Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 134.5 >
edited by Xiaoling
on 2022/07/26 10:38
To version < 78.1 >
edited by Edwin Chen
on 2022/07/10 21:41
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,57 +1,24 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 -
11 -
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 -
14 -
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 25  (% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 -)))
27 -)))
28 28  
29 -(((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 -)))
33 -)))
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
34 34  
35 -(((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 -)))
39 39  
40 -(((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 -)))
43 -)))
44 44  
45 -(((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 -)))
49 -)))
50 50  
51 51  
20 +== Features ==
52 52  
53 -== 1.2  Features ==
54 -
55 55  * Support LoRaWAN v1.0.4 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
... ... @@ -62,11 +62,8 @@
62 62  * Firmware upgradable via UART interface
63 63  * Ultra-long RF range
64 64  
32 +== Specification ==
65 65  
66 -
67 -
68 -== 1.3  Specification ==
69 -
70 70  * CPU: 32-bit 48 MHz
71 71  * Flash: 256KB
72 72  * RAM: 64KB
... ... @@ -85,80 +85,50 @@
85 85  * LoRa Rx current: <9 mA
86 86  * I/O Voltage: 3.3v
87 87  
52 +== AT Command ==
88 88  
89 -
90 -
91 -== 1.4  AT Command ==
92 -
93 -
94 94  AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
95 95  
96 96  
57 +== Dimension ==
97 97  
98 -== 1.5  Dimension ==
59 +[[image:image-20220517072526-1.png]]
99 99  
100 -[[image:image-20220718094750-3.png]]
101 101  
62 +== Pin Mapping ==
102 102  
64 +[[image:image-20220523101537-1.png]]
103 103  
104 -== 1.6  Pin Mapping ==
66 +== Land Pattern ==
105 105  
106 -[[image:image-20220720111850-1.png]]
107 -
108 -
109 -
110 -== 1.7  Land Pattern ==
111 -
112 112  [[image:image-20220517072821-2.png]]
113 113  
114 114  
71 +== Order Info ==
115 115  
116 -= 2.  LA66 LoRaWAN Shield =
73 +Part Number: **LA66-XXX**
117 117  
75 +**XX**: The default frequency band
118 118  
119 -== 2.1  Overview ==
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
120 120  
87 += LA66 LoRaWAN Shield =
121 121  
122 -(((
123 -[[image:image-20220715000826-2.png||height="145" width="220"]]
124 -)))
89 +== Overview ==
125 125  
126 -(((
127 -
128 -)))
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
129 129  
130 -(((
131 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
132 -)))
133 133  
134 -(((
135 -(((
136 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
137 -)))
138 -)))
94 +== Features ==
139 139  
140 -(((
141 -(((
142 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
143 -)))
144 -)))
145 -
146 -(((
147 -(((
148 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
149 -)))
150 -)))
151 -
152 -(((
153 -(((
154 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
155 -)))
156 -)))
157 -
158 -
159 -
160 -== 2.2  Features ==
161 -
162 162  * Arduino Shield base on LA66 LoRaWAN module
163 163  * Support LoRaWAN v1.0.4 protocol
164 164  * Support peer-to-peer protocol
... ... @@ -170,11 +170,8 @@
170 170  * Firmware upgradable via UART interface
171 171  * Ultra-long RF range
172 172  
107 +== Specification ==
173 173  
174 -
175 -
176 -== 2.3  Specification ==
177 -
178 178  * CPU: 32-bit 48 MHz
179 179  * Flash: 256KB
180 180  * RAM: 64KB
... ... @@ -193,111 +193,18 @@
193 193  * LoRa Rx current: <9 mA
194 194  * I/O Voltage: 3.3v
195 195  
127 +== Pin Mapping & LED ==
196 196  
129 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
197 197  
131 +== Example: Join TTN network and send an uplink message, get downlink message. ==
198 198  
199 -== 2.4  LED ==
133 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
200 200  
135 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
201 201  
202 -~1. The LED lights up red when there is an upstream data packet
203 -2. When the network is successfully connected, the green light will be on for 5 seconds
204 -3. Purple light on when receiving downlink data packets
