Dragino LoRaWAN Weather Station User Manual

Dragino LoRaWAN weather station series products are designed for measuring atmospheric conditions to provide information for weather forecasts and to study the (% style="color:#4472c4" %)**weather and climate**(%%). They consist of a (% style="color:#4472c4" %)**main process device (WSC1-L) and various sensors**.

25

)))

26

27

(((

28

The sensors include various type such as: (% style="color:#4472c4" %)**Rain Gauge**, **Temperature/Humidity/Pressure sensor**, **Wind Speed/direction sensor**, **Illumination sensor**, **CO2 sensor**, **Rain/Snow sensor**,** PM2.5/10 sensor**, **PAR(Photosynthetically Available Radiation) sensor, Total Solar Radiation sensor**(%%) and so on.

)))

(((

Main process device WSC1-L is an outdoor LoRaWAN RS485 end node. It is powered by external (% style="color:#4472c4" %)**12v solar power**(%%) and have a (% style="color:#4472c4" %)**built-in li-on backup battery**(%%). WSC1-L reads value from various sensors and upload these sensor data to IoT server via LoRaWAN wireless protocol.

)))

(((

WSC1-L is full compatible with(% style="color:#4472c4" %)** LoRaWAN Class C protocol**(%%), it can work with standard LoRaWAN gateway.

)))

= 2. How to use =

== 2.1 Installation ==

44

45

Below is an installation example for the weather station. Field installation example can be found at [[Appendix I: Field Installation Photo.>>||anchor="H11.AppendixI:FieldInstallationPhoto"]]

46

47

[[image:1656041948552-849.png]]

48

49

50

(% style="color:blue" %)** Wiring:**

51

52

~1. WSC1-L and sensors all powered by solar power via MPPT

53

54

2. WSC1-L and sensors connect to each other via RS485/Modbus.

55

56

3. WSC1-L read value from each sensor and send uplink via LoRaWAN

57

58

59

WSC1-L is shipped with a RS485 converter board, for the easy connection to different sensors and WSC1-L. Below is a connection photo:

60

61

[[image:1656042136605-251.png]]

62

63

64

(% style="color:red" %) ** Notice 1:**

65

66

* All weather sensors and WSC1-L are powered by MPPT solar recharge controller. MPPT is connected to solar panel and storage battery.

67

* WSC1-L has an extra 1000mAh back up battery. So it can work even solar panel and storage battery Fails.

68

* Weather sensors won’t work if solar panel and storage battery fails.

69

70

(% style="color:red" %)** Notice 2:**

71

72

Due to shipment and importation limitation, user is better to purchase below parts locally:

* Solar Panel

* Storage Battery

* MPPT Solar Recharger

77

* Mounting Kit includes pole and mast assembly. Each weather sensor has it’s own mounting assembly, user can check the sensor section in this manual.

78

* Cabinet.

79

80

== 2.2 How it works? ==

81

82

(((

83

Each WSC1-L is shipped with a worldwide unique set of OTAA keys. To use WSC1-L in a LoRaWAN network, user needs to input the OTAA keys in LoRaWAN network server. After finish installation as above. Create WSC1-L in your LoRaWAN server and Power on WSC1-L , it can join the LoRaWAN network and start to transmit sensor data. The default period for each uplink is 20 minutes.

)))

Open WSC1-L and put the yellow jumper as below position to power on WSC1-L.

88

89

[[image:1656042192857-709.png]]

90

91

92

(% style="color:red" %)**Notice:**

93

94

1. WSC1-L will auto scan available weather sensors when power on or reboot.

95

1. User can send a downlink command to WSC1-L to do a re-scan on the available sensors.

96

97

== 2.3 Example to use for LoRaWAN network ==

98

99

This section shows an example for how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.

100

101

102

[[image:1656042612899-422.png]]

Assume the DLOS8 is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. We need to add the WSC1-L device in TTN V3:

107

108

109

(% style="color:blue" %)**Step 1**(%%): Create a device in TTN V3 with the OTAA keys from WSC1-L.

110

111

Each WSC1-L is shipped with a sticker with the default device EUI as below:

112

113

[[image:image-20220624115043-1.jpeg]]

114

115

116

User can enter these keys in the LoRaWAN Server portal. Below is TTN V3 screen shot:

117

118

**Add APP EUI in the application.**

119

120

[[image:1656042662694-311.png]]

121

122

[[image:1656042673910-429.png]]

**Choose Manually to add WSC1-L**

128

129

[[image:1656042695755-103.png]]

**Add APP KEY and DEV EUI**

134

135

[[image:1656042723199-746.png]]

(% style="color:blue" %)**Step 2**(%%): Power on WSC1-L, it will start to join TTN server. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.

