Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 137.2 >
edited by Xiaoling
on 2022/07/29 08:57
To version < 69.1 >
edited by Edwin Chen
on 2022/07/02 23:51
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,57 +1,24 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 -
11 -
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 -
14 -
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 25  (% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 -)))
27 -)))
28 28  
29 -(((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 -)))
33 -)))
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
34 34  
35 -(((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 -)))
39 39  
40 -(((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 -)))
43 -)))
44 44  
45 -(((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 -)))
49 -)))
50 50  
51 51  
20 +== Features ==
52 52  
53 -== 1.2  Features ==
54 -
55 55  * Support LoRaWAN v1.0.4 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
... ... @@ -63,7 +63,7 @@
63 63  * Ultra-long RF range
64 64  
65 65  
66 -== 1.3  Specification ==
33 +== Specification ==
67 67  
68 68  * CPU: 32-bit 48 MHz
69 69  * Flash: 256KB
... ... @@ -83,653 +83,221 @@
83 83  * LoRa Rx current: <9 mA
84 84  * I/O Voltage: 3.3v
85 85  
53 +== AT Command ==
86 86  
87 -== 1.4  AT Command ==
88 -
89 -
90 90  AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
91 91  
92 92  
58 +== Dimension ==
93 93  
94 -== 1.5  Dimension ==
60 +[[image:image-20220517072526-1.png]]
95 95  
96 -[[image:image-20220718094750-3.png]]
97 97  
63 +== Pin Mapping ==
98 98  
65 +[[image:image-20220523101537-1.png]]
99 99  
100 -== 1.6  Pin Mapping ==
67 +== Land Pattern ==
101 101  
102 -[[image:image-20220720111850-1.png]]
103 -
104 -
105 -
106 -== 1.7  Land Pattern ==
107 -
108 108  [[image:image-20220517072821-2.png]]
109 109  
110 110  
72 +== Part Number ==
111 111  
112 -= 2.  LA66 LoRaWAN Shield =
74 +Part Number: **LA66-XXX**
113 113  
76 +**XX**: The default frequency band
114 114  
115 -== 2.1  Overview ==
78 +* **AS923**: LoRaWAN AS923 band
79 +* **AU915**: LoRaWAN AU915 band
80 +* **EU433**: LoRaWAN EU433 band
81 +* **EU868**: LoRaWAN EU868 band
82 +* **KR920**: LoRaWAN KR920 band
83 +* **US915**: LoRaWAN US915 band
84 +* **IN865**: LoRaWAN IN865 band
85 +* **CN470**: LoRaWAN CN470 band
86 +* **PP**: Peer to Peer LoRa Protocol
116 116  
88 += LA66 LoRaWAN Shield =
117 117  
118 -(((
119 -[[image:image-20220715000826-2.png||height="145" width="220"]]
120 -)))
90 +LA66 LoRaWAN Shield is the Arduino Breakout PCB to fast test the features of LA66 module and turn Arduino to support LoRaWAN.
121 121  
122 -(((
123 -
124 -)))
92 +== Pin Mapping & LED ==
125 125  
126 -(((
127 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
128 -)))
94 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
129 129  
130 -(((
131 -(((
132 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
133 -)))
134 -)))
96 +== Example: Join TTN network and send an uplink message, get downlink message. ==
135 135  
136 -(((
137 -(((
138 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
139 -)))
140 -)))
98 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
141 141  
142 -(((
143 -(((
144 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
145 -)))
146 -)))
100 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
147 147  
148 -(((
149 -(((
150 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
151 -)))
152 -)))
102 +=== what needs to be used ===
153 153  
104 +1.LA66 LoRaWAN Shield that needs to be upgraded
154 154  
106 +2.Arduino
155 155  
156 -== 2.2  Features ==
108 +3.USB TO TTL
157 157  
158 -* Arduino Shield base on LA66 LoRaWAN module
159 -* Support LoRaWAN v1.0.4 protocol
160 -* Support peer-to-peer protocol
161 -* TCXO crystal to ensure RF performance on low temperature
162 -* SMA connector
163 -* Available in different frequency LoRaWAN frequency bands.
