Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 137.3 >
edited by Xiaoling
on 2022/07/29 09:17
To version < 166.2 >
edited by Xiaoling
on 2022/11/14 11:41
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Content
... ... @@ -6,114 +6,14 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
10 += 1.  LA66 LoRaWAN Shield =
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 13  
13 +== 1.1  Overview ==
14 14  
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 19  
20 20  (((
21 -
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 -)))
27 -)))
28 -
29 -(((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 -)))
33 -)))
34 -
35 -(((
36 -(((
37 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 -)))
39 -
40 -(((
41 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 -)))
43 -)))
44 -
45 -(((
46 -(((
47 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 -)))
49 -)))
50 -
51 -
52 -
53 -== 1.2  Features ==
54 -
55 -* Support LoRaWAN v1.0.4 protocol
56 -* Support peer-to-peer protocol
57 -* TCXO crystal to ensure RF performance on low temperature
58 -* SMD Antenna pad and i-pex antenna connector
59 -* Available in different frequency LoRaWAN frequency bands.
60 -* World-wide unique OTAA keys.
61 -* AT Command via UART-TTL interface
62 -* Firmware upgradable via UART interface
63 -* Ultra-long RF range
64 -
65 -== 1.3  Specification ==
66 -
67 -* CPU: 32-bit 48 MHz
68 -* Flash: 256KB
69 -* RAM: 64KB
70 -* Input Power Range: 1.8v ~~ 3.7v
71 -* Power Consumption: < 4uA.
72 -* Frequency Range: 150 MHz ~~ 960 MHz
73 -* Maximum Power +22 dBm constant RF output
74 -* High sensitivity: -148 dBm
75 -* Temperature:
76 -** Storage: -55 ~~ +125℃
77 -** Operating: -40 ~~ +85℃
78 -* Humidity:
79 -** Storage: 5 ~~ 95% (Non-Condensing)
80 -** Operating: 10 ~~ 95% (Non-Condensing)
81 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
82 -* LoRa Rx current: <9 mA
83 -* I/O Voltage: 3.3v
84 -
85 -== 1.4  AT Command ==
86 -
87 -
88 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
89 -
90 -
91 -
92 -== 1.5  Dimension ==
93 -
94 -[[image:image-20220718094750-3.png]]
95 -
96 -
97 -
98 -== 1.6  Pin Mapping ==
99 -
100 -[[image:image-20220720111850-1.png]]
101 -
102 -
103 -
104 -== 1.7  Land Pattern ==
105 -
106 -[[image:image-20220517072821-2.png]]
107 -
108 -
109 -
110 -= 2.  LA66 LoRaWAN Shield =
111 -
112 -
113 -== 2.1  Overview ==
114 -
115 -
116 -(((
117 117  [[image:image-20220715000826-2.png||height="145" width="220"]]
118 118  )))
119 119  
... ... @@ -151,10 +151,11 @@
151 151  
152 152  
153 153  
154 -== 2.2  Features ==
54 +== 1.2  Features ==
155 155  
56 +
156 156  * Arduino Shield base on LA66 LoRaWAN module
157 -* Support LoRaWAN v1.0.4 protocol
58 +* Support LoRaWAN v1.0.3 protocol
158 158  * Support peer-to-peer protocol
159 159  * TCXO crystal to ensure RF performance on low temperature
160 160  * SMA connector
... ... @@ -164,8 +164,11 @@
164 164  * Firmware upgradable via UART interface
165 165  * Ultra-long RF range
166 166  
167 -== 2.3  Specification ==
168 168  
69 +
70 +== 1.3  Specification ==
71 +
72 +
169 169  * CPU: 32-bit 48 MHz
170 170  * Flash: 256KB
171 171  * RAM: 64KB
... ... @@ -184,18 +184,27 @@
184 184  * LoRa Rx current: <9 mA
185 185  * I/O Voltage: 3.3v
186 186  
187 -== 2.4  LED ==
188 188  
189 189  
93 +== 1.4  Pin Mapping & LED ==
94 +
95 +
96 +[[image:image-20220817085048-1.png||height="533" width="734"]]
97 +
98 +
99 +
190 190  ~1. The LED lights up red when there is an upstream data packet
191 191  2. When the network is successfully connected, the green light will be on for 5 seconds
192 192  3. Purple light on when receiving downlink data packets
193 193  
194 194  
105 +[[image:image-20220820112305-1.png||height="515" width="749"]]
195 195  
196 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
197 197  
198 198  
