Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 134.5 >
edited by Xiaoling
on 2022/07/26 10:38
To version < 79.1 >
edited by Edwin Chen
on 2022/07/10 22:00
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,57 +1,24 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 -
11 -
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 -
14 -
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 25  (% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 -)))
27 -)))
28 28  
29 -(((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 -)))
33 -)))
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
34 34  
35 -(((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 -)))
39 39  
40 -(((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 -)))
43 -)))
44 44  
45 -(((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 -)))
49 -)))
50 50  
51 51  
20 +== Features ==
52 52  
53 -== 1.2  Features ==
54 -
55 55  * Support LoRaWAN v1.0.4 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
... ... @@ -62,11 +62,8 @@
62 62  * Firmware upgradable via UART interface
63 63  * Ultra-long RF range
64 64  
32 +== Specification ==
65 65  
66 -
67 -
68 -== 1.3  Specification ==
69 -
70 70  * CPU: 32-bit 48 MHz
71 71  * Flash: 256KB
72 72  * RAM: 64KB
... ... @@ -85,80 +85,50 @@
85 85  * LoRa Rx current: <9 mA
86 86  * I/O Voltage: 3.3v
87 87  
52 +== AT Command ==
88 88  
89 -
90 -
91 -== 1.4  AT Command ==
92 -
93 -
94 94  AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
95 95  
96 96  
57 +== Dimension ==
97 97  
98 -== 1.5  Dimension ==
59 +[[image:image-20220517072526-1.png]]
99 99  
100 -[[image:image-20220718094750-3.png]]
101 101  
62 +== Pin Mapping ==
102 102  
64 +[[image:image-20220523101537-1.png]]
103 103  
104 -== 1.6  Pin Mapping ==
66 +== Land Pattern ==
105 105  
106 -[[image:image-20220720111850-1.png]]
107 -
108 -
109 -
110 -== 1.7  Land Pattern ==
111 -
112 112  [[image:image-20220517072821-2.png]]
113 113  
114 114  
71 +== Order Info ==
115 115  
116 -= 2.  LA66 LoRaWAN Shield =
73 +Part Number: **LA66-XXX**
117 117  
75 +**XX**: The default frequency band
118 118  
119 -== 2.1  Overview ==
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
120 120  
87 += LA66 LoRaWAN Shield =
121 121  
122 -(((
123 -[[image:image-20220715000826-2.png||height="145" width="220"]]
124 -)))
89 +== Overview ==
125 125  
126 -(((
127 -
128 -)))
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
129 129  
130 -(((
131 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
132 -)))
133 133  
134 -(((
135 -(((
136 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
137 -)))
138 -)))
94 +== Features ==
139 139  
140 -(((
141 -(((
142 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
143 -)))
144 -)))
145 -
146 -(((
147 -(((
148 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
149 -)))
150 -)))
151 -
152 -(((
153 -(((
154 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
155 -)))
156 -)))
157 -
158 -
159 -
160 -== 2.2  Features ==
161 -
162 162  * Arduino Shield base on LA66 LoRaWAN module
163 163  * Support LoRaWAN v1.0.4 protocol
164 164  * Support peer-to-peer protocol
... ... @@ -170,11 +170,8 @@
170 170  * Firmware upgradable via UART interface
171 171  * Ultra-long RF range
172 172  
107 +== Specification ==
173 173  
174 -
175 -
176 -== 2.3  Specification ==
177 -
178 178  * CPU: 32-bit 48 MHz
179 179  * Flash: 256KB
180 180  * RAM: 64KB
... ... @@ -193,111 +193,18 @@
193 193  * LoRa Rx current: <9 mA
194 194  * I/O Voltage: 3.3v
195 195  
127 +== Pin Mapping & LED ==
196 196  
129 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
197 197  
131 +== Example: Join TTN network and send an uplink message, get downlink message. ==
198 198  
199 -== 2.4  LED ==
133 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
200 200  
135 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
201 201  
202 -~1. The LED lights up red when there is an upstream data packet
203 -2. When the network is successfully connected, the green light will be on for 5 seconds
204 -3. Purple light on when receiving downlink data packets
137 +=== Items needed for update ===
205 205  
206 -
207 -
208 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
209 -
210 -
211 -**Show connection diagram：**
212 -
213 -
214 -[[image:image-20220723170210-2.png||height="908" width="681"]]
215 -
216 -
217 -
218 -**1.  open Arduino IDE**
219 -
220 -
221 -[[image:image-20220723170545-4.png]]
222 -
223 -
224 -
225 -**2.  Open project**
226 -
227 -
228 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
229 -
230 -[[image:image-20220723170750-5.png||height="533" width="930"]]
231 -
232 -
233 -
234 -**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
235 -
236 -
237 -[[image:image-20220723171228-6.png]]
238 -
239 -
240 -
241 -**4.  After the upload is successful, open the serial port monitoring and send the AT command**
242 -
243 -
244 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
245 -
246 -
247 -
248 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
249 -
250 -
251 -**1.  Open project**
252 -
253 -
254 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
255 -
256 -[[image:image-20220723172502-8.png]]
257 -
258 -
259 -
260 -2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
261 -
262 -
263 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
264 -
265 -
266 -
267 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
268 -
269 -
270 -**1.  Open project**
271 -
272 -
