Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 134.6 >
edited by Xiaoling
on 2022/07/26 10:41
To version < 164.1 >
edited by Edwin Chen
on 2022/09/24 13:40
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -6,118 +6,14 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
10 += 1.  LA66 LoRaWAN Shield =
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 13  
13 +== 1.1  Overview ==
14 14  
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 19  
20 20  (((
21 -
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 -)))
27 -)))
28 -
29 -(((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 -)))
33 -)))
34 -
35 -(((
36 -(((
37 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 -)))
39 -
40 -(((
41 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 -)))
43 -)))
44 -
45 -(((
46 -(((
47 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 -)))
49 -)))
50 -
51 -
52 -
53 -== 1.2  Features ==
54 -
55 -* Support LoRaWAN v1.0.4 protocol
56 -* Support peer-to-peer protocol
57 -* TCXO crystal to ensure RF performance on low temperature
58 -* SMD Antenna pad and i-pex antenna connector
59 -* Available in different frequency LoRaWAN frequency bands.
60 -* World-wide unique OTAA keys.
61 -* AT Command via UART-TTL interface
62 -* Firmware upgradable via UART interface
63 -* Ultra-long RF range
64 -
65 -
66 -
67 -== 1.3  Specification ==
68 -
69 -* CPU: 32-bit 48 MHz
70 -* Flash: 256KB
71 -* RAM: 64KB
72 -* Input Power Range: 1.8v ~~ 3.7v
73 -* Power Consumption: < 4uA.
74 -* Frequency Range: 150 MHz ~~ 960 MHz
75 -* Maximum Power +22 dBm constant RF output
76 -* High sensitivity: -148 dBm
77 -* Temperature:
78 -** Storage: -55 ~~ +125℃
79 -** Operating: -40 ~~ +85℃
80 -* Humidity:
81 -** Storage: 5 ~~ 95% (Non-Condensing)
82 -** Operating: 10 ~~ 95% (Non-Condensing)
83 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
84 -* LoRa Rx current: <9 mA
85 -* I/O Voltage: 3.3v
86 -
87 -
88 -
89 -== 1.4  AT Command ==
90 -
91 -
92 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
93 -
94 -
95 -
96 -== 1.5  Dimension ==
97 -
98 -[[image:image-20220718094750-3.png]]
99 -
100 -
101 -
102 -== 1.6  Pin Mapping ==
103 -
104 -[[image:image-20220720111850-1.png]]
105 -
106 -
107 -
108 -== 1.7  Land Pattern ==
109 -
110 -[[image:image-20220517072821-2.png]]
111 -
112 -
113 -
114 -= 2.  LA66 LoRaWAN Shield =
115 -
116 -
117 -== 2.1  Overview ==
118 -
119 -
120 -(((
121 121  [[image:image-20220715000826-2.png||height="145" width="220"]]
122 122  )))
123 123  
... ... @@ -155,10 +155,11 @@
155 155  
156 156  
157 157  
158 -== 2.2  Features ==
54 +== 1.2  Features ==
159 159  
56 +
160 160  * Arduino Shield base on LA66 LoRaWAN module
161 -* Support LoRaWAN v1.0.4 protocol
58 +* Support LoRaWAN v1.0.3 protocol
162 162  * Support peer-to-peer protocol
163 163  * TCXO crystal to ensure RF performance on low temperature
164 164  * SMA connector
... ... @@ -170,8 +170,9 @@
170 170  
171 171  
172 172  
173 -== 2.3  Specification ==
70 +== 1.3  Specification ==
174 174  
72 +
175 175  * CPU: 32-bit 48 MHz
176 176  * Flash: 256KB
177 177  * RAM: 64KB
... ... @@ -192,18 +192,25 @@
192 192  
193 193  
194 194  
195 -== 2.4  LED ==
93 +== 1.4  Pin Mapping & LED ==
196 196  
197 197  
96 +[[image:image-20220817085048-1.png||height="533" width="734"]]
97 +
98 +
99 +
198 198  ~1. The LED lights up red when there is an upstream data packet
199 199  2. When the network is successfully connected, the green light will be on for 5 seconds
200 200  3. Purple light on when receiving downlink data packets
201 201  
202 202  
105 +[[image:image-20220820112305-1.png||height="515" width="749"]]
203 203  
204 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
205 205  
206 206  
109 +== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
110 +
111 +
207 207  **Show connection diagram：**
208 208  
209 209  
... ... @@ -221,15 +221,20 @@
221 221  (% style="color:blue" %)**2.  Open project**
222 222  
223 223  
224 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
129 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
225 225  
226 226  
132 +[[image:image-20220726135239-1.png]]
227 227  
228 228  
135 +
229 229  (% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
230 230  
231 231  
139 +[[image:image-20220726135356-2.png]]
232 232  
141 +
142 +
233 233  (% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
234 234  
235 235  
... ... @@ -237,19 +237,20 @@
237 237  
238 238  
239 239  
240 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
150 +== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
241 241  
242 242  
243 243  (% style="color:blue" %)**1.  Open project**
244 244  
245 245  
246 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
156 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
247 247  
158 +
248 248  [[image:image-20220723172502-8.png]]
249 249  
250 250  
251 251  
252 -(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
163 +(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
253 253  
254 254  
255 255  [[image:image-20220723172938-9.png||height="652" width="1050"]]
... ... @@ -256,13 +256,13 @@
256 256  
257 257  
258 258  
259 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
170 +== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
260 260  
261 261  
262 262  (% style="color:blue" %)**1.  Open project**
263 263  
264 264  
265 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
176 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
