Dragino LoRaWAN Weather Station User Manual

Dragino LoRaWAN weather station series products are designed for measuring atmospheric conditions to provide information for weather forecasts and to study the (% style="color:#4472c4" %)**weather and climate**(%%). They consist of a (% style="color:#4472c4" %)**main process device (WSC1-L) and various sensors**.

25

)))

26

27

(((

28

The sensors include various type such as: (% style="color:#4472c4" %)**Rain Gauge**, **Temperature/Humidity/Pressure sensor**, **Wind Speed/direction sensor**, **Illumination sensor**, **CO2 sensor**, **Rain/Snow sensor**,** PM2.5/10 sensor**, **PAR(Photosynthetically Available Radiation) sensor, Total Solar Radiation sensor**(%%) and so on.

)))

(((

Main process device WSC1-L is an outdoor LoRaWAN RS485 end node. It is powered by external (% style="color:#4472c4" %)**12v solar power**(%%) and have a (% style="color:#4472c4" %)**built-in li-on backup battery**(%%). WSC1-L reads value from various sensors and upload these sensor data to IoT server via LoRaWAN wireless protocol.

)))

(((

WSC1-L is full compatible with(% style="color:#4472c4" %)** LoRaWAN Class C protocol**(%%), it can work with standard LoRaWAN gateway.

)))

= 2. How to use =

== 2.1 Installation ==

44

45

Below is an installation example for the weather station. Field installation example can be found at [[Appendix I: Field Installation Photo.>>||anchor="H11.AppendixI:FieldInstallationPhoto"]]

46

47

[[image:1656041948552-849.png]]

48

49

50

(% style="color:blue" %)** Wiring:**

51

52

~1. WSC1-L and sensors all powered by solar power via MPPT

53

54

2. WSC1-L and sensors connect to each other via RS485/Modbus.

55

56

3. WSC1-L read value from each sensor and send uplink via LoRaWAN

57

58

59

WSC1-L is shipped with a RS485 converter board, for the easy connection to different sensors and WSC1-L. Below is a connection photo:

60

61

[[image:1656042136605-251.png]]

62

63

64

(% style="color:red" %) ** Notice 1:**

65

66

* All weather sensors and WSC1-L are powered by MPPT solar recharge controller. MPPT is connected to solar panel and storage battery.

67

* WSC1-L has an extra 1000mAh back up battery. So it can work even solar panel and storage battery Fails.

68

* Weather sensors won’t work if solar panel and storage battery fails.

(% style="color:red" %)** Notice 2:**

73

74

Due to shipment and importation limitation, user is better to purchase below parts locally:

* Solar Panel

* Storage Battery

* MPPT Solar Recharger

79

* Mounting Kit includes pole and mast assembly. Each weather sensor has it’s own mounting assembly, user can check the sensor section in this manual.

* Cabinet.

== 2.2 How it works? ==

88

89

(((

90

Each WSC1-L is shipped with a worldwide unique set of OTAA keys. To use WSC1-L in a LoRaWAN network, user needs to input the OTAA keys in LoRaWAN network server. After finish installation as above. Create WSC1-L in your LoRaWAN server and Power on WSC1-L , it can join the LoRaWAN network and start to transmit sensor data. The default period for each uplink is 20 minutes.

)))

Open WSC1-L and put the yellow jumper as below position to power on WSC1-L.

95

96

[[image:1656042192857-709.png]]

97

98

99

(% style="color:red" %)**Notice:**

100

101

1. WSC1-L will auto scan available weather sensors when power on or reboot.

102

1. User can send a downlink command to WSC1-L to do a re-scan on the available sensors.

== 2.3 Example to use for LoRaWAN network ==

110

111

This section shows an example for how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.

112

113

114

[[image:1656042612899-422.png]]

Assume the DLOS8 is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. We need to add the WSC1-L device in TTN V3:

119

120

121

(% style="color:blue" %)**Step 1**(%%): Create a device in TTN V3 with the OTAA keys from WSC1-L.

122

123

Each WSC1-L is shipped with a sticker with the default device EUI as below:

124

125

[[image:image-20220624115043-1.jpeg]]

126

127

128

User can enter these keys in the LoRaWAN Server portal. Below is TTN V3 screen shot:

129

130

**Add APP EUI in the application.**

131

132

[[image:1656042662694-311.png]]

133

134

[[image:1656042673910-429.png]]

**Choose Manually to add WSC1-L**

140

141

[[image:1656042695755-103.png]]

**Add APP KEY and DEV EUI**

146

147

[[image:1656042723199-746.png]]

(% style="color:blue" %)**Step 2**(%%): Power on WSC1-L, it will start to join TTN server. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.