273 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
274 -
275 -
276 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
277 -
278 -
279 -
280 -**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
281 -
282 -
283 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
284 -
285 -
286 -
287 -**3.  Integration into Node-red via TTNV3**
288 -
289 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
290 -
291 -[[image:image-20220723175700-12.png||height="602" width="995"]]
292 -
293 -
294 -
295 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
296 -
297 -
298 -=== 2.8.1  Items needed for update ===
299 -
300 -
301 301  1. LA66 LoRaWAN Shield
302 302  1. Arduino
303 303  1. USB TO TTL Adapter
... ... @@ -305,23 +305,15 @@
305 305  [[image:image-20220602100052-2.png||height="385" width="600"]]
306 306  
307 307  
308 -=== 2.8.2  Connection ===
146 +=== Connection ===
309 309  
310 -
311 311  [[image:image-20220602101311-3.png||height="276" width="600"]]
312 312  
150 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 +**GND  <-> GND
152 +TXD  <-> TXD
153 +RXD  <-> RXD**
313 313  
314 -(((
315 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
316 -)))
317 -
318 -(((
319 -(% style="background-color:yellow" %)**GND  <-> GND
320 -TXD  <->  TXD
321 -RXD  <->  RXD**
322 -)))
323 -
324 -
325 325  Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
326 326  
327 327  Connect USB TTL Adapter to PC after connecting the wires
... ... @@ -330,115 +330,91 @@
330 330  [[image:image-20220602102240-4.png||height="304" width="600"]]
331 331  
332 332  
333 -=== 2.8.3  Upgrade steps ===
163 +=== Upgrade steps ===
334 334  
165 +==== Switch SW1 to put in ISP position ====
335 335  
336 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
337 -
338 -
339 339  [[image:image-20220602102824-5.png||height="306" width="600"]]
340 340  
341 341  
170 +==== Press the RST switch once ====
342 342  
343 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
344 -
345 -
346 346  [[image:image-20220602104701-12.png||height="285" width="600"]]
347 347  
348 348  
175 +==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
349 349  
350 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
177 +**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
351 351  
352 -
353 -(((
354 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
355 -)))
356 -
357 -
358 358  [[image:image-20220602103227-6.png]]
359 359  
360 -
361 361  [[image:image-20220602103357-7.png]]
362 362  
363 363  
364 -
365 365  (% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
366 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
185 +**2. Select the COM port corresponding to USB TTL**
367 367  
368 -
369 369  [[image:image-20220602103844-8.png]]
370 370  
371 371  
372 -
373 373  (% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
374 -(% style="color:blue" %)**3. Select the bin file to burn**
191 +**3. Select the bin file to burn**
375 375  
376 -
377 377  [[image:image-20220602104144-9.png]]
378 378  
379 -
380 380  [[image:image-20220602104251-10.png]]
381 381  
382 -
383 383  [[image:image-20220602104402-11.png]]
384 384  
385 385  
386 -
387 387  (% class="wikigeneratedid" id="HClicktostartthedownload" %)
388 -(% style="color:blue" %)**4. Click to start the download**
201 +**4. Click to start the download**
389 389  
390 390  [[image:image-20220602104923-13.png]]
391 391  
392 392  
393 -
394 394  (% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
395 -(% style="color:blue" %)**5. Check update process**
207 +**5. Check update process**
396 396  
397 -
398 398  [[image:image-20220602104948-14.png]]
399 399  
400 400  
401 -
402 402  (% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
403 -(% style="color:blue" %)**The following picture shows that the burning is successful**
213 +**The following picture shows that the burning is successful**
404 404  
405 405  [[image:image-20220602105251-15.png]]
406 406  
407 407  
218 +== Order Info ==
408 408  
409 -= 3.  LA66 USB LoRaWAN Adapter =
220 +Part Number: **LA66-LoRaWAN-Shield-XXX**
410 410  
222 +**XX**: The default frequency band
411 411  
412 -== 3.1  Overview ==
224 +* **AS923**: LoRaWAN AS923 band
225 +* **AU915**: LoRaWAN AU915 band
226 +* **EU433**: LoRaWAN EU433 band
227 +* **EU868**: LoRaWAN EU868 band
228 +* **KR920**: LoRaWAN KR920 band
229 +* **US915**: LoRaWAN US915 band
230 +* **IN865**: LoRaWAN IN865 band
231 +* **CN470**: LoRaWAN CN470 band
232 +* **PP**: Peer to Peer LoRa Protocol
413 413  
234 +== Package Info ==
414 414  
415 -[[image:image-20220715001142-3.png||height="145" width="220"]]
236 +* LA66 LoRaWAN Shield x 1
237 +* RF Antenna x 1
416 416  
239 += LA66 USB LoRaWAN Adapter =
417 417  
418 -(((
419 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
420 -)))
241 +== Overview ==
421 421  
422 -(((
423 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
424 -)))
243 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
425 425  
426 -(((
427 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
428 -)))
429 429  
430 -(((
431 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
432 -)))
246 +== Features ==
433 433  
434 -(((
435 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
436 -)))
437 -
438 -
439 -
440 -== 3.2  Features ==
441 -
442 442  * LoRaWAN USB adapter base on LA66 LoRaWAN module
443 443  * Ultra-long RF range
444 444  * Support LoRaWAN v1.0.4 protocol
... ... @@ -449,12 +449,9 @@
449 449  * World-wide unique OTAA keys.
