WSC1-L-Dragino LoRaWAN Weather Station User Manual

Dragino LoRaWAN weather station series products are designed for measuring atmospheric conditions to provide information for weather forecasts and to study the (% style="color:#4472c4" %)**weather and climate**(%%). They consist of a (% style="color:#4472c4" %)**main process device (WSC1-L) and various sensors**.

25

)))

26

27

(((

28

The sensors include various type such as: (% style="color:#4472c4" %)**Rain Gauge**, **Temperature/Humidity/Pressure sensor**, **Wind Speed/direction sensor**, **Illumination sensor**, **CO2 sensor**, **Rain/Snow sensor**,** PM2.5/10 sensor**, **PAR(Photosynthetically Available Radiation) sensor, Total Solar Radiation sensor**(%%) and so on.

)))

(((

Main process device WSC1-L is an outdoor LoRaWAN RS485 end node. It is powered by external (% style="color:#4472c4" %)**12v solar power**(%%) and have a (% style="color:#4472c4" %)**built-in li-on backup battery**(%%). WSC1-L reads value from various sensors and upload these sensor data to IoT server via LoRaWAN wireless protocol.

)))

(((

WSC1-L is full compatible with(% style="color:#4472c4" %)** LoRaWAN Class C protocol**(%%), it can work with standard LoRaWAN gateway.

)))

= 2. How to use =

== 2.1 Installation ==

44

45

Below is an installation example for the weather station. Field installation example can be found at [[Appendix I: Field Installation Photo.>>||anchor="H11.AppendixI:FieldInstallationPhoto"]]

46

47

[[image:1656041948552-849.png]]

48

49

50

(% style="color:blue" %)** Wiring:**

51

52

~1. WSC1-L and sensors all powered by solar power via MPPT

53

54

2. WSC1-L and sensors connect to each other via RS485/Modbus.

55

56

3. WSC1-L read value from each sensor and send uplink via LoRaWAN

57

58

59

WSC1-L is shipped with a RS485 converter board, for the easy connection to different sensors and WSC1-L. Below is a connection photo:

60

61

[[image:1656042136605-251.png]]

62

63

64

(% style="color:red" %)**Notice 1:**

65

66

* All weather sensors and WSC1-L are powered by MPPT solar recharge controller. MPPT is connected to solar panel and storage battery.

67

* WSC1-L has an extra 1000mAh back up battery. So it can work even solar panel and storage battery Fails.

68

* Weather sensors won’t work if solar panel and storage battery fails.

69

70

(% style="color:red" %)**Notice 2:**

71

72

Due to shipment and importation limitation, user is better to purchase below parts locally:

* Solar Panel

* Storage Battery

* MPPT Solar Recharger

77

* Mounting Kit includes pole and mast assembly. Each weather sensor has it’s own mounting assembly, user can check the sensor section in this manual.

* Cabinet.

== 2.2 How it works? ==

84

85

(((

86

Each WSC1-L is shipped with a worldwide unique set of OTAA keys. To use WSC1-L in a LoRaWAN network, user needs to input the OTAA keys in LoRaWAN network server. After finish installation as above. Create WSC1-L in your LoRaWAN server and Power on WSC1-L , it can join the LoRaWAN network and start to transmit sensor data. The default period for each uplink is 20 minutes.

)))

(((

Open WSC1-L and put the yellow jumper as below position to power on WSC1-L.

92

)))

93

94

[[image:1656042192857-709.png]]

95

96

97

(% style="color:red" %)**Notice:**

98

99

1. WSC1-L will auto scan available weather sensors when power on or reboot.

100

1. User can send a downlink command to WSC1-L to do a re-scan on the available sensors.

== 2.3 Example to use for LoRaWAN network ==

106

107

This section shows an example for how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.

108

109

110

[[image:1656042612899-422.png]]

Assume the DLOS8 is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. We need to add the WSC1-L device in TTN V3:

115

116

117

(% style="color:blue" %)**Step 1**(%%): Create a device in TTN V3 with the OTAA keys from WSC1-L.

118

119

Each WSC1-L is shipped with a sticker with the default device EUI as below:

120

121

[[image:image-20220624115043-1.jpeg]]

122

123

124

User can enter these keys in the LoRaWAN Server portal. Below is TTN V3 screen shot:

125

126

**Add APP EUI in the application.**

127

128

[[image:1656042662694-311.png]]

129

130

[[image:1656042673910-429.png]]

**Choose Manually to add WSC1-L**

136

137

[[image:1656042695755-103.png]]

**Add APP KEY and DEV EUI**

142

143

[[image:1656042723199-746.png]]

(((

(% style="color:blue" %)**Step 2**(%%): Power on WSC1-L, it will start to join TTN server. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.

)))

[[image:1656042745346-283.png]]

== 2.4 Uplink Payload ==

157

158

Uplink payloads include two types: Valid Sensor Value and other status / control command.

159

160

* Valid Sensor Value: Use FPORT=2

161

* Other control command: Use FPORT other than 2.

