Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -77,6 +77,9 @@
77	77	* Mounting Kit includes pole and mast assembly. Each weather sensor has it’s own mounting assembly, user can check the sensor section in this manual.
78	78	* Cabinet.
79	79
	80	+
	81	+
	82	+
80	80	== 2.2 How it works? ==
81	81
82	82	(((
...	...	@@ -94,6 +94,9 @@
94	94	1. WSC1-L will auto scan available weather sensors when power on or reboot.
95	95	1. User can send a downlink command to WSC1-L to do a re-scan on the available sensors.
96	96
	100	+
	101	+
	102	+
97	97	== 2.3 Example to use for LoRaWAN network ==
98	98
99	99	This section shows an example for how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.
...	...	@@ -150,6 +150,8 @@
150	150	* Valid Sensor Value: Use FPORT=2
151	151	* Other control command: Use FPORT other than 2.
152	152
	159	+
	160	+
153	153	=== 2.4.1 Uplink FPORT~=5, Device Status ===
154	154
155	155	Uplink the device configures with FPORT=5. Once WSC1-L Joined the network, it will uplink this message to the server. After first uplink, WSC1-L will uplink Device Status every 12 hours
...	...	@@ -393,7 +393,6 @@
393	393	* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
394	394
395	395
396		-
397	397	== 3.2 Set Emergency Mode ==
398	398
399	399	Feature: In emergency mode, WSC1-L will uplink data every 1 minute.
...	...	@@ -409,7 +409,6 @@
409	409	* 0xE100     Same as: AT+ALARMMOD=0
410	410
411	411
412		-
413	413	== 3.3 Add or Delete RS485 Sensor ==
414	414
415	415	Feature: User can add or delete 3^^rd^^ party sensor as long they are RS485/Modbus interface,baud rate support 9600.Maximum can add 4 sensors.
...	...	@@ -426,7 +426,6 @@
426	426	* has_CRC:  RS485 Response crc check  (0: no verification required 1: verification required). If CRC=1 and CRC error, valid data will be set to 0.
427	427	* timeout:  RS485 receive timeout (uint:ms). Device will close receive window after timeout
428	428
429		-
430	430	**Example:**
431	431
432	432	User need to change external sensor use the type code as address code.
...	...	@@ -451,7 +451,6 @@
451	451	* has_CRC: 1
452	452	* timeout: 1500 (Fill in the test according to the actual situation)
453	453
454		-
455	455	**So the input command is:**
456	456
457	457	AT+DYSENSOR=A1,8,A103000000019CAA,8,24,1,1500
...	...	@@ -481,7 +481,6 @@
481	481	* 0xE5FF
482	482
483	483
484		-
485	485	== 3.4 RS485 Test Command ==
486	486
487	487	(% style="color:#037691" %)**AT Command:**
...	...	@@ -504,7 +504,6 @@
504	504	* 0xE20103000001840A     Same as: AT+RSWRITE=0103000001840A
505	505
506	506
507		-
508	508	== 3.5 RS485 response timeout ==
509	509
510	510	Feature: Set or get extended time to receive 485 sensor data.
...	...	@@ -519,7 +519,6 @@
519	519	Range : 0~~10000
520	520	)))|(% style="width:85px" %)OK
521	521
522		-
523	523	(% style="color:#037691" %)**Downlink Command:**
524	524
525	525	Format: Command Code (0xE0) followed by 3 bytes time value.
...	...	@@ -530,12 +530,11 @@
530	530	* Example 2: Downlink Payload: E000000A ~/~/ Set Transmit Interval (DTR) = 10 seconds
531	531
532	532
533		-
534	534	== 3.6 Set Sensor Type ==
535	535
536	536	Feature: Set sensor in used. If there are 6 sensors, user can set to only send 5 sensors values.
537	537
538		-See [[definition>>||anchor="H"]] for the sensor type.
	538	+See [[definition>>||anchor="HWeatherSensorTypes:"]] for the sensor type.
539	539
540	540	[[image:image-20220624144904-12.png]]
541	541
...	...	@@ -547,7 +547,6 @@
547	547	|=(% style="width: 157px;" %)**Command Example**|=(% style="width: 130px;" %)**Function**|=(% style="width: 87px;" %)**Response**
548	548	|(% style="width:157px" %)AT+STYPE=80221|(% style="width:130px" %)Set sensor types|(% style="width:87px" %)OK
549	549
550		-
551	551	Eg: The setting command **AT+STYPE=802212** means:
552	552
553	553	(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:495px" %)
...	...	@@ -567,12 +567,11 @@
567	567
568	568	(% style="color:red" %)**Note:**
569	569
570		-~1. The sensor type will not be saved to flash, and the value will be updated every time the sensor is restarted or rescanned
	569	+~1. The sensor type will not be saved to flash, and the value will be updated every time the sensor is restarted or rescanned.
571	571
572	572
573	573
574	574
575		-
576	576	= 4. Power consumption and battery =
577	577
578	578	== 4.1 Total Power Consumption ==
...	...	@@ -585,13 +585,15 @@
585	585	The main process unit WSC1-L is set to LoRaWAN Class C by default. If user want to reduce the power consumption of this unit, user can set it to run in Class A. In Class A mode, WSC1-L will not be to get real-time downlink command from IoT Server.
586	586
587	587
588		-
589	589	== 4.3 Battery ==
590	590
591		-All sensors are only power by external power source. If external power source is off. All sensor won’t work.
	588	+(((
	589	+All sensors are only power by external power source. If external power source is off. All sensor won't work.
	590	+)))
592	592
593		-
	592	+(((
594	594	Main Process Unit WSC1-L is powered by both external power source and internal 1000mAh rechargeable battery. If external power source is off, WSC1-L still runs and can send periodically uplinks, but the sensors value will become invalid.  External power source can recharge the 1000mAh rechargeable battery.
	594	+)))
595	595
596	596
597	597
...	...	@@ -611,6 +611,10 @@
611	611	* IP Rating: IP65
612	612	* Support default sensors or 3rd party RS485 sensors
613	613
	614	+
	615	+
	616	+
	617	+
614	614	== 5.2 Power Consumption ==
615	615
616	616	WSC1-L (without external sensor): Idle: 4mA, Transmit: max 40mA