152

153

154

[[image:1656042745346-283.png]]

== 2.4 Uplink Payload ==

159

160

Uplink payloads include two types: Valid Sensor Value and other status / control command.

161

162

* Valid Sensor Value: Use FPORT=2

163

* Other control command: Use FPORT other than 2.

164

165

166

=== 2.4.1 Uplink FPORT~=5, Device Status ===

167

168

Uplink the device configures with FPORT=5. Once WSC1-L Joined the network, it will uplink this message to the server. After first uplink, WSC1-L will uplink Device Status every 12 hours

(((

User can also use downlink command(0x2301) to ask WSC1-L to resend this uplink

173

)))

174

175

(% border="1" cellspacing="8" style="background-color:#ffffcc; color:green; width:500px" %)

176

177

|(% style="width:99px" %)**Value**|(% style="width:112px" %)[[Sensor Model>>||anchor="HSensorModel:"]]|(% style="width:135px" %)[[Firmware Version>>||anchor="HFirmwareVersion:"]]|(% style="width:126px" %)[[Frequency Band>>||anchor="HFrequencyBand:"]]|(% style="width:85px" %)[[Sub-band>>||anchor="HSub-Band:"]]|(% style="width:46px" %)[[BAT>>||anchor="HBAT:"]]|(% style="width:166px" %)[[Weather Sensor Types>>||anchor="HWeatherSensorTypes:"]]

178

179

[[image:1656043061044-343.png]]

180

181

182

Example Payload (FPort=5): [[image:image-20220624101005-1.png]]

==== (% style="color:#037691" %)**Sensor Model:**(%%) ====

187

188

For WSC1-L, this value is 0x0D.

==== (% style="color:#037691" %)**Firmware Version:**(%%) ====

193

194

0x0100, Means: v1.0.0 version.

==== (% style="color:#037691" %)**Frequency Band:**(%%) ====

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0x0a: AS923-3

==== (% style="color:#037691" %)**Sub-Band:**(%%) ====

223

224

value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)

==== (% style="color:#037691" %)**BAT:**(%%) ====

229

230

shows the battery voltage for WSC1-L MCU.

231

232

Ex1: 0x0BD6/1000 = 3.03 V

==== (% style="color:#037691" %)**Weather Sensor Types:**(%%) ====

237

238

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:100px" %)

239

|Byte3|Byte2|Byte1

240

241

Bit = 1 means this sensor is connected, Bit=0 means this sensor is not connected

242

243

[[image:image-20220624134713-1.png]]

244

245

246

Eg: 0x1000FE = 1 0000 0000 0000 1111 1110(b)

247

248

External sensors detected by WSC1-L include :

custom sensor A1,

PAR sensor (WSS-07),

Total Solar Radiation sensor (WSS-06),

255

256

CO2/PM2.5/PM10 (WSS-03),

257

258

Wind Speed/Direction (WSS-02)

259

260

261

User can also use downlink command(0x26 01) to ask WSC1-L to resend this uplink :

262

263

(% style="color:#037691" %)**Downlink:0x26 01**

264

265

[[image:1656049673488-415.png]]

=== 2.4.2 Uplink FPORT~=2, Real time sensor value ===

270

271

(((

272

WSC1-L will send this uplink after Device Config uplink once join LoRaWAN network successfully. And it will periodically send this uplink. Default interval is 20 minutes and [[can be changed>>||anchor="H3.1SetTransmitIntervalTime"]].

)))

(((

Uplink uses FPORT=2 and every 20 minutes send one uplink by default.

)))

(((

The upload length is dynamic, depends on what type of weather sensors are connected. The uplink payload is combined with sensor segments. As below:

)))

(% style="color:#4472c4" %)** Uplink Payload**:

286

287

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:464px" %)

288

|(% style="width:140px" %)Sensor Segment 1|(% style="width:139px" %)Sensor Segment 2|(% style="width:42px" %)……|(% style="width:140px" %)Sensor Segment n

289

290

(% style="color:#4472c4" %)** Sensor Segment Define**:

291

292

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:330px" %)

293

|(% style="width:89px" %)Type Code|(% style="width:114px" %)Length (Bytes)|(% style="width:124px" %)Measured Value

294

295

(% style="color:#4472c4" %)**Sensor Type Table:**

296

297

[[image:image-20220624140352-2.png]]

298

299

300

Below is an example payload: [[image:image-20220624140615-3.png]]

301

302

303

When sending this payload to LoRaWAN server. WSC1-L will send this in one uplink or several uplinks according to LoRaWAN spec requirement. For example, total length of Payload is 54 bytes.

304

305

* When WSC1-L sending in US915 frequency DR0 data rate. Because this data rate has limitation of 11 bytes payload for each uplink. The payload will be split into below packets and uplink.