450 450  * AT Command via UART-TTL interface
451 451  * Firmware upgradable via UART interface
452 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
453 453  
259 +== Specification ==
454 454  
455 -
456 -== 3.3  Specification ==
457 -
458 458  * CPU: 32-bit 48 MHz
459 459  * Flash: 256KB
460 460  * RAM: 64KB
... ... @@ -471,26 +471,16 @@
471 471  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
472 472  * LoRa Rx current: <9 mA
473 473  
277 +== Pin Mapping & LED ==
474 474  
279 +== Example Send & Get Messages via LoRaWAN in PC ==
475 475  
476 -== 3.4  Pin Mapping & LED ==
477 -
478 -
479 -
480 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
481 -
482 -
483 -(((
484 484  Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
485 -)))
486 486  
283 +~1. Connect the LA66 USB LoRaWAN adapter to PC
487 487  
488 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
285 +[[image:image-20220602171217-1.png||height="538" width="800"]]
489 489  
490 -
491 -[[image:image-20220723100027-1.png]]
492 -
493 -
494 494  Open the serial port tool
495 495  
496 496  [[image:image-20220602161617-8.png]]
... ... @@ -498,76 +498,44 @@
498 498  [[image:image-20220602161718-9.png||height="457" width="800"]]
499 499  
500 500  
294 +2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
501 501  
502 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
503 -
504 504  The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
505 505  
506 -
507 507  [[image:image-20220602161935-10.png||height="498" width="800"]]
508 508  
509 509  
301 +3. See Uplink Command
510 510  
511 -(% style="color:blue" %)**3. See Uplink Command**
303 +Command format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
512 512  
513 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
514 -
515 515  example: AT+SENDB=01,02,8,05820802581ea0a5
516 516  
517 517  [[image:image-20220602162157-11.png||height="497" width="800"]]
518 518  
519 519  
310 +4. Check to see if TTN received the message
520 520  
521 -(% style="color:blue" %)**4. Check to see if TTN received the message**
522 -
523 523  [[image:image-20220602162331-12.png||height="420" width="800"]]
524 524  
525 525  
526 526  
527 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
316 +== Example Send & Get Messages via LoRaWAN in RPi ==
528 528  
529 -
530 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
531 -
532 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
533 -
534 -(% style="color:red" %)**Preconditions:**
535 -
536 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
537 -
538 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
539 -
540 -
541 -
542 -(% style="color:blue" %)**Steps for usage:**
543 -
544 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
545 -
546 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
547 -
548 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
549 -
550 -
551 -
552 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
553 -
554 -
555 555  Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
556 556  
320 +~1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
557 557  
558 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
322 +[[image:image-20220602171233-2.png||height="538" width="800"]]
559 559  
560 -[[image:image-20220723100439-2.png]]
561 561  
325 +2. Install Minicom in RPi.
562 562  
563 -
564 -(% style="color:blue" %)**2. Install Minicom in RPi.**
565 -
566 566  (% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
567 567  
568 - (% style="background-color:yellow" %)**apt update**
329 +(% class="mark" %)apt update
569 569  
570 - (% style="background-color:yellow" %)**apt install minicom**
331 +(% class="mark" %)apt install minicom
571 571  
572 572  
573 573  Use minicom to connect to the RPI's terminal
... ... @@ -575,27 +575,20 @@
575 575  [[image:image-20220602153146-3.png||height="439" width="500"]]
576 576  
577 577  
339 +3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.
