Dragino LoRaWAN Weather Station User Manual

Dragino LoRaWAN weather station series products are designed for measuring atmospheric conditions to provide information for weather forecasts and to study the (% style="color:#4472c4" %)**weather and climate**(%%). They consist of a (% style="color:#4472c4" %)**main process device (WSC1-L) and various sensors**.

25

)))

26

27

(((

28

The sensors include various type such as: (% style="color:#4472c4" %)**Rain Gauge**, **Temperature/Humidity/Pressure sensor**, **Wind Speed/direction sensor**, **Illumination sensor**, **CO2 sensor**, **Rain/Snow sensor**,** PM2.5/10 sensor**, **PAR(Photosynthetically Available Radiation) sensor, Total Solar Radiation sensor**(%%) and so on.

)))

(((

Main process device WSC1-L is an outdoor LoRaWAN RS485 end node. It is powered by external (% style="color:#4472c4" %)**12v solar power**(%%) and have a (% style="color:#4472c4" %)**built-in li-on backup battery**(%%). WSC1-L reads value from various sensors and upload these sensor data to IoT server via LoRaWAN wireless protocol.

)))

(((

WSC1-L is full compatible with(% style="color:#4472c4" %)** LoRaWAN Class C protocol**(%%), it can work with standard LoRaWAN gateway.

)))

= 2. How to use =

== 2.1 Installation ==

44

45

Below is an installation example for the weather station. Field installation example can be found at [[Appendix I: Field Installation Photo.>>||anchor="H11.AppendixI:FieldInstallationPhoto"]]

46

47

[[image:1656041948552-849.png]]

48

49

50

(% style="color:blue" %)** Wiring:**

51

52

~1. WSC1-L and sensors all powered by solar power via MPPT

53

54

2. WSC1-L and sensors connect to each other via RS485/Modbus.

55

56

3. WSC1-L read value from each sensor and send uplink via LoRaWAN

57

58

59

WSC1-L is shipped with a RS485 converter board, for the easy connection to different sensors and WSC1-L. Below is a connection photo:

60

61

[[image:1656042136605-251.png]]

62

63

64

(% style="color:red" %) ** Notice 1:**

65

66

* All weather sensors and WSC1-L are powered by MPPT solar recharge controller. MPPT is connected to solar panel and storage battery.

67

* WSC1-L has an extra 1000mAh back up battery. So it can work even solar panel and storage battery Fails.

68

* Weather sensors won’t work if solar panel and storage battery fails.

69

70

(% style="color:red" %)** Notice 2:**

71

72

Due to shipment and importation limitation, user is better to purchase below parts locally:

* Solar Panel

* Storage Battery

* MPPT Solar Recharger

77

* Mounting Kit includes pole and mast assembly. Each weather sensor has it’s own mounting assembly, user can check the sensor section in this manual.

* Cabinet.

== 2.2 How it works? ==

82

83

(((

84

Each WSC1-L is shipped with a worldwide unique set of OTAA keys. To use WSC1-L in a LoRaWAN network, user needs to input the OTAA keys in LoRaWAN network server. After finish installation as above. Create WSC1-L in your LoRaWAN server and Power on WSC1-L , it can join the LoRaWAN network and start to transmit sensor data. The default period for each uplink is 20 minutes.

)))

Open WSC1-L and put the yellow jumper as below position to power on WSC1-L.

89

90

[[image:1656042192857-709.png]]

91

92

93

(% style="color:red" %)**Notice:**

94

95

1. WSC1-L will auto scan available weather sensors when power on or reboot.

96

1. User can send a downlink command to WSC1-L to do a re-scan on the available sensors.

97

98

99

== 2.3 Example to use for LoRaWAN network ==

100

101

This section shows an example for how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.

102

103

104

[[image:1656042612899-422.png]]

Assume the DLOS8 is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. We need to add the WSC1-L device in TTN V3:

109

110

111

(% style="color:blue" %)**Step 1**(%%): Create a device in TTN V3 with the OTAA keys from WSC1-L.

112

113

Each WSC1-L is shipped with a sticker with the default device EUI as below:

114

115

[[image:image-20220624115043-1.jpeg]]

116

117

118

User can enter these keys in the LoRaWAN Server portal. Below is TTN V3 screen shot:

119

120

**Add APP EUI in the application.**

121

122

[[image:1656042662694-311.png]]

123

124

[[image:1656042673910-429.png]]

**Choose Manually to add WSC1-L**

130

131

[[image:1656042695755-103.png]]

**Add APP KEY and DEV EUI**

136

137

[[image:1656042723199-746.png]]

(% style="color:blue" %)**Step 2**(%%): Power on WSC1-L, it will start to join TTN server. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.

142

143

144

[[image:1656042745346-283.png]]

== 2.4 Uplink Payload ==

149

150

Uplink payloads include two types: Valid Sensor Value and other status / control command.

