Last modified by Xiaoling on 2025/04/25 09:08
<
From version < 39.2 >
edited by Xiaoling
on 2022/06/24 15:23
To version < 32.4 >
edited by Xiaoling
on 2022/06/24 14:51
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -150,8 +150,6 @@
150 150  * Valid Sensor Value: Use FPORT=2
151 151  * Other control command: Use FPORT other than 2.
152 152  
153 -
154 -
155 155  === 2.4.1 Uplink FPORT~=5, Device Status ===
156 156  
157 157  Uplink the device configures with FPORT=5. Once WSC1-L Joined the network, it will uplink this message to the server. After first uplink, WSC1-L will uplink Device Status every 12 hours
... ... @@ -394,6 +394,8 @@
394 394  * Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
395 395  * Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
396 396  
395 +
396 +
397 397  == 3.2 Set Emergency Mode ==
398 398  
399 399  Feature: In emergency mode, WSC1-L will uplink data every 1 minute.
... ... @@ -408,6 +408,8 @@
408 408  * 0xE101     Same as: AT+ALARMMOD=1
409 409  * 0xE100     Same as: AT+ALARMMOD=0
410 410  
411 +
412 +
411 411  == 3.3 Add or Delete RS485 Sensor ==
412 412  
413 413  Feature: User can add or delete 3^^rd^^ party sensor as long they are RS485/Modbus interface,baud rate support 9600.Maximum can add 4 sensors.
... ... @@ -424,6 +424,7 @@
424 424  * has_CRC:  RS485 Response crc check  (0: no verification required 1: verification required). If CRC=1 and CRC error, valid data will be set to 0.
425 425  * timeout:  RS485 receive timeout (uint:ms). Device will close receive window after timeout
426 426  
429 +
427 427  **Example:**
428 428  
429 429  User need to change external sensor use the type code as address code.
... ... @@ -448,6 +448,7 @@
448 448  * has_CRC: 1
449 449  * timeout: 1500 (Fill in the test according to the actual situation)
450 450  
454 +
451 451  **So the input command is:**
452 452  
453 453  AT+DYSENSOR=A1,8,A103000000019CAA,8,24,1,1500
... ... @@ -476,6 +476,8 @@
476 476  
477 477  * 0xE5FF  
478 478  
483 +
484 +
479 479  == 3.4 RS485 Test Command ==
480 480  
481 481  (% style="color:#037691" %)**AT Command:**
... ... @@ -497,6 +497,8 @@
497 497  
498 498  * 0xE20103000001840A     Same as: AT+RSWRITE=0103000001840A
499 499  
506 +
507 +
500 500  == 3.5 RS485 response timeout ==
501 501  
502 502  Feature: Set or get extended time to receive 485 sensor data.
... ... @@ -511,6 +511,7 @@
511 511  Range : 0~~10000
512 512  )))|(% style="width:85px" %)OK
513 513  
522 +
514 514  (% style="color:#037691" %)**Downlink Command:**
515 515  
516 516  Format: Command Code (0xE0) followed by 3 bytes time value.
... ... @@ -520,15 +520,18 @@
520 520  * Example 1: Downlink Payload: E0000005 ~/~/ Set Transmit Interval (DTR) = 5 seconds
521 521  * Example 2: Downlink Payload: E000000A ~/~/ Set Transmit Interval (DTR) = 10 seconds
522 522  
532 +
533 +
523 523  == 3.6 Set Sensor Type ==
524 524  
525 525  Feature: Set sensor in used. If there are 6 sensors, user can set to only send 5 sensors values.
526 526  
527 -See [[definition>>||anchor="HWeatherSensorTypes:"]] for the sensor type.
538 +See [[definition>>||anchor="H"]] for the sensor type.