266 266  
267 267  
268 268  [[image:image-20220723173341-10.png||height="581" width="1014"]]
... ... @@ -276,434 +276,214 @@
276 276  
277 277  
278 278  
279 -(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
280 280  
281 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
282 282  
283 -[[image:image-20220723175700-12.png||height="602" width="995"]]
192 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
284 284  
285 285  
195 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
286 286  
287 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
288 288  
198 +[[image:image-20220723175700-12.png||height="602" width="995"]]
289 289  
290 -=== 2.8.1  Items needed for update ===
291 291  
292 292  
293 -1. LA66 LoRaWAN Shield
294 -1. Arduino
295 -1. USB TO TTL Adapter
202 +== 1.8  Example: How to join helium ==
296 296  
297 -[[image:image-20220602100052-2.png||height="385" width="600"]]
298 298  
205 +(% style="color:blue" %)**1.  Create a new device.**
299 299  
300 -=== 2.8.2  Connection ===
301 301  
208 +[[image:image-20220907165500-1.png||height="464" width="940"]]
302 302  
303 -[[image:image-20220602101311-3.png||height="276" width="600"]]
304 304  
305 305  
306 -(((
307 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
308 -)))
212 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
309 309  
310 -(((
311 -(% style="background-color:yellow" %)**GND  <-> GND
312 -TXD  <->  TXD
313 -RXD  <->  RXD**
314 -)))
315 315  
215 +[[image:image-20220907165837-2.png||height="375" width="809"]]
316 316  
317 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
318 318  
319 -Connect USB TTL Adapter to PC after connecting the wires
320 320  
219 +(% style="color:blue" %)**3.  Use AT commands.**
321 321  
322 -[[image:image-20220602102240-4.png||height="304" width="600"]]
323 323  
222 +[[image:image-20220602100052-2.png||height="385" width="600"]]
324 324  
325 -=== 2.8.3  Upgrade steps ===
326 326  
327 327  
328 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
226 +(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
329 329  
330 330  
331 -[[image:image-20220602102824-5.png||height="306" width="600"]]
229 +[[image:image-20220907170308-3.png||height="556" width="617"]]
332 332  
333 333  
334 334  
335 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
233 +(% style="color:blue" %)**5.  Network successfully.**
336 336  
337 337  
338 -[[image:image-20220602104701-12.png||height="285" width="600"]]
236 +[[image:image-20220907170436-4.png]]
339 339  
340 340  
341 341  
342 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
240 +(% style="color:blue" %)**6.  Send uplink using command**
343 343  
344 344  
345 -(((
346 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
347 -)))
243 +[[image:image-20220912084334-1.png]]
348 348  
349 349  
350 -[[image:image-20220602103227-6.png]]
246 +[[image:image-20220912084412-3.png]]
351 351  
352 352  
353 -[[image:image-20220602103357-7.png]]
354 354  
250 +[[image:image-20220907170744-6.png||height="242" width="798"]]
355 355  
356 356  
357 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
358 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
359 359  
254 +== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
360 360  
361 -[[image:image-20220602103844-8.png]]
362 362  
257 +=== 1.9.1  Items needed for update ===
363 363  
364 364  
365 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
366 -(% style="color:blue" %)**3. Select the bin file to burn**
260 +1. LA66 LoRaWAN Shield
261 +1. Arduino
262 +1. USB TO TTL Adapter
367 367  
264 +[[image:image-20220602100052-2.png||height="385" width="600"]]
368 368  
369 -[[image:image-20220602104144-9.png]]
370 370  
371 371  
372 -[[image:image-20220602104251-10.png]]
268 +=== 1.9.2  Connection ===
373 373  
374 374  
375 -[[image:image-20220602104402-11.png]]
271 +[[image:image-20220602101311-3.png||height="276" width="600"]]
376 376  
377 377  
378 -
379 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
380 -(% style="color:blue" %)**4. Click to start the download**
381 -
382 -[[image:image-20220602104923-13.png]]
383 -
384 -
385 -
386 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
387 -(% style="color:blue" %)**5. Check update process**
388 -
389 -
390 -[[image:image-20220602104948-14.png]]
391 -
392 -
393 -
394 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
395 -(% style="color:blue" %)**The following picture shows that the burning is successful**
396 -
397 -[[image:image-20220602105251-15.png]]
398 -
399 -
400 -
401 -= 3.  LA66 USB LoRaWAN Adapter =
402 -
403 -
404 -== 3.1  Overview ==
405 -
406 -
407 -[[image:image-20220715001142-3.png||height="145" width="220"]]
408 -
409 -
410 410  (((
411 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
275 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
412 412  )))
413 413  
414 414  (((
415 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
279 +(% style="background-color:yellow" %)**GND  <-> GND
280 +TXD  <->  TXD
281 +RXD  <->  RXD**
416 416  )))
417 417  
418 -(((
419 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
420 -)))
421 421  
422 -(((
423 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
424 -)))
285 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
425 425  
426 -(((
427 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
428 -)))
287 +Connect USB TTL Adapter to PC after connecting the wires
429 429  
430 430  
