Last modified by Xiaoling on 2025/04/25 09:08
<
From version < 32.12 >
edited by Xiaoling
on 2022/06/24 15:00
To version < 34.5 >
edited by Xiaoling
on 2022/06/24 15:14
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -77,7 +77,6 @@
77 77  * Mounting Kit includes pole and mast assembly. Each weather sensor has it’s own mounting assembly, user can check the sensor section in this manual.
78 78  * Cabinet.
79 79  
80 -
81 81  == 2.2 How it works? ==
82 82  
83 83  (((
... ... @@ -95,7 +95,6 @@
95 95  1. WSC1-L will auto scan available weather sensors when power on or reboot.
96 96  1. User can send a downlink command to WSC1-L to do a re-scan on the available sensors.
97 97  
98 -
99 99  == 2.3 Example to use for LoRaWAN network ==
100 100  
101 101  This section shows an example for how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.
... ... @@ -155,7 +155,6 @@
155 155  
156 156  
157 157  
158 -
159 159  === 2.4.1 Uplink FPORT~=5, Device Status ===
160 160  
161 161  Uplink the device configures with FPORT=5. Once WSC1-L Joined the network, it will uplink this message to the server. After first uplink, WSC1-L will uplink Device Status every 12 hours
... ... @@ -380,7 +380,6 @@
380 380  These commands only valid for WSC1-L, as below:
381 381  
382 382  
383 -
384 384  == 3.1 Set Transmit Interval Time ==
385 385  
386 386  Feature: Change LoRaWAN End Node Transmit Interval.
... ... @@ -400,7 +400,6 @@
400 400  * Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
401 401  
402 402  
403 -
404 404  == 3.2 Set Emergency Mode ==
405 405  
406 406  Feature: In emergency mode, WSC1-L will uplink data every 1 minute.
... ... @@ -416,7 +416,6 @@
416 416  * 0xE100     Same as: AT+ALARMMOD=0
417 417  
418 418  
419 -
420 420  == 3.3 Add or Delete RS485 Sensor ==
421 421  
422 422  Feature: User can add or delete 3^^rd^^ party sensor as long they are RS485/Modbus interface,baud rate support 9600.Maximum can add 4 sensors.
... ... @@ -433,7 +433,6 @@
433 433  * has_CRC:  RS485 Response crc check  (0: no verification required 1: verification required). If CRC=1 and CRC error, valid data will be set to 0.
434 434  * timeout:  RS485 receive timeout (uint:ms). Device will close receive window after timeout
435 435  
436 -
437 437  **Example:**
438 438  
439 439  User need to change external sensor use the type code as address code.
... ... @@ -487,7 +487,6 @@
487 487  * 0xE5FF  
488 488  
489 489  
490 -
491 491  == 3.4 RS485 Test Command ==
492 492  
493 493  (% style="color:#037691" %)**AT Command:**
... ... @@ -510,7 +510,6 @@
510 510  * 0xE20103000001840A     Same as: AT+RSWRITE=0103000001840A
511 511  
512 512  
513 -
514 514  == 3.5 RS485 response timeout ==
515 515  
516 516  Feature: Set or get extended time to receive 485 sensor data.
... ... @@ -535,7 +535,6 @@
535 535  * Example 2: Downlink Payload: E000000A ~/~/ Set Transmit Interval (DTR) = 10 seconds
536 536  
537 537  
538 -
539 539  == 3.6 Set Sensor Type ==
540 540  
541 541  Feature: Set sensor in used. If there are 6 sensors, user can set to only send 5 sensors values.
... ... @@ -598,7 +598,6 @@
598 598  )))
599 599  
600 600  
601 -
602 602  = 5. Main Process Unit WSC1-L =
603 603  
604 604  == 5.1 Features ==
... ... @@ -616,13 +616,11 @@
616 616  * Support default sensors or 3rd party RS485 sensors
617 617  
618 618  
619 -
620 620  == 5.2 Power Consumption ==
621 621  
622 622  WSC1-L (without external sensor): Idle: 4mA, Transmit: max 40mA
623 623  
624 624  
625 -
626 626  == 5.3 Storage & Operation Temperature ==
627 627  
628 628  -20°C to +60°C
... ... @@ -630,7 +630,7 @@
630 630  
631 631  == 5.4 Pin Mapping ==
632 632  
633 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.png]]
620 +[[image:1656054149793-239.png]]
634 634  
635 635  
636 636  == 5.5 Mechanical ==
... ... @@ -638,14 +638,12 @@
638 638  Refer LSn50v2 enclosure drawing in: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Mechanical_Drawing/>>url:https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Mechanical_Drawing/]]
639 639  
640 640  
641 -
642 -
643 643  == 5.6 Connect to RS485 Sensors ==
644 644  
645 645  WSC1-L includes a RS485 converter PCB. Which help it easy to connect multiply RS485 sensors. Below is the photo for reference.