140

141

142

[[image:1656042745346-283.png]]

== 2.4 Uplink Payload ==

147

148

Uplink payloads include two types: Valid Sensor Value and other status / control command.

149

150

* Valid Sensor Value: Use FPORT=2

151

* Other control command: Use FPORT other than 2.

=== 2.4.1 Uplink FPORT~=5, Device Status ===

156

157

Uplink the device configures with FPORT=5. Once WSC1-L Joined the network, it will uplink this message to the server. After first uplink, WSC1-L will uplink Device Status every 12 hours

(((

User can also use downlink command(0x2301) to ask WSC1-L to resend this uplink

162

)))

163

164

(% border="1" cellspacing="8" style="background-color:#ffffcc; color:green; width:500px" %)

165

166

|(% style="width:99px" %)**Value**|(% style="width:112px" %)[[Sensor Model>>||anchor="HSensorModel:"]]|(% style="width:135px" %)[[Firmware Version>>||anchor="HFirmwareVersion:"]]|(% style="width:126px" %)[[Frequency Band>>||anchor="HFrequencyBand:"]]|(% style="width:85px" %)[[Sub-band>>||anchor="HSub-Band:"]]|(% style="width:46px" %)[[BAT>>||anchor="HBAT:"]]|(% style="width:166px" %)[[Weather Sensor Types>>||anchor="HWeatherSensorTypes:"]]

167

168

[[image:1656043061044-343.png]]

169

170

171

Example Payload (FPort=5): [[image:image-20220624101005-1.png]]

==== (% style="color:#037691" %)**Sensor Model:**(%%) ====

176

177

For WSC1-L, this value is 0x0D.

==== (% style="color:#037691" %)**Firmware Version:**(%%) ====

182

183

0x0100, Means: v1.0.0 version.

==== (% style="color:#037691" %)**Frequency Band:**(%%) ====

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0x0a: AS923-3

==== (% style="color:#037691" %)**Sub-Band:**(%%) ====

212

213

value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)

==== (% style="color:#037691" %)**BAT:**(%%) ====

218

219

shows the battery voltage for WSC1-L MCU.

220

221

Ex1: 0x0BD6/1000 = 3.03 V

==== (% style="color:#037691" %)**Weather Sensor Types:**(%%) ====

226

227

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:100px" %)

228

|Byte3|Byte2|Byte1

229

230

Bit = 1 means this sensor is connected, Bit=0 means this sensor is not connected

231

232

[[image:image-20220624134713-1.png]]

233

234

235

Eg: 0x1000FE = 1 0000 0000 0000 1111 1110(b)

236

237

External sensors detected by WSC1-L include :

custom sensor A1,

PAR sensor (WSS-07),

Total Solar Radiation sensor (WSS-06),

244

245

CO2/PM2.5/PM10 (WSS-03),

246

247

Wind Speed/Direction (WSS-02)

248

249

250

User can also use downlink command(0x26 01) to ask WSC1-L to resend this uplink :

251

252

(% style="color:#037691" %)**Downlink:0x26 01**

253

254

[[image:1656049673488-415.png]]

=== 2.4.2 Uplink FPORT~=2, Real time sensor value ===

259

260

(((

261

WSC1-L will send this uplink after Device Config uplink once join LoRaWAN network successfully. And it will periodically send this uplink. Default interval is 20 minutes and [[can be changed>>||anchor="H3.1SetTransmitIntervalTime"]].

)))

(((

Uplink uses FPORT=2 and every 20 minutes send one uplink by default.

)))

(((

The upload length is dynamic, depends on what type of weather sensors are connected. The uplink payload is combined with sensor segments. As below:

)))

(% style="color:#4472c4" %)** Uplink Payload**:

275

276

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:464px" %)

277

|(% style="width:140px" %)Sensor Segment 1|(% style="width:139px" %)Sensor Segment 2|(% style="width:42px" %)……|(% style="width:140px" %)Sensor Segment n

278

279

(% style="color:#4472c4" %)** Sensor Segment Define**:

280

281

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:330px" %)

282

|(% style="width:89px" %)Type Code|(% style="width:114px" %)Length (Bytes)|(% style="width:124px" %)Measured Value

283

284

(% style="color:#4472c4" %)**Sensor Type Table:**

285

286

[[image:image-20220624140352-2.png]]

287

288

289

Below is an example payload: [[image:image-20220624140615-3.png]]

290

291

292

When sending this payload to LoRaWAN server. WSC1-L will send this in one uplink or several uplinks according to LoRaWAN spec requirement. For example, total length of Payload is 54 bytes.

293

294

* When WSC1-L sending in US915 frequency DR0 data rate. Because this data rate has limitation of 11 bytes payload for each uplink. The payload will be split into below packets and uplink.