151

152

* Valid Sensor Value: Use FPORT=2

153

* Other control command: Use FPORT other than 2.

154

155

=== 2.4.1 Uplink FPORT~=5, Device Status ===

156

157

Uplink the device configures with FPORT=5. Once WSC1-L Joined the network, it will uplink this message to the server. After first uplink, WSC1-L will uplink Device Status every 12 hours

(((

User can also use downlink command(0x2301) to ask WSC1-L to resend this uplink

162

)))

163

164

(% border="1" cellspacing="8" style="background-color:#ffffcc; color:green; width:500px" %)

165

166

|(% style="width:99px" %)**Value**|(% style="width:112px" %)[[Sensor Model>>||anchor="HSensorModel:"]]|(% style="width:135px" %)[[Firmware Version>>||anchor="HFirmwareVersion:"]]|(% style="width:126px" %)[[Frequency Band>>||anchor="HFrequencyBand:"]]|(% style="width:85px" %)[[Sub-band>>||anchor="HSub-Band:"]]|(% style="width:46px" %)[[BAT>>||anchor="HBAT:"]]|(% style="width:166px" %)[[Weather Sensor Types>>||anchor="HWeatherSensorTypes:"]]

167

168

[[image:1656043061044-343.png]]

169

170

171

Example Payload (FPort=5): [[image:image-20220624101005-1.png]]

==== (% style="color:#037691" %)**Sensor Model:**(%%) ====

176

177

For WSC1-L, this value is 0x0D.

==== (% style="color:#037691" %)**Firmware Version:**(%%) ====

182

183

0x0100, Means: v1.0.0 version.

==== (% style="color:#037691" %)**Frequency Band:**(%%) ====

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0x0a: AS923-3

==== (% style="color:#037691" %)**Sub-Band:**(%%) ====

212

213

value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)

==== (% style="color:#037691" %)**BAT:**(%%) ====

218

219

shows the battery voltage for WSC1-L MCU.

220

221

Ex1: 0x0BD6/1000 = 3.03 V

==== (% style="color:#037691" %)**Weather Sensor Types:**(%%) ====

226

227

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:100px" %)

228

|Byte3|Byte2|Byte1

229

230

Bit = 1 means this sensor is connected, Bit=0 means this sensor is not connected

231

232

[[image:image-20220624134713-1.png]]

233

234

235

Eg: 0x1000FE = 1 0000 0000 0000 1111 1110(b)

236

237

External sensors detected by WSC1-L include :

custom sensor A1,

PAR sensor (WSS-07),

Total Solar Radiation sensor (WSS-06),

244

245

CO2/PM2.5/PM10 (WSS-03),

246

247

Wind Speed/Direction (WSS-02)

248

249

250

User can also use downlink command(0x26 01) to ask WSC1-L to resend this uplink :

251

252

(% style="color:#037691" %)**Downlink:0x26 01**

253

254

[[image:1656049673488-415.png]]

=== 2.4.2 Uplink FPORT~=2, Real time sensor value ===

259

260

(((

261

WSC1-L will send this uplink after Device Config uplink once join LoRaWAN network successfully. And it will periodically send this uplink. Default interval is 20 minutes and [[can be changed>>||anchor="H3.1SetTransmitIntervalTime"]].

)))

(((

Uplink uses FPORT=2 and every 20 minutes send one uplink by default.

)))

(((

The upload length is dynamic, depends on what type of weather sensors are connected. The uplink payload is combined with sensor segments. As below:

)))

(% style="color:#4472c4" %)** Uplink Payload**:

275

276

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:464px" %)

277

|(% style="width:140px" %)Sensor Segment 1|(% style="width:139px" %)Sensor Segment 2|(% style="width:42px" %)……|(% style="width:140px" %)Sensor Segment n

278

279

(% style="color:#4472c4" %)** Sensor Segment Define**:

280

281

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:330px" %)

282

|(% style="width:89px" %)Type Code|(% style="width:114px" %)Length (Bytes)|(% style="width:124px" %)Measured Value

283

284

(% style="color:#4472c4" %)**Sensor Type Table:**

285

286

[[image:image-20220624140352-2.png]]

287

288

289

Below is an example payload: [[image:image-20220624140615-3.png]]

290

291

292

When sending this payload to LoRaWAN server. WSC1-L will send this in one uplink or several uplinks according to LoRaWAN spec requirement. For example, total length of Payload is 54 bytes.

293

294

* When WSC1-L sending in US915 frequency DR0 data rate. Because this data rate has limitation of 11 bytes payload for each uplink. The payload will be split into below packets and uplink.

