Skip to Content
Last modified by Mengting Qiu on 2025/07/09 16:00
From version 27.7
edited by Xiaoling
on 2022/06/24 14:21
Change comment: There is no comment for this version
To version 46.4
edited by Xiaoling
on 2022/06/24 15:43
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -68,6 +68,7 @@
68 68  * Weather sensors won’t work if solar panel and storage battery fails.
69 69  
70 70  
71 +
71 71  (% style="color:red" %)** Notice 2:**
72 72  
73 73  Due to shipment and importation limitation, user is better to purchase below parts locally:
... ... @@ -79,6 +79,10 @@
79 79  * Cabinet.
80 80  
81 81  
83 +
84 +
85 +
86 +
82 82  == 2.2 How it works? ==
83 83  
84 84  (((
... ... @@ -97,6 +97,10 @@
97 97  1. User can send a downlink command to WSC1-L to do a re-scan on the available sensors.
98 98  
99 99  
105 +
106 +
107 +
108 +
100 100  == 2.3 Example to use for LoRaWAN network ==
101 101  
102 102  This section shows an example for how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.
... ... @@ -359,7 +359,6 @@
359 359  * AT Command Connection: See [[FAQ>>||anchor="H7.FAQ"]].
360 360  * LoRaWAN Downlink instruction for different platforms:  [[Use Note for Server>>doc:Main.WebHome]](IoT LoRaWAN Server)
361 361  
362 -
363 363  There are two kinds of commands to configure WSC1-L, they are:
364 364  
365 365  * (% style="color:#4472c4" %)**General Commands**.
... ... @@ -379,6 +379,10 @@
379 379  These commands only valid for WSC1-L, as below:
380 380  
381 381  
390 +
391 +
392 +
393 +
382 382  == 3.1 Set Transmit Interval Time ==
383 383  
384 384  Feature: Change LoRaWAN End Node Transmit Interval.
... ... @@ -385,20 +385,9 @@
385 385  
386 386  (% style="color:#037691" %)**AT Command: AT+TDC**
387 387  
388 -|**Command Example**|**Function**|**Response**
389 -|AT+TDC?|Show current transmit Interval|(((
390 -30000
400 +[[image:image-20220624142619-8.png]]
391 391  
392 -OK
393 393  
394 -the interval is 30000ms = 30s
395 -)))
396 -|AT+TDC=60000|Set Transmit Interval|(((
397 -OK
398 -
399 -Set transmit interval to 60000ms = 60 seconds
400 -)))
401 -
402 402  (% style="color:#037691" %)**Downlink Command: 0x01**
403 403  
404 404  Format: Command Code (0x01) followed by 3 bytes time value.
... ... @@ -408,22 +408,30 @@
408 408  * Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
409 409  * Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
410 410  
412 +
413 +
414 +
415 +
416 +
411 411  == 3.2 Set Emergency Mode ==
412 412  
413 413  Feature: In emergency mode, WSC1-L will uplink data every 1 minute.
414 414  
415 -
416 416  (% style="color:#037691" %)**AT Command:**
417 417  
418 -|**Command Example**|**Function**|**Response**
419 -|AT+ALARMMOD=1|Enter emergency mode. Uplink every 1 minute|OK
420 -|AT+ALARMMOD=0|Exit emergency mode. Uplink base on TDC time|OK
423 +[[image:image-20220624142956-9.png]]
421 421  
425 +
422 422  (% style="color:#037691" %)**Downlink Command:**
423 423  
424 424  * 0xE101     Same as: AT+ALARMMOD=1
425 425  * 0xE100     Same as: AT+ALARMMOD=0
426 426  
431 +
432 +
433 +
434 +
435 +
427 427  == 3.3 Add or Delete RS485 Sensor ==
428 428  
429 429  Feature: User can add or delete 3^^rd^^ party sensor as long they are RS485/Modbus interface,baud rate support 9600.Maximum can add 4 sensors.