295

296

Uplink 1: [[image:image-20220624140735-4.png]]

297

298

Uplink 2: [[image:image-20220624140842-5.png]]

299

300

301

* When WSC1-L sending in EU868 frequency DR0 data rate. The payload will be split into below packets and uplink:

302

303

Uplink 1: [[image:image-20220624141025-6.png]]

304

305

Uplink 2: [[image:image-20220624141100-7.png]]

=== 2.4.3 Decoder in TTN V3 ===

311

312

In LoRaWAN platform, user only see HEX payload by default, user needs to use payload formatters to decode the payload to see human-readable value.

313

314

315

Download decoder for suitable platform from:

316

317

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/WSC1-L/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/WSC1-L/]]

and put as below:

[[image:1656051152438-578.png]]

== 2.5 Show data on Application Server ==

326

327

Application platform provides a human friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:

328

329

330

(% style="color:blue" %)**Step 1**(%%): Be sure that your device is programmed and properly connected to the LoRaWAN network.

331

332

(% style="color:blue" %)**Step 2**(%%): Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.

333

334

[[image:1656051197172-131.png]]

**Add TagoIO:**

[[image:1656051223585-631.png]]

**Authorization:**

[[image:1656051248318-368.png]]

345

346

347

In TagoIO console ([[https:~~/~~/admin.tago.io~~/~~/>>url:https://datacake.co/]]) , add WSC1-L:

348

349

[[image:1656051277767-168.png]]

= 3. Configure WSC1-L via AT Command or LoRaWAN Downlink =

354

355

Use can configure WSC1-L via AT Command or LoRaWAN Downlink.

356

357

* AT Command Connection: See [[FAQ>>||anchor="H7.FAQ"]].

358

* LoRaWAN Downlink instruction for different platforms: [[Use Note for Server>>doc:Main.WebHome]](IoT LoRaWAN Server)

359

360

There are two kinds of commands to configure WSC1-L, they are:

361

362

* (% style="color:#4472c4" %)**General Commands**.

363

364

These commands are to configure:

365

366

* General system settings like: uplink interval.

367

* LoRaWAN protocol & radio related command.

368

369

They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack((% style="color:red" %)Note~*~*)(%%). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]

370

371

(% style="color:red" %)Note~*~*: Please check early user manual if you don’t have v1.8.0 firmware.

372

373

374

* (% style="color:#4472c4" %)**Commands special design for WSC1-L**

375

376

These commands only valid for WSC1-L, as below:

377

378

379

== 3.1 Set Transmit Interval Time ==

380

381

Feature: Change LoRaWAN End Node Transmit Interval.

382

383

(% style="color:#037691" %)**AT Command: AT+TDC**

384

385

[[image:image-20220624142619-8.png]]

386

387

388

(% style="color:#037691" %)**Downlink Command: 0x01**

389

390

Format: Command Code (0x01) followed by 3 bytes time value.

391

392

If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.

393

394

* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds

395

* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds

396

397

== 3.2 Set Emergency Mode ==

398

399

Feature: In emergency mode, WSC1-L will uplink data every 1 minute.

400

401

(% style="color:#037691" %)**AT Command:**

402

403

[[image:image-20220624142956-9.png]]

404

405

406

(% style="color:#037691" %)**Downlink Command:**

407

408

* 0xE101 Same as: AT+ALARMMOD=1

409

* 0xE100 Same as: AT+ALARMMOD=0

410

411

== 3.3 Add or Delete RS485 Sensor ==

412

413

Feature: User can add or delete 3^^rd^^ party sensor as long they are RS485/Modbus interface,baud rate support 9600.Maximum can add 4 sensors.

414

415

(% style="color:#037691" %)**AT Command: **

416

417

(% style="color:blue" %)**AT+DYSENSOR=Type_Code, Query_Length, Query_Command , Read_Length , Valid_Data ,has_CRC,timeout**

418

419

* Type_Code range: A1 ~~ A4

420

* Query_Length: RS485 Query frame length, Value cannot be greater than 10

421

* Query_Command: RS485 Query frame data to be sent to sensor, cannot be larger than 10 bytes

422

* Read_Length: RS485 response frame length supposed to receive. Max can receive

423

* Valid_Data: valid data from RS485 Response, Valid Data will be added to Payload and upload via LoRaWAN.

424

* has_CRC: RS485 Response crc check (0: no verification required 1: verification required). If CRC=1 and CRC error, valid data will be set to 0.

425

* timeout: RS485 receive timeout (uint:ms). Device will close receive window after timeout

**Example:**

User need to change external sensor use the type code as address code.