164 -* World-wide unique OTAA keys.
165 -* AT Command via UART-TTL interface
166 -* Firmware upgradable via UART interface
167 -* Ultra-long RF range
110 +[[image:image-20220602100052-2.png]]
168 168  
112 +=== Wiring Schematic ===
169 169  
170 -== 2.3  Specification ==
114 +[[image:image-20220602101311-3.png]]
171 171  
172 -* CPU: 32-bit 48 MHz
173 -* Flash: 256KB
174 -* RAM: 64KB
175 -* Input Power Range: 1.8v ~~ 3.7v
176 -* Power Consumption: < 4uA.
177 -* Frequency Range: 150 MHz ~~ 960 MHz
178 -* Maximum Power +22 dBm constant RF output
179 -* High sensitivity: -148 dBm
180 -* Temperature:
181 -** Storage: -55 ~~ +125℃
182 -** Operating: -40 ~~ +85℃
183 -* Humidity:
184 -** Storage: 5 ~~ 95% (Non-Condensing)
185 -** Operating: 10 ~~ 95% (Non-Condensing)
186 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
187 -* LoRa Rx current: <9 mA
188 -* I/O Voltage: 3.3v
116 +LA66 LoRaWAN Shield  >>>>>>>>>>>>USB TTL
189 189  
118 +GND  >>>>>>>>>>>>GND
190 190  
191 -== 2.4  LED ==
120 +TXD  >>>>>>>>>>>>TXD
192 192  
122 +RXD  >>>>>>>>>>>>RXD
193 193  
194 -~1. The LED lights up red when there is an upstream data packet
195 -2. When the network is successfully connected, the green light will be on for 5 seconds
196 -3. Purple light on when receiving downlink data packets
124 +JP6 of LA66 LoRaWAN Shield needs to be connected with yellow jumper cap
197 197  
126 +Connect to the PC after connecting the wires
198 198  
128 +[[image:image-20220602102240-4.png]]
199 199  
200 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
130 +=== Upgrade steps ===
201 201  
132 +==== Dial the SW1 of the LA66 LoRaWAN Shield to the ISP's location as shown in the figure below ====
202 202  
203 -**Show connection diagram：**
134 +[[image:image-20220602102824-5.png]]
204 204  
136 +==== Press the RST switch on the LA66 LoRaWAN Shield once ====
205 205  
206 -[[image:image-20220723170210-2.png||height="908" width="681"]]
138 +[[image:image-20220602104701-12.png]]
207 207  
140 +==== Open the upgrade application software ====
208 208  
142 +Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
209 209  
210 -(% style="color:blue" %)**1.  open Arduino IDE**
211 -
212 -
213 -[[image:image-20220723170545-4.png]]
214 -
215 -
216 -
217 -(% style="color:blue" %)**2.  Open project**
218 -
219 -
220 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
221 -
222 -[[image:image-20220726135239-1.png]]
223 -
224 -
225 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
226 -
227 -[[image:image-20220726135356-2.png]]
228 -
229 -
230 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
231 -
232 -
233 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
234 -
235 -
236 -
237 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
238 -
239 -
240 -(% style="color:blue" %)**1.  Open project**
241 -
242 -
243 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
244 -
245 -
246 -[[image:image-20220723172502-8.png]]
247 -
248 -
249 -
250 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
251 -
252 -
253 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
254 -
255 -
256 -
257 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
258 -
259 -
260 -(% style="color:blue" %)**1.  Open project**
261 -
262 -
263 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
264 -
265 -
266 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
267 -
268 -
269 -
270 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
271 -
272 -
273 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
274 -
275 -
276 -
277 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
278 -
279 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
280 -
281 -[[image:image-20220723175700-12.png||height="602" width="995"]]
282 -
283 -
284 -
285 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
286 -
287 -
288 -=== 2.8.1  Items needed for update ===
289 -
290 -
291 -1. LA66 LoRaWAN Shield
292 -1. Arduino
293 -1. USB TO TTL Adapter
294 -
295 -[[image:image-20220602100052-2.png||height="385" width="600"]]
296 -
297 -
298 -=== 2.8.2  Connection ===
299 -
300 -
301 -[[image:image-20220602101311-3.png||height="276" width="600"]]
