Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 134.6 >
edited by Xiaoling
on 2022/07/26 10:41
To version < 83.1 >
edited by Edwin Chen
on 2022/07/10 22:05
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,57 +1,24 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 -
11 -
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 -
14 -
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 25  (% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 -)))
27 -)))
28 28  
29 -(((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 -)))
33 -)))
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
34 34  
35 -(((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 -)))
39 39  
40 -(((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 -)))
43 -)))
44 44  
45 -(((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 -)))
49 -)))
50 50  
51 51  
20 +== Features ==
52 52  
53 -== 1.2  Features ==
54 -
55 55  * Support LoRaWAN v1.0.4 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
... ... @@ -62,10 +62,8 @@
62 62  * Firmware upgradable via UART interface
63 63  * Ultra-long RF range
64 64  
32 +== Specification ==
65 65  
66 -
67 -== 1.3  Specification ==
68 -
69 69  * CPU: 32-bit 48 MHz
70 70  * Flash: 256KB
71 71  * RAM: 64KB
... ... @@ -84,79 +84,50 @@
84 84  * LoRa Rx current: <9 mA
85 85  * I/O Voltage: 3.3v
86 86  
52 +== AT Command ==
87 87  
88 -
89 -== 1.4  AT Command ==
90 -
91 -
92 92  AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
93 93  
94 94  
57 +== Dimension ==
95 95  
96 -== 1.5  Dimension ==
59 +[[image:image-20220517072526-1.png]]
97 97  
98 -[[image:image-20220718094750-3.png]]
99 99  
62 +== Pin Mapping ==
100 100  
64 +[[image:image-20220523101537-1.png]]
101 101  
102 -== 1.6  Pin Mapping ==
66 +== Land Pattern ==
103 103  
104 -[[image:image-20220720111850-1.png]]
105 -
106 -
107 -
108 -== 1.7  Land Pattern ==
109 -
110 110  [[image:image-20220517072821-2.png]]
111 111  
112 112  
71 +== Order Info ==
113 113  
114 -= 2.  LA66 LoRaWAN Shield =
73 +Part Number: **LA66-XXX**
115 115  
75 +**XX**: The default frequency band
116 116  
117 -== 2.1  Overview ==
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
118 118  
87 += LA66 LoRaWAN Shield =
119 119  
120 -(((
121 -[[image:image-20220715000826-2.png||height="145" width="220"]]
122 -)))
89 +== Overview ==
123 123  
124 -(((
125 -
126 -)))
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
127 127  
128 -(((
129 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
130 -)))
131 131  
132 -(((
133 -(((
134 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
135 -)))
136 -)))
94 +== Features ==
137 137  
138 -(((
139 -(((
140 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
141 -)))
142 -)))
143 -
144 -(((
145 -(((
146 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
147 -)))
148 -)))
149 -
150 -(((
151 -(((
152 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
153 -)))
154 -)))
155 -
156 -
157 -
158 -== 2.2  Features ==
159 -
160 160  * Arduino Shield base on LA66 LoRaWAN module
161 161  * Support LoRaWAN v1.0.4 protocol
162 162  * Support peer-to-peer protocol
... ... @@ -168,10 +168,8 @@
168 168  * Firmware upgradable via UART interface
169 169  * Ultra-long RF range
170 170  
107 +== Specification ==
171 171  
172 -
173 -== 2.3  Specification ==
174 -
175 175  * CPU: 32-bit 48 MHz
176 176  * Flash: 256KB
177 177  * RAM: 64KB
... ... @@ -190,106 +190,18 @@
190 190  * LoRa Rx current: <9 mA
191 191  * I/O Voltage: 3.3v
192 192  
127 +== Pin Mapping & LED ==
193 193  
129 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
194 194  
195 -== 2.4  LED ==
131 +== Example: Join TTN network and send an uplink message, get downlink message. ==
196 196  
133 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
197 197  
198 -~1. The LED lights up red when there is an upstream data packet
199 -2. When the network is successfully connected, the green light will be on for 5 seconds
200 -3. Purple light on when receiving downlink data packets
135 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
201 201  
137 +=== Items needed for update ===
202 202  
203 -
204 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
205 -
206 -
207 -**Show connection diagram：**
208 -
209 -
210 -[[image:image-20220723170210-2.png||height="908" width="681"]]
211 -
212 -
213 -
214 -(% style="color:blue" %)**1.  open Arduino IDE**
215 -
216 -
217 -[[image:image-20220723170545-4.png]]
218 -
219 -
220 -
221 -(% style="color:blue" %)**2.  Open project**
222 -
223 -
224 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
225 -
226 -
227 -
228 -
229 -(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
230 -
231 -
232 -
233 -(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
234 -
235 -
236 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
237 -
238 -
239 -
240 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
241 -
242 -
243 -(% style="color:blue" %)**1.  Open project**
244 -
245 -
246 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
247 -
248 -[[image:image-20220723172502-8.png]]
249 -
250 -
251 -
252 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
253 -
254 -
255 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
256 -
257 -
258 -
259 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
260 -
261 -
262 -(% style="color:blue" %)**1.  Open project**
263 -
264 -
265 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
266 -