290 +[[image:image-20220602102240-4.png||height="304" width="600"]]
431 431  
432 -== 3.2  Features ==
433 433  
434 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
435 -* Ultra-long RF range
436 -* Support LoRaWAN v1.0.4 protocol
437 -* Support peer-to-peer protocol
438 -* TCXO crystal to ensure RF performance on low temperature
439 -* Spring RF antenna
440 -* Available in different frequency LoRaWAN frequency bands.
441 -* World-wide unique OTAA keys.
442 -* AT Command via UART-TTL interface
443 -* Firmware upgradable via UART interface
444 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
445 445  
294 +=== 1.9.3  Upgrade steps ===
446 446  
447 -== 3.3  Specification ==
448 448  
449 -* CPU: 32-bit 48 MHz
450 -* Flash: 256KB
451 -* RAM: 64KB
452 -* Input Power Range: 5v
453 -* Frequency Range: 150 MHz ~~ 960 MHz
454 -* Maximum Power +22 dBm constant RF output
455 -* High sensitivity: -148 dBm
456 -* Temperature:
457 -** Storage: -55 ~~ +125℃
458 -** Operating: -40 ~~ +85℃
459 -* Humidity:
460 -** Storage: 5 ~~ 95% (Non-Condensing)
461 -** Operating: 10 ~~ 95% (Non-Condensing)
462 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
463 -* LoRa Rx current: <9 mA
464 464  
298 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
465 465  
466 -== 3.4  Pin Mapping & LED ==
467 467  
301 +[[image:image-20220602102824-5.png||height="306" width="600"]]
468 468  
469 469  
470 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
471 471  
472 472  
473 -(((
474 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
475 -)))
306 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
476 476  
477 477  
478 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
309 +[[image:image-20220817085447-1.png]]
479 479  
480 480  
481 -[[image:image-20220723100027-1.png]]
482 482  
483 483  
484 -Open the serial port tool
314 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
485 485  
486 -[[image:image-20220602161617-8.png]]
487 487  
488 -[[image:image-20220602161718-9.png||height="457" width="800"]]
489 489  
318 +(((
319 +(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
320 +)))
490 490  
491 491  
492 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
323 +[[image:image-20220602103227-6.png]]
493 493  
494 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
495 495  
326 +[[image:image-20220602103357-7.png]]
496 496  
497 -[[image:image-20220602161935-10.png||height="498" width="800"]]
498 498  
499 499  
330 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
331 +(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
500 500  
501 -(% style="color:blue" %)**3. See Uplink Command**
502 502  
503 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
334 +[[image:image-20220602103844-8.png]]
504 504  
505 -example: AT+SENDB=01,02,8,05820802581ea0a5
506 506  
507 -[[image:image-20220602162157-11.png||height="497" width="800"]]
508 508  
338 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
339 +(% style="color:blue" %)**3.  Select the bin file to burn**
509 509  
510 510  
511 -(% style="color:blue" %)**4. Check to see if TTN received the message**
342 +[[image:image-20220602104144-9.png]]
512 512  
513 -[[image:image-20220602162331-12.png||height="420" width="800"]]
514 514  
345 +[[image:image-20220602104251-10.png]]
515 515  
516 516  
517 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
348 +[[image:image-20220602104402-11.png]]
518 518  
519 519  
520 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
521 521  
522 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
352 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
353 +(% style="color:blue" %)**4.  Click to start the download**
523 523  
524 -(% style="color:red" %)**Preconditions:**
525 525  
526 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
356 +[[image:image-20220602104923-13.png]]
527 527  
528 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
529 529  
530 530  
360 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
361 +(% style="color:blue" %)**5.  Check update process**
531 531  
532 -(% style="color:blue" %)**Steps for usage:**
533 533  
534 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
364 +[[image:image-20220602104948-14.png]]
535 535  
536 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
537 537  
538 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
539 539  
368 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
369 +(% style="color:blue" %)**The following picture shows that the burning is successful**
540 540  
541 541  
542 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
372 +[[image:image-20220602105251-15.png]]
543 543  
544 544  
545 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
546 546  
376 += 2.  FAQ =
547 547  
548 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
549 549  
550 -[[image:image-20220723100439-2.png]]
379 +== 2.1  How to Compile Source Code for LA66? ==
551 551  
552 552  
382 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
553 553  
554 -(% style="color:blue" %)**2. Install Minicom in RPi.**
555 555  
556 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
385 +== 2.2 Where to find Peer-to-Peer firmware of LA66? ==
557 557  
558 - (% style="background-color:yellow" %)**apt update**
559 559  
560 - (% style="background-color:yellow" %)**apt install minicom**
388 +* [[Download>>https://www.dropbox.com/s/270gvm9ngaj0v02/LA66_P2P_v1.0.bin?dl=0]] Peer to Peer firmware.
