Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 137.2 >
edited by Xiaoling
on 2022/07/29 08:57
To version < 73.1 >
edited by Edwin Chen
on 2022/07/03 00:12
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,57 +1,24 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 -
11 -
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 -
14 -
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 25  (% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 -)))
27 -)))
28 28  
29 -(((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 -)))
33 -)))
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
34 34  
35 -(((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 -)))
39 39  
40 -(((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 -)))
43 -)))
44 44  
45 -(((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 -)))
49 -)))
50 50  
51 51  
20 +== Features ==
52 52  
53 -== 1.2  Features ==
54 -
55 55  * Support LoRaWAN v1.0.4 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
... ... @@ -62,9 +62,8 @@
62 62  * Firmware upgradable via UART interface
63 63  * Ultra-long RF range
64 64  
32 +== Specification ==
65 65  
66 -== 1.3  Specification ==
67 -
68 68  * CPU: 32-bit 48 MHz
69 69  * Flash: 256KB
70 70  * RAM: 64KB
... ... @@ -83,78 +83,50 @@
83 83  * LoRa Rx current: <9 mA
84 84  * I/O Voltage: 3.3v
85 85  
52 +== AT Command ==
86 86  
87 -== 1.4  AT Command ==
88 -
89 -
90 90  AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
91 91  
92 92  
57 +== Dimension ==
93 93  
94 -== 1.5  Dimension ==
59 +[[image:image-20220517072526-1.png]]
95 95  
96 -[[image:image-20220718094750-3.png]]
97 97  
62 +== Pin Mapping ==
98 98  
64 +[[image:image-20220523101537-1.png]]
99 99  
100 -== 1.6  Pin Mapping ==
66 +== Land Pattern ==
101 101  
102 -[[image:image-20220720111850-1.png]]
103 -
104 -
105 -
106 -== 1.7  Land Pattern ==
107 -
108 108  [[image:image-20220517072821-2.png]]
109 109  
110 110  
71 +== Order Info ==
111 111  
112 -= 2.  LA66 LoRaWAN Shield =
73 +Part Number: **LA66-XXX**
113 113  
75 +**XX**: The default frequency band
114 114  
115 -== 2.1  Overview ==
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
116 116  
87 += LA66 LoRaWAN Shield =
117 117  
118 -(((
119 -[[image:image-20220715000826-2.png||height="145" width="220"]]
120 -)))
89 +== Overview ==
121 121  
122 -(((
123 -
124 -)))
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
125 125  
126 -(((
127 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
128 -)))
129 129  
130 -(((
131 -(((
132 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
133 -)))
134 -)))
94 +== Features ==
135 135  
136 -(((
137 -(((
138 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
139 -)))
140 -)))
141 -
142 -(((
143 -(((
144 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
145 -)))
146 -)))
147 -
148 -(((
149 -(((
150 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
151 -)))
152 -)))
153 -
154 -
155 -
156 -== 2.2  Features ==
157 -
158 158  * Arduino Shield base on LA66 LoRaWAN module
159 159  * Support LoRaWAN v1.0.4 protocol
160 160  * Support peer-to-peer protocol
... ... @@ -166,9 +166,8 @@
166 166  * Firmware upgradable via UART interface
167 167  * Ultra-long RF range
168 168  
107 +== Specification ==
169 169  
170 -== 2.3  Specification ==
171 -
172 172  * CPU: 32-bit 48 MHz
173 173  * Flash: 256KB
174 174  * RAM: 64KB
... ... @@ -187,248 +187,120 @@
187 187  * LoRa Rx current: <9 mA
188 188  * I/O Voltage: 3.3v
189 189  
127 +== Pin Mapping & LED ==
190 190  
191 -== 2.4  LED ==
129 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
192 192  
131 +== Example: Join TTN network and send an uplink message, get downlink message. ==
193 193  
194 -~1. The LED lights up red when there is an upstream data packet
195 -2. When the network is successfully connected, the green light will be on for 5 seconds
196 -3. Purple light on when receiving downlink data packets
133 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
197 197  
135 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
198 198  
137 +=== what needs to be used ===
199 199  
200 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
139 +1.LA66 LoRaWAN Shield that needs to be upgraded
201 201  
