.The RSSI value of the node when the ACK is received
671 -
672 -7.Node's Signal Strength Icon
673 -
674 -8.Set the packet sending interval of the node in seconds
675 -
676 -9.AT command input box
677 -
678 -10.Send AT command button
679 -
680 -11.Node log box
681 -
682 -12.clear log button
683 -
684 -13.exit button
685 -
686 -
687 -LA66 USB LoRaWAN Module not connected
688 -
689 -[[image:image-20220723110520-5.png||height="903" width="677"]]
690 -
691 -
692 -
693 -Connect LA66 USB LoRaWAN Module
694 -
695 -[[image:image-20220723110626-6.png||height="906" width="680"]]
696 -
697 -
698 -
699 -=== 3.8.2  Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
700 -
701 -
702 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
703 -
704 -[[image:image-20220723134549-8.png]]
705 -
706 -
707 -
708 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
709 -
710 -Sample JSON file please go to this link to download：放置JSON文件的链接
711 -
712 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
713 -
714 -The following is the positioning effect map
715 -
716 -[[image:image-20220723144339-1.png]]
717 -
718 -
719 -
720 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
721 -
722 -
723 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
724 -
725 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
726 -
727 -[[image:image-20220723150132-2.png]]
728 -
729 -
730 -
731 -= 4.  FAQ =
732 -
733 -
734 -== 4.1  How to Compile Source Code for LA66? ==
735 -
736 -
737 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Compile and Upload Code to ASR6601 Platform]]
738 -
739 -
740 -
741 -= 5.  Order Info =
742 -
743 -
744 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
745 -
746 -
747 -(% style="color:blue" %)**XXX**(%%): The default frequency band
748 -
749 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
750 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
751 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
752 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
753 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
754 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
755 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
756 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
757 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
758 -
759 -
760 -
761 -
762 -
763 -= 6.  Reference =
764 -
765 -
766 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
271 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0