Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 137.1 >
edited by Herong Lu
on 2022/07/26 13:54
To version < 75.1 >
edited by Edwin Chen
on 2022/07/03 00:21
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Lu
1 +XWiki.Edwin
Content
... ... @@ -1,57 +1,24 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 -
11 -
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 -
14 -
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 25  (% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 -)))
27 -)))
28 28  
29 -(((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 -)))
33 -)))
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
34 34  
35 -(((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 -)))
39 39  
40 -(((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 -)))
43 -)))
44 44  
45 -(((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 -)))
49 -)))
50 50  
51 51  
20 +== Features ==
52 52  
53 -== 1.2  Features ==
54 -
55 55  * Support LoRaWAN v1.0.4 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
... ... @@ -62,10 +62,8 @@
62 62  * Firmware upgradable via UART interface
63 63  * Ultra-long RF range
64 64  
32 +== Specification ==
65 65  
66 -
67 -== 1.3  Specification ==
68 -
69 69  * CPU: 32-bit 48 MHz
70 70  * Flash: 256KB
71 71  * RAM: 64KB
... ... @@ -84,79 +84,50 @@
84 84  * LoRa Rx current: <9 mA
85 85  * I/O Voltage: 3.3v
86 86  
52 +== AT Command ==
87 87  
88 -
89 -== 1.4  AT Command ==
90 -
91 -
92 92  AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
93 93  
94 94  
57 +== Dimension ==
95 95  
96 -== 1.5  Dimension ==
59 +[[image:image-20220517072526-1.png]]
97 97  
98 -[[image:image-20220718094750-3.png]]
99 99  
62 +== Pin Mapping ==
100 100  
64 +[[image:image-20220523101537-1.png]]
101 101  
102 -== 1.6  Pin Mapping ==
66 +== Land Pattern ==
103 103  
104 -[[image:image-20220720111850-1.png]]
105 -
106 -
107 -
108 -== 1.7  Land Pattern ==
109 -
110 110  [[image:image-20220517072821-2.png]]
111 111  
112 112  
71 +== Order Info ==
113 113  
114 -= 2.  LA66 LoRaWAN Shield =
73 +Part Number: **LA66-XXX**
115 115  
75 +**XX**: The default frequency band
116 116  
117 -== 2.1  Overview ==
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
118 118  
87 += LA66 LoRaWAN Shield =
119 119  
120 -(((
121 -[[image:image-20220715000826-2.png||height="145" width="220"]]
122 -)))
89 +== Overview ==
123 123  
124 -(((
125 -
126 -)))
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
127 127  
128 -(((
129 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
130 -)))
131 131  
132 -(((
133 -(((
134 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
135 -)))
136 -)))
94 +== Features ==
137 137  
138 -(((
139 -(((
140 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
141 -)))
142 -)))
143 -
144 -(((
145 -(((
146 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
147 -)))
148 -)))
149 -
150 -(((
151 -(((
152 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
153 -)))
154 -)))
155 -
156 -
157 -
158 -== 2.2  Features ==
159 -
160 160  * Arduino Shield base on LA66 LoRaWAN module
161 161  * Support LoRaWAN v1.0.4 protocol
162 162  * Support peer-to-peer protocol
... ... @@ -168,10 +168,8 @@
168 168  * Firmware upgradable via UART interface
169 169  * Ultra-long RF range
170 170  
107 +== Specification ==
171 171  
172 -
173 -== 2.3  Specification ==
174 -
175 175  * CPU: 32-bit 48 MHz
176 176  * Flash: 256KB
177 177  * RAM: 64KB
... ... @@ -190,108 +190,18 @@
190 190  * LoRa Rx current: <9 mA
191 191  * I/O Voltage: 3.3v
192 192  
127 +== Pin Mapping & LED ==
193 193  
129 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
194 194  
195 -== 2.4  LED ==
131 +== Example: Join TTN network and send an uplink message, get downlink message. ==
196 196  
133 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
197 197  
198 -~1. The LED lights up red when there is an upstream data packet
199 -2. When the network is successfully connected, the green light will be on for 5 seconds
200 -3. Purple light on when receiving downlink data packets
135 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
201 201  
137 +=== Items needed for update ===
202 202  
203 -
204 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
205 -
206 -
207 -**Show connection diagram：**
208 -
209 -
210 -[[image:image-20220723170210-2.png||height="908" width="681"]]
211 -
212 -
213 -
214 -(% style="color:blue" %)**1.  open Arduino IDE**
215 -
216 -
217 -[[image:image-20220723170545-4.png]]
218 -
219 -
220 -
221 -(% style="color:blue" %)**2.  Open project**
222 -
223 -
224 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
225 -
226 -[[image:image-20220726135239-1.png]]
227 -
228 -
229 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
230 -
231 -[[image:image-20220726135356-2.png]]
232 -
233 -
234 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
235 -
236 -
237 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
238 -
239 -
240 -
241 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
242 -
243 -
244 -(% style="color:blue" %)**1.  Open project**
245 -
246 -
247 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
248 -
249 -
250 -[[image:image-20220723172502-8.png]]
251 -
252 -
253 -
254 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
255 -
256 -
257 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
258 -
259 -
260 -
261 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
262 -
263 -
264 -(% style="color:blue" %)**1.  Open project**
265 -
266 -
267 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
