Skip to Content
Last modified by Mengting Qiu on 2025/07/09 16:00
From version 79.25
edited by Xiaoling
on 2022/06/24 17:24
Change comment: There is no comment for this version
To version 55.2
edited by Xiaoling
on 2022/06/24 15:48
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -61,14 +61,15 @@
61 61  [[image:1656042136605-251.png]]
62 62  
63 63  
64 -(% style="color:red" %)**Notice 1:**
64 +(% style="color:red" %) ** Notice 1:**
65 65  
66 66  * All weather sensors and WSC1-L are powered by MPPT solar recharge controller. MPPT is connected to solar panel and storage battery.
67 67  * WSC1-L has an extra 1000mAh back up battery. So it can work even solar panel and storage battery Fails.
68 68  * Weather sensors won’t work if solar panel and storage battery fails.
69 69  
70 -(% style="color:red" %)**Notice 2:**
71 71  
71 +(% style="color:red" %)** Notice 2:**
72 +
72 72  Due to shipment and importation limitation, user is better to purchase below parts locally:
73 73  
74 74  * Solar Panel
... ... @@ -79,6 +79,8 @@
79 79  
80 80  
81 81  
83 +
84 +
82 82  == 2.2 How it works? ==
83 83  
84 84  (((
... ... @@ -86,9 +86,7 @@
86 86  )))
87 87  
88 88  
89 -(((
90 90  Open WSC1-L and put the yellow jumper as below position to power on WSC1-L.
91 -)))
92 92  
93 93  [[image:1656042192857-709.png]]
94 94  
... ... @@ -99,6 +99,9 @@
99 99  1. User can send a downlink command to WSC1-L to do a re-scan on the available sensors.
100 100  
101 101  
103 +
104 +
105 +
102 102  == 2.3 Example to use for LoRaWAN network ==
103 103  
104 104  This section shows an example for how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.
... ... @@ -141,9 +141,7 @@
141 141  
142 142  
143 143  
144 -(((
145 145  (% style="color:blue" %)**Step 2**(%%): Power on WSC1-L, it will start to join TTN server. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.
146 -)))
147 147  
148 148  
149 149  [[image:1656042745346-283.png]]
... ... @@ -157,7 +157,6 @@
157 157  * Valid Sensor Value: Use FPORT=2
158 158  * Other control command: Use FPORT other than 2.
159 159  
160 -
161 161  === 2.4.1 Uplink FPORT~=5, Device Status ===
162 162  
163 163  Uplink the device configures with FPORT=5. Once WSC1-L Joined the network, it will uplink this message to the server. After first uplink, WSC1-L will uplink Device Status every 12 hours
... ... @@ -222,13 +222,9 @@
222 222  
223 223  ==== (% style="color:#037691" %)**BAT:**(%%) ====
224 224  
225 -(((
226 226  shows the battery voltage for WSC1-L MCU.
227 -)))
228 228  
229 -(((
230 230  Ex1: 0x0BD6/1000 = 3.03 V
231 -)))
232 232  
233 233  
234 234  
... ... @@ -296,50 +296,22 @@
296 296  [[image:image-20220624140352-2.png]]
297 297  
298 298  
299 -(((
300 300  Below is an example payload:  [[image:image-20220624140615-3.png]]
301 -)))
302 302  
303 -(((
304 -
305 -)))
306 306  
307 -(((
308 308  When sending this payload to LoRaWAN server. WSC1-L will send this in one uplink or several uplinks according to LoRaWAN spec requirement. For example, total length of Payload is 54 bytes.
309 -)))
310 310  
311 -* (((
312 -When WSC1-L sending in US915 frequency DR0 data rate. Because this data rate has limitation of 11 bytes payload for each uplink. The payload will be split into below packets and uplink.
313 -)))
301 +* When WSC1-L sending in US915 frequency DR0 data rate. Because this data rate has limitation of 11 bytes payload for each uplink. The payload will be split into below packets and uplink.
