Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 100.3 >
edited by Xiaoling
on 2022/07/19 11:41
To version < 166.1 >
edited by Edwin Chen
on 2022/11/09 15:19
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -6,15 +6,15 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
10 += 1.  LA66 LoRaWAN Shield =
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 13  
13 +== 1.1  Overview ==
14 14  
15 +
15 15  (((
16 -(((
17 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
17 +[[image:image-20220715000826-2.png||height="145" width="220"]]
18 18  )))
19 19  
20 20  (((
... ... @@ -22,13 +22,12 @@
22 22  )))
23 23  
24 24  (((
25 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
25 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
26 26  )))
27 -)))
28 28  
29 29  (((
30 30  (((
31 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
30 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
32 32  )))
33 33  )))
34 34  
... ... @@ -36,8 +36,10 @@
36 36  (((
37 37  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
38 38  )))
38 +)))
39 39  
40 40  (((
41 +(((
41 41  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
42 42  )))
43 43  )))
... ... @@ -52,10 +52,12 @@
52 52  
53 53  == 1.2  Features ==
54 54  
55 -* Support LoRaWAN v1.0.4 protocol
56 +
57 +* Arduino Shield base on LA66 LoRaWAN module
58 +* Support LoRaWAN v1.0.3 protocol
56 56  * Support peer-to-peer protocol
57 57  * TCXO crystal to ensure RF performance on low temperature
58 -* SMD Antenna pad and i-pex antenna connector
61 +* SMA connector
59 59  * Available in different frequency LoRaWAN frequency bands.
60 60  * World-wide unique OTAA keys.
61 61  * AT Command via UART-TTL interface
... ... @@ -63,9 +63,9 @@
63 63  * Ultra-long RF range
64 64  
65 65  
66 -
67 67  == 1.3  Specification ==
68 68  
71 +
69 69  * CPU: 32-bit 48 MHz
70 70  * Flash: 256KB
71 71  * RAM: 64KB
... ... @@ -85,458 +85,353 @@
85 85  * I/O Voltage: 3.3v
86 86  
87 87  
91 +== 1.4  Pin Mapping & LED ==
88 88  
89 -== 1.4  AT Command ==
90 90  
94 +[[image:image-20220817085048-1.png||height="533" width="734"]]
91 91  
92 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
93 93  
94 94  
98 +~1. The LED lights up red when there is an upstream data packet
99 +2. When the network is successfully connected, the green light will be on for 5 seconds
100 +3. Purple light on when receiving downlink data packets
95 95  
96 -== 1.5  Dimension ==
97 97  
98 -[[image:image-20220718094750-3.png]]
103 +[[image:image-20220820112305-1.png||height="515" width="749"]]
99 99  
100 100  
101 101  
107 +== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
102 102  
103 -== 1.6  Pin Mapping ==
104 104  
110 +**Show connection diagram：**
105 105  
106 -[[image:image-20220719093156-1.png]]
107 107  
113 +[[image:image-20220723170210-2.png||height="908" width="681"]]
108 108  
109 109  
110 -== 1.7  Land Pattern ==
111 111  
112 -[[image:image-20220517072821-2.png]]
117 +(% style="color:blue" %)**1.  open Arduino IDE**
113 113  
114 114  
120 +[[image:image-20220723170545-4.png]]
115 115  
116 -= 2.  LA66 LoRaWAN Shield =
117 117  
118 118  
119 -== 2.1  Overview ==
124 +(% style="color:blue" %)**2.  Open project**
120 120  
121 121  
122 -(((
123 -[[image:image-20220715000826-2.png||height="145" width="220"]]
124 -)))
127 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
125 125  
126 -(((
127 -
128 -)))
129 +[[image:image-20220726135239-1.png]]
129 129  
130 -(((
131 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
132 -)))
133 133  
134 -(((
135 -(((
136 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
137 -)))
138 -)))
139 139  
140 -(((
141 -(((
142 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
143 -)))
144 -)))
133 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
145 145  
146 -(((
147 -(((
148 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
149 -)))
150 -)))
151 151  
152 -(((
153 -(((
154 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
155 -)))
156 -)))
136 +[[image:image-20220726135356-2.png]]
157 157  
158 158  
159 159  
160 -== 2.2  Features ==
140 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
161 161  
162 -* Arduino Shield base on LA66 LoRaWAN module
163 -* Support LoRaWAN v1.0.4 protocol
164 -* Support peer-to-peer protocol
165 -* TCXO crystal to ensure RF performance on low temperature
166 -* SMA connector
167 -* Available in different frequency LoRaWAN frequency bands.
