Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 100.5 >
edited by Xiaoling
on 2022/07/19 11:45
To version < 166.1 >
edited by Edwin Chen
on 2022/11/09 15:19
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -6,15 +6,15 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
10 += 1.  LA66 LoRaWAN Shield =
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 13  
13 +== 1.1  Overview ==
14 14  
15 +
15 15  (((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
17 +[[image:image-20220715000826-2.png||height="145" width="220"]]
18 18  )))
19 19  
20 20  (((
... ... @@ -22,13 +22,12 @@
22 22  )))
23 23  
24 24  (((
25 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
25 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 26  )))
27 -)))
28 28  
29 29  (((
30 30  (((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
30 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 32  )))
33 33  )))
34 34  
... ... @@ -36,8 +36,10 @@
36 36  (((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 38  )))
38 +)))
39 39  
40 40  (((
41 +(((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 42  )))
43 43  )))
... ... @@ -52,10 +52,12 @@
52 52  
53 53  == 1.2  Features ==
54 54  
55 -* Support LoRaWAN v1.0.4 protocol
56 +
57 +* Arduino Shield base on LA66 LoRaWAN module
58 +* Support LoRaWAN v1.0.3 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
58 -* SMD Antenna pad and i-pex antenna connector
61 +* SMA connector
59 59  * Available in different frequency LoRaWAN frequency bands.
60 60  * World-wide unique OTAA keys.
61 61  * AT Command via UART-TTL interface
... ... @@ -62,8 +62,10 @@
62 62  * Firmware upgradable via UART interface
63 63  * Ultra-long RF range
64 64  
68 +
65 65  == 1.3  Specification ==
66 66  
71 +
67 67  * CPU: 32-bit 48 MHz
68 68  * Flash: 256KB
69 69  * RAM: 64KB
... ... @@ -82,463 +82,354 @@
82 82  * LoRa Rx current: <9 mA
83 83  * I/O Voltage: 3.3v
84 84  
85 -== 1.4  AT Command ==
86 86  
91 +== 1.4  Pin Mapping & LED ==
87 87  
88 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
89 89  
94 +[[image:image-20220817085048-1.png||height="533" width="734"]]
90 90  
91 91  
92 -== 1.5  Dimension ==
93 93  
94 -[[image:image-20220718094750-3.png]]
98 +~1. The LED lights up red when there is an upstream data packet
99 +2. When the network is successfully connected, the green light will be on for 5 seconds
100 +3. Purple light on when receiving downlink data packets
95 95  
96 96  
103 +[[image:image-20220820112305-1.png||height="515" width="749"]]
97 97  
98 98  
99 -== 1.6  Pin Mapping ==
100 100  
107 +== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
101 101  
102 -[[image:image-20220719093156-1.png]]
103 103  
110 +**Show connection diagram：**
104 104  
105 105  
106 -== 1.7  Land Pattern ==
113 +[[image:image-20220723170210-2.png||height="908" width="681"]]
107 107  
108 -[[image:image-20220517072821-2.png]]
109 109  
110 110  
117 +(% style="color:blue" %)**1.  open Arduino IDE**
111 111  
112 -= 2.  LA66 LoRaWAN Shield =
113 113  
120 +[[image:image-20220723170545-4.png]]
114 114  
115 -== 2.1  Overview ==
116 116  
117 117  
118 -(((
119 -[[image:image-20220715000826-2.png||height="145" width="220"]]
120 -)))
124 +(% style="color:blue" %)**2.  Open project**
121 121  
122 -(((
123 -
124 -)))
125 125  
126 -(((
127 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
128 -)))
127 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
129 129  
130 -(((
131 -(((
132 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
133 -)))
134 -)))
129 +[[image:image-20220726135239-1.png]]
135 135  
136 -(((
137 -(((
138 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
139 -)))
140 -)))
141 141  
142 -(((
143 -(((
144 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
145 -)))
146 -)))
147 147  
148 -(((
149 -(((
150 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
151 -)))
152 -)))
133 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
153 153  
154 154  
136 +[[image:image-20220726135356-2.png]]
155 155  
156 -== 2.2  Features ==
157 157  
158 -* Arduino Shield base on LA66 LoRaWAN module
159 -* Support LoRaWAN v1.0.4 protocol
160 -* Support peer-to-peer protocol
161 -* TCXO crystal to ensure RF performance on low temperature
162 -* SMA connector
163 -* Available in different frequency LoRaWAN frequency bands.
