Last modified by Xiaoling on 2023/05/26 14:19
<
From version < 100.1 >
edited by Xiaoling
on 2022/07/19 09:34
To version < 70.1 >
edited by Edwin Chen
on 2022/07/02 23:51
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,41 +1,23 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 -
11 -
12 -== 1.1  What is LA66 LoRaWAN Module ==
13 -
14 -
15 -(((
16 -[[image:image-20220715000242-1.png||height="110" width="132"]]
17 -
18 18  (% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
19 -)))
20 20  
21 -(((
22 22  (% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
23 -)))
24 24  
25 -(((
26 26  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
27 -)))
28 28  
29 -(((
30 30  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
31 -)))
32 32  
33 -(((
34 34  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
35 -)))
36 36  
37 37  
38 -== 1.2  Features ==
20 +== Features ==
39 39  
40 40  * Support LoRaWAN v1.0.4 protocol
41 41  * Support peer-to-peer protocol
... ... @@ -49,7 +49,7 @@
49 49  
50 50  
51 51  
52 -== 1.3  Specification ==
34 +== Specification ==
53 53  
54 54  * CPU: 32-bit 48 MHz
55 55  * Flash: 256KB
... ... @@ -69,430 +69,221 @@
69 69  * LoRa Rx current: <9 mA
70 70  * I/O Voltage: 3.3v
71 71  
54 +== AT Command ==
72 72  
73 -
74 -
75 -== 1.4  AT Command ==
76 -
77 -
78 78  AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
79 79  
80 80  
59 +== Dimension ==
81 81  
82 -== 1.5  Dimension ==
61 +[[image:image-20220517072526-1.png]]
83 83  
84 -[[image:image-20220718094750-3.png]]
85 85  
64 +== Pin Mapping ==
86 86  
87 -
88 -
89 -== 1.6  Pin Mapping ==
90 -
91 -
92 92  [[image:image-20220523101537-1.png]]
93 93  
68 +== Land Pattern ==
94 94  
95 -
96 -== 1.7  Land Pattern ==
97 -
98 98  [[image:image-20220517072821-2.png]]
99 99  
100 100  
73 +== Part Number ==
101 101  
102 -= 2.  LA66 LoRaWAN Shield =
75 +Part Number: **LA66-XXX**
103 103  
77 +**XX**: The default frequency band
104 104  
105 -== 2.1  Overview ==
79 +* **AS923**: LoRaWAN AS923 band
80 +* **AU915**: LoRaWAN AU915 band
81 +* **EU433**: LoRaWAN EU433 band
82 +* **EU868**: LoRaWAN EU868 band
83 +* **KR920**: LoRaWAN KR920 band
84 +* **US915**: LoRaWAN US915 band
85 +* **IN865**: LoRaWAN IN865 band
86 +* **CN470**: LoRaWAN CN470 band
87 +* **PP**: Peer to Peer LoRa Protocol
106 106  
89 += LA66 LoRaWAN Shield =
107 107  
108 -[[image:image-20220715000826-2.png||height="386" width="449"]]
91 +LA66 LoRaWAN Shield is the Arduino Breakout PCB to fast test the features of LA66 module and turn Arduino to support LoRaWAN.
109 109  
93 +== Pin Mapping & LED ==
110 110  
111 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
95 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
112 112  
113 -(((
114 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
115 -)))
97 +== Example: Join TTN network and send an uplink message, get downlink message. ==
116 116  
117 -(((
118 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
119 -)))
99 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
120 120  
121 -(((
122 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
123 -)))
101 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
124 124  
125 -(((
126 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
127 -)))
103 +=== what needs to be used ===
128 128  
105 +1.LA66 LoRaWAN Shield that needs to be upgraded
129 129  
130 -== 2.2  Features ==
107 +2.Arduino
131 131  
132 -* Arduino Shield base on LA66 LoRaWAN module
133 -* Support LoRaWAN v1.0.4 protocol
134 -* Support peer-to-peer protocol
135 -* TCXO crystal to ensure RF performance on low temperature
136 -* SMA connector
137 -* Available in different frequency LoRaWAN frequency bands.
