Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 136.1 >
edited by Herong Lu
on 2022/07/26 13:53
To version < 166.3 >
edited by Xiaoling
on 2023/05/26 13:55
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Lu
1 +XWiki.Xiaoling
Content
... ... @@ -6,120 +6,14 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
10 += 1.  LA66 LoRaWAN Shield =
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 13  
13 +== 1.1  Overview ==
14 14  
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 19  
20 20  (((
21 -
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 -)))
27 -)))
28 -
29 -(((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 -)))
33 -)))
34 -
35 -(((
36 -(((
37 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 -)))
39 -
40 -(((
41 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 -)))
43 -)))
44 -
45 -(((
46 -(((
47 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 -)))
49 -)))
50 -
51 -
52 -
53 -== 1.2  Features ==
54 -
55 -* Support LoRaWAN v1.0.4 protocol
56 -* Support peer-to-peer protocol
57 -* TCXO crystal to ensure RF performance on low temperature
58 -* SMD Antenna pad and i-pex antenna connector
59 -* Available in different frequency LoRaWAN frequency bands.
60 -* World-wide unique OTAA keys.
61 -* AT Command via UART-TTL interface
62 -* Firmware upgradable via UART interface
63 -* Ultra-long RF range
64 -
65 -
66 -
67 -
68 -== 1.3  Specification ==
69 -
70 -* CPU: 32-bit 48 MHz
71 -* Flash: 256KB
72 -* RAM: 64KB
73 -* Input Power Range: 1.8v ~~ 3.7v
74 -* Power Consumption: < 4uA.
75 -* Frequency Range: 150 MHz ~~ 960 MHz
76 -* Maximum Power +22 dBm constant RF output
77 -* High sensitivity: -148 dBm
78 -* Temperature:
79 -** Storage: -55 ~~ +125℃
80 -** Operating: -40 ~~ +85℃
81 -* Humidity:
82 -** Storage: 5 ~~ 95% (Non-Condensing)
83 -** Operating: 10 ~~ 95% (Non-Condensing)
84 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
85 -* LoRa Rx current: <9 mA
86 -* I/O Voltage: 3.3v
87 -
88 -
89 -
90 -
91 -== 1.4  AT Command ==
92 -
93 -
94 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
95 -
96 -
97 -
98 -== 1.5  Dimension ==
99 -
100 -[[image:image-20220718094750-3.png]]
101 -
102 -
103 -
104 -== 1.6  Pin Mapping ==
105 -
106 -[[image:image-20220720111850-1.png]]
107 -
108 -
109 -
110 -== 1.7  Land Pattern ==
111 -
112 -[[image:image-20220517072821-2.png]]
113 -
114 -
115 -
116 -= 2.  LA66 LoRaWAN Shield =
117 -
118 -
119 -== 2.1  Overview ==
120 -
121 -
122 -(((
123 123  [[image:image-20220715000826-2.png||height="145" width="220"]]
124 124  )))
125 125  
... ... @@ -157,10 +157,11 @@
157 157  
158 158  
159 159  
160 -== 2.2  Features ==
54 +== 1.2  Features ==
161 161  
56 +
162 162  * Arduino Shield base on LA66 LoRaWAN module
163 -* Support LoRaWAN v1.0.4 protocol
58 +* Support LoRaWAN v1.0.3 protocol
164 164  * Support peer-to-peer protocol
165 165  * TCXO crystal to ensure RF performance on low temperature
166 166  * SMA connector
... ... @@ -171,10 +171,9 @@
171 171  * Ultra-long RF range
172 172  
173 173  
69 +== 1.3  Specification ==
174 174  
175 175  
176 -== 2.3  Specification ==
177 -
178 178  * CPU: 32-bit 48 MHz
179 179  * Flash: 256KB
180 180  * RAM: 64KB
... ... @@ -194,20 +194,25 @@
194 194  * I/O Voltage: 3.3v
195 195  
196 196  
91 +== 1.4  Pin Mapping & LED ==
197 197  
198 198  
199 -== 2.4  LED ==
94 +[[image:image-20220817085048-1.png||height="533" width="734"]]
200 200  
201 201  
97 +
202 202  ~1. The LED lights up red when there is an upstream data packet
203 203  2. When the network is successfully connected, the green light will be on for 5 seconds
204 204  3. Purple light on when receiving downlink data packets
205 205  
206 206  
103 +[[image:image-20220820112305-1.png||height="515" width="749"]]
207 207  
208 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
209 209  
210 210  