164 -* World-wide unique OTAA keys.
165 -* AT Command via UART-TTL interface
166 -* Firmware upgradable via UART interface
167 -* Ultra-long RF range
168 168  
169 -== 2.3  Specification ==
140 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
170 170  
171 -* CPU: 32-bit 48 MHz
172 -* Flash: 256KB
173 -* RAM: 64KB
174 -* Input Power Range: 1.8v ~~ 3.7v
175 -* Power Consumption: < 4uA.
176 -* Frequency Range: 150 MHz ~~ 960 MHz
177 -* Maximum Power +22 dBm constant RF output
178 -* High sensitivity: -148 dBm
179 -* Temperature:
180 -** Storage: -55 ~~ +125℃
181 -** Operating: -40 ~~ +85℃
182 -* Humidity:
183 -** Storage: 5 ~~ 95% (Non-Condensing)
184 -** Operating: 10 ~~ 95% (Non-Condensing)
185 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
186 -* LoRa Rx current: <9 mA
187 -* I/O Voltage: 3.3v
188 188  
189 -== 2.4  Pin Mapping & LED ==
143 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
190 190  
191 191  
192 192  
193 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
147 +== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
194 194  
195 195  
150 +(% style="color:blue" %)**1.  Open project**
196 196  
197 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
198 198  
153 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
199 199  
200 200  
201 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
156 +[[image:image-20220723172502-8.png]]
202 202  
203 203  
204 204  
205 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
160 +(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
206 206  
207 207  
208 -=== 2.8.1  Items needed for update ===
163 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
209 209  
210 -1. LA66 LoRaWAN Shield
211 -1. Arduino
212 -1. USB TO TTL Adapter
213 213  
214 -[[image:image-20220602100052-2.png||height="385" width="600"]]
215 215  
167 +== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
216 216  
217 -=== 2.8.2  Connection ===
218 218  
170 +(% style="color:blue" %)**1.  Open project**
219 219  
220 -[[image:image-20220602101311-3.png||height="276" width="600"]]
221 221  
173 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0>>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
222 222  
223 -(((
224 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
225 -)))
226 226  
227 -(((
228 -(% style="background-color:yellow" %)**GND  <-> GND
229 -TXD  <->  TXD
230 -RXD  <->  RXD**
231 -)))
176 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
232 232  
233 233  
234 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
235 235  
236 -Connect USB TTL Adapter to PC after connecting the wires
180 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
237 237  
238 238  
239 -[[image:image-20220602102240-4.png||height="304" width="600"]]
183 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
240 240  
241 241  
242 -=== 2.8.3  Upgrade steps ===
243 243  
244 244  
245 -==== 1.  Switch SW1 to put in ISP position ====
246 246  
189 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
247 247  
248 -[[image:image-20220602102824-5.png||height="306" width="600"]]
249 249  
192 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
250 250  
251 251  
252 -==== 2.  Press the RST switch once ====
195 +[[image:image-20220723175700-12.png||height="602" width="995"]]
253 253  
254 254  
255 -[[image:image-20220602104701-12.png||height="285" width="600"]]
256 256  
199 +== 1.8  Example: How to join helium ==
257 257  
258 258  
259 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
202 +(% style="color:blue" %)**1.  Create a new device.**
260 260  
261 261  
262 -(((
263 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
264 -)))
205 +[[image:image-20220907165500-1.png||height="464" width="940"]]
265 265  
266 266  
267 -[[image:image-20220602103227-6.png]]
268 268  
209 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
269 269  
270 -[[image:image-20220602103357-7.png]]
271 271  
212 +[[image:image-20220907165837-2.png||height="375" width="809"]]
272 272  
273 273  
274 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
275 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
276 276  
216 +(% style="color:blue" %)**3.  Use AT commands.**
277 277  
278 -[[image:image-20220602103844-8.png]]
279 279  
219 +[[image:image-20220602100052-2.png||height="385" width="600"]]
280 280  
281 281  
282 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
283 -(% style="color:blue" %)**3. Select the bin file to burn**
284 284  
223 +(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
285 285  
286 -[[image:image-20220602104144-9.png]]
287 287  
226 +[[image:image-20220907170308-3.png||height="556" width="617"]]
288 288  
289 -[[image:image-20220602104251-10.png]]
290 290  
291 291  
292 -[[image:image-20220602104402-11.png]]
230 +(% style="color:blue" %)**5.  Network successfully.**
293 293  
294 294  
233 +[[image:image-20220907170436-4.png]]
295 295  
296 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
297 -(% style="color:blue" %)**4. Click to start the download**
298 298  
299 -[[image:image-20220602104923-13.png]]
300 300  
237 +(% style="color:blue" %)**6.  Send uplink using command**
301 301  
302 302  
303 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
304 -(% style="color:blue" %)**5. Check update process**
