Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 0 added, 1 removed)
  • 1656054149793-239.png

Details

Page properties

Content

...	...	@@ -77,6 +77,10 @@
77	77	* Mounting Kit includes pole and mast assembly. Each weather sensor has it’s own mounting assembly, user can check the sensor section in this manual.
78	78	* Cabinet.
79	79
	80	+
	81	+
	82	+
	83	+
80	80	== 2.2 How it works? ==
81	81
82	82	(((
...	...	@@ -94,6 +94,10 @@
94	94	1. WSC1-L will auto scan available weather sensors when power on or reboot.
95	95	1. User can send a downlink command to WSC1-L to do a re-scan on the available sensors.
96	96
	101	+
	102	+
	103	+
	104	+
97	97	== 2.3 Example to use for LoRaWAN network ==
98	98
99	99	This section shows an example for how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.
...	...	@@ -396,6 +396,7 @@
396	396	* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
397	397
398	398
	407	+
399	399	== 3.2 Set Emergency Mode ==
400	400
401	401	Feature: In emergency mode, WSC1-L will uplink data every 1 minute.
...	...	@@ -411,6 +411,7 @@
411	411	* 0xE100     Same as: AT+ALARMMOD=0
412	412
413	413
	423	+
414	414	== 3.3 Add or Delete RS485 Sensor ==
415	415
416	416	Feature: User can add or delete 3^^rd^^ party sensor as long they are RS485/Modbus interface,baud rate support 9600.Maximum can add 4 sensors.
...	...	@@ -427,6 +427,7 @@
427	427	* has_CRC:  RS485 Response crc check  (0: no verification required 1: verification required). If CRC=1 and CRC error, valid data will be set to 0.
428	428	* timeout:  RS485 receive timeout (uint:ms). Device will close receive window after timeout
429	429
	440	+
430	430	**Example:**
431	431
432	432	User need to change external sensor use the type code as address code.
...	...	@@ -451,6 +451,7 @@
451	451	* has_CRC: 1
452	452	* timeout: 1500 (Fill in the test according to the actual situation)
453	453
	465	+
454	454	**So the input command is:**
455	455
456	456	AT+DYSENSOR=A1,8,A103000000019CAA,8,24,1,1500
...	...	@@ -480,6 +480,7 @@
480	480	* 0xE5FF
481	481
482	482
	495	+
483	483	== 3.4 RS485 Test Command ==
484	484
485	485	(% style="color:#037691" %)**AT Command:**
...	...	@@ -502,6 +502,7 @@
502	502	* 0xE20103000001840A     Same as: AT+RSWRITE=0103000001840A
503	503
504	504
	518	+
505	505	== 3.5 RS485 response timeout ==
506	506
507	507	Feature: Set or get extended time to receive 485 sensor data.
...	...	@@ -516,6 +516,7 @@
516	516	Range : 0~~10000
517	517	)))|(% style="width:85px" %)OK
518	518
	533	+
519	519	(% style="color:#037691" %)**Downlink Command:**
520	520
521	521	Format: Command Code (0xE0) followed by 3 bytes time value.
...	...	@@ -526,6 +526,7 @@
526	526	* Example 2: Downlink Payload: E000000A ~/~/ Set Transmit Interval (DTR) = 10 seconds
527	527
528	528
	544	+
529	529	== 3.6 Set Sensor Type ==
530	530
531	531	Feature: Set sensor in used. If there are 6 sensors, user can set to only send 5 sensors values.
...	...	@@ -535,6 +535,7 @@
535	535	[[image:image-20220624144904-12.png]]
536	536
537	537
	554	+
538	538	(% style="color:#037691" %)**AT Command:**
539	539
540	540	(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:377px" %)
...	...	@@ -541,6 +541,7 @@
541	541	|=(% style="width: 157px;" %)**Command Example**|=(% style="width: 130px;" %)**Function**|=(% style="width: 87px;" %)**Response**
542	542	|(% style="width:157px" %)AT+STYPE=80221|(% style="width:130px" %)Set sensor types|(% style="width:87px" %)OK
543	543
	561	+
544	544	Eg: The setting command **AT+STYPE=802212** means:
545	545
546	546	(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:495px" %)
...	...	@@ -577,17 +577,16 @@
577	577	The main process unit WSC1-L is set to LoRaWAN Class C by default. If user want to reduce the power consumption of this unit, user can set it to run in Class A. In Class A mode, WSC1-L will not be to get real-time downlink command from IoT Server.
578	578
579	579
	598	+
580	580	== 4.3 Battery ==
581	581
582		-(((
583		-All sensors are only power by external power source. If external power source is off. All sensor won't work.
584		-)))
	601	+All sensors are only power by external power source. If external power source is off. All sensor won’t work.
585	585
586		-(((
	603	+
587	587	Main Process Unit WSC1-L is powered by both external power source and internal 1000mAh rechargeable battery. If external power source is off, WSC1-L still runs and can send periodically uplinks, but the sensors value will become invalid.  External power source can recharge the 1000mAh rechargeable battery.
588		-)))
589	589
590	590
	607	+
591	591	= 5. Main Process Unit WSC1-L =
592	592
593	593	== 5.1 Features ==
...	...	@@ -604,12 +604,12 @@
604	604	* IP Rating: IP65
605	605	* Support default sensors or 3rd party RS485 sensors
606	606
607		-
608	608	== 5.2 Power Consumption ==
609	609
610	610	WSC1-L (without external sensor): Idle: 4mA, Transmit: max 40mA
611	611
612	612
	629	+
613	613	== 5.3 Storage & Operation Temperature ==
614	614
615	615	-20°C to +60°C
...	...	@@ -617,7 +617,7 @@
617	617
618	618	== 5.4 Pin Mapping ==
619	619
620		-[[image:1656054149793-239.png]]
	637	+[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.png]]
621	621
622	622
623	623	== 5.5 Mechanical ==

1656054149793-239.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-492.6 KB

Content