314 314  
315 -(((
316 316   Uplink 1:  [[image:image-20220624140735-4.png]]
317 -)))
318 318  
319 -(((
320 -
321 -)))
322 -
323 -(((
324 324   Uplink 2:  [[image:image-20220624140842-5.png]]
325 -)))
326 326  
327 -(((
328 -
329 -)))
330 330  
331 -* (((
332 -When WSC1-L sending in EU868 frequency DR0 data rate. The payload will be split into below packets and uplink:
333 -)))
308 +* When WSC1-L sending in EU868 frequency DR0 data rate. The payload will be split into below packets and uplink:
334 334  
335 -(((
336 336   Uplink 1:  [[image:image-20220624141025-6.png]]
337 -)))
338 338  
339 -(((
340 -
341 -)))
342 -
343 343   Uplink 2:  [[image:image-20220624141100-7.png]]
344 344  
345 345  
... ... @@ -347,25 +347,14 @@
347 347  
348 348  === 2.4.3 Decoder in TTN V3 ===
349 349  
350 -(((
351 351  In LoRaWAN platform, user only see HEX payload by default, user needs to use payload formatters to decode the payload to see human-readable value.
352 -)))
353 353  
354 -(((
355 -
356 -)))
357 357  
358 -(((
359 359  Download decoder for suitable platform from:
360 -)))
361 361  
362 -(((
363 363  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/WSC1-L/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/WSC1-L/]]
364 -)))
365 365  
366 -(((
367 367  and put as below:
368 -)))
369 369  
370 370  [[image:1656051152438-578.png]]
371 371  
... ... @@ -373,21 +373,12 @@
373 373  
374 374  == 2.5 Show data on Application Server ==
375 375  
376 -(((
377 377  Application platform provides a human friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
378 -)))
379 379  
380 -(((
381 -
382 -)))
383 383  
384 -(((
385 385  (% style="color:blue" %)**Step 1**(%%): Be sure that your device is programmed and properly connected to the LoRaWAN network.
386 -)))
387 387  
388 -(((
389 389  (% style="color:blue" %)**Step 2**(%%): Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.
390 -)))
391 391  
392 392  [[image:1656051197172-131.png]]
393 393  
... ... @@ -457,6 +457,9 @@
457 457  * Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
458 458  
459 459  
409 +
410 +
411 +
460 460  == 3.2 Set Emergency Mode ==
461 461  
462 462  Feature: In emergency mode, WSC1-L will uplink data every 1 minute.
... ... @@ -472,53 +472,30 @@
472 472  * 0xE100     Same as: AT+ALARMMOD=0
473 473  
474 474  
427 +
428 +
429 +
475 475  == 3.3 Add or Delete RS485 Sensor ==
476 476  
477 -(((
478 478  Feature: User can add or delete 3^^rd^^ party sensor as long they are RS485/Modbus interface,baud rate support 9600.Maximum can add 4 sensors.
479 -)))
480 480  
481 -(((
482 482  (% style="color:#037691" %)**AT Command: **
483 -)))
484 484  
485 -(((
486 486  (% style="color:blue" %)**AT+DYSENSOR=Type_Code, Query_Length, Query_Command , Read_Length , Valid_Data ,has_CRC,timeout**
487 -)))
488 488  
489 -* (((
490 -Type_Code range:  A1 ~~ A4
491 -)))
492 -* (((
493 -Query_Length:  RS485 Query frame length, Value cannot be greater than 10
494 -)))
495 -* (((
496 -Query_Command:  RS485 Query frame data to be sent to sensor, cannot be larger than 10 bytes
497 -)))
498 -* (((
499 -Read_Length:  RS485 response frame length supposed to receive. Max can receive
500 -)))
501 -* (((
502 -Valid_Data:  valid data from RS485 Response, Valid Data will be added to Payload and upload via LoRaWAN.
503 -)))
504 -* (((
505 -has_CRC:  RS485 Response crc check  (0: no verification required 1: verification required). If CRC=1 and CRC error, valid data will be set to 0.
506 -)))
507 -* (((
508 -timeout:  RS485 receive timeout (uint:ms). Device will close receive window after timeout
509 -)))
438 +* Type_Code range:  A1 ~~ A4
439 +* Query_Length:  RS485 Query frame length, Value cannot be greater than 10
440 +* Query_Command:  RS485 Query frame data to be sent to sensor, cannot be larger than 10 bytes
441 +* Read_Length:  RS485 response frame length supposed to receive. Max can receive
442 +* Valid_Data:  valid data from RS485 Response, Valid Data will be added to Payload and upload via LoRaWAN.
