Changes for page WSC1-L-Dragino LoRaWAN Weather Station User Manual
Last modified by Xiaoling on 2025/04/25 09:08
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 2 added, 0 removed)
Details
- Page properties
-
- Content
-
... ... @@ -77,8 +77,6 @@ 77 77 * Mounting Kit includes pole and mast assembly. Each weather sensor has it’s own mounting assembly, user can check the sensor section in this manual. 78 78 * Cabinet. 79 79 80 - 81 - 82 82 == 2.2 How it works? == 83 83 84 84 ((( ... ... @@ -96,8 +96,6 @@ 96 96 1. WSC1-L will auto scan available weather sensors when power on or reboot. 97 97 1. User can send a downlink command to WSC1-L to do a re-scan on the available sensors. 98 98 99 - 100 - 101 101 == 2.3 Example to use for LoRaWAN network == 102 102 103 103 This section shows an example for how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure. ... ... @@ -155,6 +155,8 @@ 155 155 * Other control command: Use FPORT other than 2. 156 156 157 157 154 + 155 + 158 158 === 2.4.1 Uplink FPORT~=5, Device Status === 159 159 160 160 Uplink the device configures with FPORT=5. Once WSC1-L Joined the network, it will uplink this message to the server. After first uplink, WSC1-L will uplink Device Status every 12 hours ... ... @@ -379,7 +379,6 @@ 379 379 These commands only valid for WSC1-L, as below: 380 380 381 381 382 - 383 383 == 3.1 Set Transmit Interval Time == 384 384 385 385 Feature: Change LoRaWAN End Node Transmit Interval. ... ... @@ -399,8 +399,6 @@ 399 399 * Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds 400 400 401 401 402 - 403 - 404 404 == 3.2 Set Emergency Mode == 405 405 406 406 Feature: In emergency mode, WSC1-L will uplink data every 1 minute. ... ... @@ -416,8 +416,6 @@ 416 416 * 0xE100 Same as: AT+ALARMMOD=0 417 417 418 418 419 - 420 - 421 421 == 3.3 Add or Delete RS485 Sensor == 422 422 423 423 Feature: User can add or delete 3^^rd^^ party sensor as long they are RS485/Modbus interface,baud rate support 9600.Maximum can add 4 sensors. ... ... @@ -434,8 +434,6 @@ 434 434 * has_CRC: RS485 Response crc check (0: no verification required 1: verification required). If CRC=1 and CRC error, valid data will be set to 0. 435 435 * timeout: RS485 receive timeout (uint:ms). Device will close receive window after timeout 436 436 437 - 438 - 439 439 **Example:** 440 440 441 441 User need to change external sensor use the type code as address code. ... ... @@ -460,7 +460,6 @@ 460 460 * has_CRC: 1 461 461 * timeout: 1500 (Fill in the test according to the actual situation) 462 462 463 - 464 464 **So the input command is:** 465 465 466 466 AT+DYSENSOR=A1,8,A103000000019CAA,8,24,1,1500 ... ... @@ -490,8 +490,6 @@ 490 490 * 0xE5FF 491 491 492 492 493 - 494 - 495 495 == 3.4 RS485 Test Command == 496 496 497 497 (% style="color:#037691" %)**AT Command:** ... ... @@ -514,8 +514,6 @@ 514 514 * 0xE20103000001840A Same as: AT+RSWRITE=0103000001840A 515 515 516 516 517 - 518 - 519 519 == 3.5 RS485 response timeout == 520 520 521 521 Feature: Set or get extended time to receive 485 sensor data. ... ... @@ -530,7 +530,6 @@ 530 530 Range : 0~~10000 531 531 )))|(% style="width:85px" %)OK 532 532 533 - 534 534 (% style="color:#037691" %)**Downlink Command:** 535 535 536 536 Format: Command Code (0xE0) followed by 3 bytes time value. ... ... @@ -541,8 +541,6 @@ 541 541 * Example 2: Downlink Payload: E000000A ~/~/ Set Transmit Interval (DTR) = 10 seconds 542 542 543 543 544 - 545 - 546 546 == 3.6 Set Sensor Type == 547 547 548 548 Feature: Set sensor in used. If there are 6 sensors, user can set to only send 5 sensors values. ... ... @@ -605,7 +605,6 @@ 605 605 ))) 606 606 607 607 608 - 609 609 = 5. Main Process Unit WSC1-L = 610 610 611 611 == 5.1 Features == ... ... @@ -623,14 +623,11 @@ 623 623 * Support default sensors or 3rd party RS485 sensors 624 624 625 625 626 - 627 - 628 628 == 5.2 Power Consumption == 629 629 630 630 WSC1-L (without external sensor): Idle: 4mA, Transmit: max 40mA 631 631 632 632 633 - 634 634 == 5.3 Storage & Operation Temperature == 635 635 636 636 -20°C to +60°C ... ... @@ -638,7 +638,7 @@ 638 638 639 639 == 5.4 Pin Mapping == 640 640 641 -[[image: file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.png]]620 +[[image:1656054149793-239.png]] 642 642 643 643 644 644 == 5.5 Mechanical == ... ... @@ -646,14 +646,12 @@ 646 646 Refer LSn50v2 enclosure drawing in: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Mechanical_Drawing/>>url:https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Mechanical_Drawing/]] 647 647 648 648 649 - 650 - 651 651 == 5.6 Connect to RS485 Sensors == 652 652 653 653 WSC1-L includes a RS485 converter PCB. Which help it easy to connect multiply RS485 sensors. Below is the photo for reference. 654 654 655 655 656 -[[image: file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]]633 +[[image:1656054389031-379.png]] 657 657 658 658 659 659 Hardware Design for the Converter Board please see: ... ... @@ -661,37 +661,22 @@ 661 661 [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/RS485_Converter_Board/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/RS485_Converter_Board/]] 662 662 663 663 664 - 665 - 666 - 667 667 = 6. Weather Sensors = 668 668 669 669 == 6.1 Rain Gauge ~-~- WSS-01 == 670 670 645 + 671 671 WSS-01 RS485 Rain Gauge is used in meteorology and hydrology to gather and measure the amount of liquid precipitation (mainly rainfall) over an area. 672 672 648 +WSS-01 uses a tipping bucket to detect rainfall. The tipping bucket use 3D streamline shape to make sure it works smoothly and is easy to clean. 673 673 674 -WSS-01 usesatippingbucket todetectrainfall. The tippingbucket use3Dstreamline650 +WSS-01 is designed to support the Dragino Weather station solution. Users only need to connect WSS-01 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload the rainfall to the IoT Server via wireless LoRaWAN protocol 675 675 676 - shape tomake sureitworkssmoothlyandiseasy to clean.652 +The tipping bucket of WSS-01 is adjusted to the best angle. When installation, user only needs to screw up and adjust the bottom horizontally. 677 677 678 - 679 -WSS-01 is designed to support the Dragino Weather station solution. 680 - 681 -Users only need to connect WSS-01 RS485 interface to WSC1-L. The weather station main 682 - 683 -processor WSC1-L can detect and upload the rainfall to the IoT Server via wireless LoRaWAN protocol 684 - 685 - 686 -The tipping bucket of WSS-01 is adjusted to the best angle. When installation, user only needs 687 - 688 -to screw up and adjust the bottom horizontally. 689 - 690 - 691 691 WSS-01 package includes screw which can be installed to ground. If user want to install WSS-01 on pole, they can purchase WS-K2 bracket kit. 692 692 693 693 694 - 695 695 === 6.1.1 Feature === 696 696 697 697 * RS485 Rain Gauge ... ... @@ -700,6 +700,10 @@ 700 700 * ABS enclosure. 701 701 * Horizontal adjustable. 702 702 665 + 666 + 667 + 668 + 703 703 === 6.1.2 Specification === 704 704 705 705 * Resolution: 0.2mm ... ... @@ -711,6 +711,10 @@ 711 711 * Working Humidity: <100% (no dewing) 712 712 * Power Consumption: 4mA @ 12v. 713 713 680 + 681 + 682 + 683 + 714 714 === 6.1.3 Dimension === 715 715 716 716 [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.jpg||alt="c2d3aee592ccc873bea6dd891451df2"]] ... ... @@ -772,6 +772,10 @@ 772 772 * RS485 wind speed / direction sensor 773 773 * PC enclosure, resist corrosion 774 774 745 + 746 + 747 + 748 + 775 775 === 6.2.2 Specification === 776 776 777 777 * Wind speed range: 0 ~~ 30m/s, (always show 30m/s for higher speed) ... ... @@ -785,6 +785,10 @@ 785 785 * Power Consumption: 13mA ~~ 12v. 786 786 * Cable Length: 2 meters 787 787 762 + 763 + 764 + 765 + 788 788 === 6.2.3 Dimension === 789 789 790 790 [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.jpg]][[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.jpg]] ... ... @@ -842,6 +842,10 @@ 842 842 * NDIR to measure CO2 with Internal Temperature Compensation 