646 646  
647 647  
648 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]]
633 +[[image:1656054389031-379.png]]
649 649  
650 650  
651 651  Hardware Design for the Converter Board please see:
... ... @@ -653,37 +653,22 @@
653 653  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/RS485_Converter_Board/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/RS485_Converter_Board/]]
654 654  
655 655  
656 -
657 -
658 -
659 659  = 6. Weather Sensors =
660 660  
661 661  == 6.1 Rain Gauge ~-~- WSS-01 ==
662 662  
645 +
663 663  WSS-01 RS485 Rain Gauge is used in meteorology and hydrology to gather and measure the amount of liquid precipitation (mainly rainfall) over an area.
664 664  
648 +WSS-01 uses a tipping bucket to detect rainfall. The tipping bucket use 3D streamline shape to make sure it works smoothly and is easy to clean.
665 665  
666 -WSS-01 uses a tipping bucket to detect rainfall. The tipping bucket use 3D streamline
650 +WSS-01 is designed to support the Dragino Weather station solution. Users only need to connect WSS-01 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload the rainfall to the IoT Server via wireless LoRaWAN protocol
667 667  
668 -shape to make sure it works smoothly and is easy to clean.
652 +The tipping bucket of WSS-01 is adjusted to the best angle. When installation, user only needs to screw up and adjust the bottom horizontally.
669 669  
670 -
671 -WSS-01 is designed to support the Dragino Weather station solution.
672 -
673 -Users only need to connect WSS-01 RS485 interface to WSC1-L. The weather station main
674 -
675 -processor WSC1-L can detect and upload the rainfall to the IoT Server via wireless LoRaWAN protocol
676 -
677 -
678 -The tipping bucket of WSS-01 is adjusted to the best angle. When installation, user only needs
679 -
680 -to screw up and adjust the bottom horizontally.
681 -
682 -
683 683  WSS-01 package includes screw which can be installed to ground. If user want to install WSS-01 on pole, they can purchase WS-K2 bracket kit.
684 684  
685 685  
686 -
687 687  === 6.1.1 Feature ===
688 688  
689 689  * RS485 Rain Gauge
... ... @@ -692,6 +692,10 @@
692 692  * ABS enclosure.
693 693  * Horizontal adjustable.
694 694  
665 +
666 +
667 +
668 +
695 695  === 6.1.2 Specification ===
696 696  
697 697  * Resolution: 0.2mm
... ... @@ -703,6 +703,10 @@
703 703  * Working Humidity: <100% (no dewing)
704 704  * Power Consumption: 4mA @ 12v.
705 705  
680 +
681 +
682 +
683 +
706 706  === 6.1.3 Dimension ===
707 707  
708 708   [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.jpg||alt="c2d3aee592ccc873bea6dd891451df2"]]
... ... @@ -764,6 +764,10 @@
764 764  * RS485 wind speed / direction sensor
765 765  * PC enclosure, resist corrosion
766 766  
745 +
746 +
747 +
748 +
767 767  === 6.2.2 Specification ===
768 768  
769 769  * Wind speed range: 0 ~~ 30m/s, (always show 30m/s for higher speed)
... ... @@ -777,6 +777,10 @@
777 777  * Power Consumption: 13mA ~~ 12v.
778 778  * Cable Length: 2 meters
779 779  
762 +
763 +
764 +
765 +
780 780  === 6.2.3 Dimension ===
781 781  
782 782  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.jpg]][[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.jpg]]
... ... @@ -834,6 +834,10 @@
834 834  * NDIR to measure CO2 with Internal Temperature Compensation
835 835  * Laser Beam Scattering to PM2.5 and PM10
836 836  
823 +
824 +
825 +
826 +
837 837  === 6.3.2 Specification ===
838 838  
839 839  * CO2 Range: 0～5000ppm, accuracy: ±3%F•S（25℃）
... ... @@ -851,6 +851,10 @@
851 851  ** CO2: 0～95%RH
852 852  * Power Consumption: 50mA@ 12v.
