Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 134.8 >
edited by Xiaoling
on 2022/07/26 10:45
To version < 71.1 >
edited by Edwin Chen
on 2022/07/03 00:00
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,57 +1,24 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 -
11 -
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 -
14 -
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 25  (% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 -)))
27 -)))
28 28  
29 -(((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 -)))
33 -)))
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
34 34  
35 -(((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 -)))
39 39  
40 -(((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 -)))
43 -)))
44 44  
45 -(((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 -)))
49 -)))
50 50  
51 51  
20 +== Features ==
52 52  
53 -== 1.2  Features ==
54 -
55 55  * Support LoRaWAN v1.0.4 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
... ... @@ -62,8 +62,9 @@
62 62  * Firmware upgradable via UART interface
63 63  * Ultra-long RF range
64 64  
65 -== 1.3  Specification ==
66 66  
33 +== Specification ==
34 +
67 67  * CPU: 32-bit 48 MHz
68 68  * Flash: 256KB
69 69  * RAM: 64KB
... ... @@ -82,77 +82,52 @@
82 82  * LoRa Rx current: <9 mA
83 83  * I/O Voltage: 3.3v
84 84  
85 -== 1.4  AT Command ==
53 +== AT Command ==
86 86  
87 -
88 88  AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
89 89  
90 90  
58 +== Dimension ==
91 91  
92 -== 1.5  Dimension ==
60 +[[image:image-20220517072526-1.png]]
93 93  
94 -[[image:image-20220718094750-3.png]]
95 95  
63 +== Pin Mapping ==
96 96  
65 +[[image:image-20220523101537-1.png]]
97 97  
98 -== 1.6  Pin Mapping ==
67 +== Land Pattern ==
99 99  
100 -[[image:image-20220720111850-1.png]]
101 -
102 -
103 -
104 -== 1.7  Land Pattern ==
105 -
106 106  [[image:image-20220517072821-2.png]]
107 107  
108 108  
72 +== Part Number ==
109 109  
110 -= 2.  LA66 LoRaWAN Shield =
74 +Part Number: **LA66-XXX**
111 111  
76 +**XX**: The default frequency band
112 112  
113 -== 2.1  Overview ==
78 +* **AS923**: LoRaWAN AS923 band
79 +* **AU915**: LoRaWAN AU915 band
80 +* **EU433**: LoRaWAN EU433 band
81 +* **EU868**: LoRaWAN EU868 band
82 +* **KR920**: LoRaWAN KR920 band
83 +* **US915**: LoRaWAN US915 band
84 +* **IN865**: LoRaWAN IN865 band
85 +* **CN470**: LoRaWAN CN470 band
86 +* **PP**: Peer to Peer LoRa Protocol
114 114  
115 115  
116 -(((
117 -[[image:image-20220715000826-2.png||height="145" width="220"]]
118 -)))
119 119  
120 -(((
121 -
122 -)))
90 += LA66 LoRaWAN Shield =
123 123  
124 -(((
125 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
126 -)))
92 +== Overview ==
127 127  
128 -(((
129 -(((
130 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
131 -)))
132 -)))
94 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
133 133  
134 -(((
135 -(((
136 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
137 -)))
138 -)))
139 139  
140 -(((
141 -(((
142 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
143 -)))
144 -)))
97 +== Features ==
145 145  
146 -(((
147 -(((
148 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
149 -)))
150 -)))
151 -
152 -
153 -
154 -== 2.2  Features ==
155 -
156 156  * Arduino Shield base on LA66 LoRaWAN module
157 157  * Support LoRaWAN v1.0.4 protocol
158 158  * Support peer-to-peer protocol
... ... @@ -164,8 +164,9 @@
164 164  * Firmware upgradable via UART interface
165 165  * Ultra-long RF range
166 166  
167 -== 2.3  Specification ==
168 168  
111 +== Specification ==
112 +
169 169  * CPU: 32-bit 48 MHz
170 170  * Flash: 256KB
171 171  * RAM: 64KB
... ... @@ -184,531 +184,183 @@
184 184  * LoRa Rx current: <9 mA
185 185  * I/O Voltage: 3.3v
186 186  
187 -== 2.4  LED ==
188 188  
132 +== Pin Mapping & LED ==
189 189  
190 -~1. The LED lights up red when there is an upstream data packet
191 -2. When the network is successfully connected, the green light will be on for 5 seconds
192 -3. Purple light on when receiving downlink data packets
134 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
193 193  
136 +== Example: Join TTN network and send an uplink message, get downlink message. ==
194 194  
138 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
195 195  
196 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
140 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
197 197  
142 +=== what needs to be used ===
198 198  
199 -**Show connection diagram：**
144 +1.LA66 LoRaWAN Shield that needs to be upgraded
200 200  
146 +2.Arduino
201 201  
202 -[[image:image-20220723170210-2.png||height="908" width="681"]]
148 +3.USB TO TTL
203 203  
150 +[[image:image-20220602100052-2.png]]
204 204  
152 +=== Wiring Schematic ===
205 205  
206 -(% style="color:blue" %)**1.  open Arduino IDE**
154 +[[image:image-20220602101311-3.png]]
207 207  
156 +LA66 LoRaWAN Shield  >>>>>>>>>>>>USB TTL
208 208  
209 -[[image:image-20220723170545-4.png]]
158 +GND  >>>>>>>>>>>>GND
210 210  
160 +TXD  >>>>>>>>>>>>TXD
211 211  
162 +RXD  >>>>>>>>>>>>RXD
212 212  
213 -(% style="color:blue" %)**2.  Open project**