137 +=== Items needed for update ===
205 205  
206 -
207 -
208 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
209 -
210 -
211 -**Show connection diagram：**
212 -
213 -
214 -[[image:image-20220723170210-2.png||height="908" width="681"]]
215 -
216 -
217 -
218 -**1.  open Arduino IDE**
219 -
220 -
221 -[[image:image-20220723170545-4.png]]
222 -
223 -
224 -
225 -**2.  Open project**
226 -
227 -
228 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
229 -
230 -[[image:image-20220723170750-5.png||height="533" width="930"]]
231 -
232 -
233 -
234 -**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
235 -
236 -
237 -[[image:image-20220723171228-6.png]]
238 -
239 -
240 -
241 -**4.  After the upload is successful, open the serial port monitoring and send the AT command**
242 -
243 -
244 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
245 -
246 -
247 -
248 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
249 -
250 -
251 -**1.  Open project**
252 -
253 -
254 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
255 -
256 -[[image:image-20220723172502-8.png]]
257 -
258 -
259 -
260 -2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
261 -
262 -
263 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
264 -
265 -
266 -
267 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
268 -
269 -
270 -**1.  Open project**
271 -
272 -
273 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
274 -
275 -
276 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
277 -
278 -
279 -
280 -**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
281 -
282 -
283 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
284 -
285 -
286 -
287 -**3.  Integration into Node-red via TTNV3**
288 -
289 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
290 -
291 -[[image:image-20220723175700-12.png||height="602" width="995"]]
292 -
293 -
294 -
295 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
296 -
297 -
298 -=== 2.8.1  Items needed for update ===
299 -
300 -
301 301  1. LA66 LoRaWAN Shield
302 302  1. Arduino
303 303  1. USB TO TTL Adapter
... ... @@ -305,23 +305,15 @@
305 305  [[image:image-20220602100052-2.png||height="385" width="600"]]
306 306  
307 307  
308 -=== 2.8.2  Connection ===
146 +=== Connection ===
309 309  
310 -
311 311  [[image:image-20220602101311-3.png||height="276" width="600"]]
312 312  
150 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 +**GND  <-> GND
152 +TXD  <-> TXD
153 +RXD  <-> RXD**
313 313  
314 -(((
315 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
316 -)))
317 -
318 -(((
319 -(% style="background-color:yellow" %)**GND  <-> GND
320 -TXD  <->  TXD
321 -RXD  <->  RXD**
322 -)))
323 -
324 -
325 325  Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
326 326  
327 327  Connect USB TTL Adapter to PC after connecting the wires
... ... @@ -330,115 +330,91 @@
330 330  [[image:image-20220602102240-4.png||height="304" width="600"]]
331 331  
332 332  
333 -=== 2.8.3  Upgrade steps ===
163 +=== Upgrade steps ===
334 334  
165 +==== Switch SW1 to put in ISP position ====
335 335  
336 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
337 -
338 -
339 339  [[image:image-20220602102824-5.png||height="306" width="600"]]
340 340  
341 341  
170 +==== Press the RST switch once ====
342 342  
343 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
344 -
345 -
346 346  [[image:image-20220602104701-12.png||height="285" width="600"]]
347 347  
348 348  
175 +==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
349 349  
350 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
177 +**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
351 351  
352 -
353 -(((
354 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
355 -)))
356 -
357 -
358 358  [[image:image-20220602103227-6.png]]
359 359  
360 -
361 361  [[image:image-20220602103357-7.png]]
362 362  
363 363  
364 -
365 365  (% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
366 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
185 +**2. Select the COM port corresponding to USB TTL**
367 367  
368 -
