Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -77,7 +77,6 @@
77	77	* Mounting Kit includes pole and mast assembly. Each weather sensor has it’s own mounting assembly, user can check the sensor section in this manual.
78	78	* Cabinet.
79	79
80		-
81	81	== 2.2 How it works? ==
82	82
83	83	(((
...	...	@@ -95,7 +95,6 @@
95	95	1. WSC1-L will auto scan available weather sensors when power on or reboot.
96	96	1. User can send a downlink command to WSC1-L to do a re-scan on the available sensors.
97	97
98		-
99	99	== 2.3 Example to use for LoRaWAN network ==
100	100
101	101	This section shows an example for how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.
...	...	@@ -155,7 +155,6 @@
155	155
156	156
157	157
158		-
159	159	=== 2.4.1 Uplink FPORT~=5, Device Status ===
160	160
161	161	Uplink the device configures with FPORT=5. Once WSC1-L Joined the network, it will uplink this message to the server. After first uplink, WSC1-L will uplink Device Status every 12 hours
...	...	@@ -380,7 +380,6 @@
380	380	These commands only valid for WSC1-L, as below:
381	381
382	382
383		-
384	384	== 3.1 Set Transmit Interval Time ==
385	385
386	386	Feature: Change LoRaWAN End Node Transmit Interval.
...	...	@@ -400,7 +400,6 @@
400	400	* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
401	401
402	402
403		-
404	404	== 3.2 Set Emergency Mode ==
405	405
406	406	Feature: In emergency mode, WSC1-L will uplink data every 1 minute.
...	...	@@ -416,7 +416,6 @@
416	416	* 0xE100     Same as: AT+ALARMMOD=0
417	417
418	418
419		-
420	420	== 3.3 Add or Delete RS485 Sensor ==
421	421
422	422	Feature: User can add or delete 3^^rd^^ party sensor as long they are RS485/Modbus interface,baud rate support 9600.Maximum can add 4 sensors.
...	...	@@ -433,7 +433,6 @@
433	433	* has_CRC:  RS485 Response crc check  (0: no verification required 1: verification required). If CRC=1 and CRC error, valid data will be set to 0.
434	434	* timeout:  RS485 receive timeout (uint:ms). Device will close receive window after timeout
435	435
436		-
437	437	**Example:**
438	438
439	439	User need to change external sensor use the type code as address code.
...	...	@@ -487,7 +487,6 @@
487	487	* 0xE5FF
488	488
489	489
490		-
491	491	== 3.4 RS485 Test Command ==
492	492
493	493	(% style="color:#037691" %)**AT Command:**
...	...	@@ -510,7 +510,6 @@
510	510	* 0xE20103000001840A     Same as: AT+RSWRITE=0103000001840A
511	511
512	512
513		-
514	514	== 3.5 RS485 response timeout ==
515	515
516	516	Feature: Set or get extended time to receive 485 sensor data.
...	...	@@ -535,7 +535,6 @@
535	535	* Example 2: Downlink Payload: E000000A ~/~/ Set Transmit Interval (DTR) = 10 seconds
536	536
537	537
538		-
539	539	== 3.6 Set Sensor Type ==
540	540
541	541	Feature: Set sensor in used. If there are 6 sensors, user can set to only send 5 sensors values.
...	...	@@ -598,7 +598,6 @@
598	598	)))
599	599
600	600
601		-
602	602	= 5. Main Process Unit WSC1-L =
603	603
604	604	== 5.1 Features ==
...	...	@@ -616,7 +616,6 @@
616	616	* Support default sensors or 3rd party RS485 sensors
617	617
618	618
619		-
620	620	== 5.2 Power Consumption ==
621	621
622	622	WSC1-L (without external sensor): Idle: 4mA, Transmit: max 40mA