=== 2.4.1 Uplink FPORT~=5, Device Status ===

167

168

Uplink the device configures with FPORT=5. Once WSC1-L Joined the network, it will uplink this message to the server. After first uplink, WSC1-L will uplink Device Status every 12 hours

(((

User can also use downlink command(0x2301) to ask WSC1-L to resend this uplink

173

)))

174

175

(% border="1" cellspacing="8" style="background-color:#ffffcc; color:green; width:500px" %)

176

177

|(% style="width:99px" %)**Value**|(% style="width:112px" %)[[Sensor Model>>||anchor="HSensorModel:"]]|(% style="width:135px" %)[[Firmware Version>>||anchor="HFirmwareVersion:"]]|(% style="width:126px" %)[[Frequency Band>>||anchor="HFrequencyBand:"]]|(% style="width:85px" %)[[Sub-band>>||anchor="HSub-Band:"]]|(% style="width:46px" %)[[BAT>>||anchor="HBAT:"]]|(% style="width:166px" %)[[Weather Sensor Types>>||anchor="HWeatherSensorTypes:"]]

178

179

[[image:1656043061044-343.png]]

180

181

182

Example Payload (FPort=5): [[image:image-20220624101005-1.png]]

==== (% style="color:#037691" %)**Sensor Model:**(%%) ====

187

188

For WSC1-L, this value is 0x0D.

==== (% style="color:#037691" %)**Firmware Version:**(%%) ====

193

194

0x0100, Means: v1.0.0 version.

==== (% style="color:#037691" %)**Frequency Band:**(%%) ====

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0x0a: AS923-3

==== (% style="color:#037691" %)**Sub-Band:**(%%) ====

223

224

value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)

==== (% style="color:#037691" %)**BAT:**(%%) ====

229

230

(((

231

shows the battery voltage for WSC1-L MCU.

)))

(((

Ex1: 0x0BD6/1000 = 3.03 V

)))

==== (% style="color:#037691" %)**Weather Sensor Types:**(%%) ====

241

242

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:100px" %)

243

|Byte3|Byte2|Byte1

244

245

Bit = 1 means this sensor is connected, Bit=0 means this sensor is not connected

246

247

[[image:image-20220624134713-1.png]]

248

249

250

Eg: 0x1000FE = 1 0000 0000 0000 1111 1110(b)

251

252

External sensors detected by WSC1-L include :

custom sensor A1,

PAR sensor (WSS-07),

Total Solar Radiation sensor (WSS-06),

259

260

CO2/PM2.5/PM10 (WSS-03),

261

262

Wind Speed/Direction (WSS-02)

263

264

265

User can also use downlink command(0x26 01) to ask WSC1-L to resend this uplink :

266

267

(% style="color:#037691" %)**Downlink:0x26 01**

268

269

[[image:1656049673488-415.png]]

=== 2.4.2 Uplink FPORT~=2, Real time sensor value ===

274

275

(((

276

WSC1-L will send this uplink after Device Config uplink once join LoRaWAN network successfully. And it will periodically send this uplink. Default interval is 20 minutes and [[can be changed>>||anchor="H3.1SetTransmitIntervalTime"]].

)))

(((

Uplink uses FPORT=2 and every 20 minutes send one uplink by default.

)))

(((

The upload length is dynamic, depends on what type of weather sensors are connected. The uplink payload is combined with sensor segments. As below:

)))

(% style="color:#4472c4" %)** Uplink Payload**:

290

291

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:464px" %)

292

|(% style="width:140px" %)Sensor Segment 1|(% style="width:139px" %)Sensor Segment 2|(% style="width:42px" %)……|(% style="width:140px" %)Sensor Segment n

293

294

(% style="color:#4472c4" %)** Sensor Segment Define**:

295

296

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:330px" %)

297

|(% style="width:89px" %)Type Code|(% style="width:114px" %)Length (Bytes)|(% style="width:124px" %)Measured Value

298

299

(% style="color:#4472c4" %)**Sensor Type Table:**

300

301

[[image:image-20220706154434-1.png]]

(((

Below is an example payload: [[image:image-20220624140615-3.png]]

)))

(((

)))

(((

When sending this payload to LoRaWAN server. WSC1-L will send this in one uplink or several uplinks according to LoRaWAN spec requirement. For example, total length of Payload is 54 bytes.

)))

* (((

When WSC1-L sending in US915 frequency DR0 data rate. Because this data rate has limitation of 11 bytes payload for each uplink. The payload will be split into below packets and uplink.

)))

(((

Uplink 1: [[image:image-20220624140735-4.png]]

)))

(((

)))

(((

Uplink 2: [[image:image-20220624140842-5.png]]

)))

(((

)))

* (((

When WSC1-L sending in EU868 frequency DR0 data rate. The payload will be split into below packets and uplink:

)))

(((

Uplink 1: [[image:image-20220624141025-6.png]]

)))

(((

)))

Uplink 2: [[image:image-20220624141100-7.png]]

=== 2.4.3 Decoder in TTN V3 ===

353

354

(((

355

In LoRaWAN platform, user only see HEX payload by default, user needs to use payload formatters to decode the payload to see human-readable value.

