Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 134.4 >
edited by Xiaoling
on 2022/07/26 10:37
To version < 71.1 >
edited by Edwin Chen
on 2022/07/03 00:00
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,57 +1,24 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 -
11 -
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 -
14 -
15 -(((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 -)))
19 -
20 -(((
21 -
22 -)))
23 -
24 -(((
25 25  (% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
26 -)))
27 -)))
28 28  
29 -(((
30 -(((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 -)))
33 -)))
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
34 34  
35 -(((
36 -(((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 -)))
39 39  
40 -(((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 -)))
43 -)))
44 44  
45 -(((
46 -(((
47 47  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
48 -)))
49 -)))
50 50  
51 51  
20 +== Features ==
52 52  
53 -== 1.2  Features ==
54 -
55 55  * Support LoRaWAN v1.0.4 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
... ... @@ -63,10 +63,8 @@
63 63  * Ultra-long RF range
64 64  
65 65  
33 +== Specification ==
66 66  
67 -
68 -== 1.3  Specification ==
69 -
70 70  * CPU: 32-bit 48 MHz
71 71  * Flash: 256KB
72 72  * RAM: 64KB
... ... @@ -85,80 +85,52 @@
85 85  * LoRa Rx current: <9 mA
86 86  * I/O Voltage: 3.3v
87 87  
53 +== AT Command ==
88 88  
89 -
90 -
91 -== 1.4  AT Command ==
92 -
93 -
94 94  AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
95 95  
96 96  
58 +== Dimension ==
97 97  
98 -== 1.5  Dimension ==
60 +[[image:image-20220517072526-1.png]]
99 99  
100 -[[image:image-20220718094750-3.png]]
101 101  
63 +== Pin Mapping ==
102 102  
65 +[[image:image-20220523101537-1.png]]
103 103  
104 -== 1.6  Pin Mapping ==
67 +== Land Pattern ==
105 105  
106 -[[image:image-20220720111850-1.png]]
107 -
108 -
109 -
110 -== 1.7  Land Pattern ==
111 -
112 112  [[image:image-20220517072821-2.png]]
113 113  
114 114  
72 +== Part Number ==
115 115  
116 -= 2.  LA66 LoRaWAN Shield =
74 +Part Number: **LA66-XXX**
117 117  
76 +**XX**: The default frequency band
118 118  
119 -== 2.1  Overview ==
78 +* **AS923**: LoRaWAN AS923 band
79 +* **AU915**: LoRaWAN AU915 band
80 +* **EU433**: LoRaWAN EU433 band
81 +* **EU868**: LoRaWAN EU868 band
82 +* **KR920**: LoRaWAN KR920 band
83 +* **US915**: LoRaWAN US915 band
84 +* **IN865**: LoRaWAN IN865 band
85 +* **CN470**: LoRaWAN CN470 band
86 +* **PP**: Peer to Peer LoRa Protocol
120 120  
121 121  
122 -(((
123 -[[image:image-20220715000826-2.png||height="145" width="220"]]
124 -)))
125 125  
126 -(((
127 -
128 -)))
90 += LA66 LoRaWAN Shield =
129 129  
130 -(((
131 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
132 -)))
92 +== Overview ==
133 133  
134 -(((
135 -(((
136 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
137 -)))
138 -)))
94 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
139 139  
140 -(((
141 -(((
142 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
143 -)))
144 -)))
145 145  
146 -(((
147 -(((
148 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
149 -)))
150 -)))
97 +== Features ==
151 151  
152 -(((
153 -(((
154 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
155 -)))
156 -)))
157 -
158 -
159 -
160 -== 2.2  Features ==
161 -
162 162  * Arduino Shield base on LA66 LoRaWAN module
163 163  * Support LoRaWAN v1.0.4 protocol
164 164  * Support peer-to-peer protocol
... ... @@ -170,8 +170,9 @@
170 170  * Firmware upgradable via UART interface
171 171  * Ultra-long RF range
172 172  
173 -== 2.3  Specification ==
174 174  
111 +== Specification ==
112 +
175 175  * CPU: 32-bit 48 MHz
176 176  * Flash: 256KB
177 177  * RAM: 64KB
... ... @@ -190,536 +190,183 @@
190 190  * LoRa Rx current: <9 mA
191 191  * I/O Voltage: 3.3v
192 192  
193 -== 2.4  LED ==
194 194  
195 -~1. The LED lights up red when there is an upstream data packet
