Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 134.5 >
edited by Xiaoling
on 2022/07/26 10:38
To version < 72.1 >
edited by Edwin Chen
on 2022/07/03 00:02
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,57 +1,24 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 -
11 -
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 -
14 -
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 25  (% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 -)))
27 -)))
28 28  
29 -(((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 -)))
33 -)))
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
34 34  
35 -(((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 -)))
39 39  
40 -(((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 -)))
43 -)))
44 44  
45 -(((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 -)))
49 -)))
50 50  
51 51  
20 +== Features ==
52 52  
53 -== 1.2  Features ==
54 -
55 55  * Support LoRaWAN v1.0.4 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
... ... @@ -62,11 +62,8 @@
62 62  * Firmware upgradable via UART interface
63 63  * Ultra-long RF range
64 64  
32 +== Specification ==
65 65  
66 -
67 -
68 -== 1.3  Specification ==
69 -
70 70  * CPU: 32-bit 48 MHz
71 71  * Flash: 256KB
72 72  * RAM: 64KB
... ... @@ -85,80 +85,51 @@
85 85  * LoRa Rx current: <9 mA
86 86  * I/O Voltage: 3.3v
87 87  
52 +== AT Command ==
88 88  
89 -
90 -
91 -== 1.4  AT Command ==
92 -
93 -
94 94  AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
95 95  
96 96  
57 +== Dimension ==
97 97  
98 -== 1.5  Dimension ==
59 +[[image:image-20220517072526-1.png]]
99 99  
100 -[[image:image-20220718094750-3.png]]
101 101  
62 +== Pin Mapping ==
102 102  
64 +[[image:image-20220523101537-1.png]]
103 103  
104 -== 1.6  Pin Mapping ==
66 +== Land Pattern ==
105 105  
106 -[[image:image-20220720111850-1.png]]
107 -
108 -
109 -
110 -== 1.7  Land Pattern ==
111 -
112 112  [[image:image-20220517072821-2.png]]
113 113  
114 114  
71 +== Order Info ==
115 115  
116 -= 2.  LA66 LoRaWAN Shield =
73 +Part Number: **LA66-XXX**
117 117  
75 +**XX**: The default frequency band
118 118  
119 -== 2.1  Overview ==
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
120 120  
121 121  
122 -(((
123 -[[image:image-20220715000826-2.png||height="145" width="220"]]
124 -)))
88 += LA66 LoRaWAN Shield =
125 125  
126 -(((
127 -
128 -)))
90 +== Overview ==
129 129  
130 -(((
131 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
132 -)))
92 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
133 133  
134 -(((
135 -(((
136 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
137 -)))
138 -)))
139 139  
140 -(((
141 -(((
142 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
143 -)))
144 -)))
95 +== Features ==
145 145  
146 -(((
147 -(((
148 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
149 -)))
150 -)))
151 -
152 -(((
153 -(((
154 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
155 -)))
156 -)))
157 -
158 -
159 -
160 -== 2.2  Features ==
161 -
162 162  * Arduino Shield base on LA66 LoRaWAN module
163 163  * Support LoRaWAN v1.0.4 protocol
164 164  * Support peer-to-peer protocol
... ... @@ -170,11 +170,8 @@
170 170  * Firmware upgradable via UART interface
171 171  * Ultra-long RF range
172 172  
108 +== Specification ==
173 173  
174 -
175 -
176 -== 2.3  Specification ==
177 -
178 178  * CPU: 32-bit 48 MHz
179 179  * Flash: 256KB
180 180  * RAM: 64KB
... ... @@ -193,541 +193,212 @@
193 193  * LoRa Rx current: <9 mA
194 194  * I/O Voltage: 3.3v
195 195  
128 +== Pin Mapping & LED ==
196 196  
130 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
197 197  
132 +== Example: Join TTN network and send an uplink message, get downlink message. ==
198 198  
199 -== 2.4  LED ==
134 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
200 200  
136 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
201 201  
202 -~1. The LED lights up red when there is an upstream data packet