)))

(((

)))

(((

Download decoder for suitable platform from:

)))

(((

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/WSC1-L/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/WSC1-L/]]

)))

(((

and put as below:

)))

[[image:1656051152438-578.png]]

== 2.5 Show data on Application Server ==

379

380

(((

381

Application platform provides a human friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:

)))

(((

)))

(((

(% style="color:blue" %)**Step 1**(%%): Be sure that your device is programmed and properly connected to the LoRaWAN network.

)))

(((

(% style="color:blue" %)**Step 2**(%%): Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.

394

)))

395

396

[[image:1656051197172-131.png]]

**Add TagoIO:**

[[image:1656051223585-631.png]]

**Authorization:**

[[image:1656051248318-368.png]]

407

408

409

In TagoIO console ([[https:~~/~~/admin.tago.io~~/~~/>>url:https://datacake.co/]]) , add WSC1-L:

410

411

[[image:1656051277767-168.png]]

= 3. Configure WSC1-L via AT Command or LoRaWAN Downlink =

416

417

Use can configure WSC1-L via AT Command or LoRaWAN Downlink.

418

419

* AT Command Connection: See [[FAQ>>||anchor="H7.FAQ"]].

420

* LoRaWAN Downlink instruction for different platforms: [[Use Note for Server>>doc:Main.WebHome]](IoT LoRaWAN Server)

421

422

There are two kinds of commands to configure WSC1-L, they are:

423

424

* (% style="color:#4472c4" %)**General Commands**.

425

426

These commands are to configure:

427

428

* General system settings like: uplink interval.

429

* LoRaWAN protocol & radio related command.

430

431

They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack((% style="color:red" %)Note~*~*)(%%). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]

432

433

(% style="color:red" %)Note~*~*: Please check early user manual if you don’t have v1.8.0 firmware.

434

435

436

* (% style="color:#4472c4" %)**Commands special design for WSC1-L**

437

438

These commands only valid for WSC1-L, as below:

== 3.1 Set Transmit Interval Time ==

443

444

Feature: Change LoRaWAN End Node Transmit Interval.

445

446

(% style="color:#037691" %)**AT Command: AT+TDC**

447

448

[[image:image-20220624142619-8.png]]

449

450

451

(% style="color:#037691" %)**Downlink Command: 0x01**

452

453

Format: Command Code (0x01) followed by 3 bytes time value.

454

455

If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.

456

457

* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds

458

* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds

== 3.2 Set Emergency Mode ==

463

464

Feature: In emergency mode, WSC1-L will uplink data every 1 minute.

465

466

(% style="color:#037691" %)**AT Command:**

467

468

[[image:image-20220624142956-9.png]]

469

470

471

(% style="color:#037691" %)**Downlink Command:**

472

473

* 0xE101 Same as: AT+ALARMMOD=1

474

* 0xE100 Same as: AT+ALARMMOD=0

== 3.3 Add or Delete RS485 Sensor ==

479

480

(((

481

Feature: User can add or delete 3^^rd^^ party sensor as long they are RS485/Modbus interface,baud rate support 9600.Maximum can add 4 sensors.

)))

(((

(% style="color:#037691" %)**AT Command: **

)))

(((

(% style="color:blue" %)**AT+DYSENSOR=Type_Code, Query_Length, Query_Command , Read_Length , Valid_Data ,has_CRC,timeout**

)))

* (((

Type_Code range: A1 ~~ A4

494

)))

495

* (((

496

Query_Length: RS485 Query frame length, Value cannot be greater than 10

497

)))

498

* (((

499

Query_Command: RS485 Query frame data to be sent to sensor, cannot be larger than 10 bytes

500

)))

501

* (((

502

Read_Length: RS485 response frame length supposed to receive. Max can receive

503

)))

504

* (((

505

Valid_Data: valid data from RS485 Response, Valid Data will be added to Payload and upload via LoRaWAN.

506

)))

507

* (((

508

has_CRC: RS485 Response crc check (0: no verification required 1: verification required). If CRC=1 and CRC error, valid data will be set to 0.

509

)))

510

* (((

511

timeout: RS485 receive timeout (uint:ms). Device will close receive window after timeout

)))

(((

**Example:**

)))

(((

User need to change external sensor use the type code as address code.