430

431

With a 485 sensor, after correctly changing the address code to A1, the RS485 query frame is shown in the following table:

432

433

[[image:image-20220624143553-10.png]]

434

435

436

The response frame of the sensor is as follows:

437

438

[[image:image-20220624143618-11.png]]

439

440

441

**Then the following parameters should be:**

442

443

* Address_Code range: A1

444

* Query_Length: 8

445

* Query_Command: A103000000019CAA

446

* Read_Length: 8

447

* Valid_Data: 24 (Indicates that the data length is 2 bytes, starting from the 4th byte)

448

* has_CRC: 1

449

* timeout: 1500 (Fill in the test according to the actual situation)

450

451

**So the input command is:**

452

453

AT+DYSENSOR=A1,8,A103000000019CAA,8,24,1,1500

454

455

456

In every sampling. WSC1-L will auto append the sensor segment as per this structure and uplink.

457

458

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:351px" %)

459

|=(% style="width: 94px;" %)Type Code|=(% style="width: 121px;" %)Length (Bytes)|=(% style="width: 132px;" %)Measured Value

460

|(% style="width:94px" %)A1|(% style="width:121px" %)2|(% style="width:132px" %)0x000A

461

462

**Related commands:**

463

464

AT+DYSENSOR=A1,0 ~-~-> Delete 3^^rd^^ party sensor A1.

465

466

AT+DYSENSOR ~-~-> List All 3^^rd^^ Party Sensor. Like below:

467

468

469

(% style="color:#037691" %)**Downlink Command: **

470

471

**delete custom sensor A1:**

472

473

* 0xE5A1 Same as: AT+DYSENSOR=A1,0

474

475

**Remove all custom sensors**

* 0xE5FF

== 3.4 RS485 Test Command ==

480

481

(% style="color:#037691" %)**AT Command:**

482

483

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:474px" %)

484

|=(% style="width: 159px;" %)**Command Example**|=(% style="width: 227px;" %)**Function**|=(% style="width: 85px;" %)**Response**

485

|(% style="width:159px" %)AT+RSWRITE=xxxxxx|(% style="width:227px" %)(((

486

Send command to 485 sensor

487

488

Range : no more than 10 bytes

489

)))|(% style="width:85px" %)OK

490

491

Eg: Send command **01 03 00 00 00 01 84 0A** to 485 sensor

492

493

AT+RSWRITE=0103000001840A

494

495

496

(% style="color:#037691" %)**Downlink Command:**

497

498

* 0xE20103000001840A Same as: AT+RSWRITE=0103000001840A

499

500

== 3.5 RS485 response timeout ==

501

502

Feature: Set or get extended time to receive 485 sensor data.

503

504

(% style="color:#037691" %)**AT Command:**

505

506

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:433px" %)

507

|=(% style="width: 157px;" %)**Command Example**|=(% style="width: 188px;" %)**Function**|=(% style="width: 85px;" %)**Response**

508

|(% style="width:157px" %)AT+DTR=1000|(% style="width:188px" %)(((

509

Set response timeout to:

510

511

Range : 0~~10000

512

)))|(% style="width:85px" %)OK

513

514

(% style="color:#037691" %)**Downlink Command:**

515

516

Format: Command Code (0xE0) followed by 3 bytes time value.

517

518

If the downlink payload=E0000005, it means set the END Node’s Transmit Interval to 0x000005=5(S), while type code is E0.

519

520

* Example 1: Downlink Payload: E0000005 ~/~/ Set Transmit Interval (DTR) = 5 seconds

521

* Example 2: Downlink Payload: E000000A ~/~/ Set Transmit Interval (DTR) = 10 seconds

522

523

== 3.6 Set Sensor Type ==

524

525

Feature: Set sensor in used. If there are 6 sensors, user can set to only send 5 sensors values.

526

527

See [[definition>>||anchor="HWeatherSensorTypes:"]] for the sensor type.

528

529

[[image:image-20220624144904-12.png]]

530

531

532

(% style="color:#037691" %)**AT Command:**

533

534

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:377px" %)

535

|=(% style="width: 157px;" %)**Command Example**|=(% style="width: 130px;" %)**Function**|=(% style="width: 87px;" %)**Response**

536

|(% style="width:157px" %)AT+STYPE=80221|(% style="width:130px" %)Set sensor types|(% style="width:87px" %)OK

537

538

Eg: The setting command **AT+STYPE=802212** means:

539

540

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:495px" %)

So wsc1-L will upload the following data: Custom Sensor A1, Rain Gauge,CO2,BAT.

549

550

551

(% style="color:#037691" %)**Downlink Command:**

552

553

* 0xE400802212 Same as: AT+STYPE=80221

554

555

(% style="color:red" %)**Note:**

556

557

~1. The sensor type will not be saved to flash, and the value will be updated every time the sensor is restarted or rescanned.