267 -
268 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
269 -
270 -
271 -
272 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
273 -
274 -
275 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
276 -
277 -
278 -
279 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
280 -
281 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
282 -
283 -[[image:image-20220723175700-12.png||height="602" width="995"]]
284 -
285 -
286 -
287 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
288 -
289 -
290 -=== 2.8.1  Items needed for update ===
291 -
292 -
293 293  1. LA66 LoRaWAN Shield
294 294  1. Arduino
295 295  1. USB TO TTL Adapter
... ... @@ -297,23 +297,15 @@
297 297  [[image:image-20220602100052-2.png||height="385" width="600"]]
298 298  
299 299  
300 -=== 2.8.2  Connection ===
146 +=== Connection ===
301 301  
302 -
303 303  [[image:image-20220602101311-3.png||height="276" width="600"]]
304 304  
150 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 +**GND  <-> GND
152 +TXD  <-> TXD
153 +RXD  <-> RXD**
305 305  
306 -(((
307 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
308 -)))
309 -
310 -(((
311 -(% style="background-color:yellow" %)**GND  <-> GND
312 -TXD  <->  TXD
313 -RXD  <->  RXD**
314 -)))
315 -
316 -
317 317  Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
318 318  
319 319  Connect USB TTL Adapter to PC after connecting the wires
... ... @@ -322,115 +322,91 @@
322 322  [[image:image-20220602102240-4.png||height="304" width="600"]]
323 323  
324 324  
325 -=== 2.8.3  Upgrade steps ===
163 +=== Upgrade steps ===
326 326  
165 +==== Switch SW1 to put in ISP position ====
327 327  
328 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
329 -
330 -
331 331  [[image:image-20220602102824-5.png||height="306" width="600"]]
332 332  
333 333  
170 +==== Press the RST switch once ====
334 334  
335 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
336 -
337 -
338 338  [[image:image-20220602104701-12.png||height="285" width="600"]]
339 339  
340 340  
175 +==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
341 341  
342 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
177 +**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
343 343  
344 -
345 -(((
346 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
347 -)))
348 -
349 -
350 350  [[image:image-20220602103227-6.png]]
351 351  
352 -
353 353  [[image:image-20220602103357-7.png]]
354 354  
355 355  
356 -
357 357  (% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
358 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
185 +**2. Select the COM port corresponding to USB TTL**
359 359  
360 -
361 361  [[image:image-20220602103844-8.png]]
362 362  
363 363  
364 -
365 365  (% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
366 -(% style="color:blue" %)**3. Select the bin file to burn**
191 +**3. Select the bin file to burn**
367 367  
368 -
369 369  [[image:image-20220602104144-9.png]]
370 370  
371 -
372 372  [[image:image-20220602104251-10.png]]
373 373  
374 -
375 375  [[image:image-20220602104402-11.png]]
376 376  
377 377  
378 -
379 379  (% class="wikigeneratedid" id="HClicktostartthedownload" %)
380 -(% style="color:blue" %)**4. Click to start the download**
201 +**4. Click to start the download**
381 381  
382 382  [[image:image-20220602104923-13.png]]
383 383  
384 384  
385 -
386 386  (% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
387 -(% style="color:blue" %)**5. Check update process**
207 +**5. Check update process**
388 388  
389 -
390 390  [[image:image-20220602104948-14.png]]
391 391  
392 392  
393 -
394 394  (% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
395 -(% style="color:blue" %)**The following picture shows that the burning is successful**
213 +**The following picture shows that the burning is successful**
396 396  
397 397  [[image:image-20220602105251-15.png]]
398 398  
399 399  
218 +== Order Info ==
400 400  
401 -= 3.  LA66 USB LoRaWAN Adapter =
220 +Part Number: **LA66-LoRaWAN-Shield-XXX**
402 402  
222 +**XX**: The default frequency band
403 403  
404 -== 3.1  Overview ==
224 +* **AS923**: LoRaWAN AS923 band
225 +* **AU915**: LoRaWAN AU915 band
226 +* **EU433**: LoRaWAN EU433 band
227 +* **EU868**: LoRaWAN EU868 band
228 +* **KR920**: LoRaWAN KR920 band
229 +* **US915**: LoRaWAN US915 band
230 +* **IN865**: LoRaWAN IN865 band
231 +* **CN470**: LoRaWAN CN470 band
232 +* **PP**: Peer to Peer LoRa Protocol
405 405  
234 +== Package Info ==
406 406  
407 -[[image:image-20220715001142-3.png||height="145" width="220"]]
236 +* LA66 LoRaWAN Shield x 1
237 +* RF Antenna x 1
408 408  
239 += LA66 USB LoRaWAN Adapter =
409 409  
410 -(((
411 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
412 -)))
241 +== Overview ==
413 413  
414 -(((
415 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
416 -)))
243 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
417 417  
418 -(((
419 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
420 -)))
421 421  
422 -(((
423 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
424 -)))
246 +== Features ==
425 425  
426 -(((
427 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
428 -)))
429 -
430 -
431 -
432 -== 3.2  Features ==
433 -
434 434  * LoRaWAN USB adapter base on LA66 LoRaWAN module
435 435  * Ultra-long RF range
436 436  * Support LoRaWAN v1.0.4 protocol
... ... @@ -441,11 +441,9 @@
441 441  * World-wide unique OTAA keys.