295

296

Uplink 1: [[image:image-20220624140735-4.png]]

297

298

Uplink 2: [[image:image-20220624140842-5.png]]

299

300

301

* When WSC1-L sending in EU868 frequency DR0 data rate. The payload will be split into below packets and uplink:

302

303

Uplink 1: [[image:image-20220624141025-6.png]]

304

305

Uplink 2: [[image:image-20220624141100-7.png]]

=== 2.4.3 Decoder in TTN V3 ===

311

312

In LoRaWAN platform, user only see HEX payload by default, user needs to use payload formatters to decode the payload to see human-readable value.

313

314

315

Download decoder for suitable platform from:

316

317

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/WSC1-L/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/WSC1-L/]]

and put as below:

[[image:1656051152438-578.png]]

== 2.5 Show data on Application Server ==

326

327

Application platform provides a human friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:

328

329

330

(% style="color:blue" %)**Step 1**(%%): Be sure that your device is programmed and properly connected to the LoRaWAN network.

331

332

(% style="color:blue" %)**Step 2**(%%): Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.

333

334

[[image:1656051197172-131.png]]

**Add TagoIO:**

[[image:1656051223585-631.png]]

**Authorization:**

[[image:1656051248318-368.png]]

345

346

347

In TagoIO console ([[https:~~/~~/admin.tago.io~~/~~/>>url:https://datacake.co/]]) , add WSC1-L:

348

349

[[image:1656051277767-168.png]]

= 3. Configure WSC1-L via AT Command or LoRaWAN Downlink =

354

355

Use can configure WSC1-L via AT Command or LoRaWAN Downlink.

356

357

* AT Command Connection: See [[FAQ>>||anchor="H7.FAQ"]].

358

* LoRaWAN Downlink instruction for different platforms: [[Use Note for Server>>doc:Main.WebHome]](IoT LoRaWAN Server)

359

360

There are two kinds of commands to configure WSC1-L, they are:

361

362

* (% style="color:#4472c4" %)**General Commands**.

363

364

These commands are to configure:

365

366

* General system settings like: uplink interval.

367

* LoRaWAN protocol & radio related command.

368

369

They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack((% style="color:red" %)Note~*~*)(%%). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]

370

371

(% style="color:red" %)Note~*~*: Please check early user manual if you don’t have v1.8.0 firmware.

372

373

374

* (% style="color:#4472c4" %)**Commands special design for WSC1-L**

375

376

These commands only valid for WSC1-L, as below:

377

378

379

== 3.1 Set Transmit Interval Time ==

380

381

Feature: Change LoRaWAN End Node Transmit Interval.

382

383

(% style="color:#037691" %)**AT Command: AT+TDC**

384

385

[[image:image-20220624142619-8.png]]

386

387

388

(% style="color:#037691" %)**Downlink Command: 0x01**

389

390

Format: Command Code (0x01) followed by 3 bytes time value.

391

392

If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.

393

394

* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds

395

* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds

== 3.2 Set Emergency Mode ==

401

402

Feature: In emergency mode, WSC1-L will uplink data every 1 minute.

403

404

(% style="color:#037691" %)**AT Command:**

405

406

[[image:image-20220624142956-9.png]]

407

408

409

(% style="color:#037691" %)**Downlink Command:**

410

411

* 0xE101 Same as: AT+ALARMMOD=1

412

* 0xE100 Same as: AT+ALARMMOD=0

== 3.3 Add or Delete RS485 Sensor ==

418

419

Feature: User can add or delete 3^^rd^^ party sensor as long they are RS485/Modbus interface,baud rate support 9600.Maximum can add 4 sensors.

420

421

(% style="color:#037691" %)**AT Command: **

422

423

AT+DYSENSOR=Type_Code, Query_Length, Query_Command , Read_Length , Valid_Data ,has_CRC,timeout

424

425

* Type_Code range: A1 ~~ A4

426

* Query_Length: RS485 Query frame length, Value cannot be greater than 10

427

* Query_Command: RS485 Query frame data to be sent to sensor, cannot be larger than 10 bytes

428

* Read_Length: RS485 response frame length supposed to receive. Max can receive

429

* Valid_Data: valid data from RS485 Response, Valid Data will be added to Payload and upload via LoRaWAN.

430

* has_CRC: RS485 Response crc check (0: no verification required 1: verification required). If CRC=1 and CRC error, valid data will be set to 0.

431

* timeout: RS485 receive timeout (uint:ms). Device will close receive window after timeout

Example:

User need to change external sensor use the type code as address code.

436

437

With a 485 sensor, after correctly changing the address code to A1, the RS485 query frame is shown in the following table:

438

439

440

|0xA1|0x03|0x00|0x00|0x00|0x01|0x9C|0xAA

441

| | | | | | | |

442

443

The response frame of the sensor is as follows:

444

445

446

|0xA1|0x03|0x00|0x02|0x00|0x0A|0x7C|0xAD

447

| | | | | | | |

448

449

Then the following parameters should be:

450

451

* Address_Code range: A1

452

* Query_Length: 8

453

* Query_Command: A103000000019CAA

454

* Read_Length: 8

455

* Valid_Data: 24 (Indicates that the data length is 2 bytes, starting from the 4th byte)

456

* has_CRC: 1

457

* timeout: 1500 (Fill in the test according to the actual situation)

458

459

So the input command is:

460

461

AT+DYSENSOR=A1,8,A103000000019CAA,8,24,1,1500

462

463

464

In every sampling. WSC1-L will auto append the sensor segment as per this structure and uplink.