= 4. Power consumption and battery =

563

564

== 4.1 Total Power Consumption ==

565

566

Dragino Weather Station serial products include the main process unit ( WSC1-L ) and various sensors. The total power consumption equal total power of all above units. The power consumption for main process unit WSC1-L is 18ma @ 12v. and the power consumption of each sensor can be found on the Sensors chapter.

567

568

569

== 4.2 Reduce power consumption ==

570

571

The main process unit WSC1-L is set to LoRaWAN Class C by default. If user want to reduce the power consumption of this unit, user can set it to run in Class A. In Class A mode, WSC1-L will not be to get real-time downlink command from IoT Server.

== 4.3 Battery ==

(((

All sensors are only power by external power source. If external power source is off. All sensor won't work.

)))

(((

Main Process Unit WSC1-L is powered by both external power source and internal 1000mAh rechargeable battery. If external power source is off, WSC1-L still runs and can send periodically uplinks, but the sensors value will become invalid. External power source can recharge the 1000mAh rechargeable battery.

)))

= 5. Main Process Unit WSC1-L =

== 5.1 Features ==

* Wall Attachable.

* LoRaWAN v1.0.3 Class A protocol.

591

* RS485 / Modbus protocol

592

* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915

593

* AT Commands to change parameters

594

* Remote configure parameters via LoRaWAN Downlink

595

* Firmware upgradable via program port

596

* Powered by external 12v battery

597

* Back up rechargeable 1000mAh battery

598

* IP Rating: IP65

599

* Support default sensors or 3rd party RS485 sensors

600

601

== 5.2 Power Consumption ==

602

603

WSC1-L (without external sensor): Idle: 4mA, Transmit: max 40mA

604

605

606

== 5.3 Storage & Operation Temperature ==

-20°C to +60°C

== 5.4 Pin Mapping ==

612

613

[[image:1656054149793-239.png]]

== 5.5 Mechanical ==

Refer LSn50v2 enclosure drawing in: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Mechanical_Drawing/>>url:https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Mechanical_Drawing/]]

619

620

621

== 5.6 Connect to RS485 Sensors ==

622

623

WSC1-L includes a RS485 converter PCB. Which help it easy to connect multiply RS485 sensors. Below is the photo for reference.

624

625

626

[[image:1656054389031-379.png]]

627

628

629

Hardware Design for the Converter Board please see:

630

631

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/RS485_Converter_Board/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/RS485_Converter_Board/]]

632

633

634

= 6. Weather Sensors =

635

636

== 6.1 Rain Gauge ~-~- WSS-01 ==

(((

WSS-01 RS485 Rain Gauge is used in meteorology and hydrology to gather and measure the amount of liquid precipitation (mainly rainfall) over an area.

)))

(((

WSS-01 uses a tipping bucket to detect rainfall. The tipping bucket use 3D streamline shape to make sure it works smoothly and is easy to clean.

)))

(((

WSS-01 is designed to support the Dragino Weather station solution. Users only need to connect WSS-01 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload the rainfall to the IoT Server via wireless LoRaWAN protocol

)))

(((

The tipping bucket of WSS-01 is adjusted to the best angle. When installation, user only needs to screw up and adjust the bottom horizontally.

)))

(((

WSS-01 package includes screw which can be installed to ground. If user want to install WSS-01 on pole, they can purchase WS-K2 bracket kit.

)))

=== 6.1.1 Feature ===

661

662

* RS485 Rain Gauge

663

* Small dimension, easy to install

664

* Vents under funnel, avoid leaf or other things to avoid rain flow.

665

* ABS enclosure.

666

* Horizontal adjustable.

=== 6.1.2 Specification ===

* Resolution: 0.2mm

* Accuracy: ±3%

* Rainfall strength: 0mm～4mm/min (max 8mm/min)

676

* Input Power: DC 5~~24v

677

* Interface: RS485

678

* Working Temperature: 0℃～70℃ ( incorrect below 0 degree, because water become ICE)

679

* Working Humidity: <100% (no dewing)

680

* Power Consumption: 4mA @ 12v.

=== 6.1.3 Dimension ===

686

687

[[image:1656054957406-980.png]]

688

689

690

=== 6.1.4 Pin Mapping ===

691

692

[[image:1656054972828-692.png]]

693

694

695

=== 6.1.5 Installation Notice ===

696

697

Do not power on while connect the cables. Double check the wiring before power on.

698

699

Installation Photo as reference:

700

701

702

(% style="color:#4472c4" %)** Install on Ground:**

703

704

WSS-01 Rain Gauge include screws so can install in ground directly .