... ... @@ -430,34 +430,33 @@
430 430  
431 431  (% style="color:#037691" %)**AT Command: **
432 432  
433 -AT+DYSENSOR=Type_Code, Query_Length, Query_Command , Read_Length , Valid_Data ,has_CRC,timeout
442 +(% style="color:blue" %)**AT+DYSENSOR=Type_Code, Query_Length, Query_Command , Read_Length , Valid_Data ,has_CRC,timeout**
434 434  
435 -* Type_Code range: A1 ~~ A4
436 -* Query_Length: RS485 Query frame length, Value cannot be greater than 10
437 -* Query_Command: RS485 Query frame data to be sent to sensor, cannot be larger than 10 bytes
438 -* Read_Length: RS485 response frame length supposed to receive. Max can receive
439 -* Valid_Data: valid data from RS485 Response, Valid Data will be added to Payload and upload via LoRaWAN.
440 -* has_CRC: RS485 Response crc check  (0: no verification required 1: verification required). If CRC=1 and CRC error, valid data will be set to 0.
441 -* timeout: RS485 receive timeout (uint:ms). Device will close receive window after timeout
444 +* Type_Code range:  A1 ~~ A4
445 +* Query_Length:  RS485 Query frame length, Value cannot be greater than 10
446 +* Query_Command:  RS485 Query frame data to be sent to sensor, cannot be larger than 10 bytes
447 +* Read_Length:  RS485 response frame length supposed to receive. Max can receive
448 +* Valid_Data:  valid data from RS485 Response, Valid Data will be added to Payload and upload via LoRaWAN.
449 +* has_CRC:  RS485 Response crc check  (0: no verification required 1: verification required). If CRC=1 and CRC error, valid data will be set to 0.
450 +* timeout:  RS485 receive timeout (uint:ms). Device will close receive window after timeout
442 442  
443 -Example:
452 +**Example:**
444 444  
445 445  User need to change external sensor use the type code as address code.
446 446  
447 447  With a 485 sensor, after correctly changing the address code to A1, the RS485 query frame is shown in the following table:
448 448  
449 -|Address Code|Function Code|(% colspan="2" %)Start Register|(% colspan="2" %)Data Length|CRC Check Low|CRC Check High
450 -|0xA1|0x03|0x00|0x00|0x00|0x01|0x9C|0xAA
451 -| | | | | | | |
458 +[[image:image-20220624143553-10.png]]
452 452  
460 +
453 453  The response frame of the sensor is as follows:
454 454  
455 -|Address Code|Function Code|(% colspan="2" %)Data Length|(% colspan="2" %)Data|CRC Check Low|CRC Check High
456 -|0xA1|0x03|0x00|0x02|0x00|0x0A|0x7C|0xAD
457 -| | | | | | | |
463 +[[image:image-20220624143618-11.png]]
458 458  
459 -Then the following parameters should be:
460 460  
466 +
467 +**Then the following parameters should be:**
468 +
461 461  * Address_Code range: A1
462 462  * Query_Length: 8
463 463  * Query_Command: A103000000019CAA
... ... @@ -466,23 +466,27 @@
466 466  * has_CRC: 1
467 467  * timeout: 1500 (Fill in the test according to the actual situation)
468 468  
469 -So the input command is:
470 470  
478 +
479 +**So the input command is:**
480 +
471 471  AT+DYSENSOR=A1,8,A103000000019CAA,8,24,1,1500
472 472  
473 473  
474 474  In every sampling. WSC1-L will auto append the sensor segment as per this structure and uplink.
475 475  
476 -|Type Code|Length (Bytes)|Measured Value
477 -|A1|2|0x000A
486 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:351px" %)
487 +|=(% style="width: 94px;" %)Type Code|=(% style="width: 121px;" %)Length (Bytes)|=(% style="width: 132px;" %)Measured Value
488 +|(% style="width:94px" %)A1|(% style="width:121px" %)2|(% style="width:132px" %)0x000A
478 478  
479 -Related commands:
480 480  
481 -AT+DYSENSOR=A1,0 –> Delete 3^^rd^^ party sensor A1.
491 +**Related commands:**
482 482  
483 -AT+DYSENSOR ~-~-> List All 3^^rd^^ Party Sensor. Like below:
493 +AT+DYSENSOR=A1,0  ~-~->  Delete 3^^rd^^ party sensor A1.