268 -
269 -
270 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
271 -
272 -
273 -
274 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
275 -
276 -
277 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
278 -
279 -
280 -
281 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
282 -
283 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
284 -
285 -[[image:image-20220723175700-12.png||height="602" width="995"]]
286 -
287 -
288 -
289 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
290 -
291 -
292 -=== 2.8.1  Items needed for update ===
293 -
294 -
295 295  1. LA66 LoRaWAN Shield
296 296  1. Arduino
297 297  1. USB TO TTL Adapter
... ... @@ -299,25 +299,17 @@
299 299  [[image:image-20220602100052-2.png||height="385" width="600"]]
300 300  
301 301  
302 -=== 2.8.2  Connection ===
146 +=== Connection ===
303 303  
304 -
305 305  [[image:image-20220602101311-3.png||height="276" width="600"]]
306 306  
150 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 +**GND  <-> GND
152 +TXD  <-> TXD
153 +RXD  <-> RXD**
307 307  
308 -(((
309 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
310 -)))
155 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield.
311 311  
312 -(((
313 -(% style="background-color:yellow" %)**GND  <-> GND
314 -TXD  <->  TXD
315 -RXD  <->  RXD**
316 -)))
317 -
318 -
319 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
320 -
321 321  Connect USB TTL Adapter to PC after connecting the wires
322 322  
323 323  
... ... @@ -324,115 +324,82 @@
324 324  [[image:image-20220602102240-4.png||height="304" width="600"]]
325 325  
326 326  
327 -=== 2.8.3  Upgrade steps ===
163 +=== Upgrade steps ===
328 328  
165 +==== Switch SW1 to put in ISP position ====
329 329  
330 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
331 -
332 -
333 333  [[image:image-20220602102824-5.png||height="306" width="600"]]
334 334  
335 335  
170 +==== Press the RST switch once ====
336 336  
337 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
338 -
339 -
340 340  [[image:image-20220602104701-12.png||height="285" width="600"]]
341 341  
342 342  
175 +==== Open the Upgrade tool (Tremo Programmer) in PC ====
343 343  
344 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
177 +Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
345 345  
346 -
347 -(((
348 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
349 -)))
350 -
351 -
352 352  [[image:image-20220602103227-6.png]]
353 353  
354 -
355 355  [[image:image-20220602103357-7.png]]
356 356  
183 +===== Select the COM port corresponding to USB TTL =====
357 357  
358 -
359 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
360 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
361 -
362 -
363 363  [[image:image-20220602103844-8.png]]
364 364  
187 +===== Select the bin file to burn =====
365 365  
366 -
367 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
368 -(% style="color:blue" %)**3. Select the bin file to burn**
369 -
370 -
371 371  [[image:image-20220602104144-9.png]]
372 372  
373 -
374 374  [[image:image-20220602104251-10.png]]
375 375  
376 -
377 377  [[image:image-20220602104402-11.png]]
378 378  
195 +===== Click to start the download =====
379 379  
380 -
381 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
382 -(% style="color:blue" %)**4. Click to start the download**
383 -
384 384  [[image:image-20220602104923-13.png]]
385 385  
199 +===== The following figure appears to prove that the burning is in progress =====
386 386  
387 -
388 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
389 -(% style="color:blue" %)**5. Check update process**
390 -
391 -
392 392  [[image:image-20220602104948-14.png]]
393 393  
203 +===== The following picture appears to prove that the burning is successful =====
394 394  
395 -
396 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
397 -(% style="color:blue" %)**The following picture shows that the burning is successful**
398 -
399 399  [[image:image-20220602105251-15.png]]
400 400  
401 401  
208 +== Order Info ==
402 402  
403 -= 3.  LA66 USB LoRaWAN Adapter =
210 +Part Number: **LA66-LoRaWAN-Shield-XXX**
404 404  
212 +**XX**: The default frequency band
405 405  
406 -== 3.1  Overview ==
214 +* **AS923**: LoRaWAN AS923 band
215 +* **AU915**: LoRaWAN AU915 band
216 +* **EU433**: LoRaWAN EU433 band
217 +* **EU868**: LoRaWAN EU868 band
218 +* **KR920**: LoRaWAN KR920 band
219 +* **US915**: LoRaWAN US915 band
220 +* **IN865**: LoRaWAN IN865 band
221 +* **CN470**: LoRaWAN CN470 band
222 +* **PP**: Peer to Peer LoRa Protocol
407 407  
224 +== Package Info ==
408 408  
409 -[[image:image-20220715001142-3.png||height="145" width="220"]]
226 +* LA66 LoRaWAN Shield x 1
227 +* RF Antenna x 1
410 410  
411 411  
412 -(((
413 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
414 -)))
230 += LA66 USB LoRaWAN Adapter =
415 415  
416 -(((
417 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
418 -)))
232 +== Overview ==
419 419  
420 -(((
421 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
422 -)))
234 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
423 423  
424 -(((
425 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
426 -)))
427 427  
428 -(((
429 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
430 -)))
237 +== Features ==
431 431  
432 -
433 -
434 -== 3.2  Features ==
435 -
436 436  * LoRaWAN USB adapter base on LA66 LoRaWAN module
437 437  * Ultra-long RF range
438 438  * Support LoRaWAN v1.0.4 protocol
... ... @@ -443,9 +443,8 @@
443 443  * World-wide unique OTAA keys.
