Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -77,6 +77,7 @@
77	77	* Mounting Kit includes pole and mast assembly. Each weather sensor has it’s own mounting assembly, user can check the sensor section in this manual.
78	78	* Cabinet.
79	79
	80	+
80	80	== 2.2 How it works? ==
81	81
82	82	(((
...	...	@@ -94,6 +94,7 @@
94	94	1. WSC1-L will auto scan available weather sensors when power on or reboot.
95	95	1. User can send a downlink command to WSC1-L to do a re-scan on the available sensors.
96	96
	98	+
97	97	== 2.3 Example to use for LoRaWAN network ==
98	98
99	99	This section shows an example for how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.
...	...	@@ -150,6 +150,10 @@
150	150	* Valid Sensor Value: Use FPORT=2
151	151	* Other control command: Use FPORT other than 2.
152	152
	155	+
	156	+
	157	+
	158	+
153	153	=== 2.4.1 Uplink FPORT~=5, Device Status ===
154	154
155	155	Uplink the device configures with FPORT=5. Once WSC1-L Joined the network, it will uplink this message to the server. After first uplink, WSC1-L will uplink Device Status every 12 hours
...	...	@@ -374,6 +374,7 @@
374	374	These commands only valid for WSC1-L, as below:
375	375
376	376
	383	+
377	377	== 3.1 Set Transmit Interval Time ==
378	378
379	379	Feature: Change LoRaWAN End Node Transmit Interval.
...	...	@@ -451,7 +451,6 @@
451	451	* has_CRC: 1
452	452	* timeout: 1500 (Fill in the test according to the actual situation)
453	453
454		-
455	455	**So the input command is:**
456	456
457	457	AT+DYSENSOR=A1,8,A103000000019CAA,8,24,1,1500
...	...	@@ -519,7 +519,6 @@
519	519	Range : 0~~10000
520	520	)))|(% style="width:85px" %)OK
521	521
522		-
523	523	(% style="color:#037691" %)**Downlink Command:**
524	524
525	525	Format: Command Code (0xE0) followed by 3 bytes time value.
...	...	@@ -535,45 +535,26 @@
535	535
536	536	Feature: Set sensor in used. If there are 6 sensors, user can set to only send 5 sensors values.
537	537
538		-See [[definition>>||anchor="H"]] for the sensor type.
	543	+See [[definition>>||anchor="HWeatherSensorTypes:"]] for the sensor type.
539	539
	545	+[[image:image-20220624144904-12.png]]
540	540
541		-|(% rowspan="2" %)Byte3|Bit23|Bit22|Bit21|Bit20|Bit19|Bit18|Bit17|Bit16
542		-| |A4|A3|A2|A1| | |
543		-|(% rowspan="2" %)Byte2|Bit15|Bit14|Bit13|Bit12|Bit11|Bit10|Bit9|Bit8
544		-| | |Solar Radiation|PAR|PM10|PM2.5|(((
545		-Rain
546	546
547		-Gauge
548		-)))|(((
549		-Air
550		-
551		-Pressure
552		-)))
553		-|(% rowspan="2" %)Byte1|Bit7|Bit6|Bit5|Bit4|Bit3|Bit2|Bit1|Bit0
554		-|Humidity|Temperature|CO2|(((
555		-Rain/Snow
556		-
557		-Detect
558		-)))|illuminance|(((
559		-Wind
560		-
561		-Direction
562		-)))|Wind Speed|BAT
563		-
564	564	(% style="color:#037691" %)**AT Command:**
565	565
566		-|**Command Example**|**Function**|**Response**
567		-|AT+STYPE=80221|Set sensor types|OK
	550	+(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:377px" %)
	551	+|=(% style="width: 157px;" %)**Command Example**|=(% style="width: 130px;" %)**Function**|=(% style="width: 87px;" %)**Response**
	552	+|(% style="width:157px" %)AT+STYPE=80221|(% style="width:130px" %)Set sensor types|(% style="width:87px" %)OK
568	568
569	569	Eg: The setting command **AT+STYPE=802212** means:
570	570
571		-|(% rowspan="2" %)Byte3|Bit23|Bit22|Bit21|Bit20|Bit19|Bit18|Bit17|Bit16
572		-|0|0|0|0|1|0|0|0
573		-|(% rowspan="2" %)Byte2|Bit15|Bit14|Bit13|Bit12|Bit11|Bit10|Bit9|Bit8
574		-|0|0|0|0|0|0|1|0