168 -* World-wide unique OTAA keys.
169 -* AT Command via UART-TTL interface
170 -* Firmware upgradable via UART interface
171 -* Ultra-long RF range
172 172  
143 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
173 173  
174 174  
175 -== 2.3  Specification ==
176 176  
177 -* CPU: 32-bit 48 MHz
178 -* Flash: 256KB
179 -* RAM: 64KB
180 -* Input Power Range: 1.8v ~~ 3.7v
181 -* Power Consumption: < 4uA.
182 -* Frequency Range: 150 MHz ~~ 960 MHz
183 -* Maximum Power +22 dBm constant RF output
184 -* High sensitivity: -148 dBm
185 -* Temperature:
186 -** Storage: -55 ~~ +125℃
187 -** Operating: -40 ~~ +85℃
188 -* Humidity:
189 -** Storage: 5 ~~ 95% (Non-Condensing)
190 -** Operating: 10 ~~ 95% (Non-Condensing)
191 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
192 -* LoRa Rx current: <9 mA
193 -* I/O Voltage: 3.3v
147 +== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
194 194  
195 195  
150 +(% style="color:blue" %)**1.  Open project**
196 196  
197 -== 2.4  Pin Mapping & LED ==
198 198  
153 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
199 199  
200 200  
201 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
156 +[[image:image-20220723172502-8.png]]
202 202  
203 203  
204 204  
205 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
160 +(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
206 206  
207 207  
163 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
208 208  
209 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
210 210  
211 211  
167 +== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
212 212  
213 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
214 214  
170 +(% style="color:blue" %)**1.  Open project**
215 215  
216 -=== 2.8.1  Items needed for update ===
217 217  
218 -1. LA66 LoRaWAN Shield
219 -1. Arduino
220 -1. USB TO TTL Adapter
173 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0>>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
221 221  
222 222  
176 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
223 223  
224 -[[image:image-20220602100052-2.png||height="385" width="600"]]
225 225  
226 226  
227 -=== 2.8.2  Connection ===
180 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
228 228  
229 229  
230 -[[image:image-20220602101311-3.png||height="276" width="600"]]
183 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
231 231  
232 232  
233 -(((
234 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
235 -)))
236 236  
237 -(((
238 -(% style="background-color:yellow" %)**GND  <-> GND
239 -TXD  <->  TXD
240 -RXD  <->  RXD**
241 -)))
242 242  
243 243  
244 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
189 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
245 245  
246 -Connect USB TTL Adapter to PC after connecting the wires
247 247  
192 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
248 248  
249 -[[image:image-20220602102240-4.png||height="304" width="600"]]
250 250  
195 +[[image:image-20220723175700-12.png||height="602" width="995"]]
251 251  
252 -=== 2.8.3  Upgrade steps ===
253 253  
254 254  
255 -==== 1.  Switch SW1 to put in ISP position ====
199 +== 1.8  Example: How to join helium ==
256 256  
257 257  
258 -[[image:image-20220602102824-5.png||height="306" width="600"]]
202 +(% style="color:blue" %)**1.  Create a new device.**
259 259  
260 260  
205 +[[image:image-20220907165500-1.png||height="464" width="940"]]
261 261  
262 -==== 2.  Press the RST switch once ====
263 263  
264 264  
265 -[[image:image-20220602104701-12.png||height="285" width="600"]]
209 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
266 266  
267 267  
212 +[[image:image-20220907165837-2.png||height="375" width="809"]]
268 268  
269 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
270 270  
271 271  
272 -(((
273 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
274 -)))
216 +(% style="color:blue" %)**3.  Use AT commands.**
275 275  
276 276  
277 -[[image:image-20220602103227-6.png]]
219 +[[image:image-20220602100052-2.png||height="385" width="600"]]
278 278  
279 279  
280 -[[image:image-20220602103357-7.png]]
281 281  
223 +(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
282 282  
283 283  
284 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
285 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
226 +[[image:image-20220907170308-3.png||height="556" width="617"]]
286 286  
287 287  
288 -[[image:image-20220602103844-8.png]]
289 289  
230 +(% style="color:blue" %)**5.  Network successfully.**
290 290  
291 291  
292 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
293 -(% style="color:blue" %)**3. Select the bin file to burn**
233 +[[image:image-20220907170436-4.png]]
294 294  
295 295  
296 -[[image:image-20220602104144-9.png]]
297 297  
237 +(% style="color:blue" %)**6.  Send uplink using command**
298 298  
299 -[[image:image-20220602104251-10.png]]
300 300  
240 +[[image:image-20220912084334-1.png]]
301 301  
302 -[[image:image-20220602104402-11.png]]
303 303  
243 +[[image:image-20220912084412-3.png]]
304 304  
305 305  
306 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
307 -(% style="color:blue" %)**4. Click to start the download**
308 308  
309 -[[image:image-20220602104923-13.png]]