443 +* has_CRC:  RS485 Response crc check  (0: no verification required 1: verification required). If CRC=1 and CRC error, valid data will be set to 0.
444 +* timeout:  RS485 receive timeout (uint:ms). Device will close receive window after timeout
510 510  
511 -(((
512 512  **Example:**
513 -)))
514 514  
515 -(((
516 516  User need to change external sensor use the type code as address code.
517 -)))
518 518  
519 -(((
520 520  With a 485 sensor, after correctly changing the address code to A1, the RS485 query frame is shown in the following table:
521 -)))
522 522  
523 523  [[image:image-20220624143553-10.png]]
524 524  
... ... @@ -539,6 +539,7 @@
539 539  * has_CRC: 1
540 540  * timeout: 1500 (Fill in the test according to the actual situation)
541 541  
471 +
542 542  **So the input command is:**
543 543  
544 544  AT+DYSENSOR=A1,8,A103000000019CAA,8,24,1,1500
... ... @@ -568,6 +568,9 @@
568 568  * 0xE5FF  
569 569  
570 570  
501 +
502 +
503 +
571 571  == 3.4 RS485 Test Command ==
572 572  
573 573  (% style="color:#037691" %)**AT Command:**
... ... @@ -590,6 +590,9 @@
590 590  * 0xE20103000001840A     Same as: AT+RSWRITE=0103000001840A
591 591  
592 592  
526 +
527 +
528 +
593 593  == 3.5 RS485 response timeout ==
594 594  
595 595  Feature: Set or get extended time to receive 485 sensor data.
... ... @@ -614,15 +614,14 @@
614 614  * Example 2: Downlink Payload: E000000A ~/~/ Set Transmit Interval (DTR) = 10 seconds
615 615  
616 616  
553 +
554 +
555 +
617 617  == 3.6 Set Sensor Type ==
618 618  
619 -(((
620 620  Feature: Set sensor in used. If there are 6 sensors, user can set to only send 5 sensors values.
621 -)))
622 622  
623 -(((
624 624  See [[definition>>||anchor="HWeatherSensorTypes:"]] for the sensor type.
625 -)))
626 626  
627 627  [[image:image-20220624144904-12.png]]
628 628  
... ... @@ -696,7 +696,6 @@
696 696  * IP Rating: IP65
697 697  * Support default sensors or 3rd party RS485 sensors
698 698  
699 -
700 700  == 5.2 Power Consumption ==
701 701  
702 702  WSC1-L (without external sensor): Idle: 4mA, Transmit: max 40mA
... ... @@ -789,31 +789,19 @@
789 789  
790 790  === 6.1.5 Installation Notice ===
791 791  
792 -(((
793 793  Do not power on while connect the cables. Double check the wiring before power on.
794 -)))
795 795  
796 -(((
797 797  Installation Photo as reference:
798 -)))
799 799  
800 800  
801 -(((
802 802  (% style="color:#4472c4" %)** Install on Ground:**
803 -)))
804 804  
805 -(((
806 806  WSS-01 Rain Gauge include screws so can install in ground directly .
807 -)))
808 808  
809 809  
810 -(((
811 811  (% style="color:#4472c4" %)** Install on pole:**
812 -)))
813 813  
814 -(((
815 815  If user want to install on pole, they can purchase the (% style="color:#4472c4" %)** WS-K2 :  Bracket Kit for Pole installation**(%%), and install as below:
816 -)))
817 817  
818 818  [[image:image-20220624152218-1.png||height="526" width="276"]]
819 819  
... ... @@ -820,6 +820,7 @@
820 820  WS-K2: Bracket Kit for Pole installation
821 821  
822 822  
745 +
823 823  WSSC-K2 dimension document, please see:
824 824  
825 825  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/]]
... ... @@ -879,13 +879,9 @@
879 879  
880 880  === 6.2.6  Installation Notice ===
881 881  
882 -(((
883 883  Do not power on while connect the cables. Double check the wiring before power on.
