Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 135.1 >
edited by Herong Lu
on 2022/07/26 13:52
To version < 83.1 >
edited by Edwin Chen
on 2022/07/10 22:05
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Lu
1 +XWiki.Edwin
Content
... ... @@ -1,57 +1,24 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 -
11 -
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 -
14 -
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 25  (% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 -)))
27 -)))
28 28  
29 -(((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 -)))
33 -)))
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
34 34  
35 -(((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 -)))
39 39  
40 -(((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 -)))
43 -)))
44 44  
45 -(((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 -)))
49 -)))
50 50  
51 51  
20 +== Features ==
52 52  
53 -== 1.2  Features ==
54 -
55 55  * Support LoRaWAN v1.0.4 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
... ... @@ -62,11 +62,8 @@
62 62  * Firmware upgradable via UART interface
63 63  * Ultra-long RF range
64 64  
32 +== Specification ==
65 65  
66 -
67 -
68 -== 1.3  Specification ==
69 -
70 70  * CPU: 32-bit 48 MHz
71 71  * Flash: 256KB
72 72  * RAM: 64KB
... ... @@ -85,80 +85,50 @@
85 85  * LoRa Rx current: <9 mA
86 86  * I/O Voltage: 3.3v
87 87  
52 +== AT Command ==
88 88  
89 -
90 -
91 -== 1.4  AT Command ==
92 -
93 -
94 94  AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
95 95  
96 96  
57 +== Dimension ==
97 97  
98 -== 1.5  Dimension ==
59 +[[image:image-20220517072526-1.png]]
99 99  
100 -[[image:image-20220718094750-3.png]]
101 101  
62 +== Pin Mapping ==
102 102  
64 +[[image:image-20220523101537-1.png]]
103 103  
104 -== 1.6  Pin Mapping ==
66 +== Land Pattern ==
105 105  
106 -[[image:image-20220720111850-1.png]]
107 -
108 -
109 -
110 -== 1.7  Land Pattern ==
111 -
112 112  [[image:image-20220517072821-2.png]]
113 113  
114 114  
71 +== Order Info ==
115 115  
116 -= 2.  LA66 LoRaWAN Shield =
73 +Part Number: **LA66-XXX**
117 117  
75 +**XX**: The default frequency band
118 118  
119 -== 2.1  Overview ==
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
120 120  
87 += LA66 LoRaWAN Shield =
121 121  
122 -(((
123 -[[image:image-20220715000826-2.png||height="145" width="220"]]
124 -)))
89 +== Overview ==
125 125  
126 -(((
127 -
128 -)))
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
129 129  
130 -(((
131 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
132 -)))
133 133  
134 -(((
135 -(((
136 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
137 -)))
138 -)))
94 +== Features ==
139 139  
140 -(((
141 -(((
142 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
143 -)))
144 -)))
145 -
146 -(((
147 -(((
148 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
149 -)))
150 -)))
151 -
152 -(((
153 -(((
154 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
155 -)))
156 -)))
157 -
158 -
159 -
160 -== 2.2  Features ==
161 -
162 162  * Arduino Shield base on LA66 LoRaWAN module
163 163  * Support LoRaWAN v1.0.4 protocol
164 164  * Support peer-to-peer protocol
... ... @@ -170,11 +170,8 @@
170 170  * Firmware upgradable via UART interface
171 171  * Ultra-long RF range
172 172  
107 +== Specification ==
173 173  
174 -
175 -
176 -== 2.3  Specification ==
177 -
178 178  * CPU: 32-bit 48 MHz
179 179  * Flash: 256KB
180 180  * RAM: 64KB
... ... @@ -193,107 +193,18 @@
193 193  * LoRa Rx current: <9 mA
194 194  * I/O Voltage: 3.3v
195 195  
127 +== Pin Mapping & LED ==
196 196  
129 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
197 197  
131 +== Example: Join TTN network and send an uplink message, get downlink message. ==
198 198  
199 -== 2.4  LED ==
133 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
200 200  
135 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
201 201  
202 -~1. The LED lights up red when there is an upstream data packet
203 -2. When the network is successfully connected, the green light will be on for 5 seconds
204 -3. Purple light on when receiving downlink data packets
137 +=== Items needed for update ===
205 205  
206 -
207 -
208 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
209 -
210 -
211 -**Show connection diagram：**
212 -
213 -
214 -[[image:image-20220723170210-2.png||height="908" width="681"]]
215 -
216 -
217 -
218 -(% style="color:blue" %)**1.  open Arduino IDE**
219 -
220 -
221 -[[image:image-20220723170545-4.png]]
222 -
223 -
224 -
225 -(% style="color:blue" %)**2.  Open project**
226 -
227 -
228 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
229 -
230 -
231 -
232 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
233 -
234 -
235 -
236 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
237 -
238 -
239 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
240 -
241 -
242 -
243 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
244 -
245 -
246 -(% style="color:blue" %)**1.  Open project**
247 -
248 -
249 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
250 -
251 -
252 -[[image:image-20220723172502-8.png]]
253 -
254 -
255 -
256 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
257 -
258 -
259 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
260 -
261 -
262 -
263 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
264 -
265 -
266 -(% style="color:blue" %)**1.  Open project**
267 -
268 -
269 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
