Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 100.2 >
edited by Xiaoling
on 2022/07/19 11:34
To version < 166.1 >
edited by Edwin Chen
on 2022/11/09 15:19
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 LoRaWAN Shield User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -6,16 +6,15 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
10 += 1.  LA66 LoRaWAN Shield =
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 13  
13 +== 1.1  Overview ==
14 14  
15 15  
16 16  (((
17 -(((
18 -[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
17 +[[image:image-20220715000826-2.png||height="145" width="220"]]
19 19  )))
20 20  
21 21  (((
... ... @@ -23,13 +23,12 @@
23 23  )))
24 24  
25 25  (((
26 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
25 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
27 27  )))
28 -)))
29 29  
30 30  (((
31 31  (((
32 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
30 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
33 33  )))
34 34  )))
35 35  
... ... @@ -37,8 +37,10 @@
37 37  (((
38 38  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
39 39  )))
38 +)))
40 40  
41 41  (((
41 +(((
42 42  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
43 43  )))
44 44  )))
... ... @@ -51,13 +51,14 @@
51 51  
52 52  
53 53  
54 -
55 55  == 1.2  Features ==
56 56  
57 -* Support LoRaWAN v1.0.4 protocol
56 +
57 +* Arduino Shield base on LA66 LoRaWAN module
58 +* Support LoRaWAN v1.0.3 protocol
58 58  * Support peer-to-peer protocol
59 59  * TCXO crystal to ensure RF performance on low temperature
60 -* SMD Antenna pad and i-pex antenna connector
61 +* SMA connector
61 61  * Available in different frequency LoRaWAN frequency bands.
62 62  * World-wide unique OTAA keys.
63 63  * AT Command via UART-TTL interface
... ... @@ -65,9 +65,9 @@
65 65  * Ultra-long RF range
66 66  
67 67  
68 -
69 69  == 1.3  Specification ==
70 70  
71 +
71 71  * CPU: 32-bit 48 MHz
72 72  * Flash: 256KB
73 73  * RAM: 64KB
... ... @@ -87,455 +87,353 @@
87 87  * I/O Voltage: 3.3v
88 88  
89 89  
91 +== 1.4  Pin Mapping & LED ==
90 90  
91 -== 1.4  AT Command ==
92 92  
94 +[[image:image-20220817085048-1.png||height="533" width="734"]]
93 93  
94 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
95 95  
96 96  
98 +~1. The LED lights up red when there is an upstream data packet
99 +2. When the network is successfully connected, the green light will be on for 5 seconds
100 +3. Purple light on when receiving downlink data packets
97 97  
98 -== 1.5  Dimension ==
99 99  
100 -[[image:image-20220718094750-3.png]]
103 +[[image:image-20220820112305-1.png||height="515" width="749"]]
101 101  
102 102  
103 103  
107 +== 1.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
104 104  
105 -== 1.6  Pin Mapping ==
106 106  
110 +**Show connection diagram：**
107 107  
108 -[[image:image-20220719093156-1.png]]
109 109  
113 +[[image:image-20220723170210-2.png||height="908" width="681"]]
110 110  
111 111  
112 -== 1.7  Land Pattern ==
113 113  
114 -[[image:image-20220517072821-2.png]]
117 +(% style="color:blue" %)**1.  open Arduino IDE**
115 115  
116 116  
120 +[[image:image-20220723170545-4.png]]
117 117  
118 -= 2.  LA66 LoRaWAN Shield =
119 119  
120 120  
121 -== 2.1  Overview ==
124 +(% style="color:blue" %)**2.  Open project**
122 122  
123 123  
127 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
124 124  
125 -(((
126 -[[image:image-20220715000826-2.png||height="145" width="220"]]
127 -)))
129 +[[image:image-20220726135239-1.png]]
128 128  
129 -(((
130 -
131 -)))
132 132  
133 -(((
134 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
135 -)))
136 136  
137 -(((
138 -(((
139 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
140 -)))
141 -)))
133 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
142 142  
143 -(((
144 -(((
145 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
146 -)))
147 -)))
148 148  
149 -(((
150 -(((
151 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
152 -)))
153 -)))
136 +[[image:image-20220726135356-2.png]]
154 154  
155 -(((
156 -(((
157 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
158 -)))
159 -)))
160 160  
161 161  
140 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
162 162  
163 163  
164 -== 2.2  Features ==
143 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
165 165  
166 -* Arduino Shield base on LA66 LoRaWAN module
167 -* Support LoRaWAN v1.0.4 protocol
168 -* Support peer-to-peer protocol
169 -* TCXO crystal to ensure RF performance on low temperature
170 -* SMA connector
171 -* Available in different frequency LoRaWAN frequency bands.
172 -* World-wide unique OTAA keys.