884 -)))
885 885  
886 -(((
887 887  The sensor must be installed with below direction, towards North.
888 -)))
889 889  
890 890  [[image:image-20220624153901-3.png]]
891 891  
... ... @@ -945,6 +945,8 @@
945 945  
946 946  Do not power on while connect the cables. Double check the wiring before power on.
947 947  
867 +[[image:1656056780923-606.png]]
868 +
948 948  [[image:1656056751153-304.png]]
949 949  
950 950  [[image:1656056766224-773.png]]
... ... @@ -1001,9 +1001,7 @@
1001 1001  Do not power on while connect the cables. Double check the wiring before power on.
1002 1002  
1003 1003  
1004 -(((
1005 1005  Install with 15°degree.
1006 -)))
1007 1007  
1008 1008   [[image:1656056873783-780.png]]
1009 1009  
... ... @@ -1011,25 +1011,29 @@
1011 1011  [[image:1656056883736-804.png]]
1012 1012  
1013 1013  
933 +
934 +
1014 1014  === 6.4.6 Heating ===
1015 1015  
1016 -(((
937 +
1017 1017  WSS-04 supports auto-heat feature. When the temperature is below the heat start temperature 15℃, WSS-04 starts to heat and stop at stop temperature (default is 25℃).
1018 -)))
1019 1019  
1020 1020  
1021 -== 6.5 Temperature, Humidity, Illuminance, Pressure ~-~- WSS-05 ==
1022 1022  
1023 1023  
1024 -(((
943 +
944 +== 6.5 Temperature, Humidity, Illuminance, Pressure ~-~- WSS-05 ==
945 +
1025 1025  WSS-05 is a 4 in 1 RS485 sensor which can monitor Temperature, Humidity, Illuminance and Pressure at the same time.
1026 -)))
1027 1027  
1028 -(((
1029 -WSS-05 is designed to support the Dragino Weather station solution. Users only need to connect WSS-05 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload environment Temperature, Humidity, Illuminance, Pressure to the IoT Server via wireless LoRaWAN protocol.
1030 -)))
1031 1031  
949 +WSS-05 is designed to support the Dragino Weather station solution.
1032 1032  
951 +Users only need to connect WSS-05 RS485 interface to WSC1-L. The weather station main
952 +
953 +processor WSC1-L can detect and upload environment Temperature, Humidity, Illuminance, Pressure to the IoT Server via wireless LoRaWAN protocol.
954 +
955 +
1033 1033  === 6.5.1 Feature ===
1034 1034  
1035 1035  * RS485 Temperature, Humidity, Illuminance, Pressure sensor
... ... @@ -1062,12 +1062,12 @@
1062 1062  
1063 1063  === 6.5.3 Dimension ===
1064 1064  
1065 -[[image:1656057170639-522.png]]
988 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image034.jpg]]
1066 1066  
1067 1067  
1068 1068  === 6.5.4 Pin Mapping ===
1069 1069  
1070 -[[image:1656057181899-910.png]]
993 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
1071 1071  
1072 1072  
1073 1073  === 6.5.5 Installation Notice ===
... ... @@ -1074,29 +1074,31 @@
1074 1074  
1075 1075  Do not power on while connect the cables. Double check the wiring before power on.
1076 1076  
1077 -[[image:1656057199955-514.png]]
1078 1078  
1079 1079  
1080 -[[image:1656057212438-475.png]]
1002 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image035.png]]
1081 1081  
1082 1082  
1083 -== 6.6 Total Solar Radiation sensor ~-~- WSS-06 ==
1005 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]
1084 1084  
1085 1085  
1086 -(((
1008 +== 6.6 Total Solar Radiation sensor ~-~- WSS-06 ==
1009 +
1087 1087  WSS-06 is Total Radiation Sensor can be used to measure the total solar radiation in the spectral range of 0.3 to 3 μm (300 to 3000 nm). If the sensor face is down, the reflected radiation can be measured, and the shading ring can also be used to measure the scattered radiation.