389 +* [[Instruction for LA66 Peer to Peer firmware>>Instruction for LA66 Peer to Peer firmware]].
561 561  
562 562  
563 -Use minicom to connect to the RPI's terminal
392 += 3.  Order Info =
564 564  
565 -[[image:image-20220602153146-3.png||height="439" width="500"]]
566 566  
395 +**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
567 567  
568 568  
569 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
570 -
571 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
572 -
573 -
574 -[[image:image-20220602154928-5.png||height="436" width="500"]]
575 -
576 -
577 -
578 -(% style="color:blue" %)**4. Send Uplink message**
579 -
580 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
581 -
582 -example: AT+SENDB=01,02,8,05820802581ea0a5
583 -
584 -
585 -[[image:image-20220602160339-6.png||height="517" width="600"]]
586 -
587 -
588 -
589 -Check to see if TTN received the message
590 -
591 -[[image:image-20220602160627-7.png||height="369" width="800"]]
592 -
593 -
594 -
595 -== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
596 -
597 -
598 -=== 3.8.1 DRAGINO-LA66-APP ===
599 -
600 -
601 -[[image:image-20220723102027-3.png]]
602 -
603 -
604 -
605 -==== (% style="color:blue" %)**Overview：**(%%) ====
606 -
607 -
608 -DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
609 -
610 -View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
611 -
612 -
613 -
614 -==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
615 -
616 -
617 -Requires a type-c to USB adapter
618 -
619 -[[image:image-20220723104754-4.png]]
620 -
621 -
622 -
623 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
624 -
625 -
626 -Function and page introduction
627 -
628 -[[image:image-20220723113448-7.png||height="1481" width="670"]]
629 -
630 -1.Display LA66 USB LoRaWAN Module connection status
631 -
632 -2.Check and reconnect
633 -
634 -3.Turn send timestamps on or off
635 -
636 -4.Display LoRaWan connection status
637 -
638 -5.Check LoRaWan connection status
639 -
640 -6.The RSSI value of the node when the ACK is received
641 -
642 -7.Node's Signal Strength Icon
643 -
644 -8.Set the packet sending interval of the node in seconds
645 -
646 -9.AT command input box
647 -
648 -10.Send AT command button
649 -
650 -11.Node log box
651 -
652 -12.clear log button
653 -
654 -13.exit button
655 -
656 -
657 -LA66 USB LoRaWAN Module not connected
658 -
659 -[[image:image-20220723110520-5.png||height="903" width="677"]]
660 -
661 -
662 -
663 -Connect LA66 USB LoRaWAN Module
664 -
665 -[[image:image-20220723110626-6.png||height="906" width="680"]]
666 -
667 -
668 -
669 -=== 3.8.2 Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
670 -
671 -
672 -**1.  Register LA66 USB LoRaWAN Module to TTNV3**
673 -
674 -[[image:image-20220723134549-8.png]]
675 -
676 -
677 -
678 -**2.  Open Node-RED,And import the JSON file to generate the flow**
679 -
680 -Sample JSON file please go to this link to download：放置JSON文件的链接
681 -
682 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
683 -
684 -The following is the positioning effect map
685 -
686 -[[image:image-20220723144339-1.png]]
687 -
688 -
689 -
690 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
691 -
692 -
693 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
694 -
695 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
696 -
697 -[[image:image-20220723150132-2.png]]
698 -
699 -
700 -
701 -= 4.  Order Info =
702 -
703 -
704 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
705 -
706 -
707 707  (% style="color:blue" %)**XXX**(%%): The default frequency band
708 708  
709 709  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -716,7 +716,11 @@
716 716  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
717 717  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
718 718  
719 -= 5.  Reference =
720 720  
721 721  
722 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
412 += 4.  Reference =
413 +
414 +
415 +* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
416 +
417 +
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0