240 +[[image:image-20220912084334-1.png]]
305 305  
306 306  
307 -[[image:image-20220602104948-14.png]]
243 +[[image:image-20220912084412-3.png]]
308 308  
309 309  
310 310  
311 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
312 -(% style="color:blue" %)**The following picture shows that the burning is successful**
247 +[[image:image-20220907170744-6.png||height="242" width="798"]]
313 313  
314 -[[image:image-20220602105251-15.png]]
315 315  
316 316  
251 +== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
317 317  
318 -= 3.  LA66 USB LoRaWAN Adapter =
319 319  
254 +=== 1.9.1  Items needed for update ===
320 320  
321 -== 3.1  Overview ==
322 322  
257 +1. LA66 LoRaWAN Shield
258 +1. Arduino
259 +1. USB TO TTL Adapter
323 323  
324 -[[image:image-20220715001142-3.png||height="145" width="220"]]
261 +[[image:image-20220602100052-2.png||height="385" width="600"]]
325 325  
326 326  
327 -(((
328 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
329 -)))
330 330  
331 -(((
332 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
333 -)))
265 +=== 1.9.2  Connection ===
334 334  
335 -(((
336 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
337 -)))
338 338  
268 +[[image:image-20220602101311-3.png||height="276" width="600"]]
269 +
270 +
339 339  (((
340 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
272 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
341 341  )))
342 342  
343 343  (((
344 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
276 +(% style="background-color:yellow" %)**GND  <-> GND
277 +TXD  <->  TXD
278 +RXD  <->  RXD**
345 345  )))
346 346  
347 347  
282 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
348 348  
349 -== 3.2  Features ==
284 +Connect USB TTL Adapter to PC after connecting the wires
350 350  
351 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
352 -* Ultra-long RF range
353 -* Support LoRaWAN v1.0.4 protocol
354 -* Support peer-to-peer protocol
355 -* TCXO crystal to ensure RF performance on low temperature
356 -* Spring RF antenna
357 -* Available in different frequency LoRaWAN frequency bands.
358 -* World-wide unique OTAA keys.
359 -* AT Command via UART-TTL interface
360 -* Firmware upgradable via UART interface
361 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
362 362  
287 +[[image:image-20220602102240-4.png||height="304" width="600"]]
363 363  
364 364  
365 -== 3.3  Specification ==
366 366  
367 -* CPU: 32-bit 48 MHz
368 -* Flash: 256KB
369 -* RAM: 64KB
370 -* Input Power Range: 5v
371 -* Frequency Range: 150 MHz ~~ 960 MHz
372 -* Maximum Power +22 dBm constant RF output
373 -* High sensitivity: -148 dBm
374 -* Temperature:
375 -** Storage: -55 ~~ +125℃
376 -** Operating: -40 ~~ +85℃
377 -* Humidity:
378 -** Storage: 5 ~~ 95% (Non-Condensing)
379 -** Operating: 10 ~~ 95% (Non-Condensing)
380 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
381 -* LoRa Rx current: <9 mA
291 +=== 1.9.3  Upgrade steps ===
382 382  
383 383  
384 384  
385 -== 3.4  Pin Mapping & LED ==
295 +==== (% style="color:blue" %)**1.  Switch SW1 to put in ISP position**(%%) ====
386 386  
387 387  
298 +[[image:image-20220602102824-5.png||height="306" width="600"]]
388 388  
389 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
390 390  
391 391  
392 -(((
393 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
394 -)))
395 395  
303 +==== (% style="color:blue" %)**2.  Press the RST switch once**(%%) ====
396 396  
397 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
398 398  
306 +[[image:image-20220817085447-1.png]]
399 399  
400 -[[image:image-20220602171217-1.png||height="538" width="800"]]
401 401  
402 402  
403 -Open the serial port tool
404 404  
405 -[[image:image-20220602161617-8.png]]
311 +==== (% style="color:blue" %)**3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**(%%) ====
406 406  
407 -[[image:image-20220602161718-9.png||height="457" width="800"]]
408 408  
409 409  
315 +(((
316 +(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
317 +)))
410 410  
411 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
412 412  
413 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
320 +[[image:image-20220602103227-6.png]]
414 414  
415 415  
416 -[[image:image-20220602161935-10.png||height="498" width="800"]]
323 +[[image:image-20220602103357-7.png]]
417 417  
418 418  
419 419  
420 -(% style="color:blue" %)**3. See Uplink Command**
327 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
328 +(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
421 421  
422 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
423 423  
424 -example: AT+SENDB=01,02,8,05820802581ea0a5
331 +[[image:image-20220602103844-8.png]]
425 425  
426 -[[image:image-20220602162157-11.png||height="497" width="800"]]
427 427  
428 428  
335 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
336 +(% style="color:blue" %)**3.  Select the bin file to burn**
429 429  
430 -(% style="color:blue" %)**4. Check to see if TTN received the message**
431 431  
432 -[[image:image-20220602162331-12.png||height="420" width="800"]]
339 +[[image:image-20220602104144-9.png]]
433 433  
434 434  
342 +[[image:image-20220602104251-10.png]]
435 435  
436 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
437 437  
345 +[[image:image-20220602104402-11.png]]