141 +2.Arduino
202 202  
203 -**Show connection diagram：**
143 +3.USB TO TTL
204 204  
145 +[[image:image-20220602100052-2.png]]
205 205  
206 -[[image:image-20220723170210-2.png||height="908" width="681"]]
147 +=== Wiring Schematic ===
207 207  
149 +[[image:image-20220602101311-3.png]]
208 208  
151 +LA66 LoRaWAN Shield  >>>>>>>>>>>>USB TTL
209 209  
210 -(% style="color:blue" %)**1.  open Arduino IDE**
153 +GND  >>>>>>>>>>>>GND
211 211  
155 +TXD  >>>>>>>>>>>>TXD
212 212  
213 -[[image:image-20220723170545-4.png]]
157 +RXD  >>>>>>>>>>>>RXD
214 214  
159 +JP6 of LA66 LoRaWAN Shield needs to be connected with yellow jumper cap
215 215  
161 +Connect to the PC after connecting the wires
216 216  
217 -(% style="color:blue" %)**2.  Open project**
163 +[[image:image-20220602102240-4.png]]
218 218  
165 +=== Upgrade steps ===
219 219  
220 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
167 +==== Dial the SW1 of the LA66 LoRaWAN Shield to the ISP's location as shown in the figure below ====
221 221  
222 -[[image:image-20220726135239-1.png]]
169 +[[image:image-20220602102824-5.png]]
223 223  
171 +==== Press the RST switch on the LA66 LoRaWAN Shield once ====
224 224  
225 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
173 +[[image:image-20220602104701-12.png]]
226 226  
227 -[[image:image-20220726135356-2.png]]
175 +==== Open the upgrade application software ====
228 228  
177 +Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
229 229  
230 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
231 -
232 -
233 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
234 -
235 -
236 -
237 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
238 -
239 -
240 -(% style="color:blue" %)**1.  Open project**
241 -
242 -
243 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
244 -
245 -
246 -[[image:image-20220723172502-8.png]]
247 -
248 -
249 -
250 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
251 -
252 -
253 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
254 -
255 -
256 -
257 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
258 -
259 -
260 -(% style="color:blue" %)**1.  Open project**
261 -
262 -
263 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
264 -
265 -
266 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
267 -
268 -
269 -
270 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
271 -
272 -
273 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
274 -
275 -
276 -
277 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
278 -
279 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
280 -
281 -[[image:image-20220723175700-12.png||height="602" width="995"]]
282 -
283 -
284 -
285 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
286 -
287 -
288 -=== 2.8.1  Items needed for update ===
289 -
290 -
291 -1. LA66 LoRaWAN Shield
292 -1. Arduino
293 -1. USB TO TTL Adapter
294 -
295 -[[image:image-20220602100052-2.png||height="385" width="600"]]
296 -
297 -
298 -=== 2.8.2  Connection ===
299 -
300 -
301 -[[image:image-20220602101311-3.png||height="276" width="600"]]
302 -
303 -
304 -(((
305 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
306 -)))
307 -
308 -(((
309 -(% style="background-color:yellow" %)**GND  <-> GND
310 -TXD  <->  TXD
311 -RXD  <->  RXD**
312 -)))
313 -
314 -
315 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
316 -
317 -Connect USB TTL Adapter to PC after connecting the wires
318 -
319 -
320 -[[image:image-20220602102240-4.png||height="304" width="600"]]
321 -
322 -
323 -=== 2.8.3  Upgrade steps ===
324 -
325 -
326 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
327 -
328 -
329 -[[image:image-20220602102824-5.png||height="306" width="600"]]
330 -
331 -
332 -
333 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
334 -
335 -
336 -[[image:image-20220602104701-12.png||height="285" width="600"]]
337 -
338 -
339 -
340 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
341 -
342 -
343 -(((
344 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
345 -)))
346 -
347 -
348 348  [[image:image-20220602103227-6.png]]
349 349  
350 -
351 351  [[image:image-20220602103357-7.png]]
352 352  
183 +===== Select the COM port corresponding to USB TTL =====
353 353  
354 -
355 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