484 484  
495 +AT+DYSENSOR  ~-~->  List All 3^^rd^^ Party Sensor. Like below:
485 485  
497 +
486 486  (% style="color:#037691" %)**Downlink Command:  **
487 487  
488 488  **delete custom sensor A1:**
... ... @@ -493,16 +493,22 @@
493 493  
494 494  * 0xE5FF  
495 495  
508 +
509 +
510 +
511 +
512 +
496 496  == 3.4 RS485 Test Command ==
497 497  
498 498  (% style="color:#037691" %)**AT Command:**
499 499  
500 -|**Command Example**|**Function**|**Response**
501 -|AT+RSWRITE=xxxxxx|(((
517 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:474px" %)
518 +|=(% style="width: 159px;" %)**Command Example**|=(% style="width: 227px;" %)**Function**|=(% style="width: 85px;" %)**Response**
519 +|(% style="width:159px" %)AT+RSWRITE=xxxxxx|(% style="width:227px" %)(((
502 502  Send command to 485 sensor
503 503  
504 504  Range : no more than 10 bytes
505 -)))|OK
523 +)))|(% style="width:85px" %)OK
506 506  
507 507  Eg: Send command **01 03 00 00 00 01 84 0A** to 485 sensor
508 508  
... ... @@ -513,6 +513,11 @@
513 513  
514 514  * 0xE20103000001840A     Same as: AT+RSWRITE=0103000001840A
515 515  
534 +
535 +
536 +
537 +
538 +
516 516  == 3.5 RS485 response timeout ==
517 517  
518 518  Feature: Set or get extended time to receive 485 sensor data.
... ... @@ -519,12 +519,13 @@
519 519  
520 520  (% style="color:#037691" %)**AT Command:**
521 521  
522 -|**Command Example**|**Function**|**Response**
523 -|AT+DTR=1000|(((
545 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:433px" %)
546 +|=(% style="width: 157px;" %)**Command Example**|=(% style="width: 188px;" %)**Function**|=(% style="width: 85px;" %)**Response**
547 +|(% style="width:157px" %)AT+DTR=1000|(% style="width:188px" %)(((
524 524  Set response timeout to:
525 525  
526 526  Range : 0~~10000
527 -)))|OK
551 +)))|(% style="width:85px" %)OK
528 528  
529 529  (% style="color:#037691" %)**Downlink Command:**
530 530  
... ... @@ -535,49 +535,35 @@
535 535  * Example 1: Downlink Payload: E0000005 ~/~/ Set Transmit Interval (DTR) = 5 seconds
536 536  * Example 2: Downlink Payload: E000000A ~/~/ Set Transmit Interval (DTR) = 10 seconds
537 537  
538 -== 3.6 Set Sensor Type ==
539 539  
540 -Feature: Set sensor in used. If there are 6 sensors, user can set to only send 5 sensors values.
541 541  
542 -See [[definition>>||anchor="H"]] for the sensor type.
543 543  
544 544  
545 -|(% rowspan="2" %)Byte3|Bit23|Bit22|Bit21|Bit20|Bit19|Bit18|Bit17|Bit16
546 -| |A4|A3|A2|A1| | |
547 -|(% rowspan="2" %)Byte2|Bit15|Bit14|Bit13|Bit12|Bit11|Bit10|Bit9|Bit8
548 -| | |Solar Radiation|PAR|PM10|PM2.5|(((
549 -Rain
550 550  
551 -Gauge
552 -)))|(((
553 -Air
567 +== 3.6 Set Sensor Type ==
554 554  
555 -Pressure
556 -)))
557 -|(% rowspan="2" %)Byte1|Bit7|Bit6|Bit5|Bit4|Bit3|Bit2|Bit1|Bit0
558 -|Humidity|Temperature|CO2|(((
559 -Rain/Snow
569 +Feature: Set sensor in used. If there are 6 sensors, user can set to only send 5 sensors values.
560 560  
561 -Detect
562 -)))|illuminance|(((
563 -Wind
571 +See [[definition>>||anchor="HWeatherSensorTypes:"]] for the sensor type.