528 528  
529 529  [[image:image-20220624144904-12.png]]
530 530  
531 531  
543 +
532 532  (% style="color:#037691" %)**AT Command:**
533 533  
534 534  (% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:377px" %)
... ... @@ -535,6 +535,7 @@
535 535  |=(% style="width: 157px;" %)**Command Example**|=(% style="width: 130px;" %)**Function**|=(% style="width: 87px;" %)**Response**
536 536  |(% style="width:157px" %)AT+STYPE=80221|(% style="width:130px" %)Set sensor types|(% style="width:87px" %)OK
537 537  
550 +
538 538  Eg: The setting command **AT+STYPE=802212** means:
539 539  
540 540  (% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:495px" %)
... ... @@ -554,11 +554,12 @@
554 554  
555 555  (% style="color:red" %)**Note:**
556 556  
557 -~1. The sensor type will not be saved to flash, and the value will be updated every time the sensor is restarted or rescanned.
570 +~1. The sensor type will not be saved to flash, and the value will be updated every time the sensor is restarted or rescanned
558 558  
559 559  
560 560  
561 561  
575 +
562 562  = 4. Power consumption and battery =
563 563  
564 564  == 4.1 Total Power Consumption ==
... ... @@ -571,17 +571,16 @@
571 571  The main process unit WSC1-L is set to LoRaWAN Class C by default. If user want to reduce the power consumption of this unit, user can set it to run in Class A. In Class A mode, WSC1-L will not be to get real-time downlink command from IoT Server.
572 572  
573 573  
588 +
574 574  == 4.3 Battery ==
575 575  
576 -(((
577 -All sensors are only power by external power source. If external power source is off. All sensor won't work.
578 -)))
591 +All sensors are only power by external power source. If external power source is off. All sensor won’t work.
579 579  
580 -(((
593 +
581 581  Main Process Unit WSC1-L is powered by both external power source and internal 1000mAh rechargeable battery. If external power source is off, WSC1-L still runs and can send periodically uplinks, but the sensors value will become invalid.  External power source can recharge the 1000mAh rechargeable battery.
582 -)))
583 583  
584 584  
597 +
585 585  = 5. Main Process Unit WSC1-L =
586 586  
587 587  == 5.1 Features ==
... ... @@ -603,6 +603,7 @@
603 603  WSC1-L (without external sensor): Idle: 4mA, Transmit: max 40mA
604 604  
605 605  
619 +
606 606  == 5.3 Storage & Operation Temperature ==
607 607  
608 608  -20°C to +60°C
... ... @@ -610,7 +610,7 @@
610 610  
611 611  == 5.4 Pin Mapping ==
612 612  
613 -[[image:1656054149793-239.png]]
627 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.png]]
614 614  
615 615  
616 616  == 5.5 Mechanical ==
... ... @@ -618,12 +618,14 @@
618 618  Refer LSn50v2 enclosure drawing in: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Mechanical_Drawing/>>url:https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Mechanical_Drawing/]]
619 619  
620 620  
635 +
636 +
621 621  == 5.6 Connect to RS485 Sensors ==
622 622  
623 623  WSC1-L includes a RS485 converter PCB. Which help it easy to connect multiply RS485 sensors. Below is the photo for reference.
624 624  
625 625  
626 -[[image:1656054389031-379.png]]
642 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]]
627 627  
628 628  
629 629  Hardware Design for the Converter Board please see:
... ... @@ -631,22 +631,37 @@
631 631  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/RS485_Converter_Board/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/RS485_Converter_Board/]]
632 632  
633 633  
650 +
651 +
652 +
634 634  = 6. Weather Sensors =
635 635  
636 636  == 6.1 Rain Gauge ~-~- WSS-01 ==
637 637  
638 -
639 639  WSS-01 RS485 Rain Gauge is used in meteorology and hydrology to gather and measure the amount of liquid precipitation (mainly rainfall) over an area.
640 640  
641 -WSS-01 uses a tipping bucket to detect rainfall. The tipping bucket use 3D streamline shape to make sure it works smoothly and is easy to clean.
642 642  
643 -WSS-01 is designed to support the Dragino Weather station solution. Users only need to connect WSS-01 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload the rainfall to the IoT Server via wireless LoRaWAN protocol
660 +WSS-01 uses a tipping bucket to detect rainfall. The tipping bucket use 3D streamline
644 644  
645 -The tipping bucket of WSS-01 is adjusted to the best angle. When installation, user only needs to screw up and adjust the bottom horizontally.