306

307

Uplink 1: [[image:image-20220624140735-4.png]]

308

309

Uplink 2: [[image:image-20220624140842-5.png]]

310

311

312

* When WSC1-L sending in EU868 frequency DR0 data rate. The payload will be split into below packets and uplink:

313

314

Uplink 1: [[image:image-20220624141025-6.png]]

315

316

Uplink 2: [[image:image-20220624141100-7.png]]

=== 2.4.3 Decoder in TTN V3 ===

322

323

In LoRaWAN platform, user only see HEX payload by default, user needs to use payload formatters to decode the payload to see human-readable value.

324

325

326

Download decoder for suitable platform from:

327

328

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/WSC1-L/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/WSC1-L/]]

and put as below:

[[image:1656051152438-578.png]]

== 2.5 Show data on Application Server ==

337

338

Application platform provides a human friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:

339

340

341

(% style="color:blue" %)**Step 1**(%%): Be sure that your device is programmed and properly connected to the LoRaWAN network.

342

343

(% style="color:blue" %)**Step 2**(%%): Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.

344

345

[[image:1656051197172-131.png]]

**Add TagoIO:**

[[image:1656051223585-631.png]]

**Authorization:**

[[image:1656051248318-368.png]]

356

357

358

In TagoIO console ([[https:~~/~~/admin.tago.io~~/~~/>>url:https://datacake.co/]]) , add WSC1-L:

359

360

[[image:1656051277767-168.png]]

= 3. Configure WSC1-L via AT Command or LoRaWAN Downlink =

365

366

Use can configure WSC1-L via AT Command or LoRaWAN Downlink.

367

368

* AT Command Connection: See [[FAQ>>||anchor="H7.FAQ"]].

369

* LoRaWAN Downlink instruction for different platforms: [[Use Note for Server>>doc:Main.WebHome]](IoT LoRaWAN Server)

370

371

There are two kinds of commands to configure WSC1-L, they are:

372

373

* (% style="color:#4472c4" %)**General Commands**.

374

375

These commands are to configure:

376

377

* General system settings like: uplink interval.

378

* LoRaWAN protocol & radio related command.

379

380

They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack((% style="color:red" %)Note~*~*)(%%). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]

381

382

(% style="color:red" %)Note~*~*: Please check early user manual if you don’t have v1.8.0 firmware.

383

384

385

* (% style="color:#4472c4" %)**Commands special design for WSC1-L**

386

387

These commands only valid for WSC1-L, as below:

== 3.1 Set Transmit Interval Time ==

395

396

Feature: Change LoRaWAN End Node Transmit Interval.

397

398

(% style="color:#037691" %)**AT Command: AT+TDC**

399

400

[[image:image-20220624142619-8.png]]

401

402

403

(% style="color:#037691" %)**Downlink Command: 0x01**

404

405

Format: Command Code (0x01) followed by 3 bytes time value.

406

407

If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.

408

409

* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds

410

* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds

== 3.2 Set Emergency Mode ==

418

419

Feature: In emergency mode, WSC1-L will uplink data every 1 minute.

420

421

(% style="color:#037691" %)**AT Command:**

422

423

[[image:image-20220624142956-9.png]]

424

425

426

(% style="color:#037691" %)**Downlink Command:**

427

428

* 0xE101 Same as: AT+ALARMMOD=1

429

* 0xE100 Same as: AT+ALARMMOD=0

== 3.3 Add or Delete RS485 Sensor ==

437

438

Feature: User can add or delete 3^^rd^^ party sensor as long they are RS485/Modbus interface,baud rate support 9600.Maximum can add 4 sensors.

439

440

(% style="color:#037691" %)**AT Command: **

441

442

(% style="color:blue" %)**AT+DYSENSOR=Type_Code, Query_Length, Query_Command , Read_Length , Valid_Data ,has_CRC,timeout**

443

444

* Type_Code range: A1 ~~ A4

445

* Query_Length: RS485 Query frame length, Value cannot be greater than 10

446

* Query_Command: RS485 Query frame data to be sent to sensor, cannot be larger than 10 bytes

447

* Read_Length: RS485 response frame length supposed to receive. Max can receive

448

* Valid_Data: valid data from RS485 Response, Valid Data will be added to Payload and upload via LoRaWAN.

449

* has_CRC: RS485 Response crc check (0: no verification required 1: verification required). If CRC=1 and CRC error, valid data will be set to 0.

450

* timeout: RS485 receive timeout (uint:ms). Device will close receive window after timeout

**Example:**

User need to change external sensor use the type code as address code.