107 +== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
108 +
109 +
211 211  **Show connection diagram：**
212 212  
213 213  
... ... @@ -225,14 +225,19 @@
225 225  (% style="color:blue" %)**2.  Open project**
226 226  
227 227  
228 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
127 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
229 229  
129 +[[image:image-20220726135239-1.png]]
230 230  
231 231  
132 +
232 232  (% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
233 233  
234 234  
136 +[[image:image-20220726135356-2.png]]
235 235  
138 +
139 +
236 236  (% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
237 237  
238 238  
... ... @@ -240,13 +240,13 @@
240 240  
241 241  
242 242  
243 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
147 +== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
244 244  
245 245  
246 246  (% style="color:blue" %)**1.  Open project**
247 247  
248 248  
249 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
153 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
250 250  
251 251  
252 252  [[image:image-20220723172502-8.png]]
... ... @@ -253,7 +253,7 @@
253 253  
254 254  
255 255  
256 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
160 +(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
257 257  
258 258  
259 259  [[image:image-20220723172938-9.png||height="652" width="1050"]]
... ... @@ -260,13 +260,13 @@
260 260  
261 261  
262 262  
263 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
167 +== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
264 264  
265 265  
266 266  (% style="color:blue" %)**1.  Open project**
267 267  
268 268  
269 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
173 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0>>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
270 270  
271 271  
272 272  [[image:image-20220723173341-10.png||height="581" width="1014"]]
... ... @@ -280,456 +280,254 @@
280 280  
281 281  
282 282  
283 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
284 284  
285 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
286 286  
287 -[[image:image-20220723175700-12.png||height="602" width="995"]]
189 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
288 288  
289 289  
192 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
290 290  
291 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
292 292  
195 +[[image:image-20220723175700-12.png||height="602" width="995"]]
293 293  
294 -=== 2.8.1  Items needed for update ===
295 295  
296 296  
297 -1. LA66 LoRaWAN Shield
298 -1. Arduino
299 -1. USB TO TTL Adapter
199 +== 1.8  Example: How to join helium ==
300 300  
301 -[[image:image-20220602100052-2.png||height="385" width="600"]]
302 302  
202 +(% style="color:blue" %)**1.  Create a new device.**
303 303  
304 -=== 2.8.2  Connection ===
305 305  
205 +[[image:image-20220907165500-1.png||height="464" width="940"]]
306 306  
307 -[[image:image-20220602101311-3.png||height="276" width="600"]]
308 308  
309 309  
310 -(((
311 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
312 -)))
209 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
313 313  
314 -(((
315 -(% style="background-color:yellow" %)**GND  <-> GND
316 -TXD  <->  TXD
317 -RXD  <->  RXD**
318 -)))
319 319  
212 +[[image:image-20220907165837-2.png||height="375" width="809"]]
320 320  
321 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
322 322  
323 -Connect USB TTL Adapter to PC after connecting the wires
324 324  
216 +(% style="color:blue" %)**3.  Use AT commands.**
325 325  
326 -[[image:image-20220602102240-4.png||height="304" width="600"]]
327 327  
219 +[[image:image-20220602100052-2.png||height="385" width="600"]]
328 328  
329 -=== 2.8.3  Upgrade steps ===
330 330  
331 331  
332 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
223 +(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