575		-|(% rowspan="2" %)Byte1|Bit7|Bit6|Bit5|Bit4|Bit3|Bit2|Bit1|Bit0
576		-|0|0|1|0|0|0|0|1
	556	+(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:495px" %)
	557	+|(% rowspan="2" style="width:57px" %)Byte3|(% style="width:57px" %)Bit23|(% style="width:59px" %)Bit22|(% style="width:56px" %)Bit21|(% style="width:51px" %)Bit20|(% style="width:54px" %)Bit19|(% style="width:54px" %)Bit18|(% style="width:52px" %)Bit17|(% style="width:52px" %)Bit16
	558	+|(% style="width:57px" %)0|(% style="width:59px" %)0|(% style="width:56px" %)0|(% style="width:51px" %)0|(% style="width:54px" %)1|(% style="width:54px" %)0|(% style="width:52px" %)0|(% style="width:52px" %)0
	559	+|(% rowspan="2" style="width:57px" %)Byte2|(% style="width:57px" %)Bit15|(% style="width:59px" %)Bit14|(% style="width:56px" %)Bit13|(% style="width:51px" %)Bit12|(% style="width:54px" %)Bit11|(% style="width:54px" %)Bit10|(% style="width:52px" %)Bit9|(% style="width:52px" %)Bit8
	560	+|(% style="width:57px" %)0|(% style="width:59px" %)0|(% style="width:56px" %)0|(% style="width:51px" %)0|(% style="width:54px" %)0|(% style="width:54px" %)0|(% style="width:52px" %)1|(% style="width:52px" %)0
	561	+|(% rowspan="2" style="width:57px" %)Byte1|(% style="width:57px" %)Bit7|(% style="width:59px" %)Bit6|(% style="width:56px" %)Bit5|(% style="width:51px" %)Bit4|(% style="width:54px" %)Bit3|(% style="width:54px" %)Bit2|(% style="width:52px" %)Bit1|(% style="width:52px" %)Bit0
	562	+|(% style="width:57px" %)0|(% style="width:59px" %)0|(% style="width:56px" %)1|(% style="width:51px" %)0|(% style="width:54px" %)0|(% style="width:54px" %)0|(% style="width:52px" %)0|(% style="width:52px" %)1
577	577
578	578	So wsc1-L will upload the following data: Custom Sensor A1, Rain Gauge,CO2,BAT.
579	579
...	...	@@ -584,12 +584,11 @@
584	584
585	585	(% style="color:red" %)**Note:**
586	586
587		-~1. The sensor type will not be saved to flash, and the value will be updated every time the sensor is restarted or rescanned
	573	+~1. The sensor type will not be saved to flash, and the value will be updated every time the sensor is restarted or rescanned.
588	588
589	589
590	590
591	591
592		-
593	593	= 4. Power consumption and battery =
594	594
595	595	== 4.1 Total Power Consumption ==
...	...	@@ -602,13 +602,15 @@
602	602	The main process unit WSC1-L is set to LoRaWAN Class C by default. If user want to reduce the power consumption of this unit, user can set it to run in Class A. In Class A mode, WSC1-L will not be to get real-time downlink command from IoT Server.
603	603
604	604
605		-
606	606	== 4.3 Battery ==
607	607
608		-All sensors are only power by external power source. If external power source is off. All sensor won’t work.
	592	+(((
	593	+All sensors are only power by external power source. If external power source is off. All sensor won't work.
	594	+)))
609	609
610		-
	596	+(((
611	611	Main Process Unit WSC1-L is powered by both external power source and internal 1000mAh rechargeable battery. If external power source is off, WSC1-L still runs and can send periodically uplinks, but the sensors value will become invalid.  External power source can recharge the 1000mAh rechargeable battery.
	598	+)))
612	612
613	613
614	614
...	...	@@ -628,6 +628,8 @@
628	628	* IP Rating: IP65
629	629	* Support default sensors or 3rd party RS485 sensors
630	630
	618	+
	619	+
631	631	== 5.2 Power Consumption ==
632	632
633	633	WSC1-L (without external sensor): Idle: 4mA, Transmit: max 40mA