164 +JP6 of LA66 LoRaWAN Shield needs to be connected with yellow jumper cap
214 214  
166 +Connect to the PC after connecting the wires
215 215  
216 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
168 +[[image:image-20220602102240-4.png]]
217 217  
170 +=== Upgrade steps ===
218 218  
172 +==== Dial the SW1 of the LA66 LoRaWAN Shield to the ISP's location as shown in the figure below ====
219 219  
220 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
174 +[[image:image-20220602102824-5.png]]
221 221  
176 +==== Press the RST switch on the LA66 LoRaWAN Shield once ====
222 222  
178 +[[image:image-20220602104701-12.png]]
223 223  
224 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
180 +==== Open the upgrade application software ====
225 225  
182 +Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
226 226  
227 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
228 -
229 -
230 -
231 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
232 -
233 -
234 -(% style="color:blue" %)**1.  Open project**
235 -
236 -
237 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
238 -
239 -
240 -[[image:image-20220723172502-8.png]]
241 -
242 -
243 -
244 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
245 -
246 -
247 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
248 -
249 -
250 -
251 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
252 -
253 -
254 -(% style="color:blue" %)**1.  Open project**
255 -
256 -
257 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
258 -
259 -
260 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
261 -
262 -
263 -
264 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
265 -
266 -
267 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
268 -
269 -
270 -
271 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
272 -
273 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
274 -
275 -[[image:image-20220723175700-12.png||height="602" width="995"]]
276 -
277 -
278 -
279 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
280 -
281 -
282 -=== 2.8.1  Items needed for update ===
283 -
284 -
285 -1. LA66 LoRaWAN Shield
286 -1. Arduino
287 -1. USB TO TTL Adapter
288 -
289 -[[image:image-20220602100052-2.png||height="385" width="600"]]
290 -
291 -
292 -=== 2.8.2  Connection ===
293 -
294 -
295 -[[image:image-20220602101311-3.png||height="276" width="600"]]
296 -
297 -
298 -(((
299 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
300 -)))
301 -
302 -(((
303 -(% style="background-color:yellow" %)**GND  <-> GND
304 -TXD  <->  TXD
305 -RXD  <->  RXD**
306 -)))
307 -
308 -
309 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
310 -
311 -Connect USB TTL Adapter to PC after connecting the wires
312 -
313 -
314 -[[image:image-20220602102240-4.png||height="304" width="600"]]
315 -
316 -
317 -=== 2.8.3  Upgrade steps ===
318 -
319 -
320 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
321 -
322 -
323 -[[image:image-20220602102824-5.png||height="306" width="600"]]
324 -
325 -
326 -
327 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
328 -
329 -
330 -[[image:image-20220602104701-12.png||height="285" width="600"]]
331 -
332 -
333 -
334 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
335 -
336 -
337 -(((
338 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
339 -)))
340 -
341 -
342 342  [[image:image-20220602103227-6.png]]
343 343  
344 -
345 345  [[image:image-20220602103357-7.png]]
346 346  
188 +===== Select the COM port corresponding to USB TTL =====
347 347  
348 -
349 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
350 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
351 -
352 -
353 353  [[image:image-20220602103844-8.png]]
354 354  
192 +===== Select the bin file to burn =====
355 355  
356 -
357 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
358 -(% style="color:blue" %)**3. Select the bin file to burn**
359 -
360 -
361 361  [[image:image-20220602104144-9.png]]
362 362  
363 -
364 364  [[image:image-20220602104251-10.png]]
365 365  
366 -
367 367  [[image:image-20220602104402-11.png]]
368 368  
200 +===== Click to start the download =====
369 369  
370 -
371 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
372 -(% style="color:blue" %)**4. Click to start the download**
373 -
374 374  [[image:image-20220602104923-13.png]]
375 375  
204 +===== The following figure appears to prove that the burning is in progress =====
376 376  
377 -
378 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
379 -(% style="color:blue" %)**5. Check update process**
380 -
381 -
382 382  [[image:image-20220602104948-14.png]]
383 383  
208 +===== The following picture appears to prove that the burning is successful =====
384 384  
385 -
386 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
387 -(% style="color:blue" %)**The following picture shows that the burning is successful**
388 -
389 389  [[image:image-20220602105251-15.png]]
390 390  
212 += LA66 USB LoRaWAN Adapter =
391 391  
214 +LA66 USB LoRaWAN Adapter is the USB Adapter for LA66, it combines a USB TTL Chip and LA66 module which can easy to test the LoRaWAN feature by using PC or embedded device which has USB Interface.