138 -* World-wide unique OTAA keys.
139 -* AT Command via UART-TTL interface
140 -* Firmware upgradable via UART interface
141 -* Ultra-long RF range
109 +3.USB TO TTL
142 142  
143 -== 2.3  Specification ==
111 +[[image:image-20220602100052-2.png]]
144 144  
145 -* CPU: 32-bit 48 MHz
146 -* Flash: 256KB
147 -* RAM: 64KB
148 -* Input Power Range: 1.8v ~~ 3.7v
149 -* Power Consumption: < 4uA.
150 -* Frequency Range: 150 MHz ~~ 960 MHz
151 -* Maximum Power +22 dBm constant RF output
152 -* High sensitivity: -148 dBm
153 -* Temperature:
154 -** Storage: -55 ~~ +125℃
155 -** Operating: -40 ~~ +85℃
156 -* Humidity:
157 -** Storage: 5 ~~ 95% (Non-Condensing)
158 -** Operating: 10 ~~ 95% (Non-Condensing)
159 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
160 -* LoRa Rx current: <9 mA
161 -* I/O Voltage: 3.3v
113 +=== Wiring Schematic ===
162 162  
163 -== 2.4  Pin Mapping & LED ==
115 +[[image:image-20220602101311-3.png]]
164 164  
117 +LA66 LoRaWAN Shield  >>>>>>>>>>>>USB TTL
165 165  
119 +GND  >>>>>>>>>>>>GND
166 166  
167 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
121 +TXD  >>>>>>>>>>>>TXD
168 168  
123 +RXD  >>>>>>>>>>>>RXD
169 169  
125 +JP6 of LA66 LoRaWAN Shield needs to be connected with yellow jumper cap
170 170  
171 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
127 +Connect to the PC after connecting the wires
172 172  
129 +[[image:image-20220602102240-4.png]]
173 173  
131 +=== Upgrade steps ===
174 174  
175 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
133 +==== Dial the SW1 of the LA66 LoRaWAN Shield to the ISP's location as shown in the figure below ====
176 176  
135 +[[image:image-20220602102824-5.png]]
177 177  
137 +==== Press the RST switch on the LA66 LoRaWAN Shield once ====
178 178  
179 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
139 +[[image:image-20220602104701-12.png]]
180 180  
141 +==== Open the upgrade application software ====
181 181  
182 -=== 2.8.1  Items needed for update ===
143 +Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
183 183  
184 -1. LA66 LoRaWAN Shield
185 -1. Arduino
186 -1. USB TO TTL Adapter
187 -
188 -[[image:image-20220602100052-2.png||height="385" width="600"]]
189 -
190 -
191 -=== 2.8.2  Connection ===
192 -
193 -
194 -[[image:image-20220602101311-3.png||height="276" width="600"]]
195 -
196 -
197 -(((
198 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
199 -)))
200 -
201 -(((
202 -(% style="background-color:yellow" %)**GND  <-> GND
203 -TXD  <->  TXD
204 -RXD  <->  RXD**
205 -)))
206 -
207 -
208 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
209 -
210 -Connect USB TTL Adapter to PC after connecting the wires
211 -
212 -
213 -[[image:image-20220602102240-4.png||height="304" width="600"]]
214 -
215 -
216 -=== 2.8.3  Upgrade steps ===
217 -
218 -
219 -==== 1.  Switch SW1 to put in ISP position ====
220 -
221 -
222 -[[image:image-20220602102824-5.png||height="306" width="600"]]
223 -
224 -
225 -
226 -==== 2.  Press the RST switch once ====
227 -
228 -
229 -[[image:image-20220602104701-12.png||height="285" width="600"]]
230 -
231 -
232 -
233 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
234 -
235 -
236 -(((
237 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
238 -)))
239 -
240 -
241 241  [[image:image-20220602103227-6.png]]
242 242  
243 -
244 244  [[image:image-20220602103357-7.png]]
245 245  
149 +===== Select the COM port corresponding to USB TTL =====
246 246  
247 -
248 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
249 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
250 -
251 -
252 252  [[image:image-20220602103844-8.png]]
253 253  
153 +===== Select the bin file to burn =====
254 254  
255 -
256 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
257 -(% style="color:blue" %)**3. Select the bin file to burn**