564 564  
565 -Direction
566 -)))|Wind Speed|BAT
573 +[[image:image-20220624144904-12.png]]
567 567  
575 +
568 568  (% style="color:#037691" %)**AT Command:**
569 569  
570 -|**Command Example**|**Function**|**Response**
571 -|AT+STYPE=80221|Set sensor types|OK
578 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:377px" %)
579 +|=(% style="width: 157px;" %)**Command Example**|=(% style="width: 130px;" %)**Function**|=(% style="width: 87px;" %)**Response**
580 +|(% style="width:157px" %)AT+STYPE=80221|(% style="width:130px" %)Set sensor types|(% style="width:87px" %)OK
572 572  
573 573  Eg: The setting command **AT+STYPE=802212** means:
574 574  
575 -|(% rowspan="2" %)Byte3|Bit23|Bit22|Bit21|Bit20|Bit19|Bit18|Bit17|Bit16
576 -|0|0|0|0|1|0|0|0
577 -|(% rowspan="2" %)Byte2|Bit15|Bit14|Bit13|Bit12|Bit11|Bit10|Bit9|Bit8
578 -|0|0|0|0|0|0|1|0
579 -|(% rowspan="2" %)Byte1|Bit7|Bit6|Bit5|Bit4|Bit3|Bit2|Bit1|Bit0
580 -|0|0|1|0|0|0|0|1
584 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:495px" %)
585 +|(% rowspan="2" style="width:57px" %)Byte3|(% style="width:57px" %)Bit23|(% style="width:59px" %)Bit22|(% style="width:56px" %)Bit21|(% style="width:51px" %)Bit20|(% style="width:54px" %)Bit19|(% style="width:54px" %)Bit18|(% style="width:52px" %)Bit17|(% style="width:52px" %)Bit16
586 +|(% style="width:57px" %)0|(% style="width:59px" %)0|(% style="width:56px" %)0|(% style="width:51px" %)0|(% style="width:54px" %)1|(% style="width:54px" %)0|(% style="width:52px" %)0|(% style="width:52px" %)0
587 +|(% rowspan="2" style="width:57px" %)Byte2|(% style="width:57px" %)Bit15|(% style="width:59px" %)Bit14|(% style="width:56px" %)Bit13|(% style="width:51px" %)Bit12|(% style="width:54px" %)Bit11|(% style="width:54px" %)Bit10|(% style="width:52px" %)Bit9|(% style="width:52px" %)Bit8
588 +|(% style="width:57px" %)0|(% style="width:59px" %)0|(% style="width:56px" %)0|(% style="width:51px" %)0|(% style="width:54px" %)0|(% style="width:54px" %)0|(% style="width:52px" %)1|(% style="width:52px" %)0
589 +|(% rowspan="2" style="width:57px" %)Byte1|(% style="width:57px" %)Bit7|(% style="width:59px" %)Bit6|(% style="width:56px" %)Bit5|(% style="width:51px" %)Bit4|(% style="width:54px" %)Bit3|(% style="width:54px" %)Bit2|(% style="width:52px" %)Bit1|(% style="width:52px" %)Bit0
590 +|(% style="width:57px" %)0|(% style="width:59px" %)0|(% style="width:56px" %)1|(% style="width:51px" %)0|(% style="width:54px" %)0|(% style="width:54px" %)0|(% style="width:52px" %)0|(% style="width:52px" %)1
581 581  
582 582  So wsc1-L will upload the following data: Custom Sensor A1, Rain Gauge,CO2,BAT.
583 583  
... ... @@ -588,12 +588,11 @@
588 588  
589 589  (% style="color:red" %)**Note:**
590 590  
591 -~1. The sensor type will not be saved to flash, and the value will be updated every time the sensor is restarted or rescanned
601 +~1. The sensor type will not be saved to flash, and the value will be updated every time the sensor is restarted or rescanned.
592 592  
593 593  
594 594  
595 595  
596 -
597 597  = 4. Power consumption and battery =
598 598  
599 599  == 4.1 Total Power Consumption ==
... ... @@ -606,16 +606,17 @@
606 606  The main process unit WSC1-L is set to LoRaWAN Class C by default. If user want to reduce the power consumption of this unit, user can set it to run in Class A. In Class A mode, WSC1-L will not be to get real-time downlink command from IoT Server.
607 607  
608 608  
609 -
610 610  == 4.3 Battery ==
611 611  
612 -All sensors are only power by external power source. If external power source is off. All sensor won’t work.
620 +(((
621 +All sensors are only power by external power source. If external power source is off. All sensor won't work.
622 +)))
613 613  
614 -
624 +(((
615 615  Main Process Unit WSC1-L is powered by both external power source and internal 1000mAh rechargeable battery. If external power source is off, WSC1-L still runs and can send periodically uplinks, but the sensors value will become invalid.  External power source can recharge the 1000mAh rechargeable battery.