196 -2. When the network is successfully connected, the green light will be on for 5 seconds
197 -3. Purple light on when receiving downlink data packets
132 +== Pin Mapping & LED ==
198 198  
134 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
199 199  
200 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
136 +== Example: Join TTN network and send an uplink message, get downlink message. ==
201 201  
138 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
202 202  
203 -**Show connection diagram：**
140 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
204 204  
142 +=== what needs to be used ===
205 205  
206 -[[image:image-20220723170210-2.png||height="908" width="681"]]
144 +1.LA66 LoRaWAN Shield that needs to be upgraded
207 207  
146 +2.Arduino
208 208  
148 +3.USB TO TTL
209 209  
210 -**1.  open Arduino IDE**
150 +[[image:image-20220602100052-2.png]]
211 211  
152 +=== Wiring Schematic ===
212 212  
213 -[[image:image-20220723170545-4.png]]
154 +[[image:image-20220602101311-3.png]]
214 214  
156 +LA66 LoRaWAN Shield  >>>>>>>>>>>>USB TTL
215 215  
158 +GND  >>>>>>>>>>>>GND
216 216  
217 -**2.  Open project**
160 +TXD  >>>>>>>>>>>>TXD
218 218  
162 +RXD  >>>>>>>>>>>>RXD
219 219  
220 -LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
164 +JP6 of LA66 LoRaWAN Shield needs to be connected with yellow jumper cap
221 221  
222 -[[image:image-20220723170750-5.png||height="533" width="930"]]
166 +Connect to the PC after connecting the wires
223 223  
168 +[[image:image-20220602102240-4.png]]
224 224  
170 +=== Upgrade steps ===
225 225  
226 -**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
172 +==== Dial the SW1 of the LA66 LoRaWAN Shield to the ISP's location as shown in the figure below ====
227 227  
174 +[[image:image-20220602102824-5.png]]
228 228  
229 -[[image:image-20220723171228-6.png]]
176 +==== Press the RST switch on the LA66 LoRaWAN Shield once ====
230 230  
178 +[[image:image-20220602104701-12.png]]
231 231  
180 +==== Open the upgrade application software ====
232 232  
233 -**4.  After the upload is successful, open the serial port monitoring and send the AT command**
182 +Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
234 234  
235 -
236 -[[image:image-20220723172235-7.png||height="480" width="1027"]]
237 -
238 -
239 -
240 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
241 -
242 -
243 -**1.  Open project**
244 -
245 -
246 -Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
247 -
248 -[[image:image-20220723172502-8.png]]
249 -
250 -
251 -
252 -2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
253 -
254 -
255 -[[image:image-20220723172938-9.png||height="652" width="1050"]]
256 -
257 -
258 -
259 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
260 -
261 -
262 -**1.  Open project**
263 -
264 -
265 -Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
266 -
267 -
268 -[[image:image-20220723173341-10.png||height="581" width="1014"]]
269 -
270 -
271 -
272 -**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
273 -
274 -
275 -[[image:image-20220723173950-11.png||height="665" width="1012"]]
276 -
277 -
278 -
279 -**3.  Integration into Node-red via TTNV3**
280 -
281 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
282 -
283 -[[image:image-20220723175700-12.png||height="602" width="995"]]
284 -
285 -
286 -
287 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
288 -
289 -
290 -=== 2.8.1  Items needed for update ===
291 -
292 -
293 -1. LA66 LoRaWAN Shield
294 -1. Arduino
295 -1. USB TO TTL Adapter
296 -
297 -[[image:image-20220602100052-2.png||height="385" width="600"]]
298 -
299 -
300 -=== 2.8.2  Connection ===
301 -
302 -
303 -[[image:image-20220602101311-3.png||height="276" width="600"]]
304 -
305 -
306 -(((
307 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
308 -)))
309 -
310 -(((
311 -(% style="background-color:yellow" %)**GND  <-> GND
312 -TXD  <->  TXD