333 333  
334 334  
335 -[[image:image-20220602102824-5.png||height="306" width="600"]]
226 +[[image:image-20220907170308-3.png||height="556" width="617"]]
336 336  
337 337  
338 338  
339 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
230 +(% style="color:blue" %)**5.  Network successfully.**
340 340  
341 341  
342 -[[image:image-20220602104701-12.png||height="285" width="600"]]
233 +[[image:image-20220907170436-4.png]]
343 343  
344 344  
345 345  
346 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
237 +(% style="color:blue" %)**6.  Send uplink using command**
347 347  
348 348  
349 -(((
350 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
351 -)))
240 +[[image:image-20220912084334-1.png]]
352 352  
353 353  
354 -[[image:image-20220602103227-6.png]]
243 +[[image:image-20220912084412-3.png]]
355 355  
356 356  
357 -[[image:image-20220602103357-7.png]]
358 358  
247 +[[image:image-20220907170744-6.png||height="242" width="798"]]
359 359  
360 360  
361 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
362 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
363 363  
251 +== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
364 364  
365 -[[image:image-20220602103844-8.png]]
366 366  
254 +=== 1.9.1  Items needed for update ===
367 367  
368 368  
369 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
370 -(% style="color:blue" %)**3. Select the bin file to burn**
257 +1. LA66 LoRaWAN Shield
258 +1. Arduino
259 +1. USB TO TTL Adapter
371 371  
261 +[[image:image-20220602100052-2.png||height="385" width="600"]]
372 372  
373 -[[image:image-20220602104144-9.png]]
374 374  
375 375  
376 -[[image:image-20220602104251-10.png]]
265 +=== 1.9.2  Connection ===
377 377  
378 378  
379 -[[image:image-20220602104402-11.png]]
268 +[[image:image-20220602101311-3.png||height="276" width="600"]]
380 380  
381 381  
382 -
383 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
384 -(% style="color:blue" %)**4. Click to start the download**
385 -
386 -[[image:image-20220602104923-13.png]]
387 -
388 -
389 -
390 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
391 -(% style="color:blue" %)**5. Check update process**
392 -
393 -
394 -[[image:image-20220602104948-14.png]]
395 -
396 -
397 -
398 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
399 -(% style="color:blue" %)**The following picture shows that the burning is successful**
400 -
401 -[[image:image-20220602105251-15.png]]
402 -
403 -
404 -
405 -= 3.  LA66 USB LoRaWAN Adapter =
406 -
407 -
408 -== 3.1  Overview ==
409 -
410 -
411 -[[image:image-20220715001142-3.png||height="145" width="220"]]
412 -
413 -
414 414  (((
415 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
272 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
416 416  )))
417 417  
418 418  (((
419 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
276 +(% style="background-color:yellow" %)**GND  <-> GND
277 +TXD  <->  TXD
278 +RXD  <->  RXD**
420 420  )))
421 421  
422 -(((
423 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
424 -)))
425 425  
426 -(((
427 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
428 -)))
282 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
429 429  
430 -(((
431 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
432 -)))
284 +Connect USB TTL Adapter to PC after connecting the wires
433 433  
434 434  
287 +[[image:image-20220602102240-4.png||height="304" width="600"]]
435 435  
436 -== 3.2  Features ==
437 437  
438 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
439 -* Ultra-long RF range
440 -* Support LoRaWAN v1.0.4 protocol
441 -* Support peer-to-peer protocol
442 -* TCXO crystal to ensure RF performance on low temperature
443 -* Spring RF antenna
444 -* Available in different frequency LoRaWAN frequency bands.
445 -* World-wide unique OTAA keys.