173 -* AT Command via UART-TTL interface
174 -* Firmware upgradable via UART interface
175 -* Ultra-long RF range
176 176  
177 177  
147 +== 1.6  Example: Join TTN network and send an uplink message, get downlink message. ==
178 178  
179 179  
180 -== 2.3  Specification ==
150 +(% style="color:blue" %)**1.  Open project**
181 181  
182 -* CPU: 32-bit 48 MHz
183 -* Flash: 256KB
184 -* RAM: 64KB
185 -* Input Power Range: 1.8v ~~ 3.7v
186 -* Power Consumption: < 4uA.
187 -* Frequency Range: 150 MHz ~~ 960 MHz
188 -* Maximum Power +22 dBm constant RF output
189 -* High sensitivity: -148 dBm
190 -* Temperature:
191 -** Storage: -55 ~~ +125℃
192 -** Operating: -40 ~~ +85℃
193 -* Humidity:
194 -** Storage: 5 ~~ 95% (Non-Condensing)
195 -** Operating: 10 ~~ 95% (Non-Condensing)
196 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
197 -* LoRa Rx current: <9 mA
198 -* I/O Voltage: 3.3v
199 199  
153 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0 >>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
200 200  
201 201  
156 +[[image:image-20220723172502-8.png]]
202 202  
203 -== 2.4  Pin Mapping & LED ==
204 204  
205 205  
160 +(% style="color:blue" %)**2.  Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
206 206  
207 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
208 208  
163 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
209 209  
210 210  
211 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
212 212  
167 +== 1.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
213 213  
214 214  
215 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
170 +(% style="color:blue" %)**1.  Open project**
216 216  
217 217  
173 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0>>https://www.dropbox.com/sh/hgtycj0go4tka2r/AAACRRIRriMAudB2m3ThH7Sba?dl=0]]
218 218  
219 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
220 220  
176 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
221 221  
222 -=== 2.8.1  Items needed for update ===
223 223  
224 -1. LA66 LoRaWAN Shield
225 -1. Arduino
226 -1. USB TO TTL Adapter
227 227  
228 -[[image:image-20220602100052-2.png||height="385" width="600"]]
180 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
229 229  
230 230  
231 -=== 2.8.2  Connection ===
183 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
232 232  
233 233  
234 -[[image:image-20220602101311-3.png||height="276" width="600"]]
235 235  
236 236  
237 -(((
238 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
239 -)))
240 240  
241 -(((
242 -(% style="background-color:yellow" %)**GND  <-> GND
243 -TXD  <->  TXD
244 -RXD  <->  RXD**
245 -)))
189 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
246 246  
247 247  
248 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
192 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
249 249  
250 -Connect USB TTL Adapter to PC after connecting the wires
251 251  
195 +[[image:image-20220723175700-12.png||height="602" width="995"]]
252 252  
253 -[[image:image-20220602102240-4.png||height="304" width="600"]]
254 254  
255 255  
256 -=== 2.8.3  Upgrade steps ===
199 +== 1.8  Example: How to join helium ==
257 257  
258 258  
259 -==== 1.  Switch SW1 to put in ISP position ====
202 +(% style="color:blue" %)**1.  Create a new device.**
260 260  
261 261  
262 -[[image:image-20220602102824-5.png||height="306" width="600"]]
205 +[[image:image-20220907165500-1.png||height="464" width="940"]]
263 263  
264 264  
265 265  
266 -==== 2.  Press the RST switch once ====
209 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
267 267  
268 268  
269 -[[image:image-20220602104701-12.png||height="285" width="600"]]
212 +[[image:image-20220907165837-2.png||height="375" width="809"]]
270 270  
271 271  
272 272  
273 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
216 +(% style="color:blue" %)**3.  Use AT commands.**
274 274  
275 275  
276 -(((
277 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
278 -)))
219 +[[image:image-20220602100052-2.png||height="385" width="600"]]
279 279  
280 280  
281 -[[image:image-20220602103227-6.png]]
282 282  
223 +(% style="color:#0000ff" %)**4.  Use command AT+CFG to get device configuration**
283 283  
284 -[[image:image-20220602103357-7.png]]
285 285  
226 +[[image:image-20220907170308-3.png||height="556" width="617"]]
286 286  
287 287  
288 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
289 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
290 290  
230 +(% style="color:blue" %)**5.  Network successfully.**
291 291  
292 -[[image:image-20220602103844-8.png]]
293 293  
233 +[[image:image-20220907170436-4.png]]
294 294  
295 295  
296 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
297 -(% style="color:blue" %)**3. Select the bin file to burn**
298 298  
237 +(% style="color:blue" %)**6.  Send uplink using command**
299 299  
300 -[[image:image-20220602104144-9.png]]
301 301  
240 +[[image:image-20220912084334-1.png]]
302 302  
303 -[[image:image-20220602104251-10.png]]
304 304  
243 +[[image:image-20220912084412-3.png]]
305 305  
306 -[[image:image-20220602104402-11.png]]
307 307  
308 308  
247 +[[image:image-20220907170744-6.png||height="242" width="798"]]
309 309  
310 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
311 -(% style="color:blue" %)**4. Click to start the download**
312 312  
313 -[[image:image-20220602104923-13.png]]
314 314  
251 +== 1.9  Upgrade Firmware of LA66 LoRaWAN Shield ==
315 315  
316 316  
317 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
318 -(% style="color:blue" %)**5. Check update process**
254 +=== 1.9.1  Items needed for update ===
319 319  
320 320  