313 -RXD  <->  RXD**
314 -)))
315 -
316 -
317 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
318 -
319 -Connect USB TTL Adapter to PC after connecting the wires
320 -
321 -
322 -[[image:image-20220602102240-4.png||height="304" width="600"]]
323 -
324 -
325 -=== 2.8.3  Upgrade steps ===
326 -
327 -
328 -==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
329 -
330 -
331 -[[image:image-20220602102824-5.png||height="306" width="600"]]
332 -
333 -
334 -
335 -==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
336 -
337 -
338 -[[image:image-20220602104701-12.png||height="285" width="600"]]
339 -
340 -
341 -
342 -==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
343 -
344 -
345 -(((
346 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
347 -)))
348 -
349 -
350 350  [[image:image-20220602103227-6.png]]
351 351  
352 -
353 353  [[image:image-20220602103357-7.png]]
354 354  
188 +===== Select the COM port corresponding to USB TTL =====
355 355  
356 -
357 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
358 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
359 -
360 -
361 361  [[image:image-20220602103844-8.png]]
362 362  
192 +===== Select the bin file to burn =====
363 363  
364 -
365 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
366 -(% style="color:blue" %)**3. Select the bin file to burn**
367 -
368 -
369 369  [[image:image-20220602104144-9.png]]
370 370  
371 -
372 372  [[image:image-20220602104251-10.png]]
373 373  
374 -
375 375  [[image:image-20220602104402-11.png]]
376 376  
200 +===== Click to start the download =====
377 377  
378 -
379 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
380 -(% style="color:blue" %)**4. Click to start the download**
381 -
382 382  [[image:image-20220602104923-13.png]]
383 383  
204 +===== The following figure appears to prove that the burning is in progress =====
384 384  
385 -
386 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
387 -(% style="color:blue" %)**5. Check update process**
388 -
389 -
390 390  [[image:image-20220602104948-14.png]]
391 391  
208 +===== The following picture appears to prove that the burning is successful =====
392 392  
393 -
394 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
395 -(% style="color:blue" %)**The following picture shows that the burning is successful**
396 -
397 397  [[image:image-20220602105251-15.png]]
398 398  
212 += LA66 USB LoRaWAN Adapter =
399 399  
214 +LA66 USB LoRaWAN Adapter is the USB Adapter for LA66, it combines a USB TTL Chip and LA66 module which can easy to test the LoRaWAN feature by using PC or embedded device which has USB Interface.
400 400  
401 -= 3.  LA66 USB LoRaWAN Adapter =
216 +Before use, please make sure that the computer has installed the CP2102 driver
402 402  
218 +== Pin Mapping & LED ==
403 403  
404 -== 3.1  Overview ==
220 +== Example Send & Get Messages via LoRaWAN in PC ==
405 405  
222 +Connect the LA66 LoRa Shield to the PC
406 406  
407 -[[image:image-20220715001142-3.png||height="145" width="220"]]
224 +[[image:image-20220602171217-1.png||height="615" width="915"]]
408 408  
409 -
410 -(((
411 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
412 -)))
413 -
414 -(((
415 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
416 -)))
417 -
418 -(((
419 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
420 -)))
421 -
422 -(((
423 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
424 -)))
425 -
426 -(((
427 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
428 -)))
429 -
430 -
431 -
432 -== 3.2  Features ==
433 -
434 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
435 -* Ultra-long RF range
436 -* Support LoRaWAN v1.0.4 protocol
437 -* Support peer-to-peer protocol
438 -* TCXO crystal to ensure RF performance on low temperature
439 -* Spring RF antenna
440 -* Available in different frequency LoRaWAN frequency bands.
441 -* World-wide unique OTAA keys.