442 442  * AT Command via UART-TTL interface
443 443  * Firmware upgradable via UART interface
444 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
445 445  
259 +== Specification ==
446 446  
447 -== 3.3  Specification ==
448 -
449 449  * CPU: 32-bit 48 MHz
450 450  * Flash: 256KB
451 451  * RAM: 64KB
... ... @@ -462,25 +462,16 @@
462 462  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
463 463  * LoRa Rx current: <9 mA
464 464  
277 +== Pin Mapping & LED ==
465 465  
466 -== 3.4  Pin Mapping & LED ==
279 +== Example Send & Get Messages via LoRaWAN in PC ==
467 467  
468 -
469 -
470 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
471 -
472 -
473 -(((
474 474  Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
475 -)))
476 476  
283 +~1. Connect the LA66 USB LoRaWAN adapter to PC
477 477  
478 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
285 +[[image:image-20220602171217-1.png||height="538" width="800"]]
479 479  
480 -
481 -[[image:image-20220723100027-1.png]]
482 -
483 -
484 484  Open the serial port tool
485 485  
486 486  [[image:image-20220602161617-8.png]]
... ... @@ -488,76 +488,67 @@
488 488  [[image:image-20220602161718-9.png||height="457" width="800"]]
489 489  
490 490  
294 +2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
491 491  
492 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
493 -
494 494  The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
495 495  
496 -
497 497  [[image:image-20220602161935-10.png||height="498" width="800"]]
498 498  
499 499  
301 +3. See Uplink Command
500 500  
501 -(% style="color:blue" %)**3. See Uplink Command**
303 +Command format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
502 502  
503 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
504 -
505 505  example: AT+SENDB=01,02,8,05820802581ea0a5
506 506  
507 507  [[image:image-20220602162157-11.png||height="497" width="800"]]
508 508  
509 509  
310 +4. Check to see if TTN received the message
510 510  
511 -(% style="color:blue" %)**4. Check to see if TTN received the message**
512 -
513 513  [[image:image-20220602162331-12.png||height="420" width="800"]]
514 514  
515 515  
516 516  
517 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
316 +== (% id="cke_bm_637361S" style="display:none" %) (%%)Example: Send PC's CPU/RAM usage to TTN via python ==
518 518  
318 +(% class="wikigeneratedid" id="HUsepythonasanexampleFF1A" %)
319 +**Use python as an example：**
519 519  
520 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
321 +(% class="wikigeneratedid" id="HPreconditions:" %)
322 +**Preconditions:**
521 521  
522 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
324 +1.LA66 USB LoRaWAN Adapter works fine
523 523  
524 -(% style="color:red" %)**Preconditions:**
326 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
525 525  
526 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
328 +(% class="wikigeneratedid" id="HStepsforusage" %)
329 +**Steps for usage**
527 527  
528 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
331 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
529 529  
333 +2.Run the python script in PC and see the TTN
530 530  
531 -
532 -(% style="color:blue" %)**Steps for usage:**
533 -
534 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
535 -
536 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
537 -
538 538  [[image:image-20220602115852-3.png||height="450" width="1187"]]
539 539  
540 540  
541 541  
542 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
339 +== Example Send & Get Messages via LoRaWAN in RPi ==
543 543  
544 -
545 545  Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
546 546  
343 +~1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
547 547  
548 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
345 +[[image:image-20220602171233-2.png||height="538" width="800"]]
549 549  
550 -[[image:image-20220723100439-2.png]]
551 551  
348 +2. Install Minicom in RPi.