109 +== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
110 +
111 +
199 199  **Show connection diagram：**
200 200  
201 201  
... ... @@ -213,16 +213,19 @@
213 213  (% style="color:blue" %)**2.  Open project**
214 214  
215 215  
216 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
129 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
217 217  
218 218  [[image:image-20220726135239-1.png]]
219 219  
220 220  
134 +
221 221  (% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
222 222  
137 +
223 223  [[image:image-20220726135356-2.png]]
224 224  
225 225  
141 +
226 226  (% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
227 227  
228 228  
... ... @@ -230,13 +230,13 @@
230 230  
231 231  
232 232  
233 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
149 +== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
234 234  
235 235  
236 236  (% style="color:blue" %)**1.  Open project**
237 237  
238 238  
239 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
155 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
240 240  
241 241  
242 242  [[image:image-20220723172502-8.png]]
... ... @@ -243,7 +243,7 @@
243 243  
244 244  
245 245  
246 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
162 +(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
247 247  
248 248  
249 249  [[image:image-20220723172938-9.png||height="652" width="1050"]]
... ... @@ -250,13 +250,13 @@
250 250  
251 251  
252 252  
253 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
169 +== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
254 254  
255 255  
256 256  (% style="color:blue" %)**1.  Open project**
257 257  
258 258  
259 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
175 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0>>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
260 260  
261 261  
262 262  [[image:image-20220723173341-10.png||height="581" width="1014"]]
... ... @@ -270,460 +270,259 @@
270 270  
271 271  
272 272  
273 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
274 274  
275 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
276 276  
277 -[[image:image-20220723175700-12.png||height="602" width="995"]]
191 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
278 278  
279 279  
194 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
280 280  
281 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
282 282  
197 +[[image:image-20220723175700-12.png||height="602" width="995"]]
283 283  
284 -=== 2.8.1  Items needed for update ===
285 285  
286 286  
287 -1. LA66 LoRaWAN Shield
288 -1. Arduino
289 -1. USB TO TTL Adapter
201 +== 1.8  Example: How to join helium ==
290 290  
291 -[[image:image-20220602100052-2.png||height="385" width="600"]]
292 292  
204 +(% style="color:blue" %)**1.  Create a new device.**
293 293  
294 -=== 2.8.2  Connection ===
295 295  
207 +[[image:image-20220907165500-1.png||height="464" width="940"]]
296 296  
297 -[[image:image-20220602101311-3.png||height="276" width="600"]]
298 298  
299 299  
300 -(((
301 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
302 -)))
211 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
303 303  
304 -(((
305 -(% style="background-color:yellow" %)**GND  <-> GND
306 -TXD  <->  TXD
307 -RXD  <->  RXD**
308 -)))
309 309  
214 +[[image:image-20220907165837-2.png||height="375" width="809"]]
310 310  
311 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
312 312  
313 -Connect USB TTL Adapter to PC after connecting the wires
314 314  
218 +(% style="color:blue" %)**3.  Use AT commands.**
315 315  
316 -[[image:image-20220602102240-4.png||height="304" width="600"]]
317 317  
221 +[[image:image-20220602100052-2.png||height="385" width="600"]]
318 318  
319 -=== 2.8.3  Upgrade steps ===
320 320  
321 321  
322 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