1088 -)))
1089 1089  
1090 -(((
1012 +
1091 1091  The core device of the radiation sensor is a high-precision photosensitive element, which has good stability and high precision; at the same time, a precision-machined PTTE radiation cover is installed outside the sensing element, which effectively prevents environmental factors from affecting its performance
1092 -)))
1093 1093  
1094 -(((
1095 -WSS-06 is designed to support the Dragino Weather station solution.  Users only need to connect WSS-06 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload Total Solar Radiation to the IoT Server via wireless LoRaWAN protocol.
1096 -)))
1097 1097  
1016 +WSS-06 is designed to support the Dragino Weather station solution.
1098 1098  
1099 1099  
1019 +Users only need to connect WSS-06 RS485 interface to WSC1-L. The weather station main
1020 +
1021 +processor WSC1-L can detect and upload Total Solar Radiation to the IoT Server via wireless LoRaWAN protocol.
1022 +
1023 +
1024 +
1100 1100  === 6.6.1 Feature ===
1101 1101  
1102 1102  * RS485 Total Solar Radiation sensor
... ... @@ -1122,12 +1122,12 @@
1122 1122  
1123 1123  === 6.6.3 Dimension ===
1124 1124  
1125 -[[image:1656057348695-898.png]]
1050 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]]
1126 1126  
1127 1127  
1128 1128  === 6.6.4 Pin Mapping ===
1129 1129  
1130 -[[image:1656057359343-744.png]]
1055 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
1131 1131  
1132 1132  
1133 1133  === 6.6.5 Installation Notice ===
... ... @@ -1134,37 +1134,34 @@
1134 1134  
1135 1135  Do not power on while connect the cables. Double check the wiring before power on.
1136 1136  
1137 -[[image:1656057369259-804.png]]
1062 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image037.png]]
1138 1138  
1064 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image038.png]]
1139 1139  
1140 -[[image:1656057377943-564.png]]
1141 1141  
1142 -
1143 1143  == 6.7 PAR (Photosynthetically Available Radiation) ~-~- WSS-07 ==
1144 1144  
1145 -
1146 -(((
1147 1147  WSS-07 photosynthetically active radiation sensor is mainly used to measure the photosynthetically active radiation of natural light in the wavelength range of 400-700nm.
1148 -)))
1149 1149  
1150 -(((
1071 +
1151 1151  WSS-07 use precision optical detectors and has an optical filter of 400-700nm, when natural light is irradiated, a voltage signal proportional to the intensity of the incident radiation is generated, and its luminous flux density is proportional to the cosine of the direct angle of the incident light.
1152 -)))
1153 1153  
1154 -(((
1155 -WSS-07 is designed to support the Dragino Weather station solution. Users only need to connect WSS-07 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload Photosynthetically Available Radiation to the IoT Server via wireless LoRaWAN protocol.
1156 -)))
1157 1157  
1158 1158  
1076 +WSS-07 is designed to support the Dragino Weather station solution.
1077 +
1078 +
1079 +Users only need to connect WSS-07 RS485 interface to WSC1-L. The weather station main
1080 +
1081 +processor WSC1-L can detect and upload Photosynthetically Available Radiation to the IoT Server via wireless LoRaWAN protocol.
1082 +
1083 +
1159 1159  === 6.7.1 Feature ===
1160 1160  
1161 -(((
1162 -PAR (Photosynthetically Available Radiation) sensor measure 400 ~~ 700nm wavelength nature light's Photosynthetically Available Radiation.
1163 -)))
1086 +PAR (Photosynthetically Available Radiation) sensor measure 400 ~~ 700nm wavelength nature light’s Photosynthetically Available Radiation.
1164 1164  
1165 -(((
1088 +
1166 1166  When nature light shine on the sense area, it will generate a signal base on the incidence radiation strength.
1167 -)))
1168 1168  
1169 1169  
1170 1170  === 6.7.2 Specification ===
... ... @@ -1183,12 +1183,12 @@
1183 1183  
1184 1184  === 6.7.3 Dimension ===
1185 1185  
1186 -[[image:1656057538793-888.png]]
1108 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]]
1187 1187  
1188 1188  
1189 1189  === 6.7.4 Pin Mapping ===
1190 1190  
1191 -[[image:1656057548116-203.png]]
1113 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
1192 1192  
1193 1193  
1194 1194  === 6.7.5 Installation Notice ===
... ... @@ -1196,12 +1196,11 @@
1196 1196  Do not power on while connect the cables. Double check the wiring before power on.