356 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
357 -
358 -
359 359  [[image:image-20220602103844-8.png]]
360 360  
187 +===== Select the bin file to burn =====
361 361  
362 -
363 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
364 -(% style="color:blue" %)**3. Select the bin file to burn**
365 -
366 -
367 367  [[image:image-20220602104144-9.png]]
368 368  
369 -
370 370  [[image:image-20220602104251-10.png]]
371 371  
372 -
373 373  [[image:image-20220602104402-11.png]]
374 374  
195 +===== Click to start the download =====
375 375  
376 -
377 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
378 -(% style="color:blue" %)**4. Click to start the download**
379 -
380 380  [[image:image-20220602104923-13.png]]
381 381  
199 +===== The following figure appears to prove that the burning is in progress =====
382 382  
383 -
384 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
385 -(% style="color:blue" %)**5. Check update process**
386 -
387 -
388 388  [[image:image-20220602104948-14.png]]
389 389  
203 +===== The following picture appears to prove that the burning is successful =====
390 390  
391 -
392 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
393 -(% style="color:blue" %)**The following picture shows that the burning is successful**
394 -
395 395  [[image:image-20220602105251-15.png]]
396 396  
397 397  
208 +== Order Info ==
398 398  
399 -= 3.  LA66 USB LoRaWAN Adapter =
210 +Part Number: **LA66-LoRaWAN-Shield-XXX**
400 400  
212 +**XX**: The default frequency band
401 401  
402 -== 3.1  Overview ==
214 +* **AS923**: LoRaWAN AS923 band
215 +* **AU915**: LoRaWAN AU915 band
216 +* **EU433**: LoRaWAN EU433 band
217 +* **EU868**: LoRaWAN EU868 band
218 +* **KR920**: LoRaWAN KR920 band
219 +* **US915**: LoRaWAN US915 band
220 +* **IN865**: LoRaWAN IN865 band
221 +* **CN470**: LoRaWAN CN470 band
222 +* **PP**: Peer to Peer LoRa Protocol
403 403  
224 +== Package Info ==
404 404  
405 -[[image:image-20220715001142-3.png||height="145" width="220"]]
226 +* LA66 LoRaWAN Shield x 1
227 +* RF Antenna x 1
406 406  
407 407  
408 -(((
409 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
410 -)))
411 411  
412 -(((
413 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
414 -)))
415 415  
416 -(((
417 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
418 -)))
232 += LA66 USB LoRaWAN Adapter =
419 419  
420 -(((
421 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
422 -)))
234 +== Overview ==
423 423  
424 -(((
425 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
426 -)))
236 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
427 427  
428 428  
239 +== Features ==
429 429  
430 -== 3.2  Features ==
431 -
432 432  * LoRaWAN USB adapter base on LA66 LoRaWAN module
433 433  * Ultra-long RF range
434 434  * Support LoRaWAN v1.0.4 protocol
... ... @@ -439,10 +439,11 @@
439 439  * World-wide unique OTAA keys.
440 440  * AT Command via UART-TTL interface
441 441  * Firmware upgradable via UART interface
442 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
443 443  
444 -== 3.3  Specification ==
445 445  
253 +
254 +== Specification ==
255 +
446 446  * CPU: 32-bit 48 MHz
447 447  * Flash: 256KB
448 448  * RAM: 64KB
... ... @@ -459,277 +459,120 @@
459 459  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
460 460  * LoRa Rx current: <9 mA
461 461  
462 -== 3.4  Pin Mapping & LED ==
463 463  
464 464  
274 +== Pin Mapping & LED ==
465 465  
466 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
276 +== Example Send & Get Messages via LoRaWAN in PC ==
467 467  
278 +Connect the LA66 LoRa Shield to the PC
468 468  
469 -(((
470 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
471 -)))
280 +[[image:image-20220602171217-1.png||height="615" width="915"]]
472 472  
473 -
474 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
475 -
476 -
477 -[[image:image-20220723100027-1.png]]
478 -
479 -
480 480  Open the serial port tool
481 481  
482 482  [[image:image-20220602161617-8.png]]
483 483  
484 -[[image:image-20220602161718-9.png||height="457" width="800"]]
286 +[[image:image-20220602161718-9.png||height="529" width="927"]]
485 485  
288 +Press the reset switch RST on the LA66 LoRa Shield.