705

706

707

(% style="color:#4472c4" %)** Install on pole:**

708

709

If user want to install on pole, they can purchase the (% style="color:#4472c4" %)** WS-K2 : Bracket Kit for Pole installation**(%%), and install as below:

710

711

[[image:image-20220624152218-1.png||height="526" width="276"]]

712

713

WS-K2: Bracket Kit for Pole installation

WSSC-K2 dimension document, please see:

718

719

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/]]

720

721

722

== 6.2 Wind Speed/Direction ~-~- WSS-02 ==

723

724

[[image:1656055444035-179.png]]

725

726

(((

727

WSS-02 is a RS485 wind speed and wind direction monitor designed for weather station solution.

)))

(((

WSS-02 shell is made of polycarbonate composite material, which has good anti-corrosion and anti-corrosion characteristics, and ensure the long-term use of the sensor without rust. At the same time, it cooperates with the internal smooth bearing system to ensure the stability of information collection

)))

(((

Users only need to connect WSS-02 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload the wind speed and direction to the IoT Server via wireless LoRaWAN protocol.

)))

=== 6.2.1 Feature ===

740

741

* RS485 wind speed / direction sensor

742

* PC enclosure, resist corrosion

=== 6.2.2 Specification ===

748

749

* Wind speed range: 0 ~~ 30m/s, (always show 30m/s for higher speed)

750

* Wind direction range: 0 ~~ 360°

751

* Start wind speed: ≤0.3m/s

752

* Accuracy: ±（0.3＋0.03V）m/s , ±1°

753

* Input Power: DC 5~~24v

754

* Interface: RS485

755

* Working Temperature: -30℃～70℃

756

* Working Humidity: <100% (no dewing)

757

* Power Consumption: 13mA ~~ 12v.

758

* Cable Length: 2 meters

=== 6.2.3 Dimension ===

=== 6.2.4 Pin Mapping ===

768

769

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

770

771

772

=== 6.2.4 Angle Mapping ===

773

774

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]

775

776

777

=== 6.2.5 Installation Notice ===

778

779

Do not power on while connect the cables. Double check the wiring before power on.

780

781

782

The sensor must be installed with below direction, towards North.

|(((

North

)))

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image027.png]]

== 6.3 CO2/PM2.5/PM10 ~-~- WSS-03 ==

799

800

WSS-03 is a RS485 Air Quality sensor. It can monitor CO2, PM2.5 and PM10 at the same time.

801

802

803

WSS-03 uses weather proof shield which can make sure the sensors are well protected against UV & radiation.

804

805

806

WSS-03 is designed to support the Dragino Weather station solution.

807

808

Users only need to connect WSS-03 RS485 interface to WSC1-L. The weather station main

809

810

processor WSC1-L can detect and upload the environment CO2, PM2.5 and PM10 to the IoT Server via wireless LoRaWAN protocol.

811

812

813

=== 6.3.1 Feature ===

814

815

* RS485 CO2, PM2.5, PM10 sensor

816

* NDIR to measure CO2 with Internal Temperature Compensation

817

* Laser Beam Scattering to PM2.5 and PM10

=== 6.3.2 Specification ===

823

824

* CO2 Range: 0～5000ppm, accuracy: ±3%F•S（25℃）

825

* CO2 resolution: 1ppm

826

* PM2.5/PM10 Range: 0～1000μg/m3 , accuracy ±3%F•S（25℃）

827

* PM2.5/PM10 resolution: 1μg/m3

828

* Input Power: DC 7 ~~ 24v

829

* Preheat time: 3min

830

* Interface: RS485

831

* Working Temperature:

832

** CO2: 0℃～50℃;

833

** PM2.5/PM10: -30 ~~ 50℃

834

* Working Humidity:

835

** PM2.5/PM10: 15～80%RH (no dewing)

836

** CO2: 0～95%RH

837

* Power Consumption: 50mA@ 12v.

=== 6.3.3 Dimension ===

843

844

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]

845

846

847

=== 6.3.4 Pin Mapping ===

848

849

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

850

851

852

=== 6.3.5 Installation Notice ===

853

854

Do not power on while connect the cables. Double check the wiring before power on.

855

856

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image029.png]]

857

858

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]

== 6.4 Rain/Snow Detect ~-~- WSS-04 ==

866

867

WSS-04 is a RS485 rain / snow detect sensor. It can monitor Rain or Snow event.

868

869

870

WSS-04 has auto heating feature, this ensures measurement more reliable.

871

872

873

WSS-04 is designed to support the Dragino Weather station solution.

874

875

Users only need to connect WSS-04 RS485 interface to WSC1-L. The weather station main

876

877

processor WSC1-L can detect and upload the SNOW/Rain Event to the IoT Server via wireless LoRaWAN protocol.