203 -2. When the network is successfully connected, the green light will be on for 5 seconds
204 -3. Purple light on when receiving downlink data packets
138 +=== what needs to be used ===
205 205  
140 +1.LA66 LoRaWAN Shield that needs to be upgraded
206 206  
142 +2.Arduino
207 207  
208 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
144 +3.USB TO TTL
209 209  
146 +[[image:image-20220602100052-2.png]]
210 210  
211 -**Show connection diagram：**
148 +=== Wiring Schematic ===
212 212  
150 +[[image:image-20220602101311-3.png]]
213 213  
214 -[[image:image-20220723170210-2.png||height="908" width="681"]]
152 +LA66 LoRaWAN Shield  >>>>>>>>>>>>USB TTL
215 215  
154 +GND  >>>>>>>>>>>>GND
216 216  
156 +TXD  >>>>>>>>>>>>TXD
217 217  
218 -**1.  open Arduino IDE**
158 +RXD  >>>>>>>>>>>>RXD
219 219  
160 +JP6 of LA66 LoRaWAN Shield needs to be connected with yellow jumper cap
220 220  
221 -[[image:image-20220723170545-4.png]]
162 +Connect to the PC after connecting the wires
222 222  
164 +[[image:image-20220602102240-4.png]]
223 223  
166 +=== Upgrade steps ===
224 224  
225 -**2.  Open project**
168 +==== Dial the SW1 of the LA66 LoRaWAN Shield to the ISP's location as shown in the figure below ====
226 226  
170 +[[image:image-20220602102824-5.png]]
227 227  
228 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
172 +==== Press the RST switch on the LA66 LoRaWAN Shield once ====
229 229  
230 -[[image:image-20220723170750-5.png||height="533" width="930"]]
174 +[[image:image-20220602104701-12.png]]
231 231  
176 +==== Open the upgrade application software ====
232 232  
178 +Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
233 233  
234 -**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
235 -
236 -
237 -[[image:image-20220723171228-6.png]]
238 -
239 -
240 -
241 -**4.  After the upload is successful, open the serial port monitoring and send the AT command**
242 -
243 -
244 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
245 -
246 -
247 -
248 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
249 -
250 -
251 -**1.  Open project**
252 -
253 -
254 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
255 -
256 -[[image:image-20220723172502-8.png]]
257 -
258 -
259 -
260 -2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
261 -
262 -
263 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
264 -
265 -
266 -
267 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
268 -
269 -
270 -**1.  Open project**
271 -
272 -
273 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
274 -
275 -
276 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
277 -
278 -
279 -
280 -**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
281 -
282 -
283 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
284 -
285 -
286 -
287 -**3.  Integration into Node-red via TTNV3**
288 -
289 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
290 -
291 -[[image:image-20220723175700-12.png||height="602" width="995"]]
292 -
293 -
294 -
295 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
296 -
297 -
298 -=== 2.8.1  Items needed for update ===
299 -
300 -
301 -1. LA66 LoRaWAN Shield
302 -1. Arduino
303 -1. USB TO TTL Adapter
304 -
305 -[[image:image-20220602100052-2.png||height="385" width="600"]]
306 -
307 -
308 -=== 2.8.2  Connection ===
309 -
310 -
311 -[[image:image-20220602101311-3.png||height="276" width="600"]]
312 -
313 -
314 -(((
315 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
316 -)))
317 -
318 -(((
319 -(% style="background-color:yellow" %)**GND  <-> GND
320 -TXD  <->  TXD
321 -RXD  <->  RXD**
322 -)))
323 -
324 -
325 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
326 -
327 -Connect USB TTL Adapter to PC after connecting the wires
328 -
329 -
330 -[[image:image-20220602102240-4.png||height="304" width="600"]]
331 -
332 -
333 -=== 2.8.3  Upgrade steps ===
334 -
335 -
336 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
337 -
338 -
339 -[[image:image-20220602102824-5.png||height="306" width="600"]]