)))

(((

With a 485 sensor, after correctly changing the address code to A1, the RS485 query frame is shown in the following table:

524

)))

525

526

[[image:image-20220624143553-10.png]]

527

528

529

The response frame of the sensor is as follows:

530

531

[[image:image-20220624143618-11.png]]

**Then the following parameters should be:**

536

537

* Address_Code range: A1

538

* Query_Length: 8

539

* Query_Command: A103000000019CAA

540

* Read_Length: 8

541

* Valid_Data: 24 (Indicates that the data length is 2 bytes, starting from the 4th byte)

542

* has_CRC: 1

543

* timeout: 1500 (Fill in the test according to the actual situation)

544

545

**So the input command is:**

546

547

AT+DYSENSOR=A1,8,A103000000019CAA,8,24,1,1500

548

549

550

In every sampling. WSC1-L will auto append the sensor segment as per this structure and uplink.

551

552

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:351px" %)

553

|=(% style="width: 94px;" %)Type Code|=(% style="width: 121px;" %)Length (Bytes)|=(% style="width: 132px;" %)Measured Value

554

|(% style="width:94px" %)A1|(% style="width:121px" %)2|(% style="width:132px" %)0x000A

555

556

**Related commands:**

557

558

AT+DYSENSOR=A1,0 ~-~-> Delete 3^^rd^^ party sensor A1.

559

560

AT+DYSENSOR ~-~-> List All 3^^rd^^ Party Sensor. Like below:

561

562

563

(% style="color:#037691" %)**Downlink Command: **

564

565

**delete custom sensor A1:**

566

567

* 0xE5A1 Same as: AT+DYSENSOR=A1,0

568

569

**Remove all custom sensors**

* 0xE5FF

== 3.4 RS485 Test Command ==

576

577

(% style="color:#037691" %)**AT Command:**

578

579

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:474px" %)

580

|=(% style="width: 159px;" %)**Command Example**|=(% style="width: 227px;" %)**Function**|=(% style="width: 85px;" %)**Response**

581

|(% style="width:159px" %)AT+RSWRITE=xxxxxx|(% style="width:227px" %)(((

582

(((

583

Send command to 485 sensor

)))

(((

Range : no more than 10 bytes

588

)))

589

)))|(% style="width:85px" %)OK

590

591

Eg: Send command **01 03 00 00 00 01 84 0A** to 485 sensor

592

593

AT+RSWRITE=0103000001840A

594

595

596

(% style="color:#037691" %)**Downlink Command:**

597

598

* 0xE20103000001840A Same as: AT+RSWRITE=0103000001840A

== 3.5 RS485 response timeout ==

603

604

Feature: Set or get extended time to receive 485 sensor data.

605

606

(% style="color:#037691" %)**AT Command:**

607

608

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:433px" %)

609

|=(% style="width: 157px;" %)**Command Example**|=(% style="width: 188px;" %)**Function**|=(% style="width: 85px;" %)**Response**

610

|(% style="width:157px" %)AT+DTR=1000|(% style="width:188px" %)(((

611

(((

612

Set response timeout to:

)))

(((

Range : 0~~10000

)))

)))|(% style="width:85px" %)OK

619

620

(% style="color:#037691" %)**Downlink Command:**

621

622

Format: Command Code (0xE0) followed by 3 bytes time value.

623

624

If the downlink payload=E0000005, it means set the END Node’s Transmit Interval to 0x000005=5(S), while type code is E0.

625

626

* Example 1: Downlink Payload: E0000005 ~/~/ Set Transmit Interval (DTR) = 5 seconds

627

* Example 2: Downlink Payload: E000000A ~/~/ Set Transmit Interval (DTR) = 10 seconds

== 3.6 Set Sensor Type ==

632

633

(((

634

Feature: Set sensor in used. If there are 6 sensors, user can set to only send 5 sensors values.

)))

(((

See [[definition>>||anchor="HWeatherSensorTypes:"]] for the sensor type.

639

)))

640

641

[[image:image-20220624144904-12.png]]

642

643

644

(% style="color:#037691" %)**AT Command:**

645

646

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:377px" %)

647

|=(% style="width: 157px;" %)**Command Example**|=(% style="width: 130px;" %)**Function**|=(% style="width: 87px;" %)**Response**

648

|(% style="width:157px" %)AT+STYPE=80221|(% style="width:130px" %)Set sensor types|(% style="width:87px" %)OK

649

650

Eg: The setting command **AT+STYPE=802212** means:

651

652

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:495px" %)

So wsc1-L will upload the following data: Custom Sensor A1, Rain Gauge,CO2,BAT.

661

662

663

(% style="color:#037691" %)**Downlink Command:**

664

665

* 0xE400802212 Same as: AT+STYPE=80221

666

667

(% style="color:red" %)**Note:**

668

669

~1. The sensor type will not be saved to flash, and the value will be updated every time the sensor is restarted or rescanned.

= 4. Power consumption and battery =

674

675

== 4.1 Total Power Consumption ==

676

677

Dragino Weather Station serial products include the main process unit ( WSC1-L ) and various sensors. The total power consumption equal total power of all above units. The power consumption for main process unit WSC1-L is 18ma @ 12v. and the power consumption of each sensor can be found on the Sensors chapter.