=== 6.4.1 Feature ===

882

883

* RS485 Rain/Snow detect sensor

884

* Surface heating to dry

885

* grid electrode uses Electroless Nickel/Immersion Gold design for resist corrosion

=== 6.4.2 Specification ===

891

892

* Detect if there is rain or snow

893

* Input Power: DC 12 ~~ 24v

894

* Interface: RS485

895

* Working Temperature: -30℃～70℃

896

* Working Humidity: 10～90%RH

897

* Power Consumption:

898

** No heating: 12mA @ 12v,

899

** heating: 94ma @ 12v.

=== 6.4.3 Dimension ===

905

906

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]

907

908

909

=== 6.4.4 Pin Mapping ===

910

911

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

912

913

914

=== 6.4.5 Installation Notice ===

915

916

Do not power on while connect the cables. Double check the wiring before power on.

917

918

919

Install with 15°degree.

920

921

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.png]]

922

923

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image033.png]]

=== 6.4.6 Heating ===

929

930

931

WSS-04 supports auto-heat feature. When the temperature is below the heat start temperature 15℃, WSS-04 starts to heat and stop at stop temperature (default is 25℃).

== 6.5 Temperature, Humidity, Illuminance, Pressure ~-~- WSS-05 ==

938

939

WSS-05 is a 4 in 1 RS485 sensor which can monitor Temperature, Humidity, Illuminance and Pressure at the same time.

940

941

942

WSS-05 is designed to support the Dragino Weather station solution.

943

944

Users only need to connect WSS-05 RS485 interface to WSC1-L. The weather station main

945

946

processor WSC1-L can detect and upload environment Temperature, Humidity, Illuminance, Pressure to the IoT Server via wireless LoRaWAN protocol.

947

948

949

=== 6.5.1 Feature ===

950

951

* RS485 Temperature, Humidity, Illuminance, Pressure sensor

=== 6.5.2 Specification ===

957

958

* Input Power: DC 12 ~~ 24v

959

* Interface: RS485

960

* Temperature Sensor Spec:

** Range: -30 ~~ 70℃

** resolution 0.1℃

** Accuracy: ±0.5℃

* Humidity Sensor Spec:

965

** Range: 0 ~~ 100% RH

966

** resolution 0.1 %RH

967

** Accuracy: 3% RH

968

* Pressure Sensor Spec:

969

** Range: 10～1100hPa

970

** Resolution: 0.1hPa

971

** Accuracy: ±0.1hPa

972

* Illuminate sensor:

973

** Range: 0～2/20/200kLux

974

** Resolution: 10 Lux

975

** Accuracy: ±3％FS

976

* Working Temperature: -30℃～70℃

977

* Working Humidity: 10～90%RH

978

* Power Consumption: 4mA @ 12v

=== 6.5.3 Dimension ===

984

985

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image034.jpg]]

986

987

988

=== 6.5.4 Pin Mapping ===

989

990

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

991

992

993

=== 6.5.5 Installation Notice ===

994

995

Do not power on while connect the cables. Double check the wiring before power on.

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image035.png]]

1000

1001

1002

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]

1003

1004

1005

== 6.6 Total Solar Radiation sensor ~-~- WSS-06 ==

1006

1007

WSS-06 is Total Radiation Sensor can be used to measure the total solar radiation in the spectral range of 0.3 to 3 μm (300 to 3000 nm). If the sensor face is down, the reflected radiation can be measured, and the shading ring can also be used to measure the scattered radiation.

1008

1009

1010

The core device of the radiation sensor is a high-precision photosensitive element, which has good stability and high precision; at the same time, a precision-machined PTTE radiation cover is installed outside the sensing element, which effectively prevents environmental factors from affecting its performance

1011

1012

1013

WSS-06 is designed to support the Dragino Weather station solution.

1014

1015

1016

Users only need to connect WSS-06 RS485 interface to WSC1-L. The weather station main

1017

1018

processor WSC1-L can detect and upload Total Solar Radiation to the IoT Server via wireless LoRaWAN protocol.

=== 6.6.1 Feature ===

1023

1024

* RS485 Total Solar Radiation sensor

1025

* Measure Total Radiation between 0.3～3μm（300～3000nm）

1026

* Measure Reflected Radiation if sense area towards ground.

=== 6.6.2 Specification ===

1032

1033

* Input Power: DC 5 ~~ 24v

1034

* Interface: RS485

1035

* Detect spectrum: 0.3～3μm（300～3000nm）

1036

* Measure strength range: 0～2000W/m2

1037

* Resolution: 0.1W/m2

1038

* Accuracy: ±3%

1039

* Yearly Stability: ≤±2％

1040

* Cosine response: ≤7％ (@ Sun angle 10°)

1041

* Temperature Effect: ±2％（－10℃～40℃）

1042

* Working Temperature: -40℃～70℃

1043

* Working Humidity: 10～90%RH

1044

* Power Consumption: 4mA @ 12v

=== 6.6.3 Dimension ===

1050

1051

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]]

1052

1053

1054

=== 6.6.4 Pin Mapping ===

1055

1056

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

1057

1058

1059

=== 6.6.5 Installation Notice ===

1060

1061

Do not power on while connect the cables. Double check the wiring before power on.