455

456

With a 485 sensor, after correctly changing the address code to A1, the RS485 query frame is shown in the following table:

457

458

[[image:image-20220624143553-10.png]]

459

460

461

The response frame of the sensor is as follows:

462

463

[[image:image-20220624143618-11.png]]

464

465

466

**Then the following parameters should be:**

467

468

* Address_Code range: A1

469

* Query_Length: 8

470

* Query_Command: A103000000019CAA

471

* Read_Length: 8

472

* Valid_Data: 24 (Indicates that the data length is 2 bytes, starting from the 4th byte)

473

* has_CRC: 1

474

* timeout: 1500 (Fill in the test according to the actual situation)

475

476

**So the input command is:**

477

478

AT+DYSENSOR=A1,8,A103000000019CAA,8,24,1,1500

479

480

481

In every sampling. WSC1-L will auto append the sensor segment as per this structure and uplink.

482

483

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:351px" %)

484

|=(% style="width: 94px;" %)Type Code|=(% style="width: 121px;" %)Length (Bytes)|=(% style="width: 132px;" %)Measured Value

485

|(% style="width:94px" %)A1|(% style="width:121px" %)2|(% style="width:132px" %)0x000A

486

487

**Related commands:**

488

489

AT+DYSENSOR=A1,0 ~-~-> Delete 3^^rd^^ party sensor A1.

490

491

AT+DYSENSOR ~-~-> List All 3^^rd^^ Party Sensor. Like below:

492

493

494

(% style="color:#037691" %)**Downlink Command: **

495

496

**delete custom sensor A1:**

497

498

* 0xE5A1 Same as: AT+DYSENSOR=A1,0

499

500

**Remove all custom sensors**

* 0xE5FF

== 3.4 RS485 Test Command ==

510

511

(% style="color:#037691" %)**AT Command:**

512

513

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:474px" %)

514

|=(% style="width: 159px;" %)**Command Example**|=(% style="width: 227px;" %)**Function**|=(% style="width: 85px;" %)**Response**

515

|(% style="width:159px" %)AT+RSWRITE=xxxxxx|(% style="width:227px" %)(((

516

Send command to 485 sensor

517

518

Range : no more than 10 bytes

519

)))|(% style="width:85px" %)OK

520

521

Eg: Send command **01 03 00 00 00 01 84 0A** to 485 sensor

522

523

AT+RSWRITE=0103000001840A

524

525

526

(% style="color:#037691" %)**Downlink Command:**

527

528

* 0xE20103000001840A Same as: AT+RSWRITE=0103000001840A

== 3.5 RS485 response timeout ==

536

537

Feature: Set or get extended time to receive 485 sensor data.

538

539

(% style="color:#037691" %)**AT Command:**

540

541

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:433px" %)

542

|=(% style="width: 157px;" %)**Command Example**|=(% style="width: 188px;" %)**Function**|=(% style="width: 85px;" %)**Response**

543

|(% style="width:157px" %)AT+DTR=1000|(% style="width:188px" %)(((

544

Set response timeout to:

545

546

Range : 0~~10000

547

)))|(% style="width:85px" %)OK

548

549

(% style="color:#037691" %)**Downlink Command:**

550

551

Format: Command Code (0xE0) followed by 3 bytes time value.

552

553

If the downlink payload=E0000005, it means set the END Node’s Transmit Interval to 0x000005=5(S), while type code is E0.

554

555

* Example 1: Downlink Payload: E0000005 ~/~/ Set Transmit Interval (DTR) = 5 seconds

556

* Example 2: Downlink Payload: E000000A ~/~/ Set Transmit Interval (DTR) = 10 seconds

== 3.6 Set Sensor Type ==

564

565

Feature: Set sensor in used. If there are 6 sensors, user can set to only send 5 sensors values.

566

567

See [[definition>>||anchor="HWeatherSensorTypes:"]] for the sensor type.

568

569

[[image:image-20220624144904-12.png]]

570

571

572

(% style="color:#037691" %)**AT Command:**

573

574

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:377px" %)

575

|=(% style="width: 157px;" %)**Command Example**|=(% style="width: 130px;" %)**Function**|=(% style="width: 87px;" %)**Response**

576

|(% style="width:157px" %)AT+STYPE=80221|(% style="width:130px" %)Set sensor types|(% style="width:87px" %)OK

577

578

Eg: The setting command **AT+STYPE=802212** means:

579

580

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:495px" %)

So wsc1-L will upload the following data: Custom Sensor A1, Rain Gauge,CO2,BAT.

589

590

591

(% style="color:#037691" %)**Downlink Command:**

592

593

* 0xE400802212 Same as: AT+STYPE=80221

594

595

(% style="color:red" %)**Note:**

596

597

~1. The sensor type will not be saved to flash, and the value will be updated every time the sensor is restarted or rescanned.