247 +[[image:image-20220907170744-6.png||height="242" width="798"]]
310 310  
311 311  
312 312  
313 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
314 -(% style="color:blue" %)**5. Check update process**
251 +== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
315 315  
316 316  
317 -[[image:image-20220602104948-14.png]]
254 +=== 1.9.1  Items needed for update ===
318 318  
319 319  
257 +1. LA66 LoRaWAN Shield
258 +1. Arduino
259 +1. USB TO TTL Adapter
320 320  
321 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
322 -(% style="color:blue" %)**The following picture shows that the burning is successful**
261 +[[image:image-20220602100052-2.png||height="385" width="600"]]
323 323  
324 -[[image:image-20220602105251-15.png]]
325 325  
326 326  
265 +=== 1.9.2  Connection ===
327 327  
328 -= 3.  LA66 USB LoRaWAN Adapter =
329 329  
268 +[[image:image-20220602101311-3.png||height="276" width="600"]]
330 330  
331 -== 3.1  Overview ==
332 332  
271 +(((
272 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
273 +)))
333 333  
334 -[[image:image-20220715001142-3.png||height="145" width="220"]]
275 +(((
276 +(% style="background-color:yellow" %)**GND  <-> GND
277 +TXD  <->  TXD
278 +RXD  <->  RXD**
279 +)))
335 335  
336 336  
337 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
282 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
338 338  
339 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
284 +Connect USB TTL Adapter to PC after connecting the wires
340 340  
341 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
342 342  
343 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
287 +[[image:image-20220602102240-4.png||height="304" width="600"]]
344 344  
345 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
346 346  
347 347  
291 +=== 1.9.3  Upgrade steps ===
348 348  
349 -== 3.2  Features ==
350 350  
351 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
352 -* Ultra-long RF range
353 -* Support LoRaWAN v1.0.4 protocol
354 -* Support peer-to-peer protocol
355 -* TCXO crystal to ensure RF performance on low temperature
356 -* Spring RF antenna
357 -* Available in different frequency LoRaWAN frequency bands.
358 -* World-wide unique OTAA keys.
359 -* AT Command via UART-TTL interface
360 -* Firmware upgradable via UART interface
361 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
362 362  
295 +==== (% style="color:blue" %)**1.  Switch SW1 to put in ISP position**(%%) ====
363 363  
364 364  
365 -== 3.3  Specification ==
298 +[[image:image-20220602102824-5.png||height="306" width="600"]]
366 366  
367 -* CPU: 32-bit 48 MHz
368 -* Flash: 256KB
369 -* RAM: 64KB
370 -* Input Power Range: 5v
371 -* Frequency Range: 150 MHz ~~ 960 MHz
372 -* Maximum Power +22 dBm constant RF output
373 -* High sensitivity: -148 dBm
374 -* Temperature:
375 -** Storage: -55 ~~ +125℃
376 -** Operating: -40 ~~ +85℃
377 -* Humidity:
378 -** Storage: 5 ~~ 95% (Non-Condensing)
379 -** Operating: 10 ~~ 95% (Non-Condensing)
380 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
381 -* LoRa Rx current: <9 mA
382 382  
383 383  
384 384  
385 -== 3.4  Pin Mapping & LED ==
303 +==== (% style="color:blue" %)**2.  Press the RST switch once**(%%) ====
386 386  
387 387  
306 +[[image:image-20220817085447-1.png]]
388 388  
389 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
390 390  
391 391  
392 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
393 393  
311 +==== (% style="color:blue" %)**3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**(%%) ====
394 394  
395 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
396 396  
397 397  
398 -[[image:image-20220602171217-1.png||height="538" width="800"]]
315 +(((
316 +(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
317 +)))
399 399  
400 400  
401 -Open the serial port tool
320 +[[image:image-20220602103227-6.png]]
402 402  
403 -[[image:image-20220602161617-8.png]]
404 404  
405 -[[image:image-20220602161718-9.png||height="457" width="800"]]
323 +[[image:image-20220602103357-7.png]]
406 406  
407 407  
408 408  
409 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
327 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
328 +(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
410 410  
411 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
412 412  
331 +[[image:image-20220602103844-8.png]]
413 413  
414 -[[image:image-20220602161935-10.png||height="498" width="800"]]
415 415  
416 416  
335 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
336 +(% style="color:blue" %)**3.  Select the bin file to burn**
417 417  
418 -(% style="color:blue" %)**3. See Uplink Command**
419 419  
420 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
339 +[[image:image-20220602104144-9.png]]
421 421  
422 -example: AT+SENDB=01,02,8,05820802581ea0a5
423 423  
424 -[[image:image-20220602162157-11.png||height="497" width="800"]]
342 +[[image:image-20220602104251-10.png]]
425 425  
426 426  
345 +[[image:image-20220602104402-11.png]]
427 427  
428 -(% style="color:blue" %)**4. Check to see if TTN received the message**
429 429  
430 -[[image:image-20220602162331-12.png||height="420" width="800"]]
431 431  
349 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