1197 1197  
1198 1198  
1199 -[[image:1656057557191-895.png]]
1121 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image037.png]]
1200 1200  
1123 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image038.png]]
1201 1201  
1202 -[[image:1656057565783-251.png]]
1203 1203  
1204 -
1205 1205  = 7. FAQ =
1206 1206  
1207 1207  == 7.1 What else do I need to purchase to build Weather Station? ==
... ... @@ -1208,50 +1208,47 @@
1208 1208  
1209 1209  Below is the installation photo and structure:
1210 1210  
1211 -[[image:1656057598349-319.png]]
1132 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.png]]
1212 1212  
1213 1213  
1214 -[[image:1656057608049-693.png]]
1135 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image039.png]]
1215 1215  
1216 1216  
1217 1217  
1139 +
1218 1218  == 7.2 How to upgrade firmware for WSC1-L? ==
1219 1219  
1220 -(((
1221 1221  Firmware Location & Change log:
1222 -)))
1223 1223  
1224 -(((
1225 1225  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/WSC1-L/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/WSC1-L/]]
1226 -)))
1227 1227  
1228 1228  
1229 -(((
1230 -Firmware Upgrade instruction:  [[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome||anchor="H2.HardwareUpgradeMethodSupportList"]]
1231 -)))
1147 +Firmware Upgrade instruction:
1232 1232  
1149 +[[https:~~/~~/wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Hardware_Upgrade_Method_Support_List>>url:https://wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Hardware_Upgrade_Method_Support_List]]
1233 1233  
1151 +
1234 1234  == 7.3 How to change the LoRa Frequency Bands/Region? ==
1235 1235  
1236 -User can follow the introduction for how to [[upgrade image>>||anchor="H7.2HowtoupgradefirmwareforWSC1-L3F"]]. When download the images, choose the required image file for download.
1154 +User can follow the introduction for how to upgrade image. When download the images, choose the required image file for download.
1237 1237  
1238 1238  
1157 +
1239 1239  == 7.4 Can I add my weather sensors? ==
1240 1240  
1241 -Yes, connect the sensor to RS485 bus and see instruction:  [[add sensors.>>||anchor="H3.3AddorDeleteRS485Sensor"]]
1160 +Yes, connect the sensor to RS485 bus and see instruction: [[add sensors.>>path:#Add_sensor]]
1242 1242  
1243 1243  
1244 1244  = 8. Trouble Shooting =
1245 1245  
1246 -== 8.1 AT Command input doesn't work ==
1247 1247  
1248 -(((
1249 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1250 -)))
1251 1251  
1252 1252  
1168 +
1169 +
1253 1253  = 9. Order Info =
1254 1254  
1172 +
1255 1255  == 9.1 Main Process Unit ==
1256 1256  
1257 1257  Part Number: (% style="color:blue" %)**WSC1-L-XX**
... ... @@ -1268,74 +1268,64 @@
1268 1268  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1269 1269  
1270 1270  
1271 -
1272 -
1273 -
1274 1274  == 9.2 Sensors ==
1275 1275  
1276 -(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:400px" %)
1277 -|=(% style="width: 300px;" %)**Sensor Model**|=(% style="width: 100px;" %)**Part Number**
1278 -|(% style="width:462px" %)**Rain Gauge**|(% style="width:110px" %)WSS-01
1279 -|(% style="width:462px" %)**Rain Gauge installation Bracket for Pole**|(% style="width:110px" %)WS-K2
1280 -|(% style="width:462px" %)**Wind Speed Direction 2 in 1 Sensor**|(% style="width:110px" %)WSS-02
1281 -|(% style="width:462px" %)**CO2/PM2.5/PM10 3 in 1 Sensor**|(% style="width:110px" %)WSS-03
1282 -|(% style="width:462px" %)**Rain/Snow Detect Sensor**|(% style="width:110px" %)WSS-04
1283 -|(% style="width:462px" %)**Temperature, Humidity, illuminance and Pressure 4 in 1 sensor**|(% style="width:110px" %)WSS-05
1284 -|(% style="width:462px" %)**Total Solar Radiation Sensor**|(% style="width:110px" %)WSS-06
1285 -|(% style="width:462px" %)**PAR (Photosynthetically Available Radiation)**|(% style="width:110px" %)WSS-07
1191 +|**Sensor Model**|**Part Number**
1192 +|**Rain Gauge**|WSS-01
1193 +|**Rain Gauge installation Bracket for Pole**|WS-K2
1194 +|**Wind Speed Direction 2 in 1 Sensor**|WSS-02
1195 +|**CO2/PM2.5/PM10 3 in 1 Sensor**|WSS-03