258 -
259 -
260 260  [[image:image-20220602104144-9.png]]
261 261  
262 -
263 263  [[image:image-20220602104251-10.png]]
264 264  
265 -
266 266  [[image:image-20220602104402-11.png]]
267 267  
161 +===== Click to start the download =====
268 268  
269 -
270 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
271 -(% style="color:blue" %)**4. Click to start the download**
272 -
273 273  [[image:image-20220602104923-13.png]]
274 274  
165 +===== The following figure appears to prove that the burning is in progress =====
275 275  
276 -
277 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
278 -(% style="color:blue" %)**5. Check update process**
279 -
280 -
281 281  [[image:image-20220602104948-14.png]]
282 282  
169 +===== The following picture appears to prove that the burning is successful =====
283 283  
284 -
285 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
286 -(% style="color:blue" %)**The following picture shows that the burning is successful**
287 -
288 288  [[image:image-20220602105251-15.png]]
289 289  
173 += LA66 USB LoRaWAN Adapter =
290 290  
175 +LA66 USB LoRaWAN Adapter is the USB Adapter for LA66, it combines a USB TTL Chip and LA66 module which can easy to test the LoRaWAN feature by using PC or embedded device which has USB Interface.
291 291  
292 -= 3.  LA66 USB LoRaWAN Adapter =
177 +Before use, please make sure that the computer has installed the CP2102 driver
293 293  
179 +== Pin Mapping & LED ==
294 294  
295 -== 3.1  Overview ==
181 +== Example Send & Get Messages via LoRaWAN in PC ==
296 296  
297 -[[image:image-20220715001142-3.png||height="145" width="220"]]
183 +Connect the LA66 LoRa Shield to the PC
298 298  
299 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
185 +[[image:image-20220602171217-1.png||height="615" width="915"]]
300 300  
301 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
302 -
303 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
304 -
305 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
306 -
307 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
308 -
309 -
310 -== 3.2  Features ==
311 -
312 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
313 -* Ultra-long RF range
314 -* Support LoRaWAN v1.0.4 protocol
315 -* Support peer-to-peer protocol
316 -* TCXO crystal to ensure RF performance on low temperature
317 -* Spring RF antenna
318 -* Available in different frequency LoRaWAN frequency bands.
319 -* World-wide unique OTAA keys.
320 -* AT Command via UART-TTL interface
321 -* Firmware upgradable via UART interface
322 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
323 -
324 -== 3.3  Specification ==
325 -
326 -* CPU: 32-bit 48 MHz
327 -* Flash: 256KB
328 -* RAM: 64KB
329 -* Input Power Range: 5v
330 -* Frequency Range: 150 MHz ~~ 960 MHz
331 -* Maximum Power +22 dBm constant RF output
332 -* High sensitivity: -148 dBm
333 -* Temperature:
334 -** Storage: -55 ~~ +125℃
335 -** Operating: -40 ~~ +85℃
336 -* Humidity:
337 -** Storage: 5 ~~ 95% (Non-Condensing)
338 -** Operating: 10 ~~ 95% (Non-Condensing)
339 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
340 -* LoRa Rx current: <9 mA
341 -
342 -== 3.4  Pin Mapping & LED ==
343 -
344 -
345 -
346 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
347 -
348 -
349 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
350 -
351 -
352 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
353 -
354 -
355 -[[image:image-20220602171217-1.png||height="538" width="800"]]
356 -
357 -
358 358  Open the serial port tool
359 359  
360 360  [[image:image-20220602161617-8.png]]
361 361  
362 -[[image:image-20220602161718-9.png||height="457" width="800"]]
191 +[[image:image-20220602161718-9.png||height="529" width="927"]]
363 363  
193 +Press the reset switch RST on the LA66 LoRa Shield.