465

466

|Type Code|Length (Bytes)|Measured Value

|A1|2|0x000A

Related commands:

AT+DYSENSOR=A1,0 –> Delete 3^^rd^^ party sensor A1.

472

473

AT+DYSENSOR ~-~-> List All 3^^rd^^ Party Sensor. Like below:

474

475

476

(% style="color:#037691" %)**Downlink Command: **

477

478

**delete custom sensor A1:**

479

480

* 0xE5A1 Same as: AT+DYSENSOR=A1,0

481

482

**Remove all custom sensors**

* 0xE5FF

== 3.4 RS485 Test Command ==

490

491

(% style="color:#037691" %)**AT Command:**

492

493

|**Command Example**|**Function**|**Response**

494

|AT+RSWRITE=xxxxxx|(((

495

Send command to 485 sensor

496

497

Range : no more than 10 bytes

498

)))|OK

499

500

Eg: Send command **01 03 00 00 00 01 84 0A** to 485 sensor

501

502

AT+RSWRITE=0103000001840A

503

504

505

(% style="color:#037691" %)**Downlink Command:**

506

507

* 0xE20103000001840A Same as: AT+RSWRITE=0103000001840A

== 3.5 RS485 response timeout ==

513

514

Feature: Set or get extended time to receive 485 sensor data.

515

516

(% style="color:#037691" %)**AT Command:**

517

518

|**Command Example**|**Function**|**Response**

519

|AT+DTR=1000|(((

520

Set response timeout to:

Range : 0~~10000

)))|OK

(% style="color:#037691" %)**Downlink Command:**

526

527

Format: Command Code (0xE0) followed by 3 bytes time value.

528

529

If the downlink payload=E0000005, it means set the END Node’s Transmit Interval to 0x000005=5(S), while type code is E0.

530

531

* Example 1: Downlink Payload: E0000005 ~/~/ Set Transmit Interval (DTR) = 5 seconds

532

* Example 2: Downlink Payload: E000000A ~/~/ Set Transmit Interval (DTR) = 10 seconds

== 3.6 Set Sensor Type ==

538

539

Feature: Set sensor in used. If there are 6 sensors, user can set to only send 5 sensors values.

540

541

See [[definition>>||anchor="H"]] for the sensor type.

542

543

544

|(% rowspan="2" %)Byte3|Bit23|Bit22|Bit21|Bit20|Bit19|Bit18|Bit17|Bit16

545

| |A4|A3|A2|A1| | |

546

|(% rowspan="2" %)Byte2|Bit15|Bit14|Bit13|Bit12|Bit11|Bit10|Bit9|Bit8

547

| | |Solar Radiation|PAR|PM10|PM2.5|(((

Rain

Gauge

)))|(((

Air

Pressure

)))

|(% rowspan="2" %)Byte1|Bit7|Bit6|Bit5|Bit4|Bit3|Bit2|Bit1|Bit0

557

|Humidity|Temperature|CO2|(((

Rain/Snow

Detect

)))|illuminance|(((

Wind

Direction

)))|Wind Speed|BAT

(% style="color:#037691" %)**AT Command:**

568

569

|**Command Example**|**Function**|**Response**

570

|AT+STYPE=80221|Set sensor types|OK

571

572

Eg: The setting command **AT+STYPE=802212** means:

573

574

|(% rowspan="2" %)Byte3|Bit23|Bit22|Bit21|Bit20|Bit19|Bit18|Bit17|Bit16

575

|0|0|0|0|1|0|0|0

576

|(% rowspan="2" %)Byte2|Bit15|Bit14|Bit13|Bit12|Bit11|Bit10|Bit9|Bit8

577

|0|0|0|0|0|0|1|0

578

|(% rowspan="2" %)Byte1|Bit7|Bit6|Bit5|Bit4|Bit3|Bit2|Bit1|Bit0

579

|0|0|1|0|0|0|0|1

580

581

So wsc1-L will upload the following data: Custom Sensor A1, Rain Gauge,CO2,BAT.

582

583

584

(% style="color:#037691" %)**Downlink Command:**

585

586

* 0xE400802212 Same as: AT+STYPE=80221

587

588

(% style="color:red" %)**Note:**

589

590

~1. The sensor type will not be saved to flash, and the value will be updated every time the sensor is restarted or rescanned

= 4. Power consumption and battery =

597

598

== 4.1 Total Power Consumption ==

599

600

Dragino Weather Station serial products include the main process unit ( WSC1-L ) and various sensors. The total power consumption equal total power of all above units. The power consumption for main process unit WSC1-L is 18ma @ 12v. and the power consumption of each sensor can be found on the Sensors chapter.