678

679

680

== 4.2 Reduce power consumption ==

681

682

The main process unit WSC1-L is set to LoRaWAN Class C by default. If user want to reduce the power consumption of this unit, user can set it to run in Class A. In Class A mode, WSC1-L will not be to get real-time downlink command from IoT Server.

== 4.3 Battery ==

(((

All sensors are only power by external power source. If external power source is off. All sensor won't work.

)))

(((

Main Process Unit WSC1-L is powered by both external power source and internal 1000mAh rechargeable battery. If external power source is off, WSC1-L still runs and can send periodically uplinks, but the sensors value will become invalid. External power source can recharge the 1000mAh rechargeable battery.

)))

= 5. Main Process Unit WSC1-L =

== 5.1 Features ==

* Wall Attachable.

* LoRaWAN v1.0.3 Class A protocol.

702

* RS485 / Modbus protocol

703

* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915

704

* AT Commands to change parameters

705

* Remote configure parameters via LoRaWAN Downlink

706

* Firmware upgradable via program port

707

* Powered by external 12v battery

708

* Back up rechargeable 1000mAh battery

709

* IP Rating: IP65

710

* Support default sensors or 3rd party RS485 sensors

== 5.2 Power Consumption ==

715

716

WSC1-L (without external sensor): Idle: 4mA, Transmit: max 40mA

717

718

719

== 5.3 Storage & Operation Temperature ==

-20°C to +60°C

== 5.4 Pin Mapping ==

725

726

[[image:1656054149793-239.png]]

== 5.5 Mechanical ==

Refer LSn50v2 enclosure drawing in: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Mechanical_Drawing/>>url:https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Mechanical_Drawing/]]

732

733

734

== 5.6 Connect to RS485 Sensors ==

735

736

WSC1-L includes a RS485 converter PCB. Which help it easy to connect multiply RS485 sensors. Below is the photo for reference.

737

738

739

[[image:1656054389031-379.png]]

740

741

742

Hardware Design for the Converter Board please see:

743

744

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/RS485_Converter_Board/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/RS485_Converter_Board/]]

745

746

747

= 6. Weather Sensors =

748

749

== 6.1 Rain Gauge ~-~- WSS-01 ==

(((

WSS-01 RS485 Rain Gauge is used in meteorology and hydrology to gather and measure the amount of liquid precipitation (mainly rainfall) over an area.

)))

(((

WSS-01 uses a tipping bucket to detect rainfall. The tipping bucket use 3D streamline shape to make sure it works smoothly and is easy to clean.

)))

(((

WSS-01 is designed to support the Dragino Weather station solution. Users only need to connect WSS-01 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload the rainfall to the IoT Server via wireless LoRaWAN protocol

)))

(((

The tipping bucket of WSS-01 is adjusted to the best angle. When installation, user only needs to screw up and adjust the bottom horizontally.

)))

(((

WSS-01 package includes screw which can be installed to ground. If user want to install WSS-01 on pole, they can purchase WS-K2 bracket kit.

)))

=== 6.1.1 Feature ===

774

775

* RS485 Rain Gauge

776

* Small dimension, easy to install

777

* Vents under funnel, avoid leaf or other things to avoid rain flow.

778

* ABS enclosure.

779

* Horizontal adjustable.

=== 6.1.2 Specification ===

* Resolution: 0.2mm

* Accuracy: ±3%

* Rainfall strength: 0mm～4mm/min (max 8mm/min)

788

* Input Power: DC 5~~24v

789

* Interface: RS485

790

* Working Temperature: 0℃～70℃ ( incorrect below 0 degree, because water become ICE)

791

* Working Humidity: <100% (no dewing)

792

* Power Consumption: 4mA @ 12v.

=== 6.1.3 Dimension ===

797

798

[[image:1656054957406-980.png]]

799

800

801

=== 6.1.4 Pin Mapping ===

802

803

[[image:1656054972828-692.png]]

804

805

806

=== 6.1.5 Installation Notice ===

807

808

(((

809

Do not power on while connect the cables. Double check the wiring before power on.

)))

(((

Installation Photo as reference:

)))

(((

(% style="color:#4472c4" %)** Install on Ground:**

)))

(((

WSS-01 Rain Gauge include screws so can install in ground directly .

)))

(((

(% style="color:#4472c4" %)** Install on pole:**

)))

(((

If user want to install on pole, they can purchase the (% style="color:#4472c4" %)** WS-K2 : Bracket Kit for Pole installation**(%%), and install as below:

832

)))

833

834

[[image:image-20220624152218-1.png||height="526" width="276"]]

835

836

WS-K2: Bracket Kit for Pole installation

837

838

839

WSSC-K2 dimension document, please see:

840

841

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/]]

842

843

844

== 6.2 Wind Speed/Direction ~-~- WSS-02 ==

845

846

[[image:1656055444035-179.png]]

847

848

(((

849

WSS-02 is a RS485 wind speed and wind direction monitor designed for weather station solution.