364 364  
195 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
365 365  
366 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
197 +[[image:image-20220602161935-10.png]]
367 367  
368 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
199 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
369 369  
370 -
371 -[[image:image-20220602161935-10.png||height="498" width="800"]]
372 -
373 -
374 -
375 -(% style="color:blue" %)**3. See Uplink Command**
376 -
377 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
378 -
379 379  example: AT+SENDB=01,02,8,05820802581ea0a5
380 380  
381 -[[image:image-20220602162157-11.png||height="497" width="800"]]
203 +[[image:image-20220602162157-11.png]]
382 382  
205 +Check to see if TTN received the message
383 383  
207 +[[image:image-20220602162331-12.png||height="547" width="1044"]]
384 384  
385 -(% style="color:blue" %)**4. Check to see if TTN received the message**
209 +== Example Send & Get Messages via LoRaWAN in RPi ==
386 386  
387 -[[image:image-20220602162331-12.png||height="420" width="800"]]
211 +Connect the LA66 LoRa Shield to the RPI
388 388  
213 +[[image:image-20220602171233-2.png||height="592" width="881"]]
389 389  
215 +Log in to the RPI's terminal and connect to the serial port
390 390  
391 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
217 +[[image:image-20220602153146-3.png]]
392 392  
219 +Press the reset switch RST on the LA66 LoRa Shield.
220 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
393 393  
394 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
222 +[[image:image-20220602154928-5.png]]
395 395  
224 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
396 396  
397 -(% style="color:red" %)**Preconditions:**
398 -
399 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
400 -
401 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
402 -
403 -
404 -
405 -(% style="color:blue" %)**Steps for usage:**
406 -
407 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
408 -
409 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
410 -
411 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
412 -
413 -
414 -
415 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
416 -
417 -
418 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
419 -
420 -
421 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
422 -
423 -[[image:image-20220602171233-2.png||height="538" width="800"]]
424 -
425 -
426 -
427 -(% style="color:blue" %)**2. Install Minicom in RPi.**
428 -
429 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
430 -
431 - (% style="background-color:yellow" %)**apt update**
432 -
433 - (% style="background-color:yellow" %)**apt install minicom**
434 -
435 -
436 -Use minicom to connect to the RPI's terminal
437 -
438 -[[image:image-20220602153146-3.png||height="439" width="500"]]
439 -
440 -
441 -
442 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
443 -
444 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
445 -
446 -
447 -[[image:image-20220602154928-5.png||height="436" width="500"]]
448 -
449 -
450 -
451 -(% style="color:blue" %)**4. Send Uplink message**
452 -
453 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
454 -
455 455  example: AT+SENDB=01,02,8,05820802581ea0a5
456 456  
228 +[[image:image-20220602160339-6.png]]
457 457  
458 -[[image:image-20220602160339-6.png||height="517" width="600"]]
230 +Check to see if TTN received the message
459 459  
232 +[[image:image-20220602160627-7.png||height="468" width="1013"]]
460 460  
234 +=== Install Minicom ===
461 461  
462 -Check to see if TTN received the message
236 +Enter the following command in the RPI terminal
463 463  
464 -[[image:image-20220602160627-7.png||height="369" width="800"]]
238 +apt update
465 465  
240 +[[image:image-20220602143155-1.png]]
466 466  
242 +apt install minicom
467 467  
468 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
244 +[[image:image-20220602143744-2.png]]
469 469  
246 +=== Send PC's CPU/RAM usage to TTN via script. ===
470 470  
248 +==== Take python as an example： ====
471 471  
472 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
250 +===== Preconditions: =====
473 473  
252 +1.LA66 USB LoRaWAN Adapter works fine
474 474  
254 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
475 475  
256 +===== Steps for usage =====
476 476  
477 -= 4.  Order Info =
258 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
478 478  
260 +2.Run the script and see the TTN
479 479  
480 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
262 +[[image:image-20220602115852-3.png]]
481 481  
482 482  
483 -(% style="color:blue" %)**XXX**(%%): The default frequency band
484 484  
485 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
486 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
487 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
488 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
489 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
490 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
491 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
492 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
493 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
266 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
494 494  
495 -= 5.  Reference =
496 496  
497 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
269 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
498 498  
271 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0