= 4. Power consumption and battery =

603

604

== 4.1 Total Power Consumption ==

605

606

Dragino Weather Station serial products include the main process unit ( WSC1-L ) and various sensors. The total power consumption equal total power of all above units. The power consumption for main process unit WSC1-L is 18ma @ 12v. and the power consumption of each sensor can be found on the Sensors chapter.

607

608

609

== 4.2 Reduce power consumption ==

610

611

The main process unit WSC1-L is set to LoRaWAN Class C by default. If user want to reduce the power consumption of this unit, user can set it to run in Class A. In Class A mode, WSC1-L will not be to get real-time downlink command from IoT Server.

== 4.3 Battery ==

(((

All sensors are only power by external power source. If external power source is off. All sensor won't work.

)))

(((

Main Process Unit WSC1-L is powered by both external power source and internal 1000mAh rechargeable battery. If external power source is off, WSC1-L still runs and can send periodically uplinks, but the sensors value will become invalid. External power source can recharge the 1000mAh rechargeable battery.

)))

= 5. Main Process Unit WSC1-L =

== 5.1 Features ==

* Wall Attachable.

* LoRaWAN v1.0.3 Class A protocol.

631

* RS485 / Modbus protocol

632

* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915

633

* AT Commands to change parameters

634

* Remote configure parameters via LoRaWAN Downlink

635

* Firmware upgradable via program port

636

* Powered by external 12v battery

637

* Back up rechargeable 1000mAh battery

638

* IP Rating: IP65

639

* Support default sensors or 3rd party RS485 sensors

640

641

== 5.2 Power Consumption ==

642

643

WSC1-L (without external sensor): Idle: 4mA, Transmit: max 40mA

644

645

646

== 5.3 Storage & Operation Temperature ==

-20°C to +60°C

== 5.4 Pin Mapping ==

652

653

[[image:1656054149793-239.png]]

== 5.5 Mechanical ==

Refer LSn50v2 enclosure drawing in: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Mechanical_Drawing/>>url:https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Mechanical_Drawing/]]

659

660

661

== 5.6 Connect to RS485 Sensors ==

662

663

WSC1-L includes a RS485 converter PCB. Which help it easy to connect multiply RS485 sensors. Below is the photo for reference.

664

665

666

[[image:1656054389031-379.png]]

667

668

669

Hardware Design for the Converter Board please see:

670

671

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/RS485_Converter_Board/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/RS485_Converter_Board/]]

672

673

674

= 6. Weather Sensors =

675

676

== 6.1 Rain Gauge ~-~- WSS-01 ==

(((

WSS-01 RS485 Rain Gauge is used in meteorology and hydrology to gather and measure the amount of liquid precipitation (mainly rainfall) over an area.

)))

(((

WSS-01 uses a tipping bucket to detect rainfall. The tipping bucket use 3D streamline shape to make sure it works smoothly and is easy to clean.

)))

(((

WSS-01 is designed to support the Dragino Weather station solution. Users only need to connect WSS-01 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload the rainfall to the IoT Server via wireless LoRaWAN protocol

)))

(((

The tipping bucket of WSS-01 is adjusted to the best angle. When installation, user only needs to screw up and adjust the bottom horizontally.

)))

(((

WSS-01 package includes screw which can be installed to ground. If user want to install WSS-01 on pole, they can purchase WS-K2 bracket kit.

)))

=== 6.1.1 Feature ===

701

702

* RS485 Rain Gauge

703

* Small dimension, easy to install

704

* Vents under funnel, avoid leaf or other things to avoid rain flow.

705

* ABS enclosure.

706

* Horizontal adjustable.

=== 6.1.2 Specification ===

* Resolution: 0.2mm

* Accuracy: ±3%

* Rainfall strength: 0mm～4mm/min (max 8mm/min)

715

* Input Power: DC 5~~24v

716

* Interface: RS485

717

* Working Temperature: 0℃～70℃ ( incorrect below 0 degree, because water become ICE)

718

* Working Humidity: <100% (no dewing)

719

* Power Consumption: 4mA @ 12v.

=== 6.1.3 Dimension ===

724

725

[[image:1656054957406-980.png]]

726

727

728

=== 6.1.4 Pin Mapping ===

729

730

[[image:1656054972828-692.png]]

731

732

733

=== 6.1.5 Installation Notice ===

734

735

Do not power on while connect the cables. Double check the wiring before power on.

736

737

Installation Photo as reference:

738

739

740

(% style="color:#4472c4" %)** Install on Ground:**

741

742

WSS-01 Rain Gauge include screws so can install in ground directly .