340 -
341 -
342 -
343 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
344 -
345 -
346 -[[image:image-20220602104701-12.png||height="285" width="600"]]
347 -
348 -
349 -
350 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
351 -
352 -
353 -(((
354 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
355 -)))
356 -
357 -
358 358  [[image:image-20220602103227-6.png]]
359 359  
360 -
361 361  [[image:image-20220602103357-7.png]]
362 362  
184 +===== Select the COM port corresponding to USB TTL =====
363 363  
364 -
365 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
366 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
367 -
368 -
369 369  [[image:image-20220602103844-8.png]]
370 370  
188 +===== Select the bin file to burn =====
371 371  
372 -
373 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
374 -(% style="color:blue" %)**3. Select the bin file to burn**
375 -
376 -
377 377  [[image:image-20220602104144-9.png]]
378 378  
379 -
380 380  [[image:image-20220602104251-10.png]]
381 381  
382 -
383 383  [[image:image-20220602104402-11.png]]
384 384  
196 +===== Click to start the download =====
385 385  
386 -
387 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
388 -(% style="color:blue" %)**4. Click to start the download**
389 -
390 390  [[image:image-20220602104923-13.png]]
391 391  
200 +===== The following figure appears to prove that the burning is in progress =====
392 392  
393 -
394 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
395 -(% style="color:blue" %)**5. Check update process**
396 -
397 -
398 398  [[image:image-20220602104948-14.png]]
399 399  
204 +===== The following picture appears to prove that the burning is successful =====
400 400  
401 -
402 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
403 -(% style="color:blue" %)**The following picture shows that the burning is successful**
404 -
405 405  [[image:image-20220602105251-15.png]]
406 406  
208 +(% class="wikigeneratedid" %)
209 += =
407 407  
211 +== Order Info ==
408 408  
409 -= 3.  LA66 USB LoRaWAN Adapter =
213 +Part Number: **LA66-LoRaWAN-Shield-XXX**
410 410  
215 +**XX**: The default frequency band
411 411  
412 -== 3.1  Overview ==
217 +* **AS923**: LoRaWAN AS923 band
218 +* **AU915**: LoRaWAN AU915 band
219 +* **EU433**: LoRaWAN EU433 band
220 +* **EU868**: LoRaWAN EU868 band
221 +* **KR920**: LoRaWAN KR920 band
222 +* **US915**: LoRaWAN US915 band
223 +* **IN865**: LoRaWAN IN865 band
224 +* **CN470**: LoRaWAN CN470 band
225 +* **PP**: Peer to Peer LoRa Protocol
413 413  
414 414  
415 -[[image:image-20220715001142-3.png||height="145" width="220"]]
228 +(% class="wikigeneratedid" %)
229 +== Package Info ==
416 416  
231 +* LA66 LoRaWAN Shield x 1
232 +* RF Antenna x 1
417 417  
418 -(((
419 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
420 -)))
421 421  
422 -(((
423 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
424 -)))
425 425  
426 -(((
427 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
428 -)))
429 429  
430 -(((
431 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
432 -)))
433 433  
434 -(((
435 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
436 -)))
238 += LA66 USB LoRaWAN Adapter =
437 437  
240 +LA66 USB LoRaWAN Adapter is the USB Adapter for LA66, it combines a USB TTL Chip and LA66 module which can easy to test the LoRaWAN feature by using PC or embedded device which has USB Interface.
438 438  
242 +Before use, please make sure that the computer has installed the CP2102 driver
439 439  
440 -== 3.2  Features ==
244 +== Pin Mapping & LED ==
441 441  
442 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
443 -* Ultra-long RF range
444 -* Support LoRaWAN v1.0.4 protocol
445 -* Support peer-to-peer protocol
446 -* TCXO crystal to ensure RF performance on low temperature
447 -* Spring RF antenna
448 -* Available in different frequency LoRaWAN frequency bands.
449 -* World-wide unique OTAA keys.