321 -[[image:image-20220602104948-14.png]]
257 +1. LA66 LoRaWAN Shield
258 +1. Arduino
259 +1. USB TO TTL Adapter
322 322  
261 +[[image:image-20220602100052-2.png||height="385" width="600"]]
323 323  
324 324  
325 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
326 -(% style="color:blue" %)**The following picture shows that the burning is successful**
327 327  
328 -[[image:image-20220602105251-15.png]]
265 +=== 1.9.2  Connection ===
329 329  
330 330  
268 +[[image:image-20220602101311-3.png||height="276" width="600"]]
331 331  
332 -= 3.  LA66 USB LoRaWAN Adapter =
333 333  
271 +(((
272 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
273 +)))
334 334  
335 -== 3.1  Overview ==
275 +(((
276 +(% style="background-color:yellow" %)**GND  <-> GND
277 +TXD  <->  TXD
278 +RXD  <->  RXD**
279 +)))
336 336  
337 -[[image:image-20220715001142-3.png||height="145" width="220"]]
338 338  
339 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
282 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
340 340  
341 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
284 +Connect USB TTL Adapter to PC after connecting the wires
342 342  
343 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
344 344  
345 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
287 +[[image:image-20220602102240-4.png||height="304" width="600"]]
346 346  
347 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
348 348  
349 349  
350 -== 3.2  Features ==
291 +=== 1.9.3  Upgrade steps ===
351 351  
352 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
353 -* Ultra-long RF range
354 -* Support LoRaWAN v1.0.4 protocol
355 -* Support peer-to-peer protocol
356 -* TCXO crystal to ensure RF performance on low temperature
357 -* Spring RF antenna
358 -* Available in different frequency LoRaWAN frequency bands.
359 -* World-wide unique OTAA keys.
360 -* AT Command via UART-TTL interface
361 -* Firmware upgradable via UART interface
362 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
363 363  
364 364  
295 +==== (% style="color:blue" %)**1.  Switch SW1 to put in ISP position**(%%) ====
365 365  
366 -== 3.3  Specification ==
367 367  
368 -* CPU: 32-bit 48 MHz
369 -* Flash: 256KB
370 -* RAM: 64KB
371 -* Input Power Range: 5v
372 -* Frequency Range: 150 MHz ~~ 960 MHz
373 -* Maximum Power +22 dBm constant RF output
374 -* High sensitivity: -148 dBm
375 -* Temperature:
376 -** Storage: -55 ~~ +125℃
377 -** Operating: -40 ~~ +85℃
378 -* Humidity:
379 -** Storage: 5 ~~ 95% (Non-Condensing)
380 -** Operating: 10 ~~ 95% (Non-Condensing)
381 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
382 -* LoRa Rx current: <9 mA
298 +[[image:image-20220602102824-5.png||height="306" width="600"]]
383 383  
384 384  
385 385  
386 -== 3.4  Pin Mapping & LED ==
387 387  
303 +==== (% style="color:blue" %)**2.  Press the RST switch once**(%%) ====
388 388  
389 389  
390 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
306 +[[image:image-20220817085447-1.png]]
391 391  
392 392  
393 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
394 394  
395 395  
396 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
311 +==== (% style="color:blue" %)**3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**(%%) ====
397 397  
398 398  
399 -[[image:image-20220602171217-1.png||height="538" width="800"]]
400 400  
315 +(((
316 +(% style="color:blue" %)**1.  Software download link:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
317 +)))
401 401  
402 -Open the serial port tool
403 403  
404 -[[image:image-20220602161617-8.png]]
320 +[[image:image-20220602103227-6.png]]
405 405  
406 -[[image:image-20220602161718-9.png||height="457" width="800"]]
407 407  
323 +[[image:image-20220602103357-7.png]]
408 408  
409 409  
410 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
411 411  
412 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
327 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
328 +(% style="color:blue" %)**2.  Select the COM port corresponding to USB TTL**
413 413  
414 414  
415 -[[image:image-20220602161935-10.png||height="498" width="800"]]
331 +[[image:image-20220602103844-8.png]]
416 416  
417 417  
418 418  
419 -(% style="color:blue" %)**3. See Uplink Command**
335 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
336 +(% style="color:blue" %)**3.  Select the bin file to burn**
420 420  
421 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
422 422  
423 -example: AT+SENDB=01,02,8,05820802581ea0a5
339 +[[image:image-20220602104144-9.png]]
424 424  
425 -[[image:image-20220602162157-11.png||height="497" width="800"]]
426 426  
342 +[[image:image-20220602104251-10.png]]
427 427  
428 428  
429 -(% style="color:blue" %)**4. Check to see if TTN received the message**
345 +[[image:image-20220602104402-11.png]]
430 430  
431 -[[image:image-20220602162331-12.png||height="420" width="800"]]
432 432  
433 433  
349 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
350 +(% style="color:blue" %)**4.  Click to start the download**
434 434  
435 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
436 436  
353 +[[image:image-20220602104923-13.png]]
437 437  
438 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
439 439  
440 440  
441 -(% style="color:red" %)**Preconditions:**
357 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
358 +(% style="color:blue" %)**5.  Check update process**
442 442  
443 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
444 444  
445 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
361 +[[image:image-20220602104948-14.png]]
446 446  
447 447  
448 448  
449 -(% style="color:blue" %)**Steps for usage:**