1062

1063

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image037.png]]

1064

1065

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image038.png]]

1066

1067

1068

== 6.7 PAR (Photosynthetically Available Radiation) ~-~- WSS-07 ==

1069

1070

WSS-07 photosynthetically active radiation sensor is mainly used to measure the photosynthetically active radiation of natural light in the wavelength range of 400-700nm.

1071

1072

1073

WSS-07 use precision optical detectors and has an optical filter of 400-700nm, when natural light is irradiated, a voltage signal proportional to the intensity of the incident radiation is generated, and its luminous flux density is proportional to the cosine of the direct angle of the incident light.

WSS-07 is designed to support the Dragino Weather station solution.

1078

1079

1080

Users only need to connect WSS-07 RS485 interface to WSC1-L. The weather station main

1081

1082

processor WSC1-L can detect and upload Photosynthetically Available Radiation to the IoT Server via wireless LoRaWAN protocol.

1083

1084

1085

=== 6.7.1 Feature ===

1086

1087

PAR (Photosynthetically Available Radiation) sensor measure 400 ~~ 700nm wavelength nature light’s Photosynthetically Available Radiation.

1088

1089

1090

When nature light shine on the sense area, it will generate a signal base on the incidence radiation strength.

1091

1092

1093

=== 6.7.2 Specification ===

1094

1095

* Input Power: DC 5 ~~ 24v

1096

* Interface: RS485

1097

* Response Spectrum: 400～700nm

1098

* Measure range: 0～2500μmol/m2•s

1099

* Resolution: 1μmol/m2•s

1100

* Accuracy: ±2%

1101

* Yearly Stability: ≤±2％

1102

* Working Temperature: -30℃～75℃

1103

* Working Humidity: 10～90%RH

1104

* Power Consumption: 3mA @ 12v

=== 6.7.3 Dimension ===

1110

1111

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]]

1112

1113

1114

=== 6.7.4 Pin Mapping ===

1115

1116

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

1117

1118

1119

=== 6.7.5 Installation Notice ===

1120

1121

Do not power on while connect the cables. Double check the wiring before power on.

1122

1123

1124

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image037.png]]

1125

1126

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image038.png]]

= 7. FAQ =

== 7.1 What else do I need to purchase to build Weather Station? ==

1132

1133

Below is the installation photo and structure:

1134

1135

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.png]]

1136

1137

1138

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image039.png]]

== 7.2 How to upgrade firmware for WSC1-L? ==

1144

1145

Firmware Location & Change log:

1146

1147

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/WSC1-L/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/WSC1-L/]]

1148

1149

1150

Firmware Upgrade instruction:

1151

1152

[[https:~~/~~/wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Hardware_Upgrade_Method_Support_List>>url:https://wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Hardware_Upgrade_Method_Support_List]]

1153

1154

1155

== 7.3 How to change the LoRa Frequency Bands/Region? ==

1156

1157

User can follow the introduction for how to upgrade image. When download the images, choose the required image file for download.

== 7.4 Can I add my weather sensors? ==

1162

1163

Yes, connect the sensor to RS485 bus and see instruction: [[add sensors.>>path:#Add_sensor]]

1164

1165

1166

= 8. Trouble Shooting =

= 9. Order Info =

== 9.1 Main Process Unit ==

1177

1178

Part Number: (% style="color:blue" %)**WSC1-L-XX**

1179

1180

(% style="color:blue" %)**XX**(%%): The default frequency band

1181

1182

* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band

1183

* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band

1184

* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band

1185

* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band

1186

* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band

1187

* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band

1188

* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band

1189

* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band

== 9.2 Sensors ==

|**Sensor Model**|**Part Number**

1197

|**Rain Gauge**|WSS-01

1198

|**Rain Gauge installation Bracket for Pole**|WS-K2

1199

|**Wind Speed Direction 2 in 1 Sensor**|WSS-02

1200

|**CO2/PM2.5/PM10 3 in 1 Sensor**|WSS-03

1201

|**Rain/Snow Detect Sensor**|WSS-04

1202

|**Temperature, Humidity, illuminance and Pressure 4 in 1 sensor**|WSS-05

1203

|**Total Solar Radiation Sensor**|WSS-06

1204

|**PAR (Photosynthetically Available Radiation)**|WSS-07

= 10. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1210

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to

1211

1212

[[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]

= 11. Appendix I: Field Installation Photo =

1219

1220