270 -
271 -
272 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
273 -
274 -
275 -
276 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
277 -
278 -
279 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
280 -
281 -
282 -
283 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
284 -
285 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
286 -
287 -[[image:image-20220723175700-12.png||height="602" width="995"]]
288 -
289 -
290 -
291 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
292 -
293 -
294 -=== 2.8.1  Items needed for update ===
295 -
296 -
297 297  1. LA66 LoRaWAN Shield
298 298  1. Arduino
299 299  1. USB TO TTL Adapter
... ... @@ -301,23 +301,15 @@
301 301  [[image:image-20220602100052-2.png||height="385" width="600"]]
302 302  
303 303  
304 -=== 2.8.2  Connection ===
146 +=== Connection ===
305 305  
306 -
307 307  [[image:image-20220602101311-3.png||height="276" width="600"]]
308 308  
150 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 +**GND  <-> GND
152 +TXD  <-> TXD
153 +RXD  <-> RXD**
309 309  
310 -(((
311 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
312 -)))
313 -
314 -(((
315 -(% style="background-color:yellow" %)**GND  <-> GND
316 -TXD  <->  TXD
317 -RXD  <->  RXD**
318 -)))
319 -
320 -
321 321  Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
322 322  
323 323  Connect USB TTL Adapter to PC after connecting the wires
... ... @@ -326,115 +326,91 @@
326 326  [[image:image-20220602102240-4.png||height="304" width="600"]]
327 327  
328 328  
329 -=== 2.8.3  Upgrade steps ===
163 +=== Upgrade steps ===
330 330  
165 +==== Switch SW1 to put in ISP position ====
331 331  
332 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
333 -
334 -
335 335  [[image:image-20220602102824-5.png||height="306" width="600"]]
336 336  
337 337  
170 +==== Press the RST switch once ====
338 338  
339 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
340 -
341 -
342 342  [[image:image-20220602104701-12.png||height="285" width="600"]]
343 343  
344 344  
175 +==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
345 345  
346 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
177 +**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
347 347  
348 -
349 -(((
350 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
351 -)))
352 -
353 -
354 354  [[image:image-20220602103227-6.png]]
355 355  
356 -
357 357  [[image:image-20220602103357-7.png]]
358 358  
359 359  
360 -
361 361  (% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
362 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
185 +**2. Select the COM port corresponding to USB TTL**
363 363  
364 -
365 365  [[image:image-20220602103844-8.png]]
366 366  
367 367  
368 -
369 369  (% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
370 -(% style="color:blue" %)**3. Select the bin file to burn**
191 +**3. Select the bin file to burn**
371 371  
372 -
373 373  [[image:image-20220602104144-9.png]]
374 374  
375 -
376 376  [[image:image-20220602104251-10.png]]
377 377  
378 -
379 379  [[image:image-20220602104402-11.png]]
380 380  
381 381  
382 -
383 383  (% class="wikigeneratedid" id="HClicktostartthedownload" %)
384 -(% style="color:blue" %)**4. Click to start the download**
201 +**4. Click to start the download**
385 385  
386 386  [[image:image-20220602104923-13.png]]
387 387  
388 388  
389 -
390 390  (% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
391 -(% style="color:blue" %)**5. Check update process**
207 +**5. Check update process**
392 392  
393 -
394 394  [[image:image-20220602104948-14.png]]
395 395  
396 396  
397 -
398 398  (% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
399 -(% style="color:blue" %)**The following picture shows that the burning is successful**
213 +**The following picture shows that the burning is successful**
400 400  
401 401  [[image:image-20220602105251-15.png]]
402 402  
403 403  
218 +== Order Info ==
404 404  
405 -= 3.  LA66 USB LoRaWAN Adapter =
220 +Part Number: **LA66-LoRaWAN-Shield-XXX**
406 406  
222 +**XX**: The default frequency band
407 407  
408 -== 3.1  Overview ==
224 +* **AS923**: LoRaWAN AS923 band
225 +* **AU915**: LoRaWAN AU915 band
226 +* **EU433**: LoRaWAN EU433 band
227 +* **EU868**: LoRaWAN EU868 band
228 +* **KR920**: LoRaWAN KR920 band
229 +* **US915**: LoRaWAN US915 band
230 +* **IN865**: LoRaWAN IN865 band
231 +* **CN470**: LoRaWAN CN470 band
232 +* **PP**: Peer to Peer LoRa Protocol
409 409  
234 +== Package Info ==
410 410  
411 -[[image:image-20220715001142-3.png||height="145" width="220"]]
236 +* LA66 LoRaWAN Shield x 1
237 +* RF Antenna x 1
412 412  
239 += LA66 USB LoRaWAN Adapter =
413 413  
414 -(((
415 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
416 -)))
241 +== Overview ==
417 417  
418 -(((
419 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
420 -)))
243 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
421 421  
422 -(((
423 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
424 -)))
425 425  
426 -(((
427 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
428 -)))
246 +== Features ==
429 429  
430 -(((
431 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
432 -)))
433 -
434 -
435 -
436 -== 3.2  Features ==
437 -
438 438  * LoRaWAN USB adapter base on LA66 LoRaWAN module
439 439  * Ultra-long RF range
440 440  * Support LoRaWAN v1.0.4 protocol
... ... @@ -445,11 +445,9 @@
445 445  * World-wide unique OTAA keys.