446 -* AT Command via UART-TTL interface
447 -* Firmware upgradable via UART interface
448 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
449 449  
291 +=== 1.9.3  Upgrade steps ===
450 450  
451 -== 3.3  Specification ==
452 452  
453 -* CPU: 32-bit 48 MHz
454 -* Flash: 256KB
455 -* RAM: 64KB
456 -* Input Power Range: 5v
457 -* Frequency Range: 150 MHz ~~ 960 MHz
458 -* Maximum Power +22 dBm constant RF output
459 -* High sensitivity: -148 dBm
460 -* Temperature:
461 -** Storage: -55 ~~ +125℃
462 -** Operating: -40 ~~ +85℃
463 -* Humidity:
464 -** Storage: 5 ~~ 95% (Non-Condensing)
465 -** Operating: 10 ~~ 95% (Non-Condensing)
466 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
467 -* LoRa Rx current: <9 mA
468 468  
295 +==== (% style="color:blue" %)**1.  Switch SW1 to put in ISP position**(%%) ====
469 469  
470 -== 3.4  Pin Mapping & LED ==
471 471  
298 +[[image:image-20220602102824-5.png||height="306" width="600"]]
472 472  
473 473  
474 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
475 475  
476 476  
477 -(((
478 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
479 -)))
303 +==== (% style="color:blue" %)**2.  Press the RST switch once**(%%) ====
480 480  
481 481  
482 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
306 +[[image:image-20220817085447-1.png]]
483 483  
484 484  
485 -[[image:image-20220723100027-1.png]]
486 486  
487 487  
488 -Open the serial port tool
311 +==== (% style="color:blue" %)**3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**(%%) ====
489 489  
490 -[[image:image-20220602161617-8.png]]
491 491  
492 -[[image:image-20220602161718-9.png||height="457" width="800"]]
493 493  
494 -
495 -
496 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
497 -
498 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
499 -
500 -
501 -[[image:image-20220602161935-10.png||height="498" width="800"]]
502 -
503 -
504 -
505 -(% style="color:blue" %)**3. See Uplink Command**
506 -
507 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
508 -
509 -example: AT+SENDB=01,02,8,05820802581ea0a5
510 -
511 -[[image:image-20220602162157-11.png||height="497" width="800"]]
512 -
513 -
514 -
515 -(% style="color:blue" %)**4. Check to see if TTN received the message**
516 -
517 -[[image:image-20220602162331-12.png||height="420" width="800"]]
518 -
519 -
520 -
521 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
522 -
523 -
524 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
525 -
526 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
527 -
528 -(% style="color:red" %)**Preconditions:**
529 -
530 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
531 -
532 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
533 -
534 -
535 -
536 -(% style="color:blue" %)**Steps for usage:**
537 -
538 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
539 -
540 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
541 -
542 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
543 -
544 -
545 -
546 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
547 -
548 -
549 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
550 -
551 -
552 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
553 -
554 -[[image:image-20220723100439-2.png]]
555 -
556 -
557 -
558 -(% style="color:blue" %)**2. Install Minicom in RPi.**
559 -
560 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
561 -
562 - (% style="background-color:yellow" %)**apt update**
563 -
564 - (% style="background-color:yellow" %)**apt install minicom**
565 -
566 -
567 -Use minicom to connect to the RPI's terminal
568 -
569 -[[image:image-20220602153146-3.png||height="439" width="500"]]
570 -
571 -
572 -
573 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
574 -
575 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
576 -
577 -
578 -[[image:image-20220602154928-5.png||height="436" width="500"]]
579 -
580 -
581 -
582 -(% style="color:blue" %)**4. Send Uplink message**
583 -
584 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
585 -
586 -example: AT+SENDB=01,02,8,05820802581ea0a5
587 -
588 -
589 -[[image:image-20220602160339-6.png||height="517" width="600"]]
590 -
591 -
592 -
593 -Check to see if TTN received the message
594 -
595 -[[image:image-20220602160627-7.png||height="369" width="800"]]
596 -
597 -
598 -
599 -== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
600 -
601 -
602 -=== 3.8.1  DRAGINO-LA66-APP ===
603 -
604 -
605 -[[image:image-20220723102027-3.png]]
606 -
607 -
608 -
609 -==== (% style="color:blue" %)**Overview：**(%%) ====
610 -
611 -
612 612  (((
613 -DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
316 +(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
614 614  )))
615 615  
616 -(((
617 -View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
618 -)))
619 619  
320 +[[image:image-20220602103227-6.png]]
620 620  
621 621  
622 -==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
323 +[[image:image-20220602103357-7.png]]
623 623  
624 624  
625 -Requires a type-c to USB adapter
626 626  
627 -[[image:image-20220723104754-4.png]]
327 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
328 +(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
628 628  
629 629  
331 +[[image:image-20220602103844-8.png]]
630 630  
631 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