853 853  
844 +
845 +
846 +
847 +
854 854  === 6.3.3 Dimension ===
855 855  
856 856  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]
... ... @@ -896,6 +896,10 @@
896 896  * Surface heating to dry
897 897  * grid electrode uses Electroless Nickel/Immersion Gold design for resist corrosion
898 898  
893 +
894 +
895 +
896 +
899 899  === 6.4.2 Specification ===
900 900  
901 901  * Detect if there is rain or snow
... ... @@ -907,6 +907,10 @@
907 907  ** No heating: 12mA @ 12v,
908 908  ** heating: 94ma @ 12v.
909 909  
908 +
909 +
910 +
911 +
910 910  === 6.4.3 Dimension ===
911 911  
912 912  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]
... ... @@ -956,6 +956,10 @@
956 956  
957 957  * RS485 Temperature, Humidity, Illuminance, Pressure sensor
958 958  
961 +
962 +
963 +
964 +
959 959  === 6.5.2 Specification ===
960 960  
961 961  * Input Power: DC 12 ~~ 24v
... ... @@ -980,6 +980,10 @@
980 980  * Working Humidity: 10～90%RH
981 981  * Power Consumption: 4mA @ 12v
982 982  
989 +
990 +
991 +
992 +
983 983  === 6.5.3 Dimension ===
984 984  
985 985  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image034.jpg]]
... ... @@ -1025,6 +1025,10 @@
1025 1025  * Measure Total Radiation between 0.3～3μm（300～3000nm）
1026 1026  * Measure Reflected Radiation if sense area towards ground.
1027 1027  
1038 +
1039 +
1040 +
1041 +
1028 1028  === 6.6.2 Specification ===
1029 1029  
1030 1030  * Input Power: DC 5 ~~ 24v
... ... @@ -1040,6 +1040,10 @@
1040 1040  * Working Humidity: 10～90%RH
1041 1041  * Power Consumption: 4mA @ 12v
1042 1042  
1057 +
1058 +
1059 +
1060 +
1043 1043  === 6.6.3 Dimension ===
1044 1044  
1045 1045  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]]
... ... @@ -1097,6 +1097,10 @@
1097 1097  * Working Humidity: 10～90%RH
1098 1098  * Power Consumption: 3mA @ 12v
1099 1099  
1118 +
1119 +
1120 +
1121 +
1100 1100  === 6.7.3 Dimension ===
1101 1101  
1102 1102  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]]
... ... @@ -1166,19 +1166,23 @@
1166 1166  
1167 1167  == 9.1 Main Process Unit ==
1168 1168  
1169 -Part Number: **WSC1-L-XX**
1191 +Part Number: **(% style="color:blue" %)WSC1-L-XX**
1170 1170  
1171 -**XX**: The default frequency band
1193 +**(% style="color:blue" %)XX**(%%): The default frequency band
1172 1172  
1173 -* **AS923**: LoRaWAN AS923 band
1174 -* **AU915**: LoRaWAN AU915 band
1175 -* **EU433**: LoRaWAN EU433 band
1176 -* **EU868**: LoRaWAN EU868 band
1177 -* **KR920**: LoRaWAN KR920 band
1178 -* **US915**: LoRaWAN US915 band
1179 -* **IN865**: LoRaWAN IN865 band
1180 -* **CN470**: LoRaWAN CN470 band
1195 +* **(% style="color:red" %)AS923**(%%): LoRaWAN AS923 band
1196 +* **(% style="color:red" %)AU915**(%%): LoRaWAN AU915 band
1197 +* **(% style="color:red" %)EU433**(%%): LoRaWAN EU433 band
1198 +* **(% style="color:red" %)EU868**(%%): LoRaWAN EU868 band
1199 +* **(% style="color:red" %)KR920**(%%): LoRaWAN KR920 band
1200 +* **(% style="color:red" %)US915**(%%): LoRaWAN US915 band
1201 +* **(% style="color:red" %)IN865**(%%): LoRaWAN IN865 band
1202 +* **(% style="color:red" %)CN470**(%%): LoRaWAN CN470 band
1181 1181  
1204 +
1205 +
1206 +
1207 +
1182 1182  == 9.2 Sensors ==
1183 1183  
1184 1184  |**Sensor Model**|**Part Number**
... ... @@ -1191,6 +1191,8 @@
1191 1191  |**Total Solar Radiation Sensor**|WSS-06
1192 1192  |**PAR (Photosynthetically Available Radiation)**|WSS-07
1193 1193  
1220 +
1221 +
1194 1194  = 10. Support =
1195 1195  
1196 1196  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1656054149793-239.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +492.6 KB
Content
1656054389031-379.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.3 MB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0