Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 106.1 >
edited by Herong Lu
on 2022/07/23 10:49
To version < 166.1 >
edited by Edwin Chen
on 2022/11/09 15:19
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Lu
1 +XWiki.Edwin
Content
... ... @@ -6,15 +6,15 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
10 += 1.  LA66 LoRaWAN Shield =
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 13  
13 +== 1.1  Overview ==
14 14  
15 +
15 15  (((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
17 +[[image:image-20220715000826-2.png||height="145" width="220"]]
18 18  )))
19 19  
20 20  (((
... ... @@ -22,13 +22,12 @@
22 22  )))
23 23  
24 24  (((
25 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
25 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 26  )))
27 -)))
28 28  
29 29  (((
30 30  (((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
30 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 32  )))
33 33  )))
34 34  
... ... @@ -36,8 +36,10 @@
36 36  (((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 38  )))
38 +)))
39 39  
40 40  (((
41 +(((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 42  )))
43 43  )))
... ... @@ -52,10 +52,12 @@
52 52  
53 53  == 1.2  Features ==
54 54  
55 -* Support LoRaWAN v1.0.4 protocol
56 +
57 +* Arduino Shield base on LA66 LoRaWAN module
58 +* Support LoRaWAN v1.0.3 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
58 -* SMD Antenna pad and i-pex antenna connector
61 +* SMA connector
59 59  * Available in different frequency LoRaWAN frequency bands.
60 60  * World-wide unique OTAA keys.
61 61  * AT Command via UART-TTL interface
... ... @@ -65,6 +65,7 @@
65 65  
66 66  == 1.3  Specification ==
67 67  
71 +
68 68  * CPU: 32-bit 48 MHz
69 69  * Flash: 256KB
70 70  * RAM: 64KB
... ... @@ -84,478 +84,353 @@
84 84  * I/O Voltage: 3.3v
85 85  
86 86  
87 -== 1.4  AT Command ==
91 +== 1.4  Pin Mapping & LED ==
88 88  
89 89  
90 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
94 +[[image:image-20220817085048-1.png||height="533" width="734"]]
91 91  
92 92  
93 93  
94 -== 1.5  Dimension ==
98 +~1. The LED lights up red when there is an upstream data packet
99 +2. When the network is successfully connected, the green light will be on for 5 seconds
100 +3. Purple light on when receiving downlink data packets
95 95  
96 -[[image:image-20220718094750-3.png]]
97 97  
103 +[[image:image-20220820112305-1.png||height="515" width="749"]]
98 98  
99 99  
100 -== 1.6  Pin Mapping ==
101 101  
102 -[[image:image-20220720111850-1.png]]
107 +== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
103 103  
104 104  
110 +**Show connection diagram：**
105 105  
106 -== 1.7  Land Pattern ==
107 107  
108 -[[image:image-20220517072821-2.png]]
113 +[[image:image-20220723170210-2.png||height="908" width="681"]]
109 109  
110 110  
111 111  
112 -= 2.  LA66 LoRaWAN Shield =
117 +(% style="color:blue" %)**1.  open Arduino IDE**
113 113  
114 114  
115 -== 2.1  Overview ==
120 +[[image:image-20220723170545-4.png]]
116 116  
117 117  
118 -(((
119 -[[image:image-20220715000826-2.png||height="145" width="220"]]
120 -)))
121 121  
122 -(((
123 -
124 -)))
124 +(% style="color:blue" %)**2.  Open project**
125 125  
126 -(((
127 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
128 -)))
129 129  
130 -(((
131 -(((
132 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
133 -)))
134 -)))
127 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
135 135  
136 -(((
137 -(((
138 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
139 -)))
140 -)))
129 +[[image:image-20220726135239-1.png]]
141 141  
142 -(((
143 -(((
144 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
145 -)))
146 -)))
147 147  
148 -(((
149 -(((
150 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
151 -)))
152 -)))
153 153  
133 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
154 154  
155 155  
156 -== 2.2  Features ==
136 +[[image:image-20220726135356-2.png]]
157 157  
158 -* Arduino Shield base on LA66 LoRaWAN module
159 -* Support LoRaWAN v1.0.4 protocol
160 -* Support peer-to-peer protocol
161 -* TCXO crystal to ensure RF performance on low temperature
162 -* SMA connector
163 -* Available in different frequency LoRaWAN frequency bands.
164 -* World-wide unique OTAA keys.