626 +)))
616 616  
617 617  
618 -
619 619  = 5. Main Process Unit WSC1-L =
620 620  
621 621  == 5.1 Features ==
... ... @@ -637,7 +637,6 @@
637 637  WSC1-L (without external sensor): Idle: 4mA, Transmit: max 40mA
638 638  
639 639  
640 -
641 641  == 5.3 Storage & Operation Temperature ==
642 642  
643 643  -20°C to +60°C
... ... @@ -645,7 +645,7 @@
645 645  
646 646  == 5.4 Pin Mapping ==
647 647  
648 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.png]]
657 +[[image:1656054149793-239.png]]
649 649  
650 650  
651 651  == 5.5 Mechanical ==
... ... @@ -653,14 +653,12 @@
653 653  Refer LSn50v2 enclosure drawing in: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Mechanical_Drawing/>>url:https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Mechanical_Drawing/]]
654 654  
655 655  
656 -
657 -
658 658  == 5.6 Connect to RS485 Sensors ==
659 659  
660 660  WSC1-L includes a RS485 converter PCB. Which help it easy to connect multiply RS485 sensors. Below is the photo for reference.
661 661  
662 662  
663 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]]
670 +[[image:1656054389031-379.png]]
664 664  
665 665  
666 666  Hardware Design for the Converter Board please see:
... ... @@ -668,37 +668,32 @@
668 668  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/RS485_Converter_Board/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/RS485_Converter_Board/]]
669 669  
670 670  
671 -
672 -
673 -
674 674  = 6. Weather Sensors =
675 675  
676 676  == 6.1 Rain Gauge ~-~- WSS-01 ==
677 677  
682 +
683 +(((
678 678  WSS-01 RS485 Rain Gauge is used in meteorology and hydrology to gather and measure the amount of liquid precipitation (mainly rainfall) over an area.
685 +)))
679 679  
687 +(((
688 +WSS-01 uses a tipping bucket to detect rainfall. The tipping bucket use 3D streamline shape to make sure it works smoothly and is easy to clean.
689 +)))
680 680  
681 -WSS-01 uses a tipping bucket to detect rainfall. The tipping bucket use 3D streamline
691 +(((
692 +WSS-01 is designed to support the Dragino Weather station solution. Users only need to connect WSS-01 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload the rainfall to the IoT Server via wireless LoRaWAN protocol
693 +)))
682 682  
683 -shape to make sure it works smoothly and is easy to clean.
695 +(((
696 +The tipping bucket of WSS-01 is adjusted to the best angle. When installation, user only needs to screw up and adjust the bottom horizontally.
697 +)))
684 684  
685 -
686 -WSS-01 is designed to support the Dragino Weather station solution.
687 -
688 -Users only need to connect WSS-01 RS485 interface to WSC1-L. The weather station main
689 -
690 -processor WSC1-L can detect and upload the rainfall to the IoT Server via wireless LoRaWAN protocol
691 -
692 -
693 -The tipping bucket of WSS-01 is adjusted to the best angle. When installation, user only needs
694 -
695 -to screw up and adjust the bottom horizontally.
696 -
697 -
699 +(((
698 698  WSS-01 package includes screw which can be installed to ground. If user want to install WSS-01 on pole, they can purchase WS-K2 bracket kit.
701 +)))
699 699  
700 700  
701 -
702 702  === 6.1.1 Feature ===
703 703  
704 704  * RS485 Rain Gauge
... ... @@ -707,6 +707,8 @@
707 707  * ABS enclosure.
708 708  * Horizontal adjustable.
709 709  
712 +
713 +
710 710  === 6.1.2 Specification ===
711 711  
712 712  * Resolution: 0.2mm
... ... @@ -718,18 +718,18 @@
718 718  * Working Humidity: <100% (no dewing)
719 719  * Power Consumption: 4mA @ 12v.
720 720  
725 +
726 +
721 721  === 6.1.3 Dimension ===
722 722  
723 - [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.jpg||alt="c2d3aee592ccc873bea6dd891451df2"]]
729 + [[image:1656054957406-980.png]]
724 724  
725 725  
726 726  === 6.1.4 Pin Mapping ===
727 727  
728 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
734 +[[image:1656054972828-692.png]]
729 729  
730 730  
731 -
732 -
733 733  === 6.1.5 Installation Notice ===
734 734  
735 735  Do not power on while connect the cables. Double check the wiring before power on.