632 632  
633 633  
634 -Function and page introduction
335 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
336 +(% style="color:blue" %)**3.  Select the bin file to burn**
635 635  
636 -[[image:image-20220723113448-7.png||height="1481" width="670"]]
637 637  
339 +[[image:image-20220602104144-9.png]]
638 638  
639 -1.Display LA66 USB LoRaWAN Module connection status
640 640  
641 -2.Check and reconnect
342 +[[image:image-20220602104251-10.png]]
642 642  
643 -3.Turn send timestamps on or off
644 644  
645 -4.Display LoRaWan connection status
345 +[[image:image-20220602104402-11.png]]
646 646  
647 -5.Check LoRaWan connection status
648 648  
649 -6.The RSSI value of the node when the ACK is received
650 650  
651 -7.Node's Signal Strength Icon
349 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
350 +(% style="color:blue" %)**4.  Click to start the download**
652 652  
653 -8.Set the packet sending interval of the node in seconds
654 654  
655 -9.AT command input box
353 +[[image:image-20220602104923-13.png]]
656 656  
657 -10.Send AT command button
658 658  
659 -11.Node log box
660 660  
661 -12.clear log button
357 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
358 +(% style="color:blue" %)**5.  Check update process**
662 662  
663 -13.exit button
664 664  
361 +[[image:image-20220602104948-14.png]]
665 665  
666 -LA66 USB LoRaWAN Module not connected
667 667  
668 -[[image:image-20220723110520-5.png||height="903" width="677"]]
669 669  
365 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
366 +(% style="color:blue" %)**The following picture shows that the burning is successful**
670 670  
671 671  
672 -Connect LA66 USB LoRaWAN Module
369 +[[image:image-20220602105251-15.png]]
673 673  
674 -[[image:image-20220723110626-6.png||height="906" width="680"]]
675 675  
676 676  
373 += 2.  FAQ =
677 677  
678 -=== 3.8.2  Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
375 +== 2.1  How to Compile Source Code for LA66? ==
679 679  
680 680  
681 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
378 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
682 682  
683 -[[image:image-20220723134549-8.png]]
684 684  
685 685  
382 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
686 686  
687 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
688 688  
689 -Sample JSON file please go to this link to download：放置JSON文件的链接
385 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:.Instruction for LA66 Peer to Peer firmware.WebHome]]
690 690  
691 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
387 += 3.  Order Info =
692 692  
693 -The following is the positioning effect map
694 694  
695 -[[image:image-20220723144339-1.png]]
390 +**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
696 696  
697 697  
393 +(% style="color:blue" %)**XXX**(%%): The default frequency band
698 698  
699 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
395 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
396 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
397 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
398 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
399 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
400 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
401 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
402 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
403 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
700 700  
701 701  
702 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
406 += 4.  Reference =
703 703  
704 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
705 705  
706 -[[image:image-20220723150132-2.png]]
409 +* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
707 707  
708 708  
412 += 5.  FCC Statement =
709 709  
710 -= 4.  Order Info =
711 711  
415 +(% style="color:red" %)**FCC Caution:**
712 712  
713 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
417 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
714 714  
419 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
715 715  
716 -(% style="color:blue" %)**XXX**(%%): The default frequency band
717 717  
718 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
719 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
720 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
721 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
722 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
723 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
724 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
725 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
726 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
422 +(% style="color:red" %)**IMPORTANT NOTE: **
727 727  
424 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
728 728  
426 +—Reorient or relocate the receiving antenna.
729 729  
428 +—Increase the separation between the equipment and receiver.
730 730  
430 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
731 731  
732 -= 5.  Reference =
432 +—Consult the dealer or an experienced radio/TV technician for help.
733 733  
734 734  
735 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
435 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
436 +
437 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0