165 -* AT Command via UART-TTL interface
166 -* Firmware upgradable via UART interface
167 -* Ultra-long RF range
168 168  
169 169  
170 -== 2.3  Specification ==
140 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
171 171  
172 -* CPU: 32-bit 48 MHz
173 -* Flash: 256KB
174 -* RAM: 64KB
175 -* Input Power Range: 1.8v ~~ 3.7v
176 -* Power Consumption: < 4uA.
177 -* Frequency Range: 150 MHz ~~ 960 MHz
178 -* Maximum Power +22 dBm constant RF output
179 -* High sensitivity: -148 dBm
180 -* Temperature:
181 -** Storage: -55 ~~ +125℃
182 -** Operating: -40 ~~ +85℃
183 -* Humidity:
184 -** Storage: 5 ~~ 95% (Non-Condensing)
185 -** Operating: 10 ~~ 95% (Non-Condensing)
186 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
187 -* LoRa Rx current: <9 mA
188 -* I/O Voltage: 3.3v
189 189  
143 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
190 190  
191 -== 2.4  Pin Mapping & LED ==
192 192  
193 193  
147 +== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
194 194  
195 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
196 196  
150 +(% style="color:blue" %)**1.  Open project**
197 197  
198 198  
199 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
153 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
200 200  
201 201  
156 +[[image:image-20220723172502-8.png]]
202 202  
203 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
204 204  
205 205  
160 +(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
206 206  
207 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
208 208  
163 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
209 209  
210 -=== 2.8.1  Items needed for update ===
211 211  
212 -1. LA66 LoRaWAN Shield
213 -1. Arduino
214 -1. USB TO TTL Adapter
215 215  
216 -[[image:image-20220602100052-2.png||height="385" width="600"]]
167 +== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
217 217  
218 218  
219 -=== 2.8.2  Connection ===
170 +(% style="color:blue" %)**1.  Open project**
220 220  
221 221  
222 -[[image:image-20220602101311-3.png||height="276" width="600"]]
173 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0>>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
223 223  
224 224  
225 -(((
226 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
227 -)))
176 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
228 228  
229 -(((
230 -(% style="background-color:yellow" %)**GND  <-> GND
231 -TXD  <->  TXD
232 -RXD  <->  RXD**
233 -)))
234 234  
235 235  
236 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
180 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
237 237  
238 -Connect USB TTL Adapter to PC after connecting the wires
239 239  
183 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
240 240  
241 -[[image:image-20220602102240-4.png||height="304" width="600"]]
242 242  
243 243  
244 -=== 2.8.3  Upgrade steps ===
245 245  
246 246  
247 -==== 1.  Switch SW1 to put in ISP position ====
189 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
248 248  
249 249  
250 -[[image:image-20220602102824-5.png||height="306" width="600"]]
192 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
251 251  
252 252  
195 +[[image:image-20220723175700-12.png||height="602" width="995"]]
253 253  
254 -==== 2.  Press the RST switch once ====
255 255  
256 256  
257 -[[image:image-20220602104701-12.png||height="285" width="600"]]
199 +== 1.8  Example: How to join helium ==
258 258  
259 259  
202 +(% style="color:blue" %)**1.  Create a new device.**
260 260  
261 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
262 262  
205 +[[image:image-20220907165500-1.png||height="464" width="940"]]
263 263  
264 -(((
265 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
266 -)))
267 267  
268 268  
269 -[[image:image-20220602103227-6.png]]
209 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
270 270  
271 271  
272 -[[image:image-20220602103357-7.png]]
212 +[[image:image-20220907165837-2.png||height="375" width="809"]]
273 273  
274 274  
275 275  
276 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
277 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
216 +(% style="color:blue" %)**3.  Use AT commands.**
278 278  
279 279  
280 -[[image:image-20220602103844-8.png]]
219 +[[image:image-20220602100052-2.png||height="385" width="600"]]
281 281  
282 282  
283 283  
284 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
285 -(% style="color:blue" %)**3. Select the bin file to burn**
223 +(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
286 286  
287 287  
288 -[[image:image-20220602104144-9.png]]
226 +[[image:image-20220907170308-3.png||height="556" width="617"]]
289 289  
290 290  
291 -[[image:image-20220602104251-10.png]]
292 292  
230 +(% style="color:blue" %)**5.  Network successfully.**
293 293  
294 -[[image:image-20220602104402-11.png]]
295 295  
233 +[[image:image-20220907170436-4.png]]
296 296  
297 297  
298 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
299 -(% style="color:blue" %)**4. Click to start the download**
300 300  
301 -[[image:image-20220602104923-13.png]]
237 +(% style="color:blue" %)**6.  Send uplink using command**
302 302  
303 303  
240 +[[image:image-20220912084334-1.png]]
304 304  
305 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
306 -(% style="color:blue" %)**5. Check update process**
307 307  
243 +[[image:image-20220912084412-3.png]]
308 308  
309 -[[image:image-20220602104948-14.png]]
310 310  
311 311  