552 552  
553 -
554 -(% style="color:blue" %)**2. Install Minicom in RPi.**
555 -
556 556  (% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
557 557  
558 - (% style="background-color:yellow" %)**apt update**
352 +(% class="mark" %)apt update
559 559  
560 - (% style="background-color:yellow" %)**apt install minicom**
354 +(% class="mark" %)apt install minicom
561 561  
562 562  
563 563  Use minicom to connect to the RPI's terminal
... ... @@ -565,27 +565,20 @@
565 565  [[image:image-20220602153146-3.png||height="439" width="500"]]
566 566  
567 567  
362 +3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.
363 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
568 568  
569 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
570 -
571 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
572 -
573 -
574 574  [[image:image-20220602154928-5.png||height="436" width="500"]]
575 575  
576 576  
368 +4. Send Uplink message
577 577  
578 -(% style="color:blue" %)**4. Send Uplink message**
370 +Format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
579 579  
580 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
581 -
582 582  example: AT+SENDB=01,02,8,05820802581ea0a5
583 583  
584 -
585 585  [[image:image-20220602160339-6.png||height="517" width="600"]]
586 586  
587 -
588 -
589 589  Check to see if TTN received the message
590 590  
591 591  [[image:image-20220602160627-7.png||height="369" width="800"]]
... ... @@ -592,131 +592,35 @@
592 592  
593 593  
594 594  
595 -== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
382 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
596 596  
597 597  
598 -=== 3.8.1 DRAGINO-LA66-APP ===
385 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
599 599  
600 600  
601 -[[image:image-20220723102027-3.png]]
602 602  
389 +== Order Info ==
603 603  
391 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
604 604  
605 -==== (% style="color:blue" %)**Overview：**(%%) ====
393 +**XX**: The default frequency band
606 606  
395 +* **AS923**: LoRaWAN AS923 band
396 +* **AU915**: LoRaWAN AU915 band
397 +* **EU433**: LoRaWAN EU433 band
398 +* **EU868**: LoRaWAN EU868 band
399 +* **KR920**: LoRaWAN KR920 band
400 +* **US915**: LoRaWAN US915 band
401 +* **IN865**: LoRaWAN IN865 band
402 +* **CN470**: LoRaWAN CN470 band
403 +* **PP**: Peer to Peer LoRa Protocol
607 607  
608 -DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
405 +== Package Info ==
609 609  
610 -View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
407 +* LA66 USB LoRaWAN Adapter x 1
611 611  
409 += Reference =
612 612  
613 -
614 -==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
615 -
616 -
617 -Requires a type-c to USB adapter
618 -
619 -[[image:image-20220723104754-4.png]]
620 -
621 -
622 -
623 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
624 -
625 -
626 -Function and page introduction
627 -
628 -[[image:image-20220723113448-7.png||height="1481" width="670"]]
629 -
630 -1.Display LA66 USB LoRaWAN Module connection status
631 -
632 -2.Check and reconnect
633 -
634 -3.Turn send timestamps on or off
635 -
636 -4.Display LoRaWan connection status
637 -
638 -5.Check LoRaWan connection status
639 -
640 -6.The RSSI value of the node when the ACK is received
641 -
642 -7.Node's Signal Strength Icon
643 -
644 -8.Set the packet sending interval of the node in seconds
645 -
646 -9.AT command input box
647 -
648 -10.Send AT command button
649 -
650 -11.Node log box
651 -
652 -12.clear log button
653 -
654 -13.exit button
655 -
656 -
657 -LA66 USB LoRaWAN Module not connected
658 -
659 -[[image:image-20220723110520-5.png||height="903" width="677"]]
660 -
661 -
662 -
663 -Connect LA66 USB LoRaWAN Module
664 -
665 -[[image:image-20220723110626-6.png||height="906" width="680"]]
666 -
667 -
668 -
669 -=== 3.8.2 Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
670 -
671 -
672 -**1.  Register LA66 USB LoRaWAN Module to TTNV3**
673 -
674 -[[image:image-20220723134549-8.png]]
675 -
676 -
677 -
678 -**2.  Open Node-RED,And import the JSON file to generate the flow**
679 -
680 -Sample JSON file please go to this link to download：放置JSON文件的链接
681 -
682 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
683 -
684 -The following is the positioning effect map
685 -
686 -[[image:image-20220723144339-1.png]]
687 -
688 -
689 -
690 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
691 -
692 -
693 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
694 -
695 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
696 -
697 -[[image:image-20220723150132-2.png]]
698 -
699 -
700 -
701 -= 4.  Order Info =
702 -
703 -
704 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
705 -
706 -
707 -(% style="color:blue" %)**XXX**(%%): The default frequency band
708 -
709 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
710 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
711 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
712 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
713 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
714 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
715 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
716 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
717 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
718 -
719 -= 5.  Reference =
720 -
721 -
722 722  * Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
412 +
413 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0