601

602

603

== 4.2 Reduce power consumption ==

604

605

The main process unit WSC1-L is set to LoRaWAN Class C by default. If user want to reduce the power consumption of this unit, user can set it to run in Class A. In Class A mode, WSC1-L will not be to get real-time downlink command from IoT Server.

== 4.3 Battery ==

All sensors are only power by external power source. If external power source is off. All sensor won’t work.

612

613

614

Main Process Unit WSC1-L is powered by both external power source and internal 1000mAh rechargeable battery. If external power source is off, WSC1-L still runs and can send periodically uplinks, but the sensors value will become invalid. External power source can recharge the 1000mAh rechargeable battery.

= 5. Main Process Unit WSC1-L =

== 5.1 Features ==

* Wall Attachable.

* LoRaWAN v1.0.3 Class A protocol.

624

* RS485 / Modbus protocol

625

* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915

626

* AT Commands to change parameters

627

* Remote configure parameters via LoRaWAN Downlink

628

* Firmware upgradable via program port

629

* Powered by external 12v battery

630

* Back up rechargeable 1000mAh battery

631

* IP Rating: IP65

632

* Support default sensors or 3rd party RS485 sensors

633

634

== 5.2 Power Consumption ==

635

636

WSC1-L (without external sensor): Idle: 4mA, Transmit: max 40mA

== 5.3 Storage & Operation Temperature ==

-20°C to +60°C

== 5.4 Pin Mapping ==

646

647

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.png]]

== 5.5 Mechanical ==

Refer LSn50v2 enclosure drawing in: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Mechanical_Drawing/>>url:https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Mechanical_Drawing/]]

== 5.6 Connect to RS485 Sensors ==

658

659

WSC1-L includes a RS485 converter PCB. Which help it easy to connect multiply RS485 sensors. Below is the photo for reference.

660

661

662

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]]

663

664

665

Hardware Design for the Converter Board please see:

666

667

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/RS485_Converter_Board/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/RS485_Converter_Board/]]

= 6. Weather Sensors =

674

675

== 6.1 Rain Gauge ~-~- WSS-01 ==

676

677

WSS-01 RS485 Rain Gauge is used in meteorology and hydrology to gather and measure the amount of liquid precipitation (mainly rainfall) over an area.

678

679

680

WSS-01 uses a tipping bucket to detect rainfall. The tipping bucket use 3D streamline

681

682

shape to make sure it works smoothly and is easy to clean.

683

684

685

WSS-01 is designed to support the Dragino Weather station solution.

686

687

Users only need to connect WSS-01 RS485 interface to WSC1-L. The weather station main

688

689

processor WSC1-L can detect and upload the rainfall to the IoT Server via wireless LoRaWAN protocol

690

691

692

The tipping bucket of WSS-01 is adjusted to the best angle. When installation, user only needs

693

694

to screw up and adjust the bottom horizontally.

695

696

697

WSS-01 package includes screw which can be installed to ground. If user want to install WSS-01 on pole, they can purchase WS-K2 bracket kit.

=== 6.1.1 Feature ===

702

703

* RS485 Rain Gauge

704

* Small dimension, easy to install

705

* Vents under funnel, avoid leaf or other things to avoid rain flow.

706

* ABS enclosure.

707

* Horizontal adjustable.

708

709

=== 6.1.2 Specification ===

* Resolution: 0.2mm

* Accuracy: ±3%

* Rainfall strength: 0mm～4mm/min (max 8mm/min)

714

* Input Power: DC 5~~24v

715

* Interface: RS485

716

* Working Temperature: 0℃～70℃ ( incorrect below 0 degree, because water become ICE)

717

* Working Humidity: <100% (no dewing)

718

* Power Consumption: 4mA @ 12v.

719

720

=== 6.1.3 Dimension ===

721

722

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.jpg||alt="c2d3aee592ccc873bea6dd891451df2"]]

723

724

725

=== 6.1.4 Pin Mapping ===

726

727

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

=== 6.1.5 Installation Notice ===

733

734

Do not power on while connect the cables. Double check the wiring before power on.

735

736

Installation Photo as reference:

737

738

739

(% style="color:#4472c4" %)** Install on Ground:**

740

741

WSS-01 Rain Gauge include screws so can install in ground directly .

742

743

744

(% style="color:#4472c4" %)** Install on pole:**

745

746

If user want to install on pole, they can purchase the (% style="color:#4472c4" %)** WS-K2 : Bracket Kit for Pole installation**(%%), and install as below:

747

748

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]]

749

750

751

WS-K2: Bracket Kit for Pole installation:

752

753

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]

754

755

WSSC-K2 dimension document, please see:

756

757

https:~/~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/

== 6.2 Wind Speed/Direction ~-~- WSS-02 ==

762

763

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]

764

765

WSS-02 is a RS485 wind speed and wind direction monitor designed for weather station solution.