247 +[[image:image-20220907170744-6.png||height="242" width="798"]]
312 312  
313 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
314 -(% style="color:blue" %)**The following picture shows that the burning is successful**
315 315  
316 -[[image:image-20220602105251-15.png]]
317 317  
251 +== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
318 318  
319 319  
320 -= 3.  LA66 USB LoRaWAN Adapter =
254 +=== 1.9.1  Items needed for update ===
321 321  
322 322  
323 -== 3.1  Overview ==
257 +1. LA66 LoRaWAN Shield
258 +1. Arduino
259 +1. USB TO TTL Adapter
324 324  
261 +[[image:image-20220602100052-2.png||height="385" width="600"]]
325 325  
326 -[[image:image-20220715001142-3.png||height="145" width="220"]]
327 327  
328 328  
329 -(((
330 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
331 -)))
265 +=== 1.9.2  Connection ===
332 332  
333 -(((
334 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
335 -)))
336 336  
337 -(((
338 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
339 -)))
268 +[[image:image-20220602101311-3.png||height="276" width="600"]]
340 340  
341 -(((
342 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
343 -)))
344 344  
345 345  (((
346 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
272 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
347 347  )))
348 348  
349 -
350 -
351 -== 3.2  Features ==
352 -
353 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
354 -* Ultra-long RF range
355 -* Support LoRaWAN v1.0.4 protocol
356 -* Support peer-to-peer protocol
357 -* TCXO crystal to ensure RF performance on low temperature
358 -* Spring RF antenna
359 -* Available in different frequency LoRaWAN frequency bands.
360 -* World-wide unique OTAA keys.
361 -* AT Command via UART-TTL interface
362 -* Firmware upgradable via UART interface
363 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
364 -
365 -
366 -== 3.3  Specification ==
367 -
368 -* CPU: 32-bit 48 MHz
369 -* Flash: 256KB
370 -* RAM: 64KB
371 -* Input Power Range: 5v
372 -* Frequency Range: 150 MHz ~~ 960 MHz
373 -* Maximum Power +22 dBm constant RF output
374 -* High sensitivity: -148 dBm
375 -* Temperature:
376 -** Storage: -55 ~~ +125℃
377 -** Operating: -40 ~~ +85℃
378 -* Humidity:
379 -** Storage: 5 ~~ 95% (Non-Condensing)
380 -** Operating: 10 ~~ 95% (Non-Condensing)
381 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
382 -* LoRa Rx current: <9 mA
383 -
384 -
385 -== 3.4  Pin Mapping & LED ==
386 -
387 -
388 -
389 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
390 -
391 -
392 392  (((
393 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
276 +(% style="background-color:yellow" %)**GND  <-> GND
277 +TXD  <->  TXD
278 +RXD  <->  RXD**
394 394  )))
395 395  
396 396  
397 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
282 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
398 398  
284 +Connect USB TTL Adapter to PC after connecting the wires
399 399  
400 -[[image:image-20220723100027-1.png]]
401 401  
287 +[[image:image-20220602102240-4.png||height="304" width="600"]]
402 402  
403 -Open the serial port tool
404 404  
405 -[[image:image-20220602161617-8.png]]
406 406  
407 -[[image:image-20220602161718-9.png||height="457" width="800"]]
291 +=== 1.9.3  Upgrade steps ===
408 408  
409 409  
410 410  
411 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
295 +==== (% style="color:blue" %)**1.  Switch SW1 to put in ISP position**(%%) ====
412 412  
413 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
414 414  
298 +[[image:image-20220602102824-5.png||height="306" width="600"]]
415 415  
416 -[[image:image-20220602161935-10.png||height="498" width="800"]]
417 417  
418 418  
419 419  
420 -(% style="color:blue" %)**3. See Uplink Command**
303 +==== (% style="color:blue" %)**2.  Press the RST switch once**(%%) ====
421 421  
422 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
423 423  
424 -example: AT+SENDB=01,02,8,05820802581ea0a5
306 +[[image:image-20220817085447-1.png]]
425 425  
426 -[[image:image-20220602162157-11.png||height="497" width="800"]]
427 427  
428 428  
429 429  
430 -(% style="color:blue" %)**4. Check to see if TTN received the message**
311 +==== (% style="color:blue" %)**3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**(%%) ====
431 431  
432 -[[image:image-20220602162331-12.png||height="420" width="800"]]
433 433  
434 434  
315 +(((
316 +(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
317 +)))
435 435  
436 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
437 437  
320 +[[image:image-20220602103227-6.png]]
438 438  
439 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
440 440  
441 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
323 +[[image:image-20220602103357-7.png]]
442 442  
443 -(% style="color:red" %)**Preconditions:**
444 444  
445 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
446 446  
447 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
327 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
328 +(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
448 448  
449 449  
331 +[[image:image-20220602103844-8.png]]
450 450  
451 -(% style="color:blue" %)**Steps for usage:**
452 452  
453 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
454 454  
455 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
335 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
336 +(% style="color:blue" %)**3.  Select the bin file to burn**
456 456  
