Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -78,7 +78,6 @@
78	78	* Cabinet.
79	79
80	80
81		-
82	82	== 2.2 How it works? ==
83	83
84	84	(((
...	...	@@ -97,7 +97,6 @@
97	97	1. User can send a downlink command to WSC1-L to do a re-scan on the available sensors.
98	98
99	99
100		-
101	101	== 2.3 Example to use for LoRaWAN network ==
102	102
103	103	This section shows an example for how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.
...	...	@@ -155,6 +155,9 @@
155	155	* Other control command: Use FPORT other than 2.
156	156
157	157
	156	+
	157	+
	158	+
158	158	=== 2.4.1 Uplink FPORT~=5, Device Status ===
159	159
160	160	Uplink the device configures with FPORT=5. Once WSC1-L Joined the network, it will uplink this message to the server. After first uplink, WSC1-L will uplink Device Status every 12 hours
...	...	@@ -400,7 +400,6 @@
400	400
401	401
402	402
403		-
404	404	== 3.2 Set Emergency Mode ==
405	405
406	406	Feature: In emergency mode, WSC1-L will uplink data every 1 minute.
...	...	@@ -417,7 +417,6 @@
417	417
418	418
419	419
420		-
421	421	== 3.3 Add or Delete RS485 Sensor ==
422	422
423	423	Feature: User can add or delete 3^^rd^^ party sensor as long they are RS485/Modbus interface,baud rate support 9600.Maximum can add 4 sensors.
...	...	@@ -435,7 +435,6 @@
435	435	* timeout:  RS485 receive timeout (uint:ms). Device will close receive window after timeout
436	436
437	437
438		-
439	439	**Example:**
440	440
441	441	User need to change external sensor use the type code as address code.
...	...	@@ -460,7 +460,6 @@
460	460	* has_CRC: 1
461	461	* timeout: 1500 (Fill in the test according to the actual situation)
462	462
463		-
464	464	**So the input command is:**
465	465
466	466	AT+DYSENSOR=A1,8,A103000000019CAA,8,24,1,1500
...	...	@@ -491,7 +491,6 @@
491	491
492	492
493	493
494		-
495	495	== 3.4 RS485 Test Command ==
496	496
497	497	(% style="color:#037691" %)**AT Command:**
...	...	@@ -515,7 +515,6 @@
515	515
516	516
517	517
518		-
519	519	== 3.5 RS485 response timeout ==
520	520
521	521	Feature: Set or get extended time to receive 485 sensor data.
...	...	@@ -530,7 +530,6 @@
530	530	Range : 0~~10000
531	531	)))|(% style="width:85px" %)OK
532	532
533		-
534	534	(% style="color:#037691" %)**Downlink Command:**
535	535
536	536	Format: Command Code (0xE0) followed by 3 bytes time value.
...	...	@@ -542,7 +542,6 @@
542	542
543	543
544	544
545		-
546	546	== 3.6 Set Sensor Type ==
547	547
548	548	Feature: Set sensor in used. If there are 6 sensors, user can set to only send 5 sensors values.
...	...	@@ -624,7 +624,6 @@
624	624
625	625
626	626
627		-
628	628	== 5.2 Power Consumption ==
629	629
630	630	WSC1-L (without external sensor): Idle: 4mA, Transmit: max 40mA