442 -* AT Command via UART-TTL interface
443 -* Firmware upgradable via UART interface
444 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
445 -
446 -
447 -
448 -== 3.3  Specification ==
449 -
450 -* CPU: 32-bit 48 MHz
451 -* Flash: 256KB
452 -* RAM: 64KB
453 -* Input Power Range: 5v
454 -* Frequency Range: 150 MHz ~~ 960 MHz
455 -* Maximum Power +22 dBm constant RF output
456 -* High sensitivity: -148 dBm
457 -* Temperature:
458 -** Storage: -55 ~~ +125℃
459 -** Operating: -40 ~~ +85℃
460 -* Humidity:
461 -** Storage: 5 ~~ 95% (Non-Condensing)
462 -** Operating: 10 ~~ 95% (Non-Condensing)
463 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
464 -* LoRa Rx current: <9 mA
465 -
466 -
467 -
468 -== 3.4  Pin Mapping & LED ==
469 -
470 -
471 -
472 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
473 -
474 -
475 -(((
476 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
477 -)))
478 -
479 -
480 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
481 -
482 -
483 -[[image:image-20220723100027-1.png]]
484 -
485 -
486 486  Open the serial port tool
487 487  
488 488  [[image:image-20220602161617-8.png]]
489 489  
490 -[[image:image-20220602161718-9.png||height="457" width="800"]]
230 +[[image:image-20220602161718-9.png||height="529" width="927"]]
491 491  
232 +Press the reset switch RST on the LA66 LoRa Shield.
492 492  
234 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
493 493  
494 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
236 +[[image:image-20220602161935-10.png]]
495 495  
496 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
238 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
497 497  
498 -
499 -[[image:image-20220602161935-10.png||height="498" width="800"]]
500 -
501 -
502 -
503 -(% style="color:blue" %)**3. See Uplink Command**
504 -
505 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
506 -
507 507  example: AT+SENDB=01,02,8,05820802581ea0a5
508 508  
509 -[[image:image-20220602162157-11.png||height="497" width="800"]]
242 +[[image:image-20220602162157-11.png]]
510 510  
244 +Check to see if TTN received the message
511 511  
246 +[[image:image-20220602162331-12.png||height="547" width="1044"]]
512 512  
513 -(% style="color:blue" %)**4. Check to see if TTN received the message**
248 +== Example Send & Get Messages via LoRaWAN in RPi ==
514 514  
515 -[[image:image-20220602162331-12.png||height="420" width="800"]]
250 +Connect the LA66 LoRa Shield to the RPI
516 516  
252 +[[image:image-20220602171233-2.png||height="592" width="881"]]
517 517  
254 +Log in to the RPI's terminal and connect to the serial port
518 518  
519 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
256 +[[image:image-20220602153146-3.png]]
520 520  
258 +Press the reset switch RST on the LA66 LoRa Shield.