392 392  
393 -= 3.  LA66 USB LoRaWAN Adapter =
216 +Before use, please make sure that the computer has installed the CP2102 driver
394 394  
218 +== Pin Mapping & LED ==
395 395  
396 -== 3.1  Overview ==
220 +== Example Send & Get Messages via LoRaWAN in PC ==
397 397  
222 +Connect the LA66 LoRa Shield to the PC
398 398  
399 -[[image:image-20220715001142-3.png||height="145" width="220"]]
224 +[[image:image-20220602171217-1.png||height="615" width="915"]]
400 400  
401 -
402 -(((
403 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
404 -)))
405 -
406 -(((
407 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
408 -)))
409 -
410 -(((
411 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
412 -)))
413 -
414 -(((
415 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
416 -)))
417 -
418 -(((
419 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
420 -)))
421 -
422 -
423 -
424 -== 3.2  Features ==
425 -
426 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
427 -* Ultra-long RF range
428 -* Support LoRaWAN v1.0.4 protocol
429 -* Support peer-to-peer protocol
430 -* TCXO crystal to ensure RF performance on low temperature
431 -* Spring RF antenna
432 -* Available in different frequency LoRaWAN frequency bands.
433 -* World-wide unique OTAA keys.
434 -* AT Command via UART-TTL interface
435 -* Firmware upgradable via UART interface
436 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
437 -
438 -== 3.3  Specification ==
439 -
440 -* CPU: 32-bit 48 MHz
441 -* Flash: 256KB
442 -* RAM: 64KB
443 -* Input Power Range: 5v
444 -* Frequency Range: 150 MHz ~~ 960 MHz
445 -* Maximum Power +22 dBm constant RF output
446 -* High sensitivity: -148 dBm
447 -* Temperature:
448 -** Storage: -55 ~~ +125℃
449 -** Operating: -40 ~~ +85℃
450 -* Humidity:
451 -** Storage: 5 ~~ 95% (Non-Condensing)
452 -** Operating: 10 ~~ 95% (Non-Condensing)
453 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
454 -* LoRa Rx current: <9 mA
455 -
456 -== 3.4  Pin Mapping & LED ==
457 -
458 -
459 -
460 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
461 -
462 -
463 -(((
464 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
465 -)))
466 -
467 -
468 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
469 -
470 -
471 -[[image:image-20220723100027-1.png]]
472 -
473 -
474 474  Open the serial port tool
475 475  
476 476  [[image:image-20220602161617-8.png]]
477 477  
478 -[[image:image-20220602161718-9.png||height="457" width="800"]]
230 +[[image:image-20220602161718-9.png||height="529" width="927"]]
479 479  
232 +Press the reset switch RST on the LA66 LoRa Shield.
480 480  
234 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
481 481  
482 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
236 +[[image:image-20220602161935-10.png]]
483 483  
484 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
238 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
485 485  
486 -
487 -[[image:image-20220602161935-10.png||height="498" width="800"]]
488 -
489 -
490 -
491 -(% style="color:blue" %)**3. See Uplink Command**
492 -
493 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
494 -
495 495  example: AT+SENDB=01,02,8,05820802581ea0a5
496 496  
497 -[[image:image-20220602162157-11.png||height="497" width="800"]]
242 +[[image:image-20220602162157-11.png]]
498 498  
244 +Check to see if TTN received the message
499 499  
246 +[[image:image-20220602162331-12.png||height="547" width="1044"]]
500 500  
501 -(% style="color:blue" %)**4. Check to see if TTN received the message**
248 +== Example Send & Get Messages via LoRaWAN in RPi ==
502 502  
503 -[[image:image-20220602162331-12.png||height="420" width="800"]]
250 +Connect the LA66 LoRa Shield to the RPI
504 504  
252 +[[image:image-20220602171233-2.png||height="592" width="881"]]
505 505  
254 +Log in to the RPI's terminal and connect to the serial port
506 506  
507 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
256 +[[image:image-20220602153146-3.png]]
508 508  
258 +Press the reset switch RST on the LA66 LoRa Shield.