225 +(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
323 323  
324 324  
325 -[[image:image-20220602102824-5.png||height="306" width="600"]]
228 +[[image:image-20220907170308-3.png||height="556" width="617"]]
326 326  
327 327  
328 328  
329 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
232 +(% style="color:blue" %)**5.  Network successfully.**
330 330  
331 331  
332 -[[image:image-20220602104701-12.png||height="285" width="600"]]
235 +[[image:image-20220907170436-4.png]]
333 333  
334 334  
335 335  
336 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
239 +(% style="color:blue" %)**6.  Send uplink using command**
337 337  
338 338  
339 -(((
340 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
341 -)))
242 +[[image:image-20220912084334-1.png]]
342 342  
343 343  
344 -[[image:image-20220602103227-6.png]]
245 +[[image:image-20220912084412-3.png]]
345 345  
346 346  
347 -[[image:image-20220602103357-7.png]]
348 348  
249 +[[image:image-20220907170744-6.png||height="242" width="798"]]
349 349  
350 350  
351 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
352 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
353 353  
253 +== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
354 354  
355 -[[image:image-20220602103844-8.png]]
356 356  
256 +=== 1.9.1  Items needed for update ===
357 357  
358 358  
359 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
360 -(% style="color:blue" %)**3. Select the bin file to burn**
259 +1. LA66 LoRaWAN Shield
260 +1. Arduino
261 +1. USB TO TTL Adapter
361 361  
263 +[[image:image-20220602100052-2.png||height="385" width="600"]]
362 362  
363 -[[image:image-20220602104144-9.png]]
364 364  
365 365  
366 -[[image:image-20220602104251-10.png]]
267 +=== 1.9.2  Connection ===
367 367  
368 368  
369 -[[image:image-20220602104402-11.png]]
270 +[[image:image-20220602101311-3.png||height="276" width="600"]]
370 370  
371 371  
372 -
373 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
374 -(% style="color:blue" %)**4. Click to start the download**
375 -
376 -[[image:image-20220602104923-13.png]]
377 -
378 -
379 -
380 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
381 -(% style="color:blue" %)**5. Check update process**
382 -
383 -
384 -[[image:image-20220602104948-14.png]]
385 -
386 -
387 -
388 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
389 -(% style="color:blue" %)**The following picture shows that the burning is successful**
390 -
391 -[[image:image-20220602105251-15.png]]
392 -
393 -
394 -
395 -= 3.  LA66 USB LoRaWAN Adapter =
396 -
397 -
398 -== 3.1  Overview ==
399 -
400 -
401 -[[image:image-20220715001142-3.png||height="145" width="220"]]
402 -
403 -
404 404  (((
405 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
274 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
406 406  )))
407 407  
408 408  (((
409 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
278 +(% style="background-color:yellow" %)**GND  <-> GND
279 +TXD  <->  TXD
280 +RXD  <->  RXD**
410 410  )))
411 411  
412 -(((
413 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
414 -)))
415 415  
416 -(((
417 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
418 -)))
284 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
419 419  
420 -(((
421 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
422 -)))
286 +Connect USB TTL Adapter to PC after connecting the wires
423 423  
424 424  
289 +[[image:image-20220602102240-4.png||height="304" width="600"]]
425 425  
426 -== 3.2  Features ==
427 427  
428 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
429 -* Ultra-long RF range
430 -* Support LoRaWAN v1.0.4 protocol
431 -* Support peer-to-peer protocol
432 -* TCXO crystal to ensure RF performance on low temperature
433 -* Spring RF antenna
434 -* Available in different frequency LoRaWAN frequency bands.
435 -* World-wide unique OTAA keys.