... ... @@ -746,39 +746,41 @@
746 746  
747 747  If user want to install on pole, they can purchase the (% style="color:#4472c4" %)** WS-K2 :  Bracket Kit for Pole installation**(%%), and install as below:
748 748  
749 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]]
753 +[[image:image-20220624152218-1.png||height="526" width="276"]]
750 750  
755 +WS-K2: Bracket Kit for Pole installation
751 751  
752 -WS-K2: Bracket Kit for Pole installation:
753 753  
754 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]
755 755  
756 756  WSSC-K2 dimension document, please see:
757 757  
758 -https:~/~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/ 
761 +[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/]]
759 759  
760 760  
761 -
762 762  == 6.2 Wind Speed/Direction ~-~- WSS-02 ==
763 763  
764 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]
766 +[[image:1656055444035-179.png]]
765 765  
768 +(((
766 766  WSS-02 is a RS485 wind speed and wind direction monitor designed for weather station solution.
770 +)))
767 767  
768 -
772 +(((
769 769  WSS-02 shell is made of polycarbonate composite material, which has good anti-corrosion and anti-corrosion characteristics, and ensure the long-term use of the sensor without rust. At the same time, it cooperates with the internal smooth bearing system to ensure the stability of information collection
774 +)))
770 770  
776 +(((
777 +Users only need to connect WSS-02 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload the wind speed and direction to the IoT Server via wireless LoRaWAN protocol.
778 +)))
771 771  
772 -Users only need to connect WSS-02 RS485 interface to WSC1-L. The weather station main
773 773  
774 -processor WSC1-L can detect and upload the wind speed and direction to the IoT Server via wireless LoRaWAN protocol.
775 -
776 -
777 777  === 6.2.1 Feature ===
778 778  
779 779  * RS485 wind speed / direction sensor
780 780  * PC enclosure, resist corrosion
781 781  
786 +
787 +
782 782  === 6.2.2 Specification ===
783 783  
784 784  * Wind speed range: 0 ~~ 30m/s, (always show 30m/s for higher speed)
... ... @@ -792,42 +792,32 @@
792 792  * Power Consumption: 13mA ~~ 12v.
793 793  * Cable Length: 2 meters
794 794  
801 +
802 +
795 795  === 6.2.3 Dimension ===
796 796  
797 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.jpg]][[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.jpg]]
805 +[[image:image-20220624152813-2.png]]
798 798  
799 799  
800 800  === 6.2.4 Pin Mapping ===
801 801  
802 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
810 +[[image:1656056281231-994.png]]
803 803  
804 804  
805 -=== 6.2.4 Angle Mapping ===
813 +=== 6.2.5  Angle Mapping ===
806 806  
807 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]
815 +[[image:1656056303845-585.png]]
808 808  
809 809  
810 -=== 6.2.5 Installation Notice ===
818 +=== 6.2.6  Installation Notice ===
811 811  
812 812  Do not power on while connect the cables. Double check the wiring before power on.
813 813  
814 -
815 815  The sensor must be installed with below direction, towards North.
816 816  
824 +[[image:image-20220624153901-3.png]]
817 817  
818 -|(((
819 -North
820 -)))
821 821  
822 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image027.png]]
823 -
824 -
825 -
826 -
827 -
828 -
829 -
830 -
831 831  == 6.3 CO2/PM2.5/PM10 ~-~- WSS-03 ==
832 832  
833 833  WSS-03 is a RS485 Air Quality sensor. It can monitor CO2, PM2.5 and PM10 at the same time.
... ... @@ -849,6 +849,8 @@
849 849  * NDIR to measure CO2 with Internal Temperature Compensation
850 850  * Laser Beam Scattering to PM2.5 and PM10
851 851  
848 +
849 +
852 852  === 6.3.2 Specification ===
853 853  
854 854  * CO2 Range: 0～5000ppm, accuracy: ±3%F•S（25℃）
... ... @@ -866,6 +866,8 @@
866 866  ** CO2: 0～95%RH
867 867  * Power Consumption: 50mA@ 12v.