340 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
578 578  
579 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
580 -
581 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
582 -
583 -
584 584  [[image:image-20220602154928-5.png||height="436" width="500"]]
585 585  
586 586  
345 +4. Send Uplink message
587 587  
588 -(% style="color:blue" %)**4. Send Uplink message**
347 +Format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
589 589  
590 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
591 -
592 592  example: AT+SENDB=01,02,8,05820802581ea0a5
593 593  
594 -
595 595  [[image:image-20220602160339-6.png||height="517" width="600"]]
596 596  
597 -
598 -
599 599  Check to see if TTN received the message
600 600  
601 601  [[image:image-20220602160627-7.png||height="369" width="800"]]
... ... @@ -602,132 +602,55 @@
602 602  
603 603  
604 604  
605 -== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
359 +=== Send PC's CPU/RAM usage to TTN via script. ===
606 606  
361 +==== Take python as an example： ====
607 607  
608 -=== 3.8.1 DRAGINO-LA66-APP ===
363 +===== Preconditions: =====
609 609  
365 +1.LA66 USB LoRaWAN Adapter works fine
610 610  
611 -[[image:image-20220723102027-3.png]]
367 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
612 612  
369 +===== Steps for usage =====
613 613  
371 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
614 614  
615 -==== (% style="color:blue" %)**Overview：**(%%) ====
373 +2.Run the script and see the TTN
616 616  
375 +[[image:image-20220602115852-3.png]]
617 617  
618 -DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
619 619  
620 -View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
621 621  
379 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
622 622  
623 623  
624 -==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
382 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
625 625  
626 626  
627 -Requires a type-c to USB adapter
628 628  
629 -[[image:image-20220723104754-4.png]]
386 +== Order Info ==
630 630  
388 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
631 631  
390 +**XX**: The default frequency band
632 632  
633 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
392 +* **AS923**: LoRaWAN AS923 band
393 +* **AU915**: LoRaWAN AU915 band
394 +* **EU433**: LoRaWAN EU433 band
395 +* **EU868**: LoRaWAN EU868 band
396 +* **KR920**: LoRaWAN KR920 band
397 +* **US915**: LoRaWAN US915 band
398 +* **IN865**: LoRaWAN IN865 band
399 +* **CN470**: LoRaWAN CN470 band
400 +* **PP**: Peer to Peer LoRa Protocol
634 634  
402 +== Package Info ==
635 635  
636 -Function and page introduction
404 +* LA66 USB LoRaWAN Adapter x 1
637 637  
638 -[[image:image-20220723113448-7.png||height="1481" width="670"]]
406 += Reference =
639 639  
640 -1.Display LA66 USB LoRaWAN Module connection status
641 -
642 -2.Check and reconnect
643 -
644 -3.Turn send timestamps on or off
645 -
646 -4.Display LoRaWan connection status
647 -
648 -5.Check LoRaWan connection status
649 -
650 -6.The RSSI value of the node when the ACK is received
651 -
652 -7.Node's Signal Strength Icon
653 -
654 -8.Set the packet sending interval of the node in seconds
655 -
656 -9.AT command input box
657 -
658 -10.Send AT command button
659 -
660 -11.Node log box
661 -
662 -12.clear log button
663 -
664 -13.exit button
665 -
666 -
667 -LA66 USB LoRaWAN Module not connected
668 -
669 -[[image:image-20220723110520-5.png||height="903" width="677"]]
670 -
671 -
672 -
673 -Connect LA66 USB LoRaWAN Module
674 -
675 -[[image:image-20220723110626-6.png||height="906" width="680"]]
676 -
677 -
678 -
679 -=== 3.8.2 Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
680 -
681 -
682 -**1.  Register LA66 USB LoRaWAN Module to TTNV3**
683 -
684 -[[image:image-20220723134549-8.png]]
685 -
686 -
687 -
688 -**2.  Open Node-RED,And import the JSON file to generate the flow**
689 -
690 -Sample JSON file please go to this link to download：放置JSON文件的链接
691 -
692 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
693 -
694 -The following is the positioning effect map
695 -
696 -[[image:image-20220723144339-1.png]]
697 -
698 -
699 -
700 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
701 -
702 -
703 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
704 -
705 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
706 -
707 -[[image:image-20220723150132-2.png]]
708 -
709 -
710 -
711 -= 4.  Order Info =
712 -
713 -
714 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
715 -
716 -
717 -(% style="color:blue" %)**XXX**(%%): The default frequency band
718 -
719 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
720 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
721 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
722 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
723 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
724 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
725 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
726 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
727 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
728 -
729 -
730 -= 5.  Reference =
731 -
732 -
733 733  * Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
409 +
410 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0