450 -* AT Command via UART-TTL interface
451 -* Firmware upgradable via UART interface
452 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
246 +== Example Send & Get Messages via LoRaWAN in PC ==
453 453  
248 +Connect the LA66 LoRa Shield to the PC
454 454  
250 +[[image:image-20220602171217-1.png||height="615" width="915"]]
455 455  
456 -== 3.3  Specification ==
457 -
458 -* CPU: 32-bit 48 MHz
459 -* Flash: 256KB
460 -* RAM: 64KB
461 -* Input Power Range: 5v
462 -* Frequency Range: 150 MHz ~~ 960 MHz
463 -* Maximum Power +22 dBm constant RF output
464 -* High sensitivity: -148 dBm
465 -* Temperature:
466 -** Storage: -55 ~~ +125℃
467 -** Operating: -40 ~~ +85℃
468 -* Humidity:
469 -** Storage: 5 ~~ 95% (Non-Condensing)
470 -** Operating: 10 ~~ 95% (Non-Condensing)
471 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
472 -* LoRa Rx current: <9 mA
473 -
474 -
475 -
476 -== 3.4  Pin Mapping & LED ==
477 -
478 -
479 -
480 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
481 -
482 -
483 -(((
484 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
485 -)))
486 -
487 -
488 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
489 -
490 -
491 -[[image:image-20220723100027-1.png]]
492 -
493 -
494 494  Open the serial port tool
495 495  
496 496  [[image:image-20220602161617-8.png]]
497 497  
498 -[[image:image-20220602161718-9.png||height="457" width="800"]]
256 +[[image:image-20220602161718-9.png||height="529" width="927"]]
499 499  
258 +Press the reset switch RST on the LA66 LoRa Shield.
500 500  
260 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
501 501  
502 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
262 +[[image:image-20220602161935-10.png]]
503 503  
504 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
264 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
505 505  
506 -
507 -[[image:image-20220602161935-10.png||height="498" width="800"]]
508 -
509 -
510 -
511 -(% style="color:blue" %)**3. See Uplink Command**
512 -
513 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
514 -
515 515  example: AT+SENDB=01,02,8,05820802581ea0a5
516 516  
517 -[[image:image-20220602162157-11.png||height="497" width="800"]]
268 +[[image:image-20220602162157-11.png]]
518 518  
270 +Check to see if TTN received the message
519 519  
272 +[[image:image-20220602162331-12.png||height="547" width="1044"]]
520 520  
521 -(% style="color:blue" %)**4. Check to see if TTN received the message**
274 +== Example Send & Get Messages via LoRaWAN in RPi ==
522 522  
523 -[[image:image-20220602162331-12.png||height="420" width="800"]]
276 +Connect the LA66 LoRa Shield to the RPI
524 524  
278 +[[image:image-20220602171233-2.png||height="592" width="881"]]
525 525  
280 +Log in to the RPI's terminal and connect to the serial port
526 526  
527 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
282 +[[image:image-20220602153146-3.png]]
528 528  
284 +Press the reset switch RST on the LA66 LoRa Shield.