436 -* AT Command via UART-TTL interface
437 -* Firmware upgradable via UART interface
438 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
439 439  
440 -== 3.3  Specification ==
293 +=== 1.9.3  Upgrade steps ===
441 441  
442 -* CPU: 32-bit 48 MHz
443 -* Flash: 256KB
444 -* RAM: 64KB
445 -* Input Power Range: 5v
446 -* Frequency Range: 150 MHz ~~ 960 MHz
447 -* Maximum Power +22 dBm constant RF output
448 -* High sensitivity: -148 dBm
449 -* Temperature:
450 -** Storage: -55 ~~ +125℃
451 -** Operating: -40 ~~ +85℃
452 -* Humidity:
453 -** Storage: 5 ~~ 95% (Non-Condensing)
454 -** Operating: 10 ~~ 95% (Non-Condensing)
455 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
456 -* LoRa Rx current: <9 mA
457 457  
458 -== 3.4  Pin Mapping & LED ==
459 459  
297 +==== (% style="color:blue" %)**1.  Switch SW1 to put in ISP position**(%%) ====
460 460  
461 461  
462 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
300 +[[image:image-20220602102824-5.png||height="306" width="600"]]
463 463  
464 464  
465 -(((
466 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
467 -)))
468 468  
469 469  
470 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
305 +==== (% style="color:blue" %)**2.  Press the RST switch once**(%%) ====
471 471  
472 472  
473 -[[image:image-20220723100027-1.png]]
308 +[[image:image-20220817085447-1.png]]
474 474  
475 475  
476 -Open the serial port tool
477 477  
478 -[[image:image-20220602161617-8.png]]
479 479  
480 -[[image:image-20220602161718-9.png||height="457" width="800"]]
313 +==== (% style="color:blue" %)**3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**(%%) ====
481 481  
482 482  
483 483  
484 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
317 +(((
318 +(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
319 +)))
485 485  
486 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
487 487  
322 +[[image:image-20220602103227-6.png]]
488 488  
489 -[[image:image-20220602161935-10.png||height="498" width="800"]]
490 490  
325 +[[image:image-20220602103357-7.png]]
491 491  
492 492  
493 -(% style="color:blue" %)**3. See Uplink Command**
494 494  
495 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
329 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
330 +(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
496 496  
497 -example: AT+SENDB=01,02,8,05820802581ea0a5
498 498  
499 -[[image:image-20220602162157-11.png||height="497" width="800"]]
333 +[[image:image-20220602103844-8.png]]
500 500  
501 501  
502 502  
503 -(% style="color:blue" %)**4. Check to see if TTN received the message**
337 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
338 +(% style="color:blue" %)**3.  Select the bin file to burn**
504 504  
505 -[[image:image-20220602162331-12.png||height="420" width="800"]]
506 506  
341 +[[image:image-20220602104144-9.png]]
507 507  
508 508  
509 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
344 +[[image:image-20220602104251-10.png]]
510 510  
511 511  
512 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
347 +[[image:image-20220602104402-11.png]]
513 513  
514 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
515 515  
516 -(% style="color:red" %)**Preconditions:**
517 517  
518 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
351 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
352 +(% style="color:blue" %)**4.  Click to start the download**
519 519  
520 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
521 521  
355 +[[image:image-20220602104923-13.png]]
522 522  
523 523  
524 -(% style="color:blue" %)**Steps for usage:**
525 525  
526 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
359 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
360 +(% style="color:blue" %)**5.  Check update process**
527 527  
528 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
529 529  
530 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
363 +[[image:image-20220602104948-14.png]]
531 531  
532 532  
533 533  
534 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
367 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
368 +(% style="color:blue" %)**The following picture shows that the burning is successful**
535 535  
536 536  
537 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
371 +[[image:image-20220602105251-15.png]]
538 538  
539 539  
540 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
541 541  
542 -[[image:image-20220723100439-2.png]]
375 += 2.  FAQ =
543 543  
544 544  
378 +== 2.1  How to Compile Source Code for LA66? ==
545 545  
546 -(% style="color:blue" %)**2. Install Minicom in RPi.**
547 547  
548 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
381 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
549 549  
550 - (% style="background-color:yellow" %)**apt update**
551 551  
552 - (% style="background-color:yellow" %)**apt install minicom**
553 553  
385 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
554 554  
555 -Use minicom to connect to the RPI's terminal
556 556  
557 -[[image:image-20220602153146-3.png||height="439" width="500"]]
388 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:.Instruction for LA66 Peer to Peer firmware.WebHome]]
558 558  
559 559  
560 560  
561 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
392 += 3.  Order Info =
562 562  
563 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
564 564  
395 +**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
565 565  
566 -[[image:image-20220602154928-5.png||height="436" width="500"]]
567 567  
398 +(% style="color:blue" %)**XXX**(%%): The default frequency band
568 568  
400 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
401 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
402 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
403 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
404 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
405 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
406 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
407 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
408 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
569 569  
570 -(% style="color:blue" %)**4. Send Uplink message**
571 571  
572 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
573 573  
574 -example: AT+SENDB=01,02,8,05820802581ea0a5
412 += 4.  Reference =
575 575  
576 576  
577 -[[image:image-20220602160339-6.png||height="517" width="600"]]
415 +* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
578 578  
579 579  
580 580  
581 -Check to see if TTN received the message
419 += 5.  FCC Statement =
582 582  
583 -[[image:image-20220602160627-7.png||height="369" width="800"]]
584 584  
422 +(% style="color:red" %)**FCC Caution:**
585 585  
424 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
586 586  
587 -== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
426 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
588 588  
589 589  
590 -=== 3.8.1  DRAGINO-LA66-APP ===
429 +(% style="color:red" %)**IMPORTANT NOTE: **
591 591  
431 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
592 592  
593 -[[image:image-20220723102027-3.png]]
433 +—Reorient or relocate the receiving antenna.