457 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
458 458  
339 +[[image:image-20220602104144-9.png]]
459 459  
460 460  
461 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
342 +[[image:image-20220602104251-10.png]]
462 462  
463 463  
464 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
345 +[[image:image-20220602104402-11.png]]
465 465  
466 466  
467 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
468 468  
469 -[[image:image-20220723100439-2.png]]
349 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
350 +(% style="color:blue" %)**4.  Click to start the download**
470 470  
471 471  
353 +[[image:image-20220602104923-13.png]]
472 472  
473 -(% style="color:blue" %)**2. Install Minicom in RPi.**
474 474  
475 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
476 476  
477 - (% style="background-color:yellow" %)**apt update**
357 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
358 +(% style="color:blue" %)**5.  Check update process**
478 478  
479 - (% style="background-color:yellow" %)**apt install minicom**
480 480  
361 +[[image:image-20220602104948-14.png]]
481 481  
482 -Use minicom to connect to the RPI's terminal
483 483  
484 -[[image:image-20220602153146-3.png||height="439" width="500"]]
485 485  
365 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
366 +(% style="color:blue" %)**The following picture shows that the burning is successful**
486 486  
487 487  
488 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
369 +[[image:image-20220602105251-15.png]]
489 489  
490 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
491 491  
492 492  
493 -[[image:image-20220602154928-5.png||height="436" width="500"]]
373 += 2.  FAQ =
494 494  
495 495  
376 +== 2.1  How to Compile Source Code for LA66? ==
496 496  
497 -(% style="color:blue" %)**4. Send Uplink message**
498 498  
499 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
379 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
500 500  
501 -example: AT+SENDB=01,02,8,05820802581ea0a5
502 502  
503 503  
504 -[[image:image-20220602160339-6.png||height="517" width="600"]]
383 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
505 505  
506 506  
386 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:.Instruction for LA66 Peer to Peer firmware.WebHome]]
507 507  
508 -Check to see if TTN received the message
509 509  
510 -[[image:image-20220602160627-7.png||height="369" width="800"]]
511 511  
390 += 3.  Order Info =
512 512  
513 513  
514 -== 3.8  Example: Use of LA66 USB LoRaWAN Module and DRAGINO-LA66-APP. ==
393 +**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
515 515  
516 -=== 3.8.1 DRAGINO-LA66-APP ===
517 517  
518 -[[image:image-20220723102027-3.png]]
396 +(% style="color:blue" %)**XXX**(%%): The default frequency band
519 519  
520 -==== Overview： ====
398 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
399 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
400 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
401 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
402 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
403 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
404 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
405 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
406 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
521 521  
522 -DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Module. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Module.（DRAGINO-LA66-APP currently only supports Android system）
523 523  
524 -==== Conditions of Use： ====
409 += 4.  Reference =
525 525  
526 -Requires a type-c to USB adapter
527 527  
528 -[[image:image-20220723104754-4.png]]
412 +* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
529 529  
530 -==== Use of APP: ====
531 531  
532 -LA66 USB LoRaWAN Module not connected
415 += 5.  FCC Statement =
533 533  
534 534  
418 +(% style="color:red" %)**FCC Caution:**
535 535  
536 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
420 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
537 537  
422 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
538 538  
539 539  
425 +(% style="color:red" %)**IMPORTANT NOTE: **
540 540  
541 -= 4.  Order Info =
427 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
542 542  
429 +—Reorient or relocate the receiving antenna.
543 543  
544 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
431 +—Increase the separation between the equipment and receiver.
545 545  
433 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
546 546  
547 -(% style="color:blue" %)**XXX**(%%): The default frequency band
435 +—Consult the dealer or an experienced radio/TV technician for help.
548 548  
549 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
550 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
551 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
552 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
553 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
554 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
555 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
556 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
557 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
558 558  
559 -= 5.  Reference =
438 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
560 560  
561 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
440 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0