843 843 * Laser Beam Scattering to PM2.5 and PM10 844 844 823 + 824 + 825 + 826 + 845 845 === 6.3.2 Specification === 846 846 847 847 * CO2 Range: 0~5000ppm, accuracy: ±3%F•S(25℃) ... ... @@ -859,6 +859,10 @@ 859 859 ** CO2: 0~95%RH 860 860 * Power Consumption: 50mA@ 12v. 861 861 844 + 845 + 846 + 847 + 862 862 === 6.3.3 Dimension === 863 863 864 864 [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]] ... ... @@ -904,6 +904,10 @@ 904 904 * Surface heating to dry 905 905 * grid electrode uses Electroless Nickel/Immersion Gold design for resist corrosion 906 906 893 + 894 + 895 + 896 + 907 907 === 6.4.2 Specification === 908 908 909 909 * Detect if there is rain or snow ... ... @@ -915,6 +915,10 @@ 915 915 ** No heating: 12mA @ 12v, 916 916 ** heating: 94ma @ 12v. 917 917 908 + 909 + 910 + 911 + 918 918 === 6.4.3 Dimension === 919 919 920 920 [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]] ... ... @@ -964,6 +964,10 @@ 964 964 965 965 * RS485 Temperature, Humidity, Illuminance, Pressure sensor 966 966 961 + 962 + 963 + 964 + 967 967 === 6.5.2 Specification === 968 968 969 969 * Input Power: DC 12 ~~ 24v ... ... @@ -988,6 +988,10 @@ 988 988 * Working Humidity: 10~90%RH 989 989 * Power Consumption: 4mA @ 12v 990 990 989 + 990 + 991 + 992 + 991 991 === 6.5.3 Dimension === 992 992 993 993 [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image034.jpg]] ... ... @@ -1033,6 +1033,10 @@ 1033 1033 * Measure Total Radiation between 0.3~3μm(300~3000nm) 1034 1034 * Measure Reflected Radiation if sense area towards ground. 1035 1035 1038 + 1039 + 1040 + 1041 + 1036 1036 === 6.6.2 Specification === 1037 1037 1038 1038 * Input Power: DC 5 ~~ 24v ... ... @@ -1048,6 +1048,10 @@ 1048 1048 * Working Humidity: 10~90%RH 1049 1049 * Power Consumption: 4mA @ 12v 1050 1050 1057 + 1058 + 1059 + 1060 + 1051 1051 === 6.6.3 Dimension === 1052 1052 1053 1053 [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]] ... ... @@ -1105,6 +1105,10 @@ 1105 1105 * Working Humidity: 10~90%RH 1106 1106 * Power Consumption: 3mA @ 12v 1107 1107 1118 + 1119 + 1120 + 1121 + 1108 1108 === 6.7.3 Dimension === 1109 1109 1110 1110 [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]] ... ... @@ -1174,19 +1174,23 @@ 1174 1174 1175 1175 == 9.1 Main Process Unit == 1176 1176 1177 -Part Number: **WSC1-L-XX** 1191 +Part Number: **(% style="color:blue" %)WSC1-L-XX** 1178 1178 1179 -**XX**: The default frequency band 1193 +**(% style="color:blue" %)XX**(%%): The default frequency band 1180 1180 1181 -* **AS923**: LoRaWAN AS923 band 1182 -* **AU915**: LoRaWAN AU915 band 1183 -* **EU433**: LoRaWAN EU433 band 1184 -* **EU868**: LoRaWAN EU868 band 1185 -* **KR920**: LoRaWAN KR920 band 1186 -* **US915**: LoRaWAN US915 band 1187 -* **IN865**: LoRaWAN IN865 band 1188 -* **CN470**: LoRaWAN CN470 band 1195 +* **(% style="color:red" %)AS923**(%%): LoRaWAN AS923 band 1196 +* **(% style="color:red" %)AU915**(%%): LoRaWAN AU915 band 1197 +* **(% style="color:red" %)EU433**(%%): LoRaWAN EU433 band 1198 +* **(% style="color:red" %)EU868**(%%): LoRaWAN EU868 band 1199 +* **(% style="color:red" %)KR920**(%%): LoRaWAN KR920 band 1200 +* **(% style="color:red" %)US915**(%%): LoRaWAN US915 band 1201 +* **(% style="color:red" %)IN865**(%%): LoRaWAN IN865 band 1202 +* **(% style="color:red" %)CN470**(%%): LoRaWAN CN470 band 1189 1189 1204 + 1205 + 1206 + 1207 + 1190 1190 == 9.2 Sensors == 1191 1191 1192 1192 |**Sensor Model**|**Part Number** ... ... @@ -1199,6 +1199,8 @@ 1199 1199 |**Total Solar Radiation Sensor**|WSS-06 1200 1200 |**PAR (Photosynthetically Available Radiation)**|WSS-07 1201 1201 1220 + 1221 + 1202 1202 = 10. Support = 1203 1203 1204 1204 * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
- 1656054149793-239.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Xiaoling - Size
-
... ... @@ -1,0 +1,1 @@ 1 +492.6 KB - Content
- 1656054389031-379.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Xiaoling - Size
-
... ... @@ -1,0 +1,1 @@ 1 +1.3 MB - Content