594 594  
435 +—Increase the separation between the equipment and receiver.
595 595  
437 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
596 596  
597 -==== (% style="color:blue" %)**Overview：**(%%) ====
439 +—Consult the dealer or an experienced radio/TV technician for help.
598 598  
599 599  
600 -(((
601 -DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
602 -)))
442 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
603 603  
604 -(((
605 -View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
606 -)))
607 -
608 -
609 -
610 -==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
611 -
612 -
613 -Requires a type-c to USB adapter
614 -
615 -[[image:image-20220723104754-4.png]]
616 -
617 -
618 -
619 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
620 -
621 -
622 -Function and page introduction
623 -
624 -[[image:image-20220723113448-7.png||height="1481" width="670"]]
625 -
626 -
627 -1.Display LA66 USB LoRaWAN Module connection status
628 -
629 -2.Check and reconnect
630 -
631 -3.Turn send timestamps on or off
632 -
633 -4.Display LoRaWan connection status
634 -
635 -5.Check LoRaWan connection status
636 -
637 -6.The RSSI value of the node when the ACK is received
638 -
639 -7.Node's Signal Strength Icon
640 -
641 -8.Set the packet sending interval of the node in seconds
642 -
643 -9.AT command input box
644 -
645 -10.Send AT command button
646 -
647 -11.Node log box
648 -
649 -12.clear log button
650 -
651 -13.exit button
652 -
653 -
654 -LA66 USB LoRaWAN Module not connected
655 -
656 -[[image:image-20220723110520-5.png||height="903" width="677"]]
657 -
658 -
659 -
660 -Connect LA66 USB LoRaWAN Module
661 -
662 -[[image:image-20220723110626-6.png||height="906" width="680"]]
663 -
664 -
665 -
666 -=== 3.8.2  Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
667 -
668 -
669 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
670 -
671 -[[image:image-20220723134549-8.png]]
672 -
673 -
674 -
675 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
676 -
677 -Sample JSON file please go to this link to download：放置JSON文件的链接
678 -
679 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
680 -
681 -The following is the positioning effect map
682 -
683 -[[image:image-20220723144339-1.png]]
684 -
685 -
686 -
687 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
688 -
689 -
690 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
691 -
692 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
693 -
694 -[[image:image-20220723150132-2.png]]
695 -
696 -
697 -
698 -= 4.  FAQ =
699 -
700 -
701 -== 4.1  How to Compile Source Code for LA66? ==
702 -
703 -
704 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Compile and Upload Code to ASR6601 Platform]]
705 -
706 -
707 -
708 -= 5.  Order Info =
709 -
710 -
711 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
712 -
713 -
714 -(% style="color:blue" %)**XXX**(%%): The default frequency band
715 -
716 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
717 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
718 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
719 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
720 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
721 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
722 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
723 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
724 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
725 -
726 -= 6.  Reference =
727 -
728 -
729 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
444 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0