868 868  
867 +
868 +
869 869  === 6.3.3 Dimension ===
870 870  
871 871  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]
... ... @@ -911,6 +911,8 @@
911 911  * Surface heating to dry
912 912  * grid electrode uses Electroless Nickel/Immersion Gold design for resist corrosion
913 913  
914 +
915 +
914 914  === 6.4.2 Specification ===
915 915  
916 916  * Detect if there is rain or snow
... ... @@ -922,6 +922,8 @@
922 922  ** No heating: 12mA @ 12v,
923 923  ** heating: 94ma @ 12v.
924 924  
927 +
928 +
925 925  === 6.4.3 Dimension ===
926 926  
927 927  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]
... ... @@ -971,6 +971,8 @@
971 971  
972 972  * RS485 Temperature, Humidity, Illuminance, Pressure sensor
973 973  
978 +
979 +
974 974  === 6.5.2 Specification ===
975 975  
976 976  * Input Power: DC 12 ~~ 24v
... ... @@ -995,6 +995,8 @@
995 995  * Working Humidity: 10～90%RH
996 996  * Power Consumption: 4mA @ 12v
997 997  
1004 +
1005 +
998 998  === 6.5.3 Dimension ===
999 999  
1000 1000  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image034.jpg]]
... ... @@ -1040,6 +1040,8 @@
1040 1040  * Measure Total Radiation between 0.3～3μm（300～3000nm）
1041 1041  * Measure Reflected Radiation if sense area towards ground.
1042 1042  
1051 +
1052 +
1043 1043  === 6.6.2 Specification ===
1044 1044  
1045 1045  * Input Power: DC 5 ~~ 24v
... ... @@ -1055,6 +1055,8 @@
1055 1055  * Working Humidity: 10～90%RH
1056 1056  * Power Consumption: 4mA @ 12v
1057 1057  
1068 +
1069 +
1058 1058  === 6.6.3 Dimension ===
1059 1059  
1060 1060  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]]
... ... @@ -1112,6 +1112,8 @@
1112 1112  * Working Humidity: 10～90%RH
1113 1113  * Power Consumption: 3mA @ 12v
1114 1114  
1127 +
1128 +
1115 1115  === 6.7.3 Dimension ===
1116 1116  
1117 1117  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]]
... ... @@ -1181,19 +1181,21 @@
1181 1181  
1182 1182  == 9.1 Main Process Unit ==
1183 1183  
1184 -Part Number: **WSC1-L-XX**
1198 +Part Number: (% style="color:blue" %)**WSC1-L-XX**
1185 1185  
1186 -**XX**: The default frequency band
1200 +(% style="color:blue" %)**XX**(%%): The default frequency band
1187 1187  
1188 -* **AS923**: LoRaWAN AS923 band
1189 -* **AU915**: LoRaWAN AU915 band
1190 -* **EU433**: LoRaWAN EU433 band
1191 -* **EU868**: LoRaWAN EU868 band
1192 -* **KR920**: LoRaWAN KR920 band
1193 -* **US915**: LoRaWAN US915 band
1194 -* **IN865**: LoRaWAN IN865 band
1195 -* **CN470**: LoRaWAN CN470 band
1202 +* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1203 +* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1204 +* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
1205 +* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1206 +* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1207 +* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1208 +* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
1209 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1196 1196  
1211 +
1212 +
1197 1197  == 9.2 Sensors ==
1198 1198  
1199 1199  |**Sensor Model**|**Part Number**
1656054149793-239.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +492.6 KB
Content
1656054389031-379.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.3 MB
Content
1656054957406-980.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
1656054972828-692.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +322.6 KB
Content
1656055150738-931.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +360.7 KB
Content
1656055172658-283.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +277.2 KB
Content
1656055444035-179.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +25.9 KB
Content
1656055602692-869.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +60.2 KB
Content
1656055604606-813.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +74.0 KB
Content
1656056281231-994.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +412.5 KB
Content
1656056303845-585.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +273.4 KB
Content
image-20220624142619-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.5 KB
Content
image-20220624142956-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +9.2 KB
Content
image-20220624143553-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +6.7 KB
Content
image-20220624143618-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +6.3 KB
Content
image-20220624144904-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +17.2 KB
Content
image-20220624152218-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +194.6 KB
Content
image-20220624152813-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +130.7 KB
Content
image-20220624153901-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content