285 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
529 529  
530 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
287 +[[image:image-20220602154928-5.png]]
531 531  
532 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
289 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
533 533  
534 -(% style="color:red" %)**Preconditions:**
535 -
536 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
537 -
538 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
539 -
540 -
541 -
542 -(% style="color:blue" %)**Steps for usage:**
543 -
544 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
545 -
546 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
547 -
548 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
549 -
550 -
551 -
552 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
553 -
554 -
555 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
556 -
557 -
558 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
559 -
560 -[[image:image-20220723100439-2.png]]
561 -
562 -
563 -
564 -(% style="color:blue" %)**2. Install Minicom in RPi.**
565 -
566 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
567 -
568 - (% style="background-color:yellow" %)**apt update**
569 -
570 - (% style="background-color:yellow" %)**apt install minicom**
571 -
572 -
573 -Use minicom to connect to the RPI's terminal
574 -
575 -[[image:image-20220602153146-3.png||height="439" width="500"]]
576 -
577 -
578 -
579 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
580 -
581 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
582 -
583 -
584 -[[image:image-20220602154928-5.png||height="436" width="500"]]
585 -
586 -
587 -
588 -(% style="color:blue" %)**4. Send Uplink message**
589 -
590 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
591 -
592 592  example: AT+SENDB=01,02,8,05820802581ea0a5
593 593  
293 +[[image:image-20220602160339-6.png]]
594 594  
595 -[[image:image-20220602160339-6.png||height="517" width="600"]]
596 -
597 -
598 -
599 599  Check to see if TTN received the message
600 600  
601 -[[image:image-20220602160627-7.png||height="369" width="800"]]
297 +[[image:image-20220602160627-7.png||height="468" width="1013"]]
602 602  
299 +=== Install Minicom ===
603 603  
301 +Enter the following command in the RPI terminal
604 604  
605 -== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
303 +apt update
606 606  
305 +[[image:image-20220602143155-1.png]]
607 607  
608 -=== 3.8.1 DRAGINO-LA66-APP ===
307 +apt install minicom
609 609  
309 +[[image:image-20220602143744-2.png]]
610 610  
611 -[[image:image-20220723102027-3.png]]
311 +=== Send PC's CPU/RAM usage to TTN via script. ===
612 612  
313 +==== Take python as an example： ====
613 613  
315 +===== Preconditions: =====
614 614  
615 -==== (% style="color:blue" %)**Overview：**(%%) ====
317 +1.LA66 USB LoRaWAN Adapter works fine
616 616  
319 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
617 617  
618 -DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
321 +===== Steps for usage =====
619 619  
620 -View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
323 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
621 621  
325 +2.Run the script and see the TTN
622 622  
327 +[[image:image-20220602115852-3.png]]
623 623  
624 -==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
625 625  
626 626  
627 -Requires a type-c to USB adapter
331 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
628 628  
629 -[[image:image-20220723104754-4.png]]
630 630  
334 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
631 631  
632 -
633 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
634 -
635 -
636 -Function and page introduction
637 -
638 -[[image:image-20220723113448-7.png||height="1481" width="670"]]
639 -
640 -1.Display LA66 USB LoRaWAN Module connection status
641 -
642 -2.Check and reconnect
643 -
644 -3.Turn send timestamps on or off
645 -
646 -4.Display LoRaWan connection status
647 -
648 -5.Check LoRaWan connection status
649 -
650 -6.The RSSI value of the node when the ACK is received
651 -
652 -7.Node's Signal Strength Icon
653 -
654 -8.Set the packet sending interval of the node in seconds
655 -
656 -9.AT command input box
657 -
658 -10.Send AT command button
659 -
660 -11.Node log box
661 -
662 -12.clear log button
663 -
664 -13.exit button
665 -
666 -
667 -LA66 USB LoRaWAN Module not connected
668 -
669 -[[image:image-20220723110520-5.png||height="903" width="677"]]
670 -
671 -
672 -
673 -Connect LA66 USB LoRaWAN Module
674 -
675 -[[image:image-20220723110626-6.png||height="906" width="680"]]
676 -
677 -
678 -
679 -=== 3.8.2 Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
680 -
681 -
682 -**1.  Register LA66 USB LoRaWAN Module to TTNV3**
683 -
684 -[[image:image-20220723134549-8.png]]
685 -
686 -
687 -
688 -**2.  Open Node-RED,And import the JSON file to generate the flow**
689 -
690 -Sample JSON file please go to this link to download：放置JSON文件的链接
691 -
692 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
693 -
694 -The following is the positioning effect map
695 -
696 -[[image:image-20220723144339-1.png]]
697 -
698 -
699 -
700 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
701 -
702 -
703 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
704 -
705 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
706 -
707 -[[image:image-20220723150132-2.png]]
708 -
709 -
710 -
711 -= 4.  Order Info =
712 -
713 -
714 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
715 -
716 -
717 -(% style="color:blue" %)**XXX**(%%): The default frequency band
718 -
719 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
720 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
721 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
722 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
723 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
724 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
725 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
726 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
727 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
728 -
729 -
730 -= 5.  Reference =
731 -
732 -
733 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
336 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0