444 444  * AT Command via UART-TTL interface
445 445  * Firmware upgradable via UART interface
446 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
447 447  
448 -== 3.3  Specification ==
250 +== Specification ==
449 449  
450 450  * CPU: 32-bit 48 MHz
451 451  * Flash: 256KB
... ... @@ -463,268 +463,118 @@
463 463  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
464 464  * LoRa Rx current: <9 mA
465 465  
466 -== 3.4  Pin Mapping & LED ==
268 +== Pin Mapping & LED ==
467 467  
270 +== Example Send & Get Messages via LoRaWAN in PC ==
468 468  
272 +Connect the LA66 LoRa Shield to the PC
469 469  
470 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
274 +[[image:image-20220602171217-1.png||height="615" width="915"]]
471 471  
472 -
473 -(((
474 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
475 -)))
476 -
477 -
478 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
479 -
480 -
481 -[[image:image-20220723100027-1.png]]
482 -
483 -
484 484  Open the serial port tool
485 485  
486 486  [[image:image-20220602161617-8.png]]
487 487  
488 -[[image:image-20220602161718-9.png||height="457" width="800"]]
280 +[[image:image-20220602161718-9.png||height="529" width="927"]]
489 489  
282 +Press the reset switch RST on the LA66 LoRa Shield.
490 490  
284 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
491 491  
492 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
286 +[[image:image-20220602161935-10.png]]
493 493  
494 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
288 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
495 495  
496 -
497 -[[image:image-20220602161935-10.png||height="498" width="800"]]
498 -
499 -
500 -
501 -(% style="color:blue" %)**3. See Uplink Command**
502 -
503 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
504 -
505 505  example: AT+SENDB=01,02,8,05820802581ea0a5
506 506  
507 -[[image:image-20220602162157-11.png||height="497" width="800"]]
292 +[[image:image-20220602162157-11.png]]
508 508  
294 +Check to see if TTN received the message
509 509  
296 +[[image:image-20220602162331-12.png||height="547" width="1044"]]
510 510  
511 -(% style="color:blue" %)**4. Check to see if TTN received the message**
298 +== Example Send & Get Messages via LoRaWAN in RPi ==
512 512  
513 -[[image:image-20220602162331-12.png||height="420" width="800"]]
300 +Connect the LA66 LoRa Shield to the RPI
514 514  
302 +[[image:image-20220602171233-2.png||height="592" width="881"]]
515 515  
304 +Log in to the RPI's terminal and connect to the serial port
516 516  
517 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
306 +[[image:image-20220602153146-3.png]]
518 518  
308 +Press the reset switch RST on the LA66 LoRa Shield.