662 +shape to make sure it works smoothly and is easy to clean.
646 646  
664 +
665 +WSS-01 is designed to support the Dragino Weather station solution.
666 +
667 +Users only need to connect WSS-01 RS485 interface to WSC1-L. The weather station main
668 +
669 +processor WSC1-L can detect and upload the rainfall to the IoT Server via wireless LoRaWAN protocol
670 +
671 +
672 +The tipping bucket of WSS-01 is adjusted to the best angle. When installation, user only needs
673 +
674 +to screw up and adjust the bottom horizontally.
675 +
676 +
647 647  WSS-01 package includes screw which can be installed to ground. If user want to install WSS-01 on pole, they can purchase WS-K2 bracket kit.
648 648  
649 649  
680 +
650 650  === 6.1.1 Feature ===
651 651  
652 652  * RS485 Rain Gauge
... ... @@ -655,9 +655,6 @@
655 655  * ABS enclosure.
656 656  * Horizontal adjustable.
657 657  
658 -
659 -
660 -
661 661  === 6.1.2 Specification ===
662 662  
663 663  * Resolution: 0.2mm
... ... @@ -669,19 +669,18 @@
669 669  * Working Humidity: <100% (no dewing)
670 670  * Power Consumption: 4mA @ 12v.
671 671  
672 -
673 -
674 -
675 675  === 6.1.3 Dimension ===
676 676  
677 - [[image:1656054957406-980.png]]
702 + [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.jpg||alt="c2d3aee592ccc873bea6dd891451df2"]]
678 678  
679 679  
680 680  === 6.1.4 Pin Mapping ===
681 681  
682 -[[image:1656054972828-692.png]]
707 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
683 683  
684 684  
710 +
711 +
685 685  === 6.1.5 Installation Notice ===
686 686  
687 687  Do not power on while connect the cables. Double check the wiring before power on.
... ... @@ -698,17 +698,19 @@
698 698  
699 699  If user want to install on pole, they can purchase the (% style="color:#4472c4" %)** WS-K2 :  Bracket Kit for Pole installation**(%%), and install as below:
700 700  
701 -[[image:image-20220624152218-1.png||height="526" width="276"]]
728 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]]
702 702  
703 -WS-K2: Bracket Kit for Pole installation
704 704  
731 +WS-K2: Bracket Kit for Pole installation:
705 705  
733 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]
706 706  
707 707  WSSC-K2 dimension document, please see:
708 708  
709 -[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/]]
737 +https:~/~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/ 
710 710  
711 711  
740 +
712 712  == 6.2 Wind Speed/Direction ~-~- WSS-02 ==
713 713  
714 714  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]
... ... @@ -729,9 +729,6 @@
729 729  * RS485 wind speed / direction sensor
730 730  * PC enclosure, resist corrosion
731 731  
732 -
733 -
734 -
735 735  === 6.2.2 Specification ===
736 736  
737 737  * Wind speed range: 0 ~~ 30m/s, (always show 30m/s for higher speed)
... ... @@ -745,9 +745,6 @@
745 745  * Power Consumption: 13mA ~~ 12v.
746 746  * Cable Length: 2 meters
747 747  
748 -
749 -
750 -
751 751  === 6.2.3 Dimension ===
752 752  
753 753  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.jpg]][[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.jpg]]
... ... @@ -805,9 +805,6 @@
805 805  * NDIR to measure CO2 with Internal Temperature Compensation
806 806  * Laser Beam Scattering to PM2.5 and PM10
807 807  
808 -
809 -
810 -
811 811  === 6.3.2 Specification ===
812 812  
813 813  * CO2 Range: 0～5000ppm, accuracy: ±3%F•S（25℃）
... ... @@ -825,9 +825,6 @@
825 825  ** CO2: 0～95%RH
826 826  * Power Consumption: 50mA@ 12v.