)))

(((

WSS-02 shell is made of polycarbonate composite material, which has good anti-corrosion and anti-corrosion characteristics, and ensure the long-term use of the sensor without rust. At the same time, it cooperates with the internal smooth bearing system to ensure the stability of information collection

)))

(((

Users only need to connect WSS-02 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload the wind speed and direction to the IoT Server via wireless LoRaWAN protocol.

)))

=== 6.2.1 Feature ===

862

863

* RS485 wind speed / direction sensor

864

* PC enclosure, resist corrosion

=== 6.2.2 Specification ===

869

870

* Wind speed range: 0 ~~ 30m/s, (always show 30m/s for higher speed)

871

* Wind direction range: 0 ~~ 360°

872

* Start wind speed: ≤0.3m/s

873

* Accuracy: ±（0.3＋0.03V）m/s , ±1°

874

* Input Power: DC 5~~24v

875

* Interface: RS485

876

* Working Temperature: -30℃～70℃

877

* Working Humidity: <100% (no dewing)

878

* Power Consumption: 13mA ~~ 12v.

879

* Cable Length: 2 meters

=== 6.2.3 Dimension ===

884

885

[[image:image-20220624152813-2.png]]

886

887

888

=== 6.2.4 Pin Mapping ===

889

890

[[image:1656056281231-994.png]]

891

892

893

=== 6.2.5 Angle Mapping ===

894

895

[[image:1656056303845-585.png]]

896

897

898

=== 6.2.6 Installation Notice ===

899

900

(((

901

Do not power on while connect the cables. Double check the wiring before power on.

)))

(((

The sensor must be installed with below direction, towards North.

906

)))

907

908

[[image:image-20220624153901-3.png]]

909

910

911

== 6.3 CO2/PM2.5/PM10 ~-~- WSS-03 ==

(((

WSS-03 is a RS485 Air Quality sensor. It can monitor CO2, PM2.5 and PM10 at the same time.

)))

(((

WSS-03 uses weather proof shield which can make sure the sensors are well protected against UV & radiation.

)))

(((

WSS-03 is designed to support the Dragino Weather station solution. Users only need to connect WSS-03 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload the environment CO2, PM2.5 and PM10 to the IoT Server via wireless LoRaWAN protocol.

)))

=== 6.3.1 Feature ===

928

929

* RS485 CO2, PM2.5, PM10 sensor

930

* NDIR to measure CO2 with Internal Temperature Compensation

931

* Laser Beam Scattering to PM2.5 and PM10

=== 6.3.2 Specification ===

936

937

* CO2 Range: 0～5000ppm, accuracy: ±3%F•S（25℃）

938

* CO2 resolution: 1ppm

939

* PM2.5/PM10 Range: 0～1000μg/m3 , accuracy ±3%F•S（25℃）

940

* PM2.5/PM10 resolution: 1μg/m3

941

* Input Power: DC 7 ~~ 24v

942

* Preheat time: 3min

943

* Interface: RS485

944

* Working Temperature:

945

** CO2: 0℃～50℃;

946

** PM2.5/PM10: -30 ~~ 50℃

947

* Working Humidity:

948

** PM2.5/PM10: 15～80%RH (no dewing)

949

** CO2: 0～95%RH

950

* Power Consumption: 50mA@ 12v.

=== 6.3.3 Dimension ===

955

956

[[image:1656056708366-230.png]]

957

958

959

=== 6.3.4 Pin Mapping ===

960

961

[[image:1656056722648-743.png]]

962

963

964

=== 6.3.5 Installation Notice ===

965

966

Do not power on while connect the cables. Double check the wiring before power on.

967

968

[[image:1656056751153-304.png]]

969

970

[[image:1656056766224-773.png]]

971

972

973

== 6.4 Rain/Snow Detect ~-~- WSS-04 ==

(((

WSS-04 is a RS485 rain / snow detect sensor. It can monitor Rain or Snow event.

)))

(((

WSS-04 has auto heating feature, this ensures measurement more reliable.

)))

(((

WSS-04 is designed to support the Dragino Weather station solution. Users only need to connect WSS-04 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload the SNOW/Rain Event to the IoT Server via wireless LoRaWAN protocol.

)))

=== 6.4.1 Feature ===

991

992

* RS485 Rain/Snow detect sensor

993

* Surface heating to dry

994

* grid electrode uses Electroless Nickel/Immersion Gold design for resist corrosion

=== 6.4.2 Specification ===

999

1000

* Detect if there is rain or snow

1001

* Input Power: DC 12 ~~ 24v

1002

* Interface: RS485

1003

* Working Temperature: -30℃～70℃

1004

* Working Humidity: 10～90%RH

1005

* Power Consumption:

1006

** No heating: 12mA @ 12v,

1007

** heating: 94ma @ 12v.

=== 6.4.3 Dimension ===

1012

1013

[[image:1656056844782-155.png]]

1014

1015

1016

=== 6.4.4 Pin Mapping ===

1017

1018

[[image:1656056855590-754.png]]

1019

1020

1021

=== 6.4.5 Installation Notice ===

1022

1023

Do not power on while connect the cables. Double check the wiring before power on.