369 369  [[image:image-20220602103844-8.png]]
370 370  
371 371  
372 -
373 373  (% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
374 -(% style="color:blue" %)**3. Select the bin file to burn**
191 +**3. Select the bin file to burn**
375 375  
376 -
377 377  [[image:image-20220602104144-9.png]]
378 378  
379 -
380 380  [[image:image-20220602104251-10.png]]
381 381  
382 -
383 383  [[image:image-20220602104402-11.png]]
384 384  
385 385  
386 -
387 387  (% class="wikigeneratedid" id="HClicktostartthedownload" %)
388 -(% style="color:blue" %)**4. Click to start the download**
201 +**4. Click to start the download**
389 389  
390 390  [[image:image-20220602104923-13.png]]
391 391  
392 392  
393 -
394 394  (% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
395 -(% style="color:blue" %)**5. Check update process**
207 +**5. Check update process**
396 396  
397 -
398 398  [[image:image-20220602104948-14.png]]
399 399  
400 400  
401 -
402 402  (% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
403 -(% style="color:blue" %)**The following picture shows that the burning is successful**
213 +**The following picture shows that the burning is successful**
404 404  
405 405  [[image:image-20220602105251-15.png]]
406 406  
407 407  
218 +== Order Info ==
408 408  
409 -= 3.  LA66 USB LoRaWAN Adapter =
220 +Part Number: **LA66-LoRaWAN-Shield-XXX**
410 410  
222 +**XX**: The default frequency band
411 411  
412 -== 3.1  Overview ==
224 +* **AS923**: LoRaWAN AS923 band
225 +* **AU915**: LoRaWAN AU915 band
226 +* **EU433**: LoRaWAN EU433 band
227 +* **EU868**: LoRaWAN EU868 band
228 +* **KR920**: LoRaWAN KR920 band
229 +* **US915**: LoRaWAN US915 band
230 +* **IN865**: LoRaWAN IN865 band
231 +* **CN470**: LoRaWAN CN470 band
232 +* **PP**: Peer to Peer LoRa Protocol
413 413  
234 +== Package Info ==
414 414  
415 -[[image:image-20220715001142-3.png||height="145" width="220"]]
236 +* LA66 LoRaWAN Shield x 1
237 +* RF Antenna x 1
416 416  
239 += LA66 USB LoRaWAN Adapter =
417 417  
418 -(((
419 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
420 -)))
241 +== Overview ==
421 421  
422 -(((
423 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
424 -)))
243 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
425 425  
426 -(((
427 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
428 -)))
429 429  
430 -(((
431 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
432 -)))
246 +== Features ==
433 433  
434 -(((
435 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
436 -)))
437 -
438 -
439 -
440 -== 3.2  Features ==
441 -
442 442  * LoRaWAN USB adapter base on LA66 LoRaWAN module
443 443  * Ultra-long RF range
444 444  * Support LoRaWAN v1.0.4 protocol
... ... @@ -449,12 +449,9 @@
449 449  * World-wide unique OTAA keys.
450 450  * AT Command via UART-TTL interface
451 451  * Firmware upgradable via UART interface
452 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
453 453  
259 +== Specification ==
454 454  
455 -
456 -== 3.3  Specification ==
457 -
458 458  * CPU: 32-bit 48 MHz
459 459  * Flash: 256KB
460 460  * RAM: 64KB
... ... @@ -471,263 +471,123 @@
471 471  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
472 472  * LoRa Rx current: <9 mA
473 473  
277 +== Pin Mapping & LED ==
474 474  
279 +== Example Send & Get Messages via LoRaWAN in PC ==
475 475  
476 -== 3.4  Pin Mapping & LED ==
281 +Connect the LA66 LoRa Shield to the PC
477 477  
283 +[[image:image-20220602171217-1.png||height="615" width="915"]]
478 478  
479 -
480 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
481 -
482 -
483 -(((
484 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
485 -)))
486 -
487 -
488 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
489 -
490 -
491 -[[image:image-20220723100027-1.png]]
492 -
493 -
494 494  Open the serial port tool
495 495  
496 496  [[image:image-20220602161617-8.png]]
497 497  
498 -[[image:image-20220602161718-9.png||height="457" width="800"]]
289 +[[image:image-20220602161718-9.png||height="529" width="927"]]
499 499  
291 +Press the reset switch RST on the LA66 LoRa Shield.