446 446  * AT Command via UART-TTL interface
447 447  * Firmware upgradable via UART interface
448 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
449 449  
259 +== Specification ==
450 450  
451 -== 3.3  Specification ==
452 -
453 453  * CPU: 32-bit 48 MHz
454 454  * Flash: 256KB
455 455  * RAM: 64KB
... ... @@ -466,25 +466,16 @@
466 466  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
467 467  * LoRa Rx current: <9 mA
468 468  
277 +== Pin Mapping & LED ==
469 469  
470 -== 3.4  Pin Mapping & LED ==
279 +== Example Send & Get Messages via LoRaWAN in PC ==
471 471  
472 -
473 -
474 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
475 -
476 -
477 -(((
478 478  Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
479 -)))
480 480  
283 +~1. Connect the LA66 USB LoRaWAN adapter to PC
481 481  
482 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
285 +[[image:image-20220602171217-1.png||height="538" width="800"]]
483 483  
484 -
485 -[[image:image-20220723100027-1.png]]
486 -
487 -
488 488  Open the serial port tool
489 489  
490 490  [[image:image-20220602161617-8.png]]
... ... @@ -492,76 +492,67 @@
492 492  [[image:image-20220602161718-9.png||height="457" width="800"]]
493 493  
494 494  
294 +2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
495 495  
496 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
497 -
498 498  The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
499 499  
500 -
501 501  [[image:image-20220602161935-10.png||height="498" width="800"]]
502 502  
503 503  
301 +3. See Uplink Command
504 504  
505 -(% style="color:blue" %)**3. See Uplink Command**
303 +Command format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
506 506  
507 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
508 -
509 509  example: AT+SENDB=01,02,8,05820802581ea0a5
510 510  
511 511  [[image:image-20220602162157-11.png||height="497" width="800"]]
512 512  
513 513  
310 +4. Check to see if TTN received the message
514 514  
515 -(% style="color:blue" %)**4. Check to see if TTN received the message**
516 -
517 517  [[image:image-20220602162331-12.png||height="420" width="800"]]
518 518  
519 519  
520 520  
521 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
316 +== (% id="cke_bm_637361S" style="display:none" %) (%%)Example: Send PC's CPU/RAM usage to TTN via python ==
522 522  
318 +(% class="wikigeneratedid" id="HUsepythonasanexampleFF1A" %)
319 +**Use python as an example：**
523 523  
524 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
321 +(% class="wikigeneratedid" id="HPreconditions:" %)
322 +**Preconditions:**
525 525  
526 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
324 +1.LA66 USB LoRaWAN Adapter works fine
527 527  
528 -(% style="color:red" %)**Preconditions:**
326 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
529 529  
530 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
328 +(% class="wikigeneratedid" id="HStepsforusage" %)
329 +**Steps for usage**
531 531  
532 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
331 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
533 533  
333 +2.Run the python script in PC and see the TTN
534 534  
535 -
536 -(% style="color:blue" %)**Steps for usage:**
537 -
538 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
539 -
540 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
541 -
542 542  [[image:image-20220602115852-3.png||height="450" width="1187"]]
543 543  
544 544  
545 545  
546 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
339 +== Example Send & Get Messages via LoRaWAN in RPi ==
547 547  
548 -
549 549  Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
550 550  
343 +~1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
551 551  
552 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
345 +[[image:image-20220602171233-2.png||height="538" width="800"]]
553 553  
554 -[[image:image-20220723100439-2.png]]
555 555  
348 +2. Install Minicom in RPi.