(((

Install with 15°degree.

1028

)))

1029

1030

[[image:1656056873783-780.png]]

1031

1032

1033

[[image:1656056883736-804.png]]

1034

1035

1036

=== 6.4.6 Heating ===

1037

1038

(((

1039

WSS-04 supports auto-heat feature. When the temperature is below the heat start temperature 15℃, WSS-04 starts to heat and stop at stop temperature (default is 25℃).

)))

== 6.5 Temperature, Humidity, Illuminance, Pressure ~-~- WSS-05 ==

(((

WSS-05 is a 4 in 1 RS485 sensor which can monitor Temperature, Humidity, Illuminance and Pressure at the same time.

)))

(((

WSS-05 is designed to support the Dragino Weather station solution. Users only need to connect WSS-05 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload environment Temperature, Humidity, Illuminance, Pressure to the IoT Server via wireless LoRaWAN protocol.

)))

=== 6.5.1 Feature ===

1056

1057

* RS485 Temperature, Humidity, Illuminance, Pressure sensor

=== 6.5.2 Specification ===

1062

1063

* Input Power: DC 12 ~~ 24v

1064

* Interface: RS485

1065

* Temperature Sensor Spec:

** Range: -30 ~~ 70℃

** resolution 0.1℃

** Accuracy: ±0.5℃

* Humidity Sensor Spec:

1070

** Range: 0 ~~ 100% RH

1071

** resolution 0.1 %RH

1072

** Accuracy: 3% RH

1073

* Pressure Sensor Spec:

1074

** Range: 10～1100hPa

1075

** Resolution: 0.1hPa

1076

** Accuracy: ±0.1hPa

1077

* Illuminate sensor:

1078

** Range: 0～2/20/200kLux

1079

** Resolution: 10 Lux

1080

** Accuracy: ±3％FS

1081

* Working Temperature: -30℃～70℃

1082

* Working Humidity: 10～90%RH

1083

* Power Consumption: 4mA @ 12v

=== 6.5.3 Dimension ===

1088

1089

[[image:1656057170639-522.png]]

1090

1091

1092

=== 6.5.4 Pin Mapping ===

1093

1094

[[image:1656057181899-910.png]]

1095

1096

1097

=== 6.5.5 Installation Notice ===

1098

1099

Do not power on while connect the cables. Double check the wiring before power on.

1100

1101

[[image:1656057199955-514.png]]

1102

1103

1104

[[image:1656057212438-475.png]]

1105

1106

1107

== 6.6 Total Solar Radiation sensor ~-~- WSS-06 ==

(((

WSS-06 is Total Radiation Sensor can be used to measure the total solar radiation in the spectral range of 0.3 to 3 μm (300 to 3000 nm). If the sensor face is down, the reflected radiation can be measured, and the shading ring can also be used to measure the scattered radiation.

)))

(((

The core device of the radiation sensor is a high-precision photosensitive element, which has good stability and high precision; at the same time, a precision-machined PTTE radiation cover is installed outside the sensing element, which effectively prevents environmental factors from affecting its performance

)))

(((

WSS-06 is designed to support the Dragino Weather station solution. Users only need to connect WSS-06 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload Total Solar Radiation to the IoT Server via wireless LoRaWAN protocol.

)))

=== 6.6.1 Feature ===

1125

1126

* RS485 Total Solar Radiation sensor

1127

* Measure Total Radiation between 0.3～3μm（300～3000nm）

1128

* Measure Reflected Radiation if sense area towards ground.

=== 6.6.2 Specification ===

1133

1134

* Input Power: DC 5 ~~ 24v

1135

* Interface: RS485

1136

* Detect spectrum: 0.3～3μm（300～3000nm）

1137

* Measure strength range: 0～2000W/m2

1138

* Resolution: 0.1W/m2

1139

* Accuracy: ±3%

1140

* Yearly Stability: ≤±2％

1141

* Cosine response: ≤7％ (@ Sun angle 10°)

1142

* Temperature Effect: ±2％（－10℃～40℃）

1143

* Working Temperature: -40℃～70℃

1144

* Working Humidity: 10～90%RH

1145

* Power Consumption: 4mA @ 12v

=== 6.6.3 Dimension ===

1150

1151

[[image:1656057348695-898.png]]

1152

1153

1154

=== 6.6.4 Pin Mapping ===

1155

1156

[[image:1656057359343-744.png]]

1157

1158

1159

=== 6.6.5 Installation Notice ===

1160

1161

Do not power on while connect the cables. Double check the wiring before power on.

1162

1163

[[image:1656057369259-804.png]]

1164

1165

1166

[[image:1656057377943-564.png]]

1167

1168

1169

== 6.7 PAR (Photosynthetically Available Radiation) ~-~- WSS-07 ==

(((

WSS-07 photosynthetically active radiation sensor is mainly used to measure the photosynthetically active radiation of natural light in the wavelength range of 400-700nm.