766

767

768

WSS-02 shell is made of polycarbonate composite material, which has good anti-corrosion and anti-corrosion characteristics, and ensure the long-term use of the sensor without rust. At the same time, it cooperates with the internal smooth bearing system to ensure the stability of information collection

769

770

771

Users only need to connect WSS-02 RS485 interface to WSC1-L. The weather station main

772

773

processor WSC1-L can detect and upload the wind speed and direction to the IoT Server via wireless LoRaWAN protocol.

774

775

776

=== 6.2.1 Feature ===

777

778

* RS485 wind speed / direction sensor

779

* PC enclosure, resist corrosion

780

781

=== 6.2.2 Specification ===

782

783

* Wind speed range: 0 ~~ 30m/s, (always show 30m/s for higher speed)

784

* Wind direction range: 0 ~~ 360°

785

* Start wind speed: ≤0.3m/s

786

* Accuracy: ±（0.3＋0.03V）m/s , ±1°

787

* Input Power: DC 5~~24v

788

* Interface: RS485

789

* Working Temperature: -30℃～70℃

790

* Working Humidity: <100% (no dewing)

791

* Power Consumption: 13mA ~~ 12v.

792

* Cable Length: 2 meters

793

794

=== 6.2.3 Dimension ===

795

796

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.jpg]][[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.jpg]]

797

798

799

=== 6.2.4 Pin Mapping ===

800

801

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

802

803

804

=== 6.2.4 Angle Mapping ===

805

806

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]

807

808

809

=== 6.2.5 Installation Notice ===

810

811

Do not power on while connect the cables. Double check the wiring before power on.

812

813

814

The sensor must be installed with below direction, towards North.

|(((

North

)))

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image027.png]]

== 6.3 CO2/PM2.5/PM10 ~-~- WSS-03 ==

831

832

WSS-03 is a RS485 Air Quality sensor. It can monitor CO2, PM2.5 and PM10 at the same time.

833

834

835

WSS-03 uses weather proof shield which can make sure the sensors are well protected against UV & radiation.

836

837

838

WSS-03 is designed to support the Dragino Weather station solution.

839

840

Users only need to connect WSS-03 RS485 interface to WSC1-L. The weather station main

841

842

processor WSC1-L can detect and upload the environment CO2, PM2.5 and PM10 to the IoT Server via wireless LoRaWAN protocol.

843

844

845

=== 6.3.1 Feature ===

846

847

* RS485 CO2, PM2.5, PM10 sensor

848

* NDIR to measure CO2 with Internal Temperature Compensation

849

* Laser Beam Scattering to PM2.5 and PM10

850

851

=== 6.3.2 Specification ===

852

853

* CO2 Range: 0～5000ppm, accuracy: ±3%F•S（25℃）

854

* CO2 resolution: 1ppm

855

* PM2.5/PM10 Range: 0～1000μg/m3 , accuracy ±3%F•S（25℃）

856

* PM2.5/PM10 resolution: 1μg/m3

857

* Input Power: DC 7 ~~ 24v

858

* Preheat time: 3min

859

* Interface: RS485

860

* Working Temperature:

861

** CO2: 0℃～50℃;

862

** PM2.5/PM10: -30 ~~ 50℃

863

* Working Humidity:

864

** PM2.5/PM10: 15～80%RH (no dewing)

865

** CO2: 0～95%RH

866

* Power Consumption: 50mA@ 12v.

867

868

=== 6.3.3 Dimension ===

869

870

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]

871

872

873

=== 6.3.4 Pin Mapping ===

874

875

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

876

877

878

=== 6.3.5 Installation Notice ===

879

880

Do not power on while connect the cables. Double check the wiring before power on.

881

882

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image029.png]]

883

884

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]

== 6.4 Rain/Snow Detect ~-~- WSS-04 ==

892

893

WSS-04 is a RS485 rain / snow detect sensor. It can monitor Rain or Snow event.

894

895

896

WSS-04 has auto heating feature, this ensures measurement more reliable.

897

898

899

WSS-04 is designed to support the Dragino Weather station solution.

900

901

Users only need to connect WSS-04 RS485 interface to WSC1-L. The weather station main

902

903

processor WSC1-L can detect and upload the SNOW/Rain Event to the IoT Server via wireless LoRaWAN protocol.