309 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
519 519  
520 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
311 +[[image:image-20220602154928-5.png]]
521 521  
522 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
313 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
523 523  
524 -(% style="color:red" %)**Preconditions:**
525 -
526 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
527 -
528 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
529 -
530 -
531 -
532 -(% style="color:blue" %)**Steps for usage:**
533 -
534 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
535 -
536 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
537 -
538 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
539 -
540 -
541 -
542 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
543 -
544 -
545 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
546 -
547 -
548 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
549 -
550 -[[image:image-20220723100439-2.png]]
551 -
552 -
553 -
554 -(% style="color:blue" %)**2. Install Minicom in RPi.**
555 -
556 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
557 -
558 - (% style="background-color:yellow" %)**apt update**
559 -
560 - (% style="background-color:yellow" %)**apt install minicom**
561 -
562 -
563 -Use minicom to connect to the RPI's terminal
564 -
565 -[[image:image-20220602153146-3.png||height="439" width="500"]]
566 -
567 -
568 -
569 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
570 -
571 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
572 -
573 -
574 -[[image:image-20220602154928-5.png||height="436" width="500"]]
575 -
576 -
577 -
578 -(% style="color:blue" %)**4. Send Uplink message**
579 -
580 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
581 -
582 582  example: AT+SENDB=01,02,8,05820802581ea0a5
583 583  
317 +[[image:image-20220602160339-6.png]]
584 584  
585 -[[image:image-20220602160339-6.png||height="517" width="600"]]
586 -
587 -
588 -
589 589  Check to see if TTN received the message
590 590  
591 -[[image:image-20220602160627-7.png||height="369" width="800"]]
321 +[[image:image-20220602160627-7.png||height="468" width="1013"]]
592 592  
323 +=== Install Minicom ===
593 593  
325 +Enter the following command in the RPI terminal
594 594  
595 -== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
327 +apt update
596 596  
329 +[[image:image-20220602143155-1.png]]
597 597  
598 -=== 3.8.1  DRAGINO-LA66-APP ===
331 +apt install minicom
599 599  
333 +[[image:image-20220602143744-2.png]]
600 600  
601 -[[image:image-20220723102027-3.png]]
335 +=== Send PC's CPU/RAM usage to TTN via script. ===
602 602  
337 +==== Take python as an example： ====
603 603  
339 +===== Preconditions: =====
604 604  
605 -==== (% style="color:blue" %)**Overview：**(%%) ====
341 +1.LA66 USB LoRaWAN Adapter works fine
606 606  
343 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
607 607  
608 -(((
609 -DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
610 -)))
345 +===== Steps for usage =====
611 611  
612 -(((
613 -View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
614 -)))
347 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
615 615  
349 +2.Run the script and see the TTN
616 616  
351 +[[image:image-20220602115852-3.png]]
617 617  
618 -==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
619 619  
620 620  
621 -Requires a type-c to USB adapter
355 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
622 622  
623 -[[image:image-20220723104754-4.png]]
624 624  
358 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
625 625  
626 626  
627 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
628 628  
362 +== Order Info ==
629 629  
630 -Function and page introduction
364 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
631 631  
632 -[[image:image-20220723113448-7.png||height="1481" width="670"]]
366 +**XX**: The default frequency band
633 633  
368 +* **AS923**: LoRaWAN AS923 band
369 +* **AU915**: LoRaWAN AU915 band
370 +* **EU433**: LoRaWAN EU433 band
371 +* **EU868**: LoRaWAN EU868 band
372 +* **KR920**: LoRaWAN KR920 band
373 +* **US915**: LoRaWAN US915 band
374 +* **IN865**: LoRaWAN IN865 band
375 +* **CN470**: LoRaWAN CN470 band
376 +* **PP**: Peer to Peer LoRa Protocol
634 634  
635 -1.Display LA66 USB LoRaWAN Module connection status
378 +== Package Info ==
636 636  
637 -2.Check and reconnect
380 +* LA66 USB LoRaWAN Adapter x 1
638 638  
639 -3.Turn send timestamps on or off
640 -
641 -4.Display LoRaWan connection status
642 -
643 -5.Check LoRaWan connection status
644 -
645 -6.The RSSI value of the node when the ACK is received
646 -
647 -7.Node's Signal Strength Icon
648 -
649 -8.Set the packet sending interval of the node in seconds
650 -
651 -9.AT command input box
652 -
653 -10.Send AT command button
654 -
655 -11.Node log box
656 -
657 -12.clear log button
658 -
659 -13.exit button
660 -
661 -
662 -LA66 USB LoRaWAN Module not connected
663 -
664 -[[image:image-20220723110520-5.png||height="903" width="677"]]
665 -
666 -
667 -
668 -Connect LA66 USB LoRaWAN Module
669 -
670 -[[image:image-20220723110626-6.png||height="906" width="680"]]
671 -
672 -
673 -
674 -=== 3.8.2  Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
675 -
676 -
677 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
678 -
679 -[[image:image-20220723134549-8.png]]
680 -
681 -
682 -
683 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
684 -
685 -Sample JSON file please go to this link to download：放置JSON文件的链接
686 -
687 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
688 -
689 -The following is the positioning effect map
690 -
691 -[[image:image-20220723144339-1.png]]
692 -
693 -
694 -
695 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
696 -
697 -
698 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
699 -
700 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
701 -
702 -[[image:image-20220723150132-2.png]]
703 -
704 -
705 -
706 -= 4.  Order Info =
707 -
708 -
709 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
710 -
711 -
712 -(% style="color:blue" %)**XXX**(%%): The default frequency band
713 -
714 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
715 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
716 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
717 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
718 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
719 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
720 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
721 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
722 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
723 -
724 -
725 -
726 -
727 -= 5.  Reference =
728 -
729 -
730 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
382 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0