)))

(((

WSS-07 use precision optical detectors and has an optical filter of 400-700nm, when natural light is irradiated, a voltage signal proportional to the intensity of the incident radiation is generated, and its luminous flux density is proportional to the cosine of the direct angle of the incident light.

)))

(((

WSS-07 is designed to support the Dragino Weather station solution. Users only need to connect WSS-07 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload Photosynthetically Available Radiation to the IoT Server via wireless LoRaWAN protocol.

)))

=== 6.7.1 Feature ===

1186

1187

(((

1188

PAR (Photosynthetically Available Radiation) sensor measure 400 ~~ 700nm wavelength nature light's Photosynthetically Available Radiation.

)))

(((

When nature light shine on the sense area, it will generate a signal base on the incidence radiation strength.

)))

=== 6.7.2 Specification ===

1197

1198

* Input Power: DC 5 ~~ 24v

1199

* Interface: RS485

1200

* Response Spectrum: 400～700nm

1201

* Measure range: 0～2500μmol/m2•s

1202

* Resolution: 1μmol/m2•s

1203

* Accuracy: ±2%

1204

* Yearly Stability: ≤±2％

1205

* Working Temperature: -30℃～75℃

1206

* Working Humidity: 10～90%RH

1207

* Power Consumption: 3mA @ 12v

=== 6.7.3 Dimension ===

1212

1213

[[image:1656057538793-888.png]]

1214

1215

1216

=== 6.7.4 Pin Mapping ===

1217

1218

[[image:1656057548116-203.png]]

1219

1220

1221

=== 6.7.5 Installation Notice ===

1222

1223

Do not power on while connect the cables. Double check the wiring before power on.

1224

1225

1226

[[image:1656057557191-895.png]]

1227

1228

1229

[[image:1656057565783-251.png]]

= 7. FAQ =

== 7.1 What else do I need to purchase to build Weather Station? ==

1235

1236

Below is the installation photo and structure:

1237

1238

[[image:1656057598349-319.png]]

1239

1240

1241

[[image:1656057608049-693.png]]

== 7.2 How to upgrade firmware for WSC1-L? ==

1246

1247

(((

1248

Firmware Location & Change log:

)))

(((

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/WSC1-L/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/WSC1-L/]]

)))

(((

Firmware Upgrade instruction: [[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome||anchor="H2.HardwareUpgradeMethodSupportList"]]

)))

== 7.3 How to change the LoRa Frequency Bands/Region? ==

1262

1263

User can follow the introduction for how to [[upgrade image>>||anchor="H7.2HowtoupgradefirmwareforWSC1-L3F"]]. When download the images, choose the required image file for download.

1264

1265

1266

== 7.4 Can I add my weather sensors? ==

1267

1268

Yes, connect the sensor to RS485 bus and see instruction: [[add sensors.>>||anchor="H3.3AddorDeleteRS485Sensor"]]

1269

1270

1271

= 8. Trouble Shooting =

1272

1273

== 8.1 AT Command input doesn't work ==

1274

1275

(((

1276

In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.

)))

= 9. Order Info =

== 9.1 Main Process Unit ==

1283

1284

Part Number: (% style="color:blue" %)**WSC1-L-XX**

1285

1286

(% style="color:blue" %)**XX**(%%): The default frequency band

1287

1288

* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band

1289

* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band

1290

* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band

1291

* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band

1292

* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band

1293

* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band

1294

* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band

1295

* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band

== 9.2 Sensors ==

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:500px" %)

1302

|=(% style="width: 300px;" %)**Sensor Model**|=(% style="width: 200px;" %)**Part Number**

1303

|(% style="width:462px" %)**Rain Gauge**|(% style="width:120px" %)WSS-01

1304

|(% style="width:462px" %)**Rain Gauge installation Bracket for Pole**|(% style="width:120px" %)WS-K2

1305

|(% style="width:462px" %)**Wind Speed Direction 2 in 1 Sensor**|(% style="width:120px" %)WSS-02

1306

|(% style="width:462px" %)**CO2/PM2.5/PM10 3 in 1 Sensor**|(% style="width:120px" %)WSS-03

1307

|(% style="width:462px" %)**Rain/Snow Detect Sensor**|(% style="width:120px" %)WSS-04

1308

|(% style="width:462px" %)**Temperature, Humidity, illuminance and Pressure 4 in 1 sensor**|(% style="width:120px" %)WSS-05

1309

|(% style="width:462px" %)**Total Solar Radiation Sensor**|(% style="width:120px" %)WSS-06

1310

|(% style="width:462px" %)**PAR (Photosynthetically Available Radiation)**|(% style="width:120px" %)WSS-07

= 10. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1316

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]

= 11. Appendix I: Field Installation Photo =

1321

1322

1323

[[image:1656058346362-132.png||height="685" width="732"]]

1324

1325

**Storage Battery**: 12v,12AH li battery