500 500  
293 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
501 501  
502 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
295 +[[image:image-20220602161935-10.png]]
503 503  
504 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
297 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
505 505  
506 -
507 -[[image:image-20220602161935-10.png||height="498" width="800"]]
508 -
509 -
510 -
511 -(% style="color:blue" %)**3. See Uplink Command**
512 -
513 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
514 -
515 515  example: AT+SENDB=01,02,8,05820802581ea0a5
516 516  
517 -[[image:image-20220602162157-11.png||height="497" width="800"]]
301 +[[image:image-20220602162157-11.png]]
518 518  
303 +Check to see if TTN received the message
519 519  
305 +[[image:image-20220602162331-12.png||height="547" width="1044"]]
520 520  
521 -(% style="color:blue" %)**4. Check to see if TTN received the message**
307 +== Example Send & Get Messages via LoRaWAN in RPi ==
522 522  
523 -[[image:image-20220602162331-12.png||height="420" width="800"]]
309 +Connect the LA66 LoRa Shield to the RPI
524 524  
311 +[[image:image-20220602171233-2.png||height="592" width="881"]]
525 525  
313 +Log in to the RPI's terminal and connect to the serial port
526 526  
527 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
315 +[[image:image-20220602153146-3.png]]
528 528  
317 +Press the reset switch RST on the LA66 LoRa Shield.
318 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
529 529  
530 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
320 +[[image:image-20220602154928-5.png]]
531 531  
532 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
322 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
533 533  
534 -(% style="color:red" %)**Preconditions:**
535 -
536 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
537 -
538 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
539 -
540 -
541 -
542 -(% style="color:blue" %)**Steps for usage:**
543 -
544 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
545 -
546 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
547 -
548 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
549 -
550 -
551 -
552 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
553 -
554 -
555 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
556 -
557 -
558 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
559 -
560 -[[image:image-20220723100439-2.png]]
561 -
562 -
563 -
564 -(% style="color:blue" %)**2. Install Minicom in RPi.**
565 -
566 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
567 -
568 - (% style="background-color:yellow" %)**apt update**
569 -
570 - (% style="background-color:yellow" %)**apt install minicom**
571 -
572 -
573 -Use minicom to connect to the RPI's terminal
574 -
575 -[[image:image-20220602153146-3.png||height="439" width="500"]]
576 -
577 -
578 -
579 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
580 -
581 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
582 -
583 -
584 -[[image:image-20220602154928-5.png||height="436" width="500"]]
585 -
586 -
587 -
588 -(% style="color:blue" %)**4. Send Uplink message**
589 -
590 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
591 -
592 592  example: AT+SENDB=01,02,8,05820802581ea0a5
593 593  
326 +[[image:image-20220602160339-6.png]]
594 594  
595 -[[image:image-20220602160339-6.png||height="517" width="600"]]
596 -
597 -
598 -
599 599  Check to see if TTN received the message
600 600  
601 -[[image:image-20220602160627-7.png||height="369" width="800"]]
330 +[[image:image-20220602160627-7.png||height="468" width="1013"]]
602 602  
332 +=== Install Minicom ===
603 603  
334 +Enter the following command in the RPI terminal
604 604  
605 -== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
336 +apt update
606 606  
338 +[[image:image-20220602143155-1.png]]
607 607  
608 -=== 3.8.1 DRAGINO-LA66-APP ===
340 +apt install minicom
609 609  
342 +[[image:image-20220602143744-2.png]]
610 610  
611 -[[image:image-20220723102027-3.png]]
344 +=== Send PC's CPU/RAM usage to TTN via script. ===
612 612  
346 +==== Take python as an example： ====