743

744

745

(% style="color:#4472c4" %)** Install on pole:**

746

747

If user want to install on pole, they can purchase the (% style="color:#4472c4" %)** WS-K2 : Bracket Kit for Pole installation**(%%), and install as below:

748

749

[[image:image-20220624152218-1.png||height="526" width="276"]]

750

751

WS-K2: Bracket Kit for Pole installation

WSSC-K2 dimension document, please see:

756

757

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/]]

758

759

760

== 6.2 Wind Speed/Direction ~-~- WSS-02 ==

761

762

[[image:1656055444035-179.png]]

763

764

(((

765

WSS-02 is a RS485 wind speed and wind direction monitor designed for weather station solution.

)))

(((

WSS-02 shell is made of polycarbonate composite material, which has good anti-corrosion and anti-corrosion characteristics, and ensure the long-term use of the sensor without rust. At the same time, it cooperates with the internal smooth bearing system to ensure the stability of information collection

)))

(((

Users only need to connect WSS-02 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload the wind speed and direction to the IoT Server via wireless LoRaWAN protocol.

)))

=== 6.2.1 Feature ===

778

779

* RS485 wind speed / direction sensor

780

* PC enclosure, resist corrosion

=== 6.2.2 Specification ===

785

786

* Wind speed range: 0 ~~ 30m/s, (always show 30m/s for higher speed)

787

* Wind direction range: 0 ~~ 360°

788

* Start wind speed: ≤0.3m/s

789

* Accuracy: ±（0.3＋0.03V）m/s , ±1°

790

* Input Power: DC 5~~24v

791

* Interface: RS485

792

* Working Temperature: -30℃～70℃

793

* Working Humidity: <100% (no dewing)

794

* Power Consumption: 13mA ~~ 12v.

795

* Cable Length: 2 meters

=== 6.2.3 Dimension ===

800

801

[[image:image-20220624152813-2.png]]

802

803

804

=== 6.2.4 Pin Mapping ===

805

806

[[image:1656056281231-994.png]]

807

808

809

=== 6.2.5 Angle Mapping ===

810

811

[[image:1656056303845-585.png]]

812

813

814

=== 6.2.6 Installation Notice ===

815

816

Do not power on while connect the cables. Double check the wiring before power on.

817

818

The sensor must be installed with below direction, towards North.

819

820

[[image:image-20220624153901-3.png]]

821

822

823

== 6.3 CO2/PM2.5/PM10 ~-~- WSS-03 ==

824

825

WSS-03 is a RS485 Air Quality sensor. It can monitor CO2, PM2.5 and PM10 at the same time.

826

827

828

WSS-03 uses weather proof shield which can make sure the sensors are well protected against UV & radiation.

829

830

831

WSS-03 is designed to support the Dragino Weather station solution.

832

833

Users only need to connect WSS-03 RS485 interface to WSC1-L. The weather station main

834

835

processor WSC1-L can detect and upload the environment CO2, PM2.5 and PM10 to the IoT Server via wireless LoRaWAN protocol.

836

837

838

=== 6.3.1 Feature ===

839

840

* RS485 CO2, PM2.5, PM10 sensor

841

* NDIR to measure CO2 with Internal Temperature Compensation

842

* Laser Beam Scattering to PM2.5 and PM10

=== 6.3.2 Specification ===

847

848

* CO2 Range: 0～5000ppm, accuracy: ±3%F•S（25℃）

849

* CO2 resolution: 1ppm

850

* PM2.5/PM10 Range: 0～1000μg/m3 , accuracy ±3%F•S（25℃）

851

* PM2.5/PM10 resolution: 1μg/m3

852

* Input Power: DC 7 ~~ 24v

853

* Preheat time: 3min

854

* Interface: RS485

855

* Working Temperature:

856

** CO2: 0℃～50℃;

857

** PM2.5/PM10: -30 ~~ 50℃

858

* Working Humidity:

859

** PM2.5/PM10: 15～80%RH (no dewing)

860

** CO2: 0～95%RH

861

* Power Consumption: 50mA@ 12v.

=== 6.3.3 Dimension ===

866

867

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]

868

869

870

=== 6.3.4 Pin Mapping ===

871

872

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

873

874

875

=== 6.3.5 Installation Notice ===

876

877

Do not power on while connect the cables. Double check the wiring before power on.

878

879

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image029.png]]

880

881

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]

== 6.4 Rain/Snow Detect ~-~- WSS-04 ==

889

890

WSS-04 is a RS485 rain / snow detect sensor. It can monitor Rain or Snow event.

891

892

893

WSS-04 has auto heating feature, this ensures measurement more reliable.

894

895

896

WSS-04 is designed to support the Dragino Weather station solution.

897

898

Users only need to connect WSS-04 RS485 interface to WSC1-L. The weather station main

899

900

processor WSC1-L can detect and upload the SNOW/Rain Event to the IoT Server via wireless LoRaWAN protocol.