365 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
366 +(% style="color:blue" %)**The following picture shows that the burning is successful**
450 450  
451 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
452 452  
453 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
369 +[[image:image-20220602105251-15.png]]
454 454  
455 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
456 456  
457 457  
373 += 2.  FAQ =
458 458  
459 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
460 460  
376 +== 2.1  How to Compile Source Code for LA66? ==
461 461  
462 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
463 463  
379 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
464 464  
465 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
466 466  
467 -[[image:image-20220602171233-2.png||height="538" width="800"]]
468 468  
383 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
469 469  
470 470  
471 -(% style="color:blue" %)**2. Install Minicom in RPi.**
386 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:.Instruction for LA66 Peer to Peer firmware.WebHome]]
472 472  
473 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
474 474  
475 - (% style="background-color:yellow" %)**apt update**
476 476  
477 - (% style="background-color:yellow" %)**apt install minicom**
390 += 3.  Order Info =
478 478  
479 479  
480 -Use minicom to connect to the RPI's terminal
393 +**Part Number:**   (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%)
481 481  
482 -[[image:image-20220602153146-3.png||height="439" width="500"]]
483 483  
396 +(% style="color:blue" %)**XXX**(%%): The default frequency band
484 484  
398 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
399 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
400 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
401 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
402 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
403 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
404 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
405 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
406 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
485 485  
486 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
487 487  
488 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
409 += 4.  Reference =
489 489  
490 490  
491 -[[image:image-20220602154928-5.png||height="436" width="500"]]
412 +* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
492 492  
493 493  
415 += 5.  FCC Statement =
494 494  
495 -(% style="color:blue" %)**4. Send Uplink message**
496 496  
497 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
418 +(% style="color:red" %)**FCC Caution:**
498 498  
499 -example: AT+SENDB=01,02,8,05820802581ea0a5
420 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
500 500  
422 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
501 501  
502 -[[image:image-20220602160339-6.png||height="517" width="600"]]
503 503  
425 +(% style="color:red" %)**IMPORTANT NOTE: **
504 504  
427 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
505 505  
506 -Check to see if TTN received the message
429 +—Reorient or relocate the receiving antenna.
507 507  
508 -[[image:image-20220602160627-7.png||height="369" width="800"]]
431 +—Increase the separation between the equipment and receiver.
509 509  
433 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
510 510  
435 +—Consult the dealer or an experienced radio/TV technician for help.
511 511  
512 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
513 513  
438 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
514 514  
515 -
516 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
517 -
518 -
519 -
520 -
521 -= 4.  Order Info =
522 -
523 -
524 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
525 -
526 -
527 -(% style="color:blue" %)**XXX**(%%): The default frequency band
528 -
529 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
530 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
531 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
532 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
533 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
534 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
535 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
536 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
537 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
538 -
539 -= 5.  Reference =
540 -
541 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
440 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085048-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817085447-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +467.7 KB
Content
image-20220817085646-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +95.7 KB
Content
image-20220820112305-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +784.9 KB
Content
image-20220907165500-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +121.8 KB
Content
image-20220907165837-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +86.9 KB
Content
image-20220907170308-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +40.4 KB
Content
image-20220907170436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +22.6 KB
Content
image-20220907170659-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +27.8 KB
Content
image-20220907170744-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +44.5 KB
Content
image-20220912084334-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912084352-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content
image-20220912084412-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0