Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -80,6 +80,7 @@
80	80
81	81
82	82
	83	+
83	83	== 2.2 How it works? ==
84	84
85	85	(((
...	...	@@ -100,6 +100,7 @@
100	100
101	101
102	102
	104	+
103	103	== 2.3 Example to use for LoRaWAN network ==
104	104
105	105	This section shows an example for how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.
...	...	@@ -158,6 +158,7 @@
158	158
159	159
160	160
	163	+
161	161	=== 2.4.1 Uplink FPORT~=5, Device Status ===
162	162
163	163	Uplink the device configures with FPORT=5. Once WSC1-L Joined the network, it will uplink this message to the server. After first uplink, WSC1-L will uplink Device Status every 12 hours
...	...	@@ -382,7 +382,6 @@
382	382	These commands only valid for WSC1-L, as below:
383	383
384	384
385		-
386	386	== 3.1 Set Transmit Interval Time ==
387	387
388	388	Feature: Change LoRaWAN End Node Transmit Interval.
...	...	@@ -403,8 +403,6 @@
403	403
404	404
405	405
406		-
407		-
408	408	== 3.2 Set Emergency Mode ==
409	409
410	410	Feature: In emergency mode, WSC1-L will uplink data every 1 minute.
...	...	@@ -421,8 +421,6 @@
421	421
422	422
423	423
424		-
425		-
426	426	== 3.3 Add or Delete RS485 Sensor ==
427	427
428	428	Feature: User can add or delete 3^^rd^^ party sensor as long they are RS485/Modbus interface,baud rate support 9600.Maximum can add 4 sensors.
...	...	@@ -439,6 +439,7 @@
439	439	* has_CRC:  RS485 Response crc check  (0: no verification required 1: verification required). If CRC=1 and CRC error, valid data will be set to 0.
440	440	* timeout:  RS485 receive timeout (uint:ms). Device will close receive window after timeout
441	441
	440	+
442	442	**Example:**
443	443
444	444	User need to change external sensor use the type code as address code.
...	...	@@ -463,6 +463,7 @@
463	463	* has_CRC: 1
464	464	* timeout: 1500 (Fill in the test according to the actual situation)
465	465
	465	+
466	466	**So the input command is:**
467	467
468	468	AT+DYSENSOR=A1,8,A103000000019CAA,8,24,1,1500
...	...	@@ -493,8 +493,6 @@
493	493
494	494
495	495
496		-
497		-
498	498	== 3.4 RS485 Test Command ==
499	499
500	500	(% style="color:#037691" %)**AT Command:**
...	...	@@ -518,8 +518,6 @@
518	518
519	519
520	520
521		-
522		-
523	523	== 3.5 RS485 response timeout ==
524	524
525	525	Feature: Set or get extended time to receive 485 sensor data.
...	...	@@ -534,6 +534,7 @@
534	534	Range : 0~~10000
535	535	)))|(% style="width:85px" %)OK
536	536
	533	+
537	537	(% style="color:#037691" %)**Downlink Command:**
538	538
539	539	Format: Command Code (0xE0) followed by 3 bytes time value.
...	...	@@ -545,13 +545,11 @@
545	545
546	546
547	547
548		-
549		-
550	550	== 3.6 Set Sensor Type ==
551	551
552	552	Feature: Set sensor in used. If there are 6 sensors, user can set to only send 5 sensors values.
553	553
554		-See [[definition>>||anchor="HWeatherSensorTypes:"]] for the sensor type.
	549	+See [[definition>>||anchor="H"]] for the sensor type.
555	555
556	556	[[image:image-20220624144904-12.png]]
557	557
...	...	@@ -563,6 +563,7 @@
563	563	|=(% style="width: 157px;" %)**Command Example**|=(% style="width: 130px;" %)**Function**|=(% style="width: 87px;" %)**Response**
564	564	|(% style="width:157px" %)AT+STYPE=80221|(% style="width:130px" %)Set sensor types|(% style="width:87px" %)OK
565	565
	561	+
566	566	Eg: The setting command **AT+STYPE=802212** means:
567	567
568	568	(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:495px" %)
...	...	@@ -599,15 +599,13 @@
599	599	The main process unit WSC1-L is set to LoRaWAN Class C by default. If user want to reduce the power consumption of this unit, user can set it to run in Class A. In Class A mode, WSC1-L will not be to get real-time downlink command from IoT Server.
600	600
601	601
	598	+
602	602	== 4.3 Battery ==
603	603
604		-(((
605		-All sensors are only power by external power source. If external power source is off. All sensor won't work.
606		-)))
	601	+All sensors are only power by external power source. If external power source is off. All sensor won’t work.
607	607
608		-(((
	603	+
609	609	Main Process Unit WSC1-L is powered by both external power source and internal 1000mAh rechargeable battery. If external power source is off, WSC1-L still runs and can send periodically uplinks, but the sensors value will become invalid.  External power source can recharge the 1000mAh rechargeable battery.
610		-)))
611	611
612	612
613	613
...	...	@@ -627,10 +627,6 @@
627	627	* IP Rating: IP65
628	628	* Support default sensors or 3rd party RS485 sensors
629	629
630		-
631		-
632		-
633		-
634	634	== 5.2 Power Consumption ==
635	635
636	636	WSC1-L (without external sensor): Idle: 4mA, Transmit: max 40mA