259 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
509 509  
510 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
261 +[[image:image-20220602154928-5.png]]
511 511  
512 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
263 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
513 513  
514 -(% style="color:red" %)**Preconditions:**
515 -
516 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
517 -
518 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
519 -
520 -
521 -
522 -(% style="color:blue" %)**Steps for usage:**
523 -
524 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
525 -
526 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
527 -
528 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
529 -
530 -
531 -
532 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
533 -
534 -
535 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
536 -
537 -
538 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
539 -
540 -[[image:image-20220723100439-2.png]]
541 -
542 -
543 -
544 -(% style="color:blue" %)**2. Install Minicom in RPi.**
545 -
546 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
547 -
548 - (% style="background-color:yellow" %)**apt update**
549 -
550 - (% style="background-color:yellow" %)**apt install minicom**
551 -
552 -
553 -Use minicom to connect to the RPI's terminal
554 -
555 -[[image:image-20220602153146-3.png||height="439" width="500"]]
556 -
557 -
558 -
559 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
560 -
561 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
562 -
563 -
564 -[[image:image-20220602154928-5.png||height="436" width="500"]]
565 -
566 -
567 -
568 -(% style="color:blue" %)**4. Send Uplink message**
569 -
570 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
571 -
572 572  example: AT+SENDB=01,02,8,05820802581ea0a5
573 573  
267 +[[image:image-20220602160339-6.png]]
574 574  
575 -[[image:image-20220602160339-6.png||height="517" width="600"]]
576 -
577 -
578 -
579 579  Check to see if TTN received the message
580 580  
581 -[[image:image-20220602160627-7.png||height="369" width="800"]]
271 +[[image:image-20220602160627-7.png||height="468" width="1013"]]
582 582  
273 +=== Install Minicom ===
583 583  
275 +Enter the following command in the RPI terminal
584 584  
585 -== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
277 +apt update
586 586  
279 +[[image:image-20220602143155-1.png]]
587 587  
588 -=== 3.8.1 DRAGINO-LA66-APP ===
281 +apt install minicom
589 589  
283 +[[image:image-20220602143744-2.png]]
590 590  
591 -[[image:image-20220723102027-3.png]]
285 +=== Send PC's CPU/RAM usage to TTN via script. ===
592 592  
287 +==== Take python as an example： ====
593 593  
289 +===== Preconditions: =====
594 594  
595 -==== (% style="color:blue" %)**Overview：**(%%) ====
291 +1.LA66 USB LoRaWAN Adapter works fine
596 596  
293 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
597 597  
598 -DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
295 +===== Steps for usage =====
599 599  
600 -View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
297 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
601 601  
299 +2.Run the script and see the TTN
602 602  
301 +[[image:image-20220602115852-3.png]]
603 603  
604 -==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
605 605  
606 606  
607 -Requires a type-c to USB adapter
305 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
608 608  
609 -[[image:image-20220723104754-4.png]]
610 610  
308 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
611 611  
612 -
613 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
614 -
615 -
616 -Function and page introduction
617 -
618 -[[image:image-20220723113448-7.png||height="1481" width="670"]]
619 -
620 -1.Display LA66 USB LoRaWAN Module connection status
621 -
622 -2.Check and reconnect
623 -
624 -3.Turn send timestamps on or off
625 -
626 -4.Display LoRaWan connection status
627 -
628 -5.Check LoRaWan connection status
629 -
630 -6.The RSSI value of the node when the ACK is received
631 -
632 -7.Node's Signal Strength Icon
633 -
634 -8.Set the packet sending interval of the node in seconds
635 -
636 -9.AT command input box
637 -
638 -10.Send AT command button
639 -
640 -11.Node log box
641 -
642 -12.clear log button
643 -
644 -13.exit button
645 -
646 -
647 -LA66 USB LoRaWAN Module not connected
648 -
649 -[[image:image-20220723110520-5.png||height="903" width="677"]]
650 -
651 -
652 -
653 -Connect LA66 USB LoRaWAN Module
654 -
655 -[[image:image-20220723110626-6.png||height="906" width="680"]]
656 -
657 -
658 -
659 -=== 3.8.2  Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
660 -
661 -
662 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
663 -
664 -[[image:image-20220723134549-8.png]]
665 -
666 -
667 -
668 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
669 -
670 -Sample JSON file please go to this link to download：放置JSON文件的链接
671 -
672 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
673 -
674 -The following is the positioning effect map
675 -
676 -[[image:image-20220723144339-1.png]]
677 -
678 -
679 -
680 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
681 -
682 -
683 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
684 -
685 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
686 -
687 -[[image:image-20220723150132-2.png]]
688 -
689 -
690 -
691 -= 4.  Order Info =
692 -
693 -
694 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
695 -
696 -
697 -(% style="color:blue" %)**XXX**(%%): The default frequency band
698 -
699 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
700 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
701 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
702 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
703 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
704 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
705 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
706 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
707 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
708 -
709 -
710 -
711 -= 5.  Reference =
712 -
713 -
714 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
310 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0