Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -77,6 +77,7 @@
77	77	* Mounting Kit includes pole and mast assembly. Each weather sensor has it’s own mounting assembly, user can check the sensor section in this manual.
78	78	* Cabinet.
79	79
	80	+
80	80	== 2.2 How it works? ==
81	81
82	82	(((
...	...	@@ -94,6 +94,7 @@
94	94	1. WSC1-L will auto scan available weather sensors when power on or reboot.
95	95	1. User can send a downlink command to WSC1-L to do a re-scan on the available sensors.
96	96
	98	+
97	97	== 2.3 Example to use for LoRaWAN network ==
98	98
99	99	This section shows an example for how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.
...	...	@@ -153,6 +153,7 @@
153	153
154	154
155	155
	158	+
156	156	=== 2.4.1 Uplink FPORT~=5, Device Status ===
157	157
158	158	Uplink the device configures with FPORT=5. Once WSC1-L Joined the network, it will uplink this message to the server. After first uplink, WSC1-L will uplink Device Status every 12 hours
...	...	@@ -377,6 +377,7 @@
377	377	These commands only valid for WSC1-L, as below:
378	378
379	379
	383	+
380	380	== 3.1 Set Transmit Interval Time ==
381	381
382	382	Feature: Change LoRaWAN End Node Transmit Interval.
...	...	@@ -396,6 +396,7 @@
396	396	* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
397	397
398	398
	403	+
399	399	== 3.2 Set Emergency Mode ==
400	400
401	401	Feature: In emergency mode, WSC1-L will uplink data every 1 minute.
...	...	@@ -411,6 +411,7 @@
411	411	* 0xE100     Same as: AT+ALARMMOD=0
412	412
413	413
	419	+
414	414	== 3.3 Add or Delete RS485 Sensor ==
415	415
416	416	Feature: User can add or delete 3^^rd^^ party sensor as long they are RS485/Modbus interface,baud rate support 9600.Maximum can add 4 sensors.
...	...	@@ -427,6 +427,7 @@
427	427	* has_CRC:  RS485 Response crc check  (0: no verification required 1: verification required). If CRC=1 and CRC error, valid data will be set to 0.
428	428	* timeout:  RS485 receive timeout (uint:ms). Device will close receive window after timeout
429	429
	436	+
430	430	**Example:**
431	431
432	432	User need to change external sensor use the type code as address code.
...	...	@@ -480,6 +480,7 @@
480	480	* 0xE5FF
481	481
482	482
	490	+
483	483	== 3.4 RS485 Test Command ==
484	484
485	485	(% style="color:#037691" %)**AT Command:**
...	...	@@ -502,6 +502,7 @@
502	502	* 0xE20103000001840A     Same as: AT+RSWRITE=0103000001840A
503	503
504	504
	513	+
505	505	== 3.5 RS485 response timeout ==
506	506
507	507	Feature: Set or get extended time to receive 485 sensor data.
...	...	@@ -526,6 +526,7 @@
526	526	* Example 2: Downlink Payload: E000000A ~/~/ Set Transmit Interval (DTR) = 10 seconds
527	527
528	528
	538	+
529	529	== 3.6 Set Sensor Type ==
530	530
531	531	Feature: Set sensor in used. If there are 6 sensors, user can set to only send 5 sensors values.
...	...	@@ -606,6 +606,7 @@
606	606	* Support default sensors or 3rd party RS485 sensors
607	607
608	608
	619	+
609	609	== 5.2 Power Consumption ==
610	610
611	611	WSC1-L (without external sensor): Idle: 4mA, Transmit: max 40mA