350 +(% style="color:blue" %)**4.  Click to start the download**
432 432  
433 433  
434 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
353 +[[image:image-20220602104923-13.png]]
435 435  
436 436  
437 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
438 438  
357 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
358 +(% style="color:blue" %)**5.  Check update process**
439 439  
440 -(% style="color:red" %)**Preconditions:**
441 441  
442 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
361 +[[image:image-20220602104948-14.png]]
443 443  
444 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
445 445  
446 446  
365 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
366 +(% style="color:blue" %)**The following picture shows that the burning is successful**
447 447  
448 -(% style="color:blue" %)**Steps for usage:**
449 449  
450 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
369 +[[image:image-20220602105251-15.png]]
451 451  
452 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
453 453  
454 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
455 455  
373 += 2.  FAQ =
456 456  
457 457  
458 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
376 +== 2.1  How to Compile Source Code for LA66? ==
459 459  
460 460  
461 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
379 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
462 462  
463 463  
464 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
465 465  
466 -[[image:image-20220602171233-2.png||height="538" width="800"]]
383 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
467 467  
468 468  
386 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:.Instruction for LA66 Peer to Peer firmware.WebHome]]
469 469  
470 -(% style="color:blue" %)**2. Install Minicom in RPi.**
471 471  
472 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
473 473  
474 - (% style="background-color:yellow" %)**apt update**
390 += 3.  Order Info =
475 475  
476 - (% style="background-color:yellow" %)**apt install minicom**
477 477  
393 +**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
478 478  
479 -Use minicom to connect to the RPI's terminal
480 480  
481 -[[image:image-20220602153146-3.png||height="439" width="500"]]
396 +(% style="color:blue" %)**XXX**(%%): The default frequency band
482 482  
398 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
399 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
400 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
401 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
402 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
403 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
404 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
405 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
406 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
483 483  
484 484  
485 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
409 += 4.  Reference =
486 486  
487 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
488 488  
412 +* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
489 489  
490 -[[image:image-20220602154928-5.png||height="436" width="500"]]
491 491  
415 += 5.  FCC Statement =
492 492  
493 493  
494 -(% style="color:blue" %)**4. Send Uplink message**
418 +(% style="color:red" %)**FCC Caution:**
495 495  
496 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
420 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
497 497  
498 -example: AT+SENDB=01,02,8,05820802581ea0a5
422 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
499 499  
500 500  
501 -[[image:image-20220602160339-6.png||height="517" width="600"]]
425 +(% style="color:red" %)**IMPORTANT NOTE: **
502 502  
427 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
503 503  
429 +—Reorient or relocate the receiving antenna.
504 504  
505 -Check to see if TTN received the message
431 +—Increase the separation between the equipment and receiver.
506 506  
507 -[[image:image-20220602160627-7.png||height="369" width="800"]]
433 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
508 508  
435 +—Consult the dealer or an experienced radio/TV technician for help.
509 509  
510 510  
511 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
438 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
512 512  
513 -
514 -
515 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
516 -
517 -
518 -
519 -
520 -= 4.  Order Info =
521 -
522 -
523 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
524 -
525 -
526 -(% style="color:blue" %)**XXX**(%%): The default frequency band
527 -
528 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
529 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
530 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
531 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
532 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
533 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
534 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
535 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
536 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
537 -
538 -
539 -
540 -= 5.  Reference =
541 -
542 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
440 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0