302 -
303 -
304 -(((
305 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
306 -)))
307 -
308 -(((
309 -(% style="background-color:yellow" %)**GND  <-> GND
310 -TXD  <->  TXD
311 -RXD  <->  RXD**
312 -)))
313 -
314 -
315 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
316 -
317 -Connect USB TTL Adapter to PC after connecting the wires
318 -
319 -
320 -[[image:image-20220602102240-4.png||height="304" width="600"]]
321 -
322 -
323 -=== 2.8.3  Upgrade steps ===
324 -
325 -
326 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
327 -
328 -
329 -[[image:image-20220602102824-5.png||height="306" width="600"]]
330 -
331 -
332 -
333 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
334 -
335 -
336 -[[image:image-20220602104701-12.png||height="285" width="600"]]
337 -
338 -
339 -
340 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
341 -
342 -
343 -(((
344 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
345 -)))
346 -
347 -
348 348  [[image:image-20220602103227-6.png]]
349 349  
350 -
351 351  [[image:image-20220602103357-7.png]]
352 352  
148 +===== Select the COM port corresponding to USB TTL =====
353 353  
354 -
355 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
356 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
357 -
358 -
359 359  [[image:image-20220602103844-8.png]]
360 360  
152 +===== Select the bin file to burn =====
361 361  
362 -
363 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
364 -(% style="color:blue" %)**3. Select the bin file to burn**
365 -
366 -
367 367  [[image:image-20220602104144-9.png]]
368 368  
369 -
370 370  [[image:image-20220602104251-10.png]]
371 371  
372 -
373 373  [[image:image-20220602104402-11.png]]
374 374  
160 +===== Click to start the download =====
375 375  
376 -
377 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
378 -(% style="color:blue" %)**4. Click to start the download**
379 -
380 380  [[image:image-20220602104923-13.png]]
381 381  
164 +===== The following figure appears to prove that the burning is in progress =====
382 382  
383 -
384 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
385 -(% style="color:blue" %)**5. Check update process**
386 -
387 -
388 388  [[image:image-20220602104948-14.png]]
389 389  
168 +===== The following picture appears to prove that the burning is successful =====
390 390  
391 -
392 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
393 -(% style="color:blue" %)**The following picture shows that the burning is successful**
394 -
395 395  [[image:image-20220602105251-15.png]]
396 396  
172 += LA66 USB LoRaWAN Adapter =
397 397  
174 +LA66 USB LoRaWAN Adapter is the USB Adapter for LA66, it combines a USB TTL Chip and LA66 module which can easy to test the LoRaWAN feature by using PC or embedded device which has USB Interface.
398 398  
399 -= 3.  LA66 USB LoRaWAN Adapter =
176 +Before use, please make sure that the computer has installed the CP2102 driver
400 400  
178 +== Pin Mapping & LED ==
401 401  
402 -== 3.1  Overview ==
180 +== Example Send & Get Messages via LoRaWAN in PC ==
403 403  
182 +Connect the LA66 LoRa Shield to the PC
404 404  
405 -[[image:image-20220715001142-3.png||height="145" width="220"]]
184 +[[image:image-20220602171217-1.png||height="615" width="915"]]
406 406  
407 -
408 -(((
409 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
410 -)))
411 -
412 -(((
413 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
414 -)))
415 -
416 -(((
417 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
418 -)))
419 -
420 -(((
421 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
422 -)))
423 -
424 -(((
425 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
426 -)))
427 -
428 -
429 -
430 -== 3.2  Features ==
431 -
432 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
433 -* Ultra-long RF range
434 -* Support LoRaWAN v1.0.4 protocol
435 -* Support peer-to-peer protocol
436 -* TCXO crystal to ensure RF performance on low temperature
437 -* Spring RF antenna
438 -* Available in different frequency LoRaWAN frequency bands.
439 -* World-wide unique OTAA keys.