486 486  
290 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
487 487  
488 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
292 +[[image:image-20220602161935-10.png]]
489 489  
490 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
294 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
491 491  
492 -
493 -[[image:image-20220602161935-10.png||height="498" width="800"]]
494 -
495 -
496 -
497 -(% style="color:blue" %)**3. See Uplink Command**
498 -
499 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
500 -
501 501  example: AT+SENDB=01,02,8,05820802581ea0a5
502 502  
503 -[[image:image-20220602162157-11.png||height="497" width="800"]]
298 +[[image:image-20220602162157-11.png]]
504 504  
300 +Check to see if TTN received the message
505 505  
302 +[[image:image-20220602162331-12.png||height="547" width="1044"]]
506 506  
507 -(% style="color:blue" %)**4. Check to see if TTN received the message**
304 +== Example Send & Get Messages via LoRaWAN in RPi ==
508 508  
509 -[[image:image-20220602162331-12.png||height="420" width="800"]]
306 +Connect the LA66 LoRa Shield to the RPI
510 510  
308 +[[image:image-20220602171233-2.png||height="592" width="881"]]
511 511  
310 +Log in to the RPI's terminal and connect to the serial port
512 512  
513 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
312 +[[image:image-20220602153146-3.png]]
514 514  
314 +Press the reset switch RST on the LA66 LoRa Shield.
315 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
515 515  
516 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
317 +[[image:image-20220602154928-5.png]]
517 517  
518 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
319 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
519 519  
520 -(% style="color:red" %)**Preconditions:**
521 -
522 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
523 -
524 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
525 -
526 -
527 -
528 -(% style="color:blue" %)**Steps for usage:**
529 -
530 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
531 -
532 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
533 -
534 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
535 -
536 -
537 -
538 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
539 -
540 -
541 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
542 -
543 -
544 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
545 -
546 -[[image:image-20220723100439-2.png]]
547 -
548 -
549 -
550 -(% style="color:blue" %)**2. Install Minicom in RPi.**
551 -
552 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
553 -
554 - (% style="background-color:yellow" %)**apt update**
555 -
556 - (% style="background-color:yellow" %)**apt install minicom**
557 -
558 -
559 -Use minicom to connect to the RPI's terminal
560 -
561 -[[image:image-20220602153146-3.png||height="439" width="500"]]
562 -
563 -
564 -
565 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
566 -
567 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
568 -
569 -
570 -[[image:image-20220602154928-5.png||height="436" width="500"]]
571 -
572 -
573 -
574 -(% style="color:blue" %)**4. Send Uplink message**
575 -
576 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
577 -
578 578  example: AT+SENDB=01,02,8,05820802581ea0a5
579 579  
323 +[[image:image-20220602160339-6.png]]
580 580  
581 -[[image:image-20220602160339-6.png||height="517" width="600"]]
582 -
583 -
584 -
585 585  Check to see if TTN received the message
586 586  
587 -[[image:image-20220602160627-7.png||height="369" width="800"]]
327 +[[image:image-20220602160627-7.png||height="468" width="1013"]]
588 588  
329 +=== Install Minicom ===
589 589  
331 +Enter the following command in the RPI terminal
590 590  
591 -== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
333 +apt update
592 592  
335 +[[image:image-20220602143155-1.png]]
593 593  
594 -=== 3.8.1  DRAGINO-LA66-APP ===
337 +apt install minicom
595 595  
339 +[[image:image-20220602143744-2.png]]
596 596  
597 -[[image:image-20220723102027-3.png]]
341 +=== Send PC's CPU/RAM usage to TTN via script. ===
598 598  
343 +==== Take python as an example： ====
599 599  
345 +===== Preconditions: =====
600 600  
