Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -80,7 +80,6 @@
80	80
81	81
82	82
83		-
84	84	== 2.2 How it works? ==
85	85
86	86	(((
...	...	@@ -101,7 +101,6 @@
101	101
102	102
103	103
104		-
105	105	== 2.3 Example to use for LoRaWAN network ==
106	106
107	107	This section shows an example for how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.
...	...	@@ -160,7 +160,6 @@
160	160
161	161
162	162
163		-
164	164	=== 2.4.1 Uplink FPORT~=5, Device Status ===
165	165
166	166	Uplink the device configures with FPORT=5. Once WSC1-L Joined the network, it will uplink this message to the server. After first uplink, WSC1-L will uplink Device Status every 12 hours
...	...	@@ -385,6 +385,7 @@
385	385	These commands only valid for WSC1-L, as below:
386	386
387	387
	385	+
388	388	== 3.1 Set Transmit Interval Time ==
389	389
390	390	Feature: Change LoRaWAN End Node Transmit Interval.
...	...	@@ -405,6 +405,8 @@
405	405
406	406
407	407
	406	+
	407	+
408	408	== 3.2 Set Emergency Mode ==
409	409
410	410	Feature: In emergency mode, WSC1-L will uplink data every 1 minute.
...	...	@@ -421,6 +421,8 @@
421	421
422	422
423	423
	424	+
	425	+
424	424	== 3.3 Add or Delete RS485 Sensor ==
425	425
426	426	Feature: User can add or delete 3^^rd^^ party sensor as long they are RS485/Modbus interface,baud rate support 9600.Maximum can add 4 sensors.
...	...	@@ -437,7 +437,6 @@
437	437	* has_CRC:  RS485 Response crc check  (0: no verification required 1: verification required). If CRC=1 and CRC error, valid data will be set to 0.
438	438	* timeout:  RS485 receive timeout (uint:ms). Device will close receive window after timeout
439	439
440		-
441	441	**Example:**
442	442
443	443	User need to change external sensor use the type code as address code.
...	...	@@ -462,7 +462,6 @@
462	462	* has_CRC: 1
463	463	* timeout: 1500 (Fill in the test according to the actual situation)
464	464
465		-
466	466	**So the input command is:**
467	467
468	468	AT+DYSENSOR=A1,8,A103000000019CAA,8,24,1,1500
...	...	@@ -493,6 +493,8 @@
493	493
494	494
495	495
	496	+
	497	+
496	496	== 3.4 RS485 Test Command ==
497	497
498	498	(% style="color:#037691" %)**AT Command:**
...	...	@@ -516,6 +516,8 @@
516	516
517	517
518	518
	521	+
	522	+
519	519	== 3.5 RS485 response timeout ==
520	520
521	521	Feature: Set or get extended time to receive 485 sensor data.
...	...	@@ -530,7 +530,6 @@
530	530	Range : 0~~10000
531	531	)))|(% style="width:85px" %)OK
532	532
533		-
534	534	(% style="color:#037691" %)**Downlink Command:**
535	535
536	536	Format: Command Code (0xE0) followed by 3 bytes time value.
...	...	@@ -542,11 +542,13 @@
542	542
543	543
544	544
	548	+
	549	+
545	545	== 3.6 Set Sensor Type ==
546	546
547	547	Feature: Set sensor in used. If there are 6 sensors, user can set to only send 5 sensors values.
548	548
549		-See [[definition>>||anchor="H"]] for the sensor type.
	554	+See [[definition>>||anchor="HWeatherSensorTypes:"]] for the sensor type.
550	550
551	551	[[image:image-20220624144904-12.png]]
552	552
...	...	@@ -558,7 +558,6 @@
558	558	|=(% style="width: 157px;" %)**Command Example**|=(% style="width: 130px;" %)**Function**|=(% style="width: 87px;" %)**Response**
559	559	|(% style="width:157px" %)AT+STYPE=80221|(% style="width:130px" %)Set sensor types|(% style="width:87px" %)OK
560	560
561		-
562	562	Eg: The setting command **AT+STYPE=802212** means:
563	563
564	564	(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:495px" %)
...	...	@@ -595,13 +595,15 @@
595	595	The main process unit WSC1-L is set to LoRaWAN Class C by default. If user want to reduce the power consumption of this unit, user can set it to run in Class A. In Class A mode, WSC1-L will not be to get real-time downlink command from IoT Server.
596	596
597	597
598		-
599	599	== 4.3 Battery ==
600	600
601		-All sensors are only power by external power source. If external power source is off. All sensor won’t work.
	604	+(((
	605	+All sensors are only power by external power source. If external power source is off. All sensor won't work.
	606	+)))
602	602
603		-
	608	+(((
604	604	Main Process Unit WSC1-L is powered by both external power source and internal 1000mAh rechargeable battery. If external power source is off, WSC1-L still runs and can send periodically uplinks, but the sensors value will become invalid.  External power source can recharge the 1000mAh rechargeable battery.
	610	+)))
605	605
606	606
607	607
...	...	@@ -621,6 +621,10 @@
621	621	* IP Rating: IP65
622	622	* Support default sensors or 3rd party RS485 sensors
623	623
	630	+
	631	+
	632	+
	633	+
624	624	== 5.2 Power Consumption ==
625	625
626	626	WSC1-L (without external sensor): Idle: 4mA, Transmit: max 40mA