Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 0 added, 1 removed)
  • image-20220624142619-8.png

Details

Page properties

Content

...	...	@@ -67,6 +67,7 @@
67	67	* WSC1-L has an extra 1000mAh back up battery. So it can work even solar panel and storage battery Fails.
68	68	* Weather sensors won’t work if solar panel and storage battery fails.
69	69
	70	+
70	70	(% style="color:red" %)** Notice 2:**
71	71
72	72	Due to shipment and importation limitation, user is better to purchase below parts locally:
...	...	@@ -152,6 +152,7 @@
152	152	* Valid Sensor Value: Use FPORT=2
153	153	* Other control command: Use FPORT other than 2.
154	154
	156	+
155	155	=== 2.4.1 Uplink FPORT~=5, Device Status ===
156	156
157	157	Uplink the device configures with FPORT=5. Once WSC1-L Joined the network, it will uplink this message to the server. After first uplink, WSC1-L will uplink Device Status every 12 hours
...	...	@@ -357,6 +357,7 @@
357	357	* AT Command Connection: See [[FAQ>>||anchor="H7.FAQ"]].
358	358	* LoRaWAN Downlink instruction for different platforms:  [[Use Note for Server>>doc:Main.WebHome]](IoT LoRaWAN Server)
359	359
	362	+
360	360	There are two kinds of commands to configure WSC1-L, they are:
361	361
362	362	* (% style="color:#4472c4" %)**General Commands**.
...	...	@@ -382,9 +382,20 @@
382	382
383	383	(% style="color:#037691" %)**AT Command: AT+TDC**
384	384
385		-[[image:image-20220624142619-8.png]]
	388	+|**Command Example**|**Function**|**Response**
	389	+|AT+TDC?|Show current transmit Interval|(((
	390	+30000
386	386
	392	+OK
387	387
	394	+the interval is 30000ms = 30s
	395	+)))
	396	+|AT+TDC=60000|Set Transmit Interval|(((
	397	+OK
	398	+
	399	+Set transmit interval to 60000ms = 60 seconds
	400	+)))
	401	+
388	388	(% style="color:#037691" %)**Downlink Command: 0x01**
389	389
390	390	Format: Command Code (0x01) followed by 3 bytes time value.
...	...	@@ -394,9 +394,6 @@
394	394	* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
395	395	* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
396	396
397		-
398		-
399		-
400	400	== 3.2 Set Emergency Mode ==
401	401
402	402	Feature: In emergency mode, WSC1-L will uplink data every 1 minute.
...	...	@@ -413,9 +413,6 @@
413	413	* 0xE101     Same as: AT+ALARMMOD=1
414	414	* 0xE100     Same as: AT+ALARMMOD=0
415	415
416		-
417		-
418		-
419	419	== 3.3 Add or Delete RS485 Sensor ==
420	420
421	421	Feature: User can add or delete 3^^rd^^ party sensor as long they are RS485/Modbus interface,baud rate support 9600.Maximum can add 4 sensors.
...	...	@@ -485,9 +485,6 @@
485	485
486	486	* 0xE5FF
487	487
488		-
489		-
490		-
491	491	== 3.4 RS485 Test Command ==
492	492
493	493	(% style="color:#037691" %)**AT Command:**
...	...	@@ -508,9 +508,6 @@
508	508
509	509	* 0xE20103000001840A     Same as: AT+RSWRITE=0103000001840A
510	510
511		-
512		-
513		-
514	514	== 3.5 RS485 response timeout ==
515	515
516	516	Feature: Set or get extended time to receive 485 sensor data.
...	...	@@ -533,9 +533,6 @@
533	533	* Example 1: Downlink Payload: E0000005 ~/~/ Set Transmit Interval (DTR) = 5 seconds
534	534	* Example 2: Downlink Payload: E000000A ~/~/ Set Transmit Interval (DTR) = 10 seconds
535	535
536		-
537		-
538		-
539	539	== 3.6 Set Sensor Type ==
540	540
541	541	Feature: Set sensor in used. If there are 6 sensors, user can set to only send 5 sensors values.

image-20220624142619-8.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-12.5 KB

Content