440 -* AT Command via UART-TTL interface
441 -* Firmware upgradable via UART interface
442 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
443 -
444 -== 3.3  Specification ==
445 -
446 -* CPU: 32-bit 48 MHz
447 -* Flash: 256KB
448 -* RAM: 64KB
449 -* Input Power Range: 5v
450 -* Frequency Range: 150 MHz ~~ 960 MHz
451 -* Maximum Power +22 dBm constant RF output
452 -* High sensitivity: -148 dBm
453 -* Temperature:
454 -** Storage: -55 ~~ +125℃
455 -** Operating: -40 ~~ +85℃
456 -* Humidity:
457 -** Storage: 5 ~~ 95% (Non-Condensing)
458 -** Operating: 10 ~~ 95% (Non-Condensing)
459 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
460 -* LoRa Rx current: <9 mA
461 -
462 -== 3.4  Pin Mapping & LED ==
463 -
464 -
465 -
466 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
467 -
468 -
469 -(((
470 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
471 -)))
472 -
473 -
474 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
475 -
476 -
477 -[[image:image-20220723100027-1.png]]
478 -
479 -
480 480  Open the serial port tool
481 481  
482 482  [[image:image-20220602161617-8.png]]
483 483  
484 -[[image:image-20220602161718-9.png||height="457" width="800"]]
190 +[[image:image-20220602161718-9.png||height="529" width="927"]]
485 485  
192 +Press the reset switch RST on the LA66 LoRa Shield.
486 486  
194 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
487 487  
488 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
196 +[[image:image-20220602161935-10.png]]
489 489  
490 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
198 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
491 491  
492 -
493 -[[image:image-20220602161935-10.png||height="498" width="800"]]
494 -
495 -
496 -
497 -(% style="color:blue" %)**3. See Uplink Command**
498 -
499 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
500 -
501 501  example: AT+SENDB=01,02,8,05820802581ea0a5
502 502  
503 -[[image:image-20220602162157-11.png||height="497" width="800"]]
202 +[[image:image-20220602162157-11.png]]
504 504  
204 +Check to see if TTN received the message
505 505  
206 +[[image:image-20220602162331-12.png||height="547" width="1044"]]
506 506  
507 -(% style="color:blue" %)**4. Check to see if TTN received the message**
208 +== Example Send & Get Messages via LoRaWAN in RPi ==
508 508  
509 -[[image:image-20220602162331-12.png||height="420" width="800"]]
210 +Connect the LA66 LoRa Shield to the RPI
510 510  
212 +[[image:image-20220602171233-2.png||height="592" width="881"]]
511 511  
214 +Log in to the RPI's terminal and connect to the serial port
512 512  
513 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
216 +[[image:image-20220602153146-3.png]]
514 514  
218 +Press the reset switch RST on the LA66 LoRa Shield.
219 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
515 515  
516 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
221 +[[image:image-20220602154928-5.png]]
517 517  
518 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
223 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
519 519  
520 -(% style="color:red" %)**Preconditions:**
521 -
522 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
523 -
524 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
525 -
526 -
527 -
528 -(% style="color:blue" %)**Steps for usage:**
529 -
530 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
531 -
532 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
533 -
534 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
535 -
536 -
537 -
538 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
539 -
540 -
541 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
542 -
543 -
544 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
545 -
546 -[[image:image-20220723100439-2.png]]
547 -
548 -
549 -
550 -(% style="color:blue" %)**2. Install Minicom in RPi.**
551 -
552 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
553 -
554 - (% style="background-color:yellow" %)**apt update**
555 -
556 - (% style="background-color:yellow" %)**apt install minicom**
557 -
558 -
559 -Use minicom to connect to the RPI's terminal
560 -
561 -[[image:image-20220602153146-3.png||height="439" width="500"]]
562 -
563 -
564 -
565 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
566 -
567 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
568 -
569 -
570 -[[image:image-20220602154928-5.png||height="436" width="500"]]
571 -
572 -
573 -
574 -(% style="color:blue" %)**4. Send Uplink message**
575 -
576 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
577 -
578 578  example: AT+SENDB=01,02,8,05820802581ea0a5
579 579  