=== 6.4.1 Feature ===

908

909

* RS485 Rain/Snow detect sensor

910

* Surface heating to dry

911

* grid electrode uses Electroless Nickel/Immersion Gold design for resist corrosion

912

913

=== 6.4.2 Specification ===

914

915

* Detect if there is rain or snow

916

* Input Power: DC 12 ~~ 24v

917

* Interface: RS485

918

* Working Temperature: -30℃～70℃

919

* Working Humidity: 10～90%RH

920

* Power Consumption:

921

** No heating: 12mA @ 12v,

922

** heating: 94ma @ 12v.

923

924

=== 6.4.3 Dimension ===

925

926

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]

927

928

929

=== 6.4.4 Pin Mapping ===

930

931

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

932

933

934

=== 6.4.5 Installation Notice ===

935

936

Do not power on while connect the cables. Double check the wiring before power on.

937

938

939

Install with 15°degree.

940

941

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.png]]

942

943

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image033.png]]

=== 6.4.6 Heating ===

949

950

951

WSS-04 supports auto-heat feature. When the temperature is below the heat start temperature 15℃, WSS-04 starts to heat and stop at stop temperature (default is 25℃).

== 6.5 Temperature, Humidity, Illuminance, Pressure ~-~- WSS-05 ==

958

959

WSS-05 is a 4 in 1 RS485 sensor which can monitor Temperature, Humidity, Illuminance and Pressure at the same time.

960

961

962

WSS-05 is designed to support the Dragino Weather station solution.

963

964

Users only need to connect WSS-05 RS485 interface to WSC1-L. The weather station main

965

966

processor WSC1-L can detect and upload environment Temperature, Humidity, Illuminance, Pressure to the IoT Server via wireless LoRaWAN protocol.

967

968

969

=== 6.5.1 Feature ===

970

971

* RS485 Temperature, Humidity, Illuminance, Pressure sensor

972

973

=== 6.5.2 Specification ===

974

975

* Input Power: DC 12 ~~ 24v

976

* Interface: RS485

977

* Temperature Sensor Spec:

** Range: -30 ~~ 70℃

** resolution 0.1℃

** Accuracy: ±0.5℃

* Humidity Sensor Spec:

982

** Range: 0 ~~ 100% RH

983

** resolution 0.1 %RH

984

** Accuracy: 3% RH

985

* Pressure Sensor Spec:

986

** Range: 10～1100hPa

987

** Resolution: 0.1hPa

988

** Accuracy: ±0.1hPa

989

* Illuminate sensor:

990

** Range: 0～2/20/200kLux

991

** Resolution: 10 Lux

992

** Accuracy: ±3％FS

993

* Working Temperature: -30℃～70℃

994

* Working Humidity: 10～90%RH

995

* Power Consumption: 4mA @ 12v

996

997

=== 6.5.3 Dimension ===

998

999

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image034.jpg]]

1000

1001

1002

=== 6.5.4 Pin Mapping ===

1003

1004

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

1005

1006

1007

=== 6.5.5 Installation Notice ===

1008

1009

Do not power on while connect the cables. Double check the wiring before power on.

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image035.png]]

1014

1015

1016

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]

1017

1018

1019

== 6.6 Total Solar Radiation sensor ~-~- WSS-06 ==

1020

1021

WSS-06 is Total Radiation Sensor can be used to measure the total solar radiation in the spectral range of 0.3 to 3 μm (300 to 3000 nm). If the sensor face is down, the reflected radiation can be measured, and the shading ring can also be used to measure the scattered radiation.

1022

1023

1024

The core device of the radiation sensor is a high-precision photosensitive element, which has good stability and high precision; at the same time, a precision-machined PTTE radiation cover is installed outside the sensing element, which effectively prevents environmental factors from affecting its performance

1025

1026

1027

WSS-06 is designed to support the Dragino Weather station solution.

1028

1029

1030

Users only need to connect WSS-06 RS485 interface to WSC1-L. The weather station main

1031

1032

processor WSC1-L can detect and upload Total Solar Radiation to the IoT Server via wireless LoRaWAN protocol.

=== 6.6.1 Feature ===

1037

1038

* RS485 Total Solar Radiation sensor

1039

* Measure Total Radiation between 0.3～3μm（300～3000nm）

1040

* Measure Reflected Radiation if sense area towards ground.

1041

1042

=== 6.6.2 Specification ===

1043

1044

* Input Power: DC 5 ~~ 24v

1045

* Interface: RS485

1046

* Detect spectrum: 0.3～3μm（300～3000nm）

1047

* Measure strength range: 0～2000W/m2

1048

* Resolution: 0.1W/m2

1049

* Accuracy: ±3%

1050

* Yearly Stability: ≤±2％

1051

* Cosine response: ≤7％ (@ Sun angle 10°)

1052

* Temperature Effect: ±2％（－10℃～40℃）

1053

* Working Temperature: -40℃～70℃

1054

* Working Humidity: 10～90%RH

1055

* Power Consumption: 4mA @ 12v

1056

1057

=== 6.6.3 Dimension ===

1058

1059

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]]

1060

1061

1062

=== 6.6.4 Pin Mapping ===

1063

1064

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

1065

1066

1067

=== 6.6.5 Installation Notice ===

1068

1069

Do not power on while connect the cables. Double check the wiring before power on.

