Changes for page WSC1-L-Dragino LoRaWAN Weather Station User Manual
Last modified by Xiaoling on 2025/05/07 14:00
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 3 added, 0 removed)
Details
- Page properties
-
- Content
-
... ... @@ -401,13 +401,11 @@ 401 401 402 402 Feature: In emergency mode, WSC1-L will uplink data every 1 minute. 403 403 404 - 405 405 (% style="color:#037691" %)**AT Command:** 406 406 407 -|**Command Example**|**Function**|**Response** 408 -|AT+ALARMMOD=1|Enter emergency mode. Uplink every 1 minute|OK 409 -|AT+ALARMMOD=0|Exit emergency mode. Uplink base on TDC time|OK 406 +[[image:image-20220624142956-9.png]] 410 410 408 + 411 411 (% style="color:#037691" %)**Downlink Command:** 412 412 413 413 * 0xE101 Same as: AT+ALARMMOD=1 ... ... @@ -422,32 +422,31 @@ 422 422 423 423 (% style="color:#037691" %)**AT Command: ** 424 424 425 -AT+DYSENSOR=Type_Code, Query_Length, Query_Command , Read_Length , Valid_Data ,has_CRC,timeout 423 +**AT+DYSENSOR=Type_Code, Query_Length, Query_Command , Read_Length , Valid_Data ,has_CRC,timeout** 426 426 427 -* Type_Code range: A1 ~~ A4 428 -* Query_Length: RS485 Query frame length, Value cannot be greater than 10 429 -* Query_Command: RS485 Query frame data to be sent to sensor, cannot be larger than 10 bytes 430 -* Read_Length: RS485 response frame length supposed to receive. Max can receive 431 -* Valid_Data: valid data from RS485 Response, Valid Data will be added to Payload and upload via LoRaWAN. 432 -* has_CRC: RS485 Response crc check (0: no verification required 1: verification required). If CRC=1 and CRC error, valid data will be set to 0. 433 -* timeout: RS485 receive timeout (uint:ms). Device will close receive window after timeout 425 +* Type_Code range: A1 ~~ A4 426 +* Query_Length: RS485 Query frame length, Value cannot be greater than 10 427 +* Query_Command: RS485 Query frame data to be sent to sensor, cannot be larger than 10 bytes 428 +* Read_Length: RS485 response frame length supposed to receive. Max can receive 429 +* Valid_Data: valid data from RS485 Response, Valid Data will be added to Payload and upload via LoRaWAN. 430 +* has_CRC: RS485 Response crc check (0: no verification required 1: verification required). If CRC=1 and CRC error, valid data will be set to 0. 431 +* timeout: RS485 receive timeout (uint:ms). Device will close receive window after timeout 434 434 435 -Example: 436 436 434 +**Example:** 435 + 437 437 User need to change external sensor use the type code as address code. 438 438 439 439 With a 485 sensor, after correctly changing the address code to A1, the RS485 query frame is shown in the following table: 440 440 441 -|Address Code|Function Code|(% colspan="2" %)Start Register|(% colspan="2" %)Data Length|CRC Check Low|CRC Check High 442 -|0xA1|0x03|0x00|0x00|0x00|0x01|0x9C|0xAA 443 -| | | | | | | | 440 +[[image:image-20220624143553-10.png]] 444 444 442 + 445 445 The response frame of the sensor is as follows: 446 446 447 -|Address Code|Function Code|(% colspan="2" %)Data Length|(% colspan="2" %)Data|CRC Check Low|CRC Check High 448 -|0xA1|0x03|0x00|0x02|0x00|0x0A|0x7C|0xAD 449 -| | | | | | | | 445 +[[image:image-20220624143618-11.png]] 450 450 447 + 451 451 Then the following parameters should be: 452 452 453 453 * Address_Code range: A1 ... ... @@ -458,6 +458,7 @@ 458 458 * has_CRC: 1 459 459 * timeout: 1500 (Fill in the test according to the actual situation) 460 460 458 + 461 461 So the input command is: 462 462 463 463 AT+DYSENSOR=A1,8,A103000000019CAA,8,24,1,1500
- image-20220624142956-9.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Xiaoling - Size
-
... ... @@ -1,0 +1,1 @@ 1 +9.2 KB - Content
- image-20220624143553-10.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Xiaoling - Size
-
... ... @@ -1,0 +1,1 @@ 1 +6.7 KB - Content
- image-20220624143618-11.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Xiaoling - Size
-
... ... @@ -1,0 +1,1 @@ 1 +6.3 KB - Content