556 556  
557 -
558 -(% style="color:blue" %)**2. Install Minicom in RPi.**
559 -
560 560  (% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
561 561  
562 - (% style="background-color:yellow" %)**apt update**
352 +(% class="mark" %)apt update
563 563  
564 - (% style="background-color:yellow" %)**apt install minicom**
354 +(% class="mark" %)apt install minicom
565 565  
566 566  
567 567  Use minicom to connect to the RPI's terminal
... ... @@ -569,27 +569,20 @@
569 569  [[image:image-20220602153146-3.png||height="439" width="500"]]
570 570  
571 571  
362 +3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.
363 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
572 572  
573 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
574 -
575 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
576 -
577 -
578 578  [[image:image-20220602154928-5.png||height="436" width="500"]]
579 579  
580 580  
368 +4. Send Uplink message
581 581  
582 -(% style="color:blue" %)**4. Send Uplink message**
370 +Format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
583 583  
584 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
585 -
586 586  example: AT+SENDB=01,02,8,05820802581ea0a5
587 587  
588 -
589 589  [[image:image-20220602160339-6.png||height="517" width="600"]]
590 590  
591 -
592 -
593 593  Check to see if TTN received the message
594 594  
595 595  [[image:image-20220602160627-7.png||height="369" width="800"]]
... ... @@ -596,140 +596,35 @@
596 596  
597 597  
598 598  
599 -== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
382 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
600 600  
601 601  
602 -=== 3.8.1  DRAGINO-LA66-APP ===
385 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
603 603  
604 604  
605 -[[image:image-20220723102027-3.png]]
606 606  
389 +== Order Info ==
607 607  
391 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
608 608  
609 -==== (% style="color:blue" %)**Overview：**(%%) ====
393 +**XX**: The default frequency band
610 610  
395 +* **AS923**: LoRaWAN AS923 band
396 +* **AU915**: LoRaWAN AU915 band
397 +* **EU433**: LoRaWAN EU433 band
398 +* **EU868**: LoRaWAN EU868 band
399 +* **KR920**: LoRaWAN KR920 band
400 +* **US915**: LoRaWAN US915 band
401 +* **IN865**: LoRaWAN IN865 band
402 +* **CN470**: LoRaWAN CN470 band
403 +* **PP**: Peer to Peer LoRa Protocol
611 611  
612 -(((
613 -DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
614 -)))
405 +== Package Info ==
615 615  
616 -(((
617 -View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
618 -)))
407 +* LA66 USB LoRaWAN Adapter x 1
619 619  
409 += Reference =
620 620  
621 -
622 -==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
623 -
624 -
625 -Requires a type-c to USB adapter
626 -
627 -[[image:image-20220723104754-4.png]]
628 -
629 -
630 -
631 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
632 -
633 -
634 -Function and page introduction
635 -
636 -[[image:image-20220723113448-7.png||height="1481" width="670"]]
637 -
638 -
639 -1.Display LA66 USB LoRaWAN Module connection status
640 -
641 -2.Check and reconnect
642 -
643 -3.Turn send timestamps on or off
644 -
645 -4.Display LoRaWan connection status
646 -
647 -5.Check LoRaWan connection status
648 -
649 -6.The RSSI value of the node when the ACK is received
650 -
651 -7.Node's Signal Strength Icon
652 -
653 -8.Set the packet sending interval of the node in seconds
654 -
655 -9.AT command input box
656 -
657 -10.Send AT command button
658 -
659 -11.Node log box
660 -
661 -12.clear log button
662 -
663 -13.exit button
664 -
665 -
666 -LA66 USB LoRaWAN Module not connected
667 -
668 -[[image:image-20220723110520-5.png||height="903" width="677"]]
669 -
670 -
671 -
672 -Connect LA66 USB LoRaWAN Module
673 -
674 -[[image:image-20220723110626-6.png||height="906" width="680"]]
675 -
676 -
677 -
678 -=== 3.8.2  Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
679 -
680 -
681 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
682 -
683 -[[image:image-20220723134549-8.png]]
684 -
685 -
686 -
687 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
688 -
689 -Sample JSON file please go to this link to download：放置JSON文件的链接
690 -
691 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
692 -
693 -The following is the positioning effect map
694 -
695 -[[image:image-20220723144339-1.png]]
696 -
697 -
698 -
699 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
700 -
701 -
702 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
703 -
704 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
705 -
706 -[[image:image-20220723150132-2.png]]
707 -
708 -
709 -
710 -= 4.  Order Info =
711 -
712 -
713 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
714 -
715 -
716 -(% style="color:blue" %)**XXX**(%%): The default frequency band
717 -
718 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
719 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
720 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
721 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
722 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
723 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
724 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
725 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
726 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
727 -
728 -
729 -
730 -
731 -
732 -= 5.  Reference =
733 -
734 -
735 735  * Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
412 +
413 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0