1070

1071

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image037.png]]

1072

1073

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image038.png]]

1074

1075

1076

== 6.7 PAR (Photosynthetically Available Radiation) ~-~- WSS-07 ==

1077

1078

WSS-07 photosynthetically active radiation sensor is mainly used to measure the photosynthetically active radiation of natural light in the wavelength range of 400-700nm.

1079

1080

1081

WSS-07 use precision optical detectors and has an optical filter of 400-700nm, when natural light is irradiated, a voltage signal proportional to the intensity of the incident radiation is generated, and its luminous flux density is proportional to the cosine of the direct angle of the incident light.

WSS-07 is designed to support the Dragino Weather station solution.

1086

1087

1088

Users only need to connect WSS-07 RS485 interface to WSC1-L. The weather station main

1089

1090

processor WSC1-L can detect and upload Photosynthetically Available Radiation to the IoT Server via wireless LoRaWAN protocol.

1091

1092

1093

=== 6.7.1 Feature ===

1094

1095

PAR (Photosynthetically Available Radiation) sensor measure 400 ~~ 700nm wavelength nature light’s Photosynthetically Available Radiation.

1096

1097

1098

When nature light shine on the sense area, it will generate a signal base on the incidence radiation strength.

1099

1100

1101

=== 6.7.2 Specification ===

1102

1103

* Input Power: DC 5 ~~ 24v

1104

* Interface: RS485

1105

* Response Spectrum: 400～700nm

1106

* Measure range: 0～2500μmol/m2•s

1107

* Resolution: 1μmol/m2•s

1108

* Accuracy: ±2%

1109

* Yearly Stability: ≤±2％

1110

* Working Temperature: -30℃～75℃

1111

* Working Humidity: 10～90%RH

1112

* Power Consumption: 3mA @ 12v

1113

1114

=== 6.7.3 Dimension ===

1115

1116

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]]

1117

1118

1119

=== 6.7.4 Pin Mapping ===

1120

1121

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

1122

1123

1124

=== 6.7.5 Installation Notice ===

1125

1126

Do not power on while connect the cables. Double check the wiring before power on.

1127

1128

1129

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image037.png]]

1130

1131

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image038.png]]

= 7. FAQ =

== 7.1 What else do I need to purchase to build Weather Station? ==

1137

1138

Below is the installation photo and structure:

1139

1140

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.png]]

1141

1142

1143

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image039.png]]

== 7.2 How to upgrade firmware for WSC1-L? ==

1149

1150

Firmware Location & Change log:

1151

1152

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/WSC1-L/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/WSC1-L/]]

1153

1154

1155

Firmware Upgrade instruction:

1156

1157

[[https:~~/~~/wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Hardware_Upgrade_Method_Support_List>>url:https://wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Hardware_Upgrade_Method_Support_List]]

1158

1159

1160

== 7.3 How to change the LoRa Frequency Bands/Region? ==

1161

1162

User can follow the introduction for how to upgrade image. When download the images, choose the required image file for download.

== 7.4 Can I add my weather sensors? ==

1167

1168

Yes, connect the sensor to RS485 bus and see instruction: [[add sensors.>>path:#Add_sensor]]

1169

1170

1171

= 8. Trouble Shooting =

= 9. Order Info =

== 9.1 Main Process Unit ==

1182

1183

Part Number: **WSC1-L-XX**

1184

1185

**XX**: The default frequency band

1186

1187

* **AS923**: LoRaWAN AS923 band

1188

* **AU915**: LoRaWAN AU915 band

1189

* **EU433**: LoRaWAN EU433 band

1190

* **EU868**: LoRaWAN EU868 band

1191

* **KR920**: LoRaWAN KR920 band

1192

* **US915**: LoRaWAN US915 band

1193

* **IN865**: LoRaWAN IN865 band

1194

* **CN470**: LoRaWAN CN470 band

== 9.2 Sensors ==

|**Sensor Model**|**Part Number**

1199

|**Rain Gauge**|WSS-01

1200

|**Rain Gauge installation Bracket for Pole**|WS-K2

1201

|**Wind Speed Direction 2 in 1 Sensor**|WSS-02

1202

|**CO2/PM2.5/PM10 3 in 1 Sensor**|WSS-03

1203

|**Rain/Snow Detect Sensor**|WSS-04

1204

|**Temperature, Humidity, illuminance and Pressure 4 in 1 sensor**|WSS-05

1205

|**Total Solar Radiation Sensor**|WSS-06

1206

|**PAR (Photosynthetically Available Radiation)**|WSS-07

= 10. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1211

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to

1212

1213

[[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]

= 11. Appendix I: Field Installation Photo =

1220

1221