259 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
521 521  
522 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
261 +[[image:image-20220602154928-5.png]]
523 523  
524 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
263 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
525 525  
526 -(% style="color:red" %)**Preconditions:**
527 -
528 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
529 -
530 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
531 -
532 -
533 -
534 -(% style="color:blue" %)**Steps for usage:**
535 -
536 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
537 -
538 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
539 -
540 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
541 -
542 -
543 -
544 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
545 -
546 -
547 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
548 -
549 -
550 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
551 -
552 -[[image:image-20220723100439-2.png]]
553 -
554 -
555 -
556 -(% style="color:blue" %)**2. Install Minicom in RPi.**
557 -
558 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
559 -
560 - (% style="background-color:yellow" %)**apt update**
561 -
562 - (% style="background-color:yellow" %)**apt install minicom**
563 -
564 -
565 -Use minicom to connect to the RPI's terminal
566 -
567 -[[image:image-20220602153146-3.png||height="439" width="500"]]
568 -
569 -
570 -
571 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
572 -
573 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
574 -
575 -
576 -[[image:image-20220602154928-5.png||height="436" width="500"]]
577 -
578 -
579 -
580 -(% style="color:blue" %)**4. Send Uplink message**
581 -
582 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
583 -
584 584  example: AT+SENDB=01,02,8,05820802581ea0a5
585 585  
267 +[[image:image-20220602160339-6.png]]
586 586  
587 -[[image:image-20220602160339-6.png||height="517" width="600"]]
588 -
589 -
590 -
591 591  Check to see if TTN received the message
592 592  
593 -[[image:image-20220602160627-7.png||height="369" width="800"]]
271 +[[image:image-20220602160627-7.png||height="468" width="1013"]]
594 594  
273 +=== Install Minicom ===
595 595  
275 +Enter the following command in the RPI terminal
596 596  
597 -== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
277 +apt update
598 598  
279 +[[image:image-20220602143155-1.png]]
599 599  
600 -=== 3.8.1 DRAGINO-LA66-APP ===
281 +apt install minicom
601 601  
283 +[[image:image-20220602143744-2.png]]
602 602  
603 -[[image:image-20220723102027-3.png]]
285 +=== Send PC's CPU/RAM usage to TTN via script. ===
604 604  
287 +==== Take python as an example： ====
605 605  
289 +===== Preconditions: =====
606 606  
607 -==== (% style="color:blue" %)**Overview：**(%%) ====
291 +1.LA66 USB LoRaWAN Adapter works fine
608 608  
293 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
609 609  
610 -DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
295 +===== Steps for usage =====
611 611  
612 -View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
297 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
613 613  
299 +2.Run the script and see the TTN
614 614  
301 +[[image:image-20220602115852-3.png]]
615 615  
616 -==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
617 617  
618 618  
619 -Requires a type-c to USB adapter
305 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
620 620  
621 -[[image:image-20220723104754-4.png]]
622 622  
308 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
623 623  
624 -
625 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
626 -
627 -
628 -Function and page introduction
629 -
630 -[[image:image-20220723113448-7.png||height="1481" width="670"]]
631 -
632 -1.Display LA66 USB LoRaWAN Module connection status
633 -
634 -2.Check and reconnect
635 -
636 -3.Turn send timestamps on or off
637 -
638 -4.Display LoRaWan connection status
639 -
640 -5.Check LoRaWan connection status
641 -
642 -6.The RSSI value of the node when the ACK is received
643 -
644 -7.Node's Signal Strength Icon
645 -
646 -8.Set the packet sending interval of the node in seconds
647 -
648 -9.AT command input box
649 -
650 -10.Send AT command button
651 -
652 -11.Node log box
653 -
654 -12.clear log button
655 -
656 -13.exit button
657 -
658 -
659 -LA66 USB LoRaWAN Module not connected
660 -
661 -[[image:image-20220723110520-5.png||height="903" width="677"]]
662 -
663 -
664 -
665 -Connect LA66 USB LoRaWAN Module
666 -
667 -[[image:image-20220723110626-6.png||height="906" width="680"]]
668 -
669 -
670 -
671 -=== 3.8.2 Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
672 -
673 -
674 -**1.  Register LA66 USB LoRaWAN Module to TTNV3**
675 -
676 -[[image:image-20220723134549-8.png]]
677 -
678 -
679 -
680 -**2.  Open Node-RED,And import the JSON file to generate the flow**
681 -
682 -Sample JSON file please go to this link to download：放置JSON文件的链接
683 -
684 -For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
685 -
686 -The following is the positioning effect map
687 -
688 -[[image:image-20220723144339-1.png]]
689 -
690 -
691 -
692 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
693 -
694 -
695 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
696 -
697 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
698 -
699 -[[image:image-20220723150132-2.png]]
700 -
701 -
702 -
703 -= 4.  Order Info =
704 -
705 -
706 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
707 -
708 -
709 -(% style="color:blue" %)**XXX**(%%): The default frequency band
710 -
711 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
712 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
713 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
714 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
715 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
716 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
717 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
718 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
719 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
720 -
721 -
722 -= 5.  Reference =
723 -
724 -
725 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
310 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lu
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0