1196 +|**Rain/Snow Detect Sensor**|WSS-04
1197 +|**Temperature, Humidity, illuminance and Pressure 4 in 1 sensor**|WSS-05
1198 +|**Total Solar Radiation Sensor**|WSS-06
1199 +|**PAR (Photosynthetically Available Radiation)**|WSS-07
1286 1286  
1287 -
1288 -
1289 -
1290 -
1291 1291  = 10. Support =
1292 1292  
1293 1293  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1294 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
1204 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
1295 1295  
1206 +[[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
1296 1296  
1297 1297  
1298 1298  
1299 1299  
1211 +
1300 1300  = 11. Appendix I: Field Installation Photo =
1301 1301  
1302 1302  
1303 -[[image:1656058346362-132.png]]
1215 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image040.png]]
1304 1304  
1217 +
1305 1305  **Storage Battery**: 12v,12AH li battery
1306 1306  
1307 1307  
1221 +Wind Speed/Direction.
1308 1308  
1309 -**Wind Speed/Direction**
1223 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image041.png]]
1310 1310  
1311 -[[image:1656058373174-421.png]]
1312 1312  
1226 +Total Solar Radiation sensor
1313 1313  
1228 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image042.png]]
1314 1314  
1315 -**Total Solar Radiation sensor**
1316 1316  
1317 -[[image:1656058397364-282.png]]
1318 1318  
1232 +PAR Sensor
1319 1319  
1234 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image043.png]]
1320 1320  
1321 -**PAR Sensor**
1322 1322  
1323 -[[image:1656058416171-615.png]]
1237 +CO2/PM2.5/PM10 3 in 1 sensor
1324 1324  
1239 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image044.png]]
1325 1325  
1326 1326  
1327 -**CO2/PM2.5/PM10 3 in 1 sensor**
1242 +Rain / Snow Detect:
1328 1328  
1329 -[[image:1656058441194-827.png]]
1244 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image045.png]]
1330 1330  
1331 1331  
1247 +Rain Gauge.
1332 1332  
1333 -**Rain / Snow Detect**
1334 -
1335 -[[image:1656058451456-166.png]]
1336 -
1337 -
1338 -
1339 -**Rain Gauge**
1340 -
1341 -[[image:1656058463455-569.png]]
1249 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image046.png]]
1656057016033-551.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -320.4 KB
Content
1656057170639-522.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -105.3 KB
Content
1656057181899-910.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -319.1 KB
Content
1656057199955-514.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -267.3 KB
Content
1656057212438-475.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -153.3 KB
Content
1656057348695-898.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.7 KB
Content
1656057359343-744.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -310.4 KB
Content
1656057369259-804.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -202.3 KB
Content
1656057377943-564.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -94.7 KB
Content
1656057538793-888.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.7 KB
Content
1656057548116-203.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -284.5 KB
Content
1656057557191-895.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -202.3 KB
Content
1656057565783-251.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -114.7 KB
Content
1656057598349-319.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -106.2 KB
Content
1656057608049-693.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -523.4 KB
Content
1656058346362-132.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.2 MB
Content
1656058373174-421.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -742.2 KB
Content
1656058397364-282.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -848.1 KB
Content
1656058416171-615.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -560.4 KB
Content
1656058441194-827.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
1656058451456-166.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -366.8 KB
Content
1656058463455-569.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -924.1 KB
Content