=== 6.4.1 Feature ===

905

906

* RS485 Rain/Snow detect sensor

907

* Surface heating to dry

908

* grid electrode uses Electroless Nickel/Immersion Gold design for resist corrosion

=== 6.4.2 Specification ===

913

914

* Detect if there is rain or snow

915

* Input Power: DC 12 ~~ 24v

916

* Interface: RS485

917

* Working Temperature: -30℃～70℃

918

* Working Humidity: 10～90%RH

919

* Power Consumption:

920

** No heating: 12mA @ 12v,

921

** heating: 94ma @ 12v.

=== 6.4.3 Dimension ===

926

927

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]

928

929

930

=== 6.4.4 Pin Mapping ===

931

932

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

933

934

935

=== 6.4.5 Installation Notice ===

936

937

Do not power on while connect the cables. Double check the wiring before power on.

938

939

940

Install with 15°degree.

941

942

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.png]]

943

944

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image033.png]]

=== 6.4.6 Heating ===

950

951

952

WSS-04 supports auto-heat feature. When the temperature is below the heat start temperature 15℃, WSS-04 starts to heat and stop at stop temperature (default is 25℃).

== 6.5 Temperature, Humidity, Illuminance, Pressure ~-~- WSS-05 ==

959

960

WSS-05 is a 4 in 1 RS485 sensor which can monitor Temperature, Humidity, Illuminance and Pressure at the same time.

961

962

963

WSS-05 is designed to support the Dragino Weather station solution.

964

965

Users only need to connect WSS-05 RS485 interface to WSC1-L. The weather station main

966

967

processor WSC1-L can detect and upload environment Temperature, Humidity, Illuminance, Pressure to the IoT Server via wireless LoRaWAN protocol.

968

969

970

=== 6.5.1 Feature ===

971

972

* RS485 Temperature, Humidity, Illuminance, Pressure sensor

=== 6.5.2 Specification ===

977

978

* Input Power: DC 12 ~~ 24v

979

* Interface: RS485

980

* Temperature Sensor Spec:

** Range: -30 ~~ 70℃

** resolution 0.1℃

** Accuracy: ±0.5℃

* Humidity Sensor Spec:

985

** Range: 0 ~~ 100% RH

986

** resolution 0.1 %RH

987

** Accuracy: 3% RH

988

* Pressure Sensor Spec:

989

** Range: 10～1100hPa

990

** Resolution: 0.1hPa

991

** Accuracy: ±0.1hPa

992

* Illuminate sensor:

993

** Range: 0～2/20/200kLux

994

** Resolution: 10 Lux

995

** Accuracy: ±3％FS

996

* Working Temperature: -30℃～70℃

997

* Working Humidity: 10～90%RH

998

* Power Consumption: 4mA @ 12v

=== 6.5.3 Dimension ===

1003

1004

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image034.jpg]]

1005

1006

1007

=== 6.5.4 Pin Mapping ===

1008

1009

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

1010

1011

1012

=== 6.5.5 Installation Notice ===

1013

1014

Do not power on while connect the cables. Double check the wiring before power on.

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image035.png]]

1019

1020

1021

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]

1022

1023

1024

== 6.6 Total Solar Radiation sensor ~-~- WSS-06 ==

1025

1026

WSS-06 is Total Radiation Sensor can be used to measure the total solar radiation in the spectral range of 0.3 to 3 μm (300 to 3000 nm). If the sensor face is down, the reflected radiation can be measured, and the shading ring can also be used to measure the scattered radiation.

1027

1028

1029

The core device of the radiation sensor is a high-precision photosensitive element, which has good stability and high precision; at the same time, a precision-machined PTTE radiation cover is installed outside the sensing element, which effectively prevents environmental factors from affecting its performance

1030

1031

1032

WSS-06 is designed to support the Dragino Weather station solution.

1033

1034

1035

Users only need to connect WSS-06 RS485 interface to WSC1-L. The weather station main

1036

1037

processor WSC1-L can detect and upload Total Solar Radiation to the IoT Server via wireless LoRaWAN protocol.

=== 6.6.1 Feature ===

1042

1043

* RS485 Total Solar Radiation sensor

1044

* Measure Total Radiation between 0.3～3μm（300～3000nm）

1045

* Measure Reflected Radiation if sense area towards ground.

=== 6.6.2 Specification ===

1050

1051

* Input Power: DC 5 ~~ 24v

1052

* Interface: RS485

1053

* Detect spectrum: 0.3～3μm（300～3000nm）

1054

* Measure strength range: 0～2000W/m2

1055

* Resolution: 0.1W/m2

1056

* Accuracy: ±3%

1057

* Yearly Stability: ≤±2％

1058

* Cosine response: ≤7％ (@ Sun angle 10°)

1059

* Temperature Effect: ±2％（－10℃～40℃）

1060

* Working Temperature: -40℃～70℃

1061

* Working Humidity: 10～90%RH

1062

* Power Consumption: 4mA @ 12v

=== 6.6.3 Dimension ===

1067

1068

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]]

1069

1070

1071

=== 6.6.4 Pin Mapping ===

1072

1073

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

1074

1075

1076

=== 6.6.5 Installation Notice ===

1077

1078

Do not power on while connect the cables. Double check the wiring before power on.