613 613  
348 +===== Preconditions: =====
614 614  
615 -==== (% style="color:blue" %)**Overview：**(%%) ====
350 +1.LA66 USB LoRaWAN Adapter works fine
616 616  
352 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
617 617  
618 -DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
354 +===== Steps for usage =====
619 619  
620 -View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
356 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
621 621  
358 +2.Run the script and see the TTN
622 622  
360 +[[image:image-20220602115852-3.png]]
623 623  
624 -==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
625 625  
626 626  
627 -Requires a type-c to USB adapter
364 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
628 628  
629 -[[image:image-20220723104754-4.png]]
630 630  
367 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
631 631  
632 632  
633 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
634 634  
371 +== Order Info ==
635 635  
636 -Function and page introduction
373 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
637 637  
638 -[[image:image-20220723113448-7.png||height="1481" width="670"]]
375 +**XX**: The default frequency band
639 639  
640 -1.Display LA66 USB LoRaWAN Module connection status
377 +* **AS923**: LoRaWAN AS923 band
378 +* **AU915**: LoRaWAN AU915 band
379 +* **EU433**: LoRaWAN EU433 band
380 +* **EU868**: LoRaWAN EU868 band
381 +* **KR920**: LoRaWAN KR920 band
382 +* **US915**: LoRaWAN US915 band
383 +* **IN865**: LoRaWAN IN865 band
384 +* **CN470**: LoRaWAN CN470 band
385 +* **PP**: Peer to Peer LoRa Protocol
641 641  
642 -2.Check and reconnect
387 +== Package Info ==
643 643  
644 -3.Turn send timestamps on or off
389 +* LA66 USB LoRaWAN Adapter x 1
645 645  
646 -4.Display LoRaWan connection status
647 647  
648 -5.Check LoRaWan connection status
392 += Reference =
649 649  
650 -6.The RSSI value of the node when the ACK is received
651 -
652 -7.Node's Signal Strength Icon
653 -
654 -8.Set the packet sending interval of the node in seconds
655 -
656 -9.AT command input box
657 -
658 -10.Send AT command button
659 -
660 -11.Node log box
661 -
662 -12.clear log button
663 -
664 -13.exit button
665 -
666 -
667 -LA66 USB LoRaWAN Module not connected
668 -
669 -[[image:image-20220723110520-5.png||height="903" width="677"]]
670 -
671 -
672 -
673 -Connect LA66 USB LoRaWAN Module
674 -
675 -[[image:image-20220723110626-6.png||height="906" width="680"]]
676 -
677 -
678 -
679 -=== 3.8.2 Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
680 -
681 -
682 -**1.  Register LA66 USB LoRaWAN Module to TTNV3**
683 -
684 -[[image:image-20220723134549-8.png]]
685 -
686 -
687 -
688 -**2.  Open Node-RED,And import the JSON file to generate the flow**
689 -
690 -Sample JSON file please go to this link to download：放置JSON文件的链接
691 -
692 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
693 -
694 -The following is the positioning effect map
695 -
696 -[[image:image-20220723144339-1.png]]
697 -
698 -
699 -
700 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
701 -
702 -
703 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
704 -
705 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
706 -
707 -[[image:image-20220723150132-2.png]]
708 -
709 -
710 -
711 -= 4.  Order Info =
712 -
713 -
714 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
715 -
716 -
717 -(% style="color:blue" %)**XXX**(%%): The default frequency band
718 -
719 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
720 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
721 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
722 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
723 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
724 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
725 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
726 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
727 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
728 -
729 -
730 -= 5.  Reference =
731 -
732 -
733 733  * Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
395 +
396 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0