827 827  
828 -
829 -
830 -
831 831  === 6.3.3 Dimension ===
832 832  
833 833  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]
... ... @@ -873,9 +873,6 @@
873 873  * Surface heating to dry
874 874  * grid electrode uses Electroless Nickel/Immersion Gold design for resist corrosion
875 875  
876 -
877 -
878 -
879 879  === 6.4.2 Specification ===
880 880  
881 881  * Detect if there is rain or snow
... ... @@ -887,9 +887,6 @@
887 887  ** No heating: 12mA @ 12v,
888 888  ** heating: 94ma @ 12v.
889 889  
890 -
891 -
892 -
893 893  === 6.4.3 Dimension ===
894 894  
895 895  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]
... ... @@ -939,9 +939,6 @@
939 939  
940 940  * RS485 Temperature, Humidity, Illuminance, Pressure sensor
941 941  
942 -
943 -
944 -
945 945  === 6.5.2 Specification ===
946 946  
947 947  * Input Power: DC 12 ~~ 24v
... ... @@ -966,9 +966,6 @@
966 966  * Working Humidity: 10～90%RH
967 967  * Power Consumption: 4mA @ 12v
968 968  
969 -
970 -
971 -
972 972  === 6.5.3 Dimension ===
973 973  
974 974  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image034.jpg]]
... ... @@ -1014,9 +1014,6 @@
1014 1014  * Measure Total Radiation between 0.3～3μm（300～3000nm）
1015 1015  * Measure Reflected Radiation if sense area towards ground.
1016 1016  
1017 -
1018 -
1019 -
1020 1020  === 6.6.2 Specification ===
1021 1021  
1022 1022  * Input Power: DC 5 ~~ 24v
... ... @@ -1032,9 +1032,6 @@
1032 1032  * Working Humidity: 10～90%RH
1033 1033  * Power Consumption: 4mA @ 12v
1034 1034  
1035 -
1036 -
1037 -
1038 1038  === 6.6.3 Dimension ===
1039 1039  
1040 1040  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]]
... ... @@ -1092,9 +1092,6 @@
1092 1092  * Working Humidity: 10～90%RH
1093 1093  * Power Consumption: 3mA @ 12v
1094 1094  
1095 -
1096 -
1097 -
1098 1098  === 6.7.3 Dimension ===
1099 1099  
1100 1100  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]]
... ... @@ -1164,22 +1164,19 @@
1164 1164  
1165 1165  == 9.1 Main Process Unit ==
1166 1166  
1167 -Part Number: (% style="color:blue" %)**WSC1-L-XX**
1163 +Part Number: **WSC1-L-XX**
1168 1168  
1169 -(% style="color:blue" %)**XX**(%%): The default frequency band
1165 +**XX**: The default frequency band
1170 1170  
1171 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1172 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1173 -* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
1174 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1175 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1176 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1177 -* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
1178 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1167 +* **AS923**: LoRaWAN AS923 band
1168 +* **AU915**: LoRaWAN AU915 band
1169 +* **EU433**: LoRaWAN EU433 band
1170 +* **EU868**: LoRaWAN EU868 band
1171 +* **KR920**: LoRaWAN KR920 band
1172 +* **US915**: LoRaWAN US915 band
1173 +* **IN865**: LoRaWAN IN865 band
1174 +* **CN470**: LoRaWAN CN470 band
1179 1179  
1180 -
1181 -
1182 -
1183 1183  == 9.2 Sensors ==
1184 1184  
1185 1185  |**Sensor Model**|**Part Number**
... ... @@ -1192,7 +1192,6 @@
1192 1192  |**Total Solar Radiation Sensor**|WSS-06
1193 1193  |**PAR (Photosynthetically Available Radiation)**|WSS-07
1194 1194  
1195 -
1196 1196  = 10. Support =
1197 1197  
1198 1198  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1656054149793-239.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -492.6 KB
Content
1656054389031-379.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.3 MB
Content
1656054957406-980.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
1656054972828-692.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -322.6 KB
Content
1656055150738-931.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -360.7 KB
Content
1656055172658-283.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -277.2 KB
Content
image-20220624152218-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -194.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0