601 -==== (% style="color:blue" %)**Overview：**(%%) ====
347 +1.LA66 USB LoRaWAN Adapter works fine
602 602  
349 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
603 603  
604 -(((
605 -DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
606 -)))
351 +===== Steps for usage =====
607 607  
608 -(((
609 -View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
610 -)))
353 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
611 611  
355 +2.Run the script and see the TTN
612 612  
357 +[[image:image-20220602115852-3.png]]
613 613  
614 -==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
615 615  
616 616  
617 -Requires a type-c to USB adapter
361 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
618 618  
619 -[[image:image-20220723104754-4.png]]
620 620  
364 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
621 621  
622 622  
623 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
624 624  
368 +== Order Info ==
625 625  
626 -Function and page introduction
370 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
627 627  
628 -[[image:image-20220723113448-7.png||height="1481" width="670"]]
372 +**XX**: The default frequency band
629 629  
374 +* **AS923**: LoRaWAN AS923 band
375 +* **AU915**: LoRaWAN AU915 band
376 +* **EU433**: LoRaWAN EU433 band
377 +* **EU868**: LoRaWAN EU868 band
378 +* **KR920**: LoRaWAN KR920 band
379 +* **US915**: LoRaWAN US915 band
380 +* **IN865**: LoRaWAN IN865 band
381 +* **CN470**: LoRaWAN CN470 band
382 +* **PP**: Peer to Peer LoRa Protocol
630 630  
631 -1.Display LA66 USB LoRaWAN Module connection status
384 +== Package Info ==
632 632  
633 -2.Check and reconnect
386 +* LA66 USB LoRaWAN Adapter x 1
634 634  
635 -3.Turn send timestamps on or off
636 -
637 -4.Display LoRaWan connection status
638 -
639 -5.Check LoRaWan connection status
640 -
641 -6.The RSSI value of the node when the ACK is received
642 -
643 -7.Node's Signal Strength Icon
644 -
645 -8.Set the packet sending interval of the node in seconds
646 -
647 -9.AT command input box
648 -
649 -10.Send AT command button
650 -
651 -11.Node log box
652 -
653 -12.clear log button
654 -
655 -13.exit button
656 -
657 -
658 -LA66 USB LoRaWAN Module not connected
659 -
660 -[[image:image-20220723110520-5.png||height="903" width="677"]]
661 -
662 -
663 -
664 -Connect LA66 USB LoRaWAN Module
665 -
666 -[[image:image-20220723110626-6.png||height="906" width="680"]]
667 -
668 -
669 -
670 -=== 3.8.2  Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
671 -
672 -
673 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
674 -
675 -[[image:image-20220723134549-8.png]]
676 -
677 -
678 -
679 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
680 -
681 -Sample JSON file please go to this link to download：放置JSON文件的链接
682 -
683 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
684 -
685 -The following is the positioning effect map
686 -
687 -[[image:image-20220723144339-1.png]]
688 -
689 -
690 -
691 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
692 -
693 -
694 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
695 -
696 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
697 -
698 -[[image:image-20220723150132-2.png]]
699 -
700 -
701 -
702 -= 4.  FAQ =
703 -
704 -
705 -== 4.1  How to Compile Source Code for LA66? ==
706 -
707 -
708 -Compile and Upload Code to ASR6601 Platform ：
709 -
710 -
711 -
712 -= 5.  Order Info =
713 -
714 -
715 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
716 -
717 -
718 -(% style="color:blue" %)**XXX**(%%): The default frequency band
719 -
720 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
721 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
722 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
723 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
724 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
725 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
726 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
727 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
728 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
729 -
730 -
731 -
732 -= 6.  Reference =
733 -
734 -
735 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
388 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0