438 438  
439 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
440 440  
441 441  
442 -(% style="color:red" %)**Preconditions:**
349 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
350 +(% style="color:blue" %)**4.  Click to start the download**
443 443  
444 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
445 445  
446 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
353 +[[image:image-20220602104923-13.png]]
447 447  
448 448  
449 449  
450 -(% style="color:blue" %)**Steps for usage:**
357 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
358 +(% style="color:blue" %)**5.  Check update process**
451 451  
452 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
453 453  
454 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
361 +[[image:image-20220602104948-14.png]]
455 455  
456 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
457 457  
458 458  
365 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
366 +(% style="color:blue" %)**The following picture shows that the burning is successful**
459 459  
460 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
461 461  
369 +[[image:image-20220602105251-15.png]]
462 462  
463 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
464 464  
465 465  
466 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
373 += 2.  FAQ =
467 467  
468 -[[image:image-20220602171233-2.png||height="538" width="800"]]
469 469  
376 +== 2.1  How to Compile Source Code for LA66? ==
470 470  
471 471  
472 -(% style="color:blue" %)**2. Install Minicom in RPi.**
379 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
473 473  
474 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
475 475  
476 - (% style="background-color:yellow" %)**apt update**
477 477  
478 - (% style="background-color:yellow" %)**apt install minicom**
383 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
479 479  
480 480  
481 -Use minicom to connect to the RPI's terminal
386 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:.Instruction for LA66 Peer to Peer firmware.WebHome]]
482 482  
483 -[[image:image-20220602153146-3.png||height="439" width="500"]]
484 484  
485 485  
390 += 3.  Order Info =
486 486  
487 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
488 488  
489 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
393 +**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
490 490  
491 491  
492 -[[image:image-20220602154928-5.png||height="436" width="500"]]
396 +(% style="color:blue" %)**XXX**(%%): The default frequency band
493 493  
398 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
399 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
400 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
401 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
402 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
403 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
404 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
405 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
406 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
494 494  
495 495  
496 -(% style="color:blue" %)**4. Send Uplink message**
409 += 4.  Reference =
497 497  
498 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
499 499  
500 -example: AT+SENDB=01,02,8,05820802581ea0a5
412 +* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
501 501  
502 502  
503 -[[image:image-20220602160339-6.png||height="517" width="600"]]
415 += 5.  FCC Statement =
504 504  
505 505  
418 +(% style="color:red" %)**FCC Caution:**
506 506  
507 -Check to see if TTN received the message
420 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
508 508  
509 -[[image:image-20220602160627-7.png||height="369" width="800"]]
422 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
510 510  
511 511  
425 +(% style="color:red" %)**IMPORTANT NOTE: **
512 512  
513 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
427 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
514 514  
429 +—Reorient or relocate the receiving antenna.
515 515  
431 +—Increase the separation between the equipment and receiver.
516 516  
517 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
433 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
518 518  
435 +—Consult the dealer or an experienced radio/TV technician for help.
519 519  
520 520  
438 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
521 521  
522 -= 4.  Order Info =
523 -
524 -
525 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
526 -
527 -
528 -(% style="color:blue" %)**XXX**(%%): The default frequency band
529 -
530 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
531 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
532 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
533 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
534 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
535 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
536 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
537 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
538 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
539 -
540 -
541 -
542 -= 5.  Reference =
543 -
544 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
440 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0