227 +[[image:image-20220602160339-6.png]]
580 580  
581 -[[image:image-20220602160339-6.png||height="517" width="600"]]
582 -
583 -
584 -
585 585  Check to see if TTN received the message
586 586  
587 -[[image:image-20220602160627-7.png||height="369" width="800"]]
231 +[[image:image-20220602160627-7.png||height="468" width="1013"]]
588 588  
233 +=== Install Minicom ===
589 589  
235 +Enter the following command in the RPI terminal
590 590  
591 -== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
237 +apt update
592 592  
239 +[[image:image-20220602143155-1.png]]
593 593  
594 -=== 3.8.1  DRAGINO-LA66-APP ===
241 +apt install minicom
595 595  
243 +[[image:image-20220602143744-2.png]]
596 596  
597 -[[image:image-20220723102027-3.png]]
245 +=== Send PC's CPU/RAM usage to TTN via script. ===
598 598  
247 +==== Take python as an example： ====
599 599  
249 +===== Preconditions: =====
600 600  
601 -==== (% style="color:blue" %)**Overview：**(%%) ====
251 +1.LA66 USB LoRaWAN Adapter works fine
602 602  
253 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
603 603  
604 -(((
605 -DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
606 -)))
255 +===== Steps for usage =====
607 607  
608 -(((
609 -View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
610 -)))
257 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
611 611  
259 +2.Run the script and see the TTN
612 612  
261 +[[image:image-20220602115852-3.png]]
613 613  
614 -==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
615 615  
616 616  
617 -Requires a type-c to USB adapter
265 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
618 618  
619 -[[image:image-20220723104754-4.png]]
620 620  
268 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
621 621  
622 -
623 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
624 -
625 -
626 -Function and page introduction
627 -
628 -[[image:image-20220723113448-7.png||height="1481" width="670"]]
629 -
630 -
631 -1.Display LA66 USB LoRaWAN Module connection status
632 -
633 -2.Check and reconnect
634 -
635 -3.Turn send timestamps on or off
636 -
637 -4.Display LoRaWan connection status
638 -
639 -5.Check LoRaWan connection status
640 -
641 -6.The RSSI value of the node when the ACK is received
642 -
643 -7.Node's Signal Strength Icon
644 -
645 -8.Set the packet sending interval of the node in seconds
646 -
647 -9.AT command input box
648 -
649 -10.Send AT command button
650 -
651 -11.Node log box
652 -
653 -12.clear log button
654 -
655 -13.exit button
656 -
657 -
658 -LA66 USB LoRaWAN Module not connected
659 -
660 -[[image:image-20220723110520-5.png||height="903" width="677"]]
661 -
662 -
663 -
664 -Connect LA66 USB LoRaWAN Module
665 -
666 -[[image:image-20220723110626-6.png||height="906" width="680"]]
667 -
668 -
669 -
670 -=== 3.8.2  Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
671 -
672 -
673 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
674 -
675 -[[image:image-20220723134549-8.png]]
676 -
677 -
678 -
679 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
680 -
681 -Sample JSON file please go to this link to download：放置JSON文件的链接
682 -
683 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
684 -
685 -The following is the positioning effect map
686 -
687 -[[image:image-20220723144339-1.png]]
688 -
689 -
690 -
691 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
692 -
693 -
694 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
695 -
696 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
697 -
698 -[[image:image-20220723150132-2.png]]
699 -
700 -
701 -
702 -= 4.  FAQ =
703 -
704 -
705 -== 4.1  How to Compile Source Code for LA66? ==
706 -
707 -
708 -Compile and Upload Code to ASR6601 Platform ：
709 -
710 -
711 -
712 -= 5.  Order Info =
713 -
714 -
715 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
716 -
717 -
718 -(% style="color:blue" %)**XXX**(%%): The default frequency band
719 -
720 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
721 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
722 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
723 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
724 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
725 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
726 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
727 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
728 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
729 -
730 -
731 -
732 -= 6.  Reference =
733 -
734 -
735 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
270 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0