1079

1080

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image037.png]]

1081

1082

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image038.png]]

1083

1084

1085

== 6.7 PAR (Photosynthetically Available Radiation) ~-~- WSS-07 ==

1086

1087

WSS-07 photosynthetically active radiation sensor is mainly used to measure the photosynthetically active radiation of natural light in the wavelength range of 400-700nm.

1088

1089

1090

WSS-07 use precision optical detectors and has an optical filter of 400-700nm, when natural light is irradiated, a voltage signal proportional to the intensity of the incident radiation is generated, and its luminous flux density is proportional to the cosine of the direct angle of the incident light.

WSS-07 is designed to support the Dragino Weather station solution.

1095

1096

1097

Users only need to connect WSS-07 RS485 interface to WSC1-L. The weather station main

1098

1099

processor WSC1-L can detect and upload Photosynthetically Available Radiation to the IoT Server via wireless LoRaWAN protocol.

1100

1101

1102

=== 6.7.1 Feature ===

1103

1104

PAR (Photosynthetically Available Radiation) sensor measure 400 ~~ 700nm wavelength nature light’s Photosynthetically Available Radiation.

1105

1106

1107

When nature light shine on the sense area, it will generate a signal base on the incidence radiation strength.

1108

1109

1110

=== 6.7.2 Specification ===

1111

1112

* Input Power: DC 5 ~~ 24v

1113

* Interface: RS485

1114

* Response Spectrum: 400～700nm

1115

* Measure range: 0～2500μmol/m2•s

1116

* Resolution: 1μmol/m2•s

1117

* Accuracy: ±2%

1118

* Yearly Stability: ≤±2％

1119

* Working Temperature: -30℃～75℃

1120

* Working Humidity: 10～90%RH

1121

* Power Consumption: 3mA @ 12v

=== 6.7.3 Dimension ===

1126

1127

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]]

1128

1129

1130

=== 6.7.4 Pin Mapping ===

1131

1132

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

1133

1134

1135

=== 6.7.5 Installation Notice ===

1136

1137

Do not power on while connect the cables. Double check the wiring before power on.

1138

1139

1140

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image037.png]]

1141

1142

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image038.png]]

= 7. FAQ =

== 7.1 What else do I need to purchase to build Weather Station? ==

1148

1149

Below is the installation photo and structure:

1150

1151

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.png]]

1152

1153

1154

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image039.png]]

== 7.2 How to upgrade firmware for WSC1-L? ==

1160

1161

Firmware Location & Change log:

1162

1163

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/WSC1-L/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/WSC1-L/]]

1164

1165

1166

Firmware Upgrade instruction:

1167

1168

[[https:~~/~~/wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Hardware_Upgrade_Method_Support_List>>url:https://wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Hardware_Upgrade_Method_Support_List]]

1169

1170

1171

== 7.3 How to change the LoRa Frequency Bands/Region? ==

1172

1173

User can follow the introduction for how to upgrade image. When download the images, choose the required image file for download.

== 7.4 Can I add my weather sensors? ==

1178

1179

Yes, connect the sensor to RS485 bus and see instruction: [[add sensors.>>path:#Add_sensor]]

1180

1181

1182

= 8. Trouble Shooting =

= 9. Order Info =

== 9.1 Main Process Unit ==

1193

1194

Part Number: (% style="color:blue" %)**WSC1-L-XX**

1195

1196

(% style="color:blue" %)**XX**(%%): The default frequency band

1197

1198

* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band

1199

* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band

1200

* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band

1201

* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band

1202

* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band

1203

* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band

1204

* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band

1205

* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band

== 9.2 Sensors ==

|**Sensor Model**|**Part Number**

1212

|**Rain Gauge**|WSS-01

1213

|**Rain Gauge installation Bracket for Pole**|WS-K2

1214

|**Wind Speed Direction 2 in 1 Sensor**|WSS-02

1215

|**CO2/PM2.5/PM10 3 in 1 Sensor**|WSS-03

1216

|**Rain/Snow Detect Sensor**|WSS-04

1217

|**Temperature, Humidity, illuminance and Pressure 4 in 1 sensor**|WSS-05

1218

|**Total Solar Radiation Sensor**|WSS-06

1219

|**PAR (Photosynthetically Available Radiation)**|WSS-07

= 10. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1224

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to

1225

1226

[[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]

= 11. Appendix I: Field Installation Photo =

1233

1234