Last modified by Xiaoling on 2025/04/25 09:08
<
From version < 105.1 >
edited by Bei Jinggeng
on 2023/06/15 09:49
To version < 119.1 >
edited by Xiaoling
on 2024/09/26 13:57
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Xiaoling
Content
... ... @@ -1,8 +1,13 @@
1 +
2 +
1 1  (% style="text-align:center" %)
2 2  [[image:1656035424980-692.png||height="533" width="386"]]
3 3  
4 4  
5 5  
8 +
9 +
10 +
6 6  **Table of Contents:**
7 7  
8 8  {{toc/}}
... ... @@ -21,19 +21,19 @@
21 21  
22 22  
23 23  (((
24 -Dragino LoRaWAN weather station series products are designed for measuring atmospheric conditions to provide information for weather forecasts and to study the (% style="color:#4472c4" %)**weather and climate**(%%). They consist of a (% style="color:#4472c4" %)**main process device (WSC1-L) and various sensors**.
29 +Dragino LoRaWAN weather station series products are designed for measuring atmospheric conditions to provide information for weather forecasts and to study the (% style="color:blue" %)**weather and climate**(%%). They consist of a (% style="color:blue" %)**main process device (WSC1-L) and various sensors**.
25 25  )))
26 26  
27 27  (((
28 -The sensors include various type such as: (% style="color:#4472c4" %)**Rain Gauge**, **Temperature/Humidity/Pressure sensor**, **Wind Speed/direction sensor**, **Illumination sensor**, **CO2 sensor**, **Rain/Snow sensor**,** PM2.5/10 sensor**, **PAR(Photosynthetically Available Radiation) sensor, Total Solar Radiation sensor**(%%) and so on.
33 +The sensors include various type such as: (% style="color:blue" %)**Rain Gauge**, **Temperature/Humidity/Pressure sensor**, **Wind Speed/direction sensor**, **Illumination sensor**, **CO2 sensor**, **Rain/Snow sensor**,** PM2.5/10 sensor**, **PAR(Photosynthetically Available Radiation) sensor, Total Solar Radiation sensor**(%%) and so on.
29 29  )))
30 30  
31 31  (((
32 -Main process device WSC1-L is an outdoor LoRaWAN RS485 end node. It is powered by external (% style="color:#4472c4" %)**12v solar power**(%%) and have a (% style="color:#4472c4" %)**built-in li-on backup battery**(%%). WSC1-L reads value from various sensors and upload these sensor data to IoT server via LoRaWAN wireless protocol.
37 +Main process device WSC1-L is an outdoor LoRaWAN RS485 end node. It is powered by external (% style="color:blue" %)**12v solar power**(%%) and have a (% style="color:blue" %)**built-in Li-ion backup battery**(%%). WSC1-L reads value from various sensors and upload these sensor data to IoT server via LoRaWAN wireless protocol.
33 33  )))
34 34  
35 35  (((
36 -WSC1-L is full compatible with(% style="color:#4472c4" %)** LoRaWAN Class C protocol**(%%), it can work with standard LoRaWAN gateway.
41 +WSC1-L is full compatible with(% style="color:blue" %)** LoRaWAN Class C protocol**(%%), it can work with standard LoRaWAN gateway.
37 37  )))
38 38  
39 39  
... ... @@ -59,7 +59,6 @@
59 59  
60 60  WSC1-L is shipped with a RS485 converter board, for the easy connection to different sensors and WSC1-L. Below is a connection photo:
61 61  
62 -
63 63  [[image:1656042136605-251.png]]
64 64  
65 65  
... ... @@ -79,7 +79,6 @@
79 79  * Mounting Kit includes pole and mast assembly. Each weather sensor has it's own mounting assembly, user can check the sensor section in this manual.
80 80  * Cabinet.
81 81  
82 -
83 83  == 2.2 How it works? ==
84 84  
85 85  
... ... @@ -87,7 +87,6 @@
87 87  Each WSC1-L is shipped with a worldwide unique set of OTAA keys. To use WSC1-L in a LoRaWAN network, user needs to input the OTAA keys in LoRaWAN network server. After finish installation as above. Create WSC1-L in your LoRaWAN server and Power on WSC1-L , it can join the LoRaWAN network and start to transmit sensor data. The default period for each uplink is 20 minutes.
88 88  )))
89 89  
90 -
91 91  (((
92 92  Open WSC1-L and put the yellow jumper as below position to power on WSC1-L.
93 93  )))
... ... @@ -100,17 +100,14 @@
100 100  1. WSC1-L will auto scan available weather sensors when power on or reboot.
101 101  1. User can send a [[downlink command>>||anchor="H3.ConfigureWSC1-LviaATCommandorLoRaWANDownlink"]] to WSC1-L to do a re-scan on the available sensors.
102 102  
103 -
104 104  == 2.3 Example to use for LoRaWAN network ==
105 105  
106 106  
107 107  This section shows an example for how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.
108 108  
109 -
110 110  [[image:1656042612899-422.png]]
111 111  
112 112  
113 -
114 114  Assume the DLOS8 is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. We need to add the WSC1-L device in TTN V3:
115 115  
116 116  
... ... @@ -127,6 +127,7 @@
127 127  
128 128  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSE01-LoRaWAN%20Soil%20Moisture%20%26%20EC%20Sensor%20User%20Manual/WebHome/image-20220606163915-7.png?rev=1.1||alt="image-20220606163915-7.png"]]
129 129  
129 +
130 130  **Add APP EUI in the application.**
131 131  
132 132  [[image:1656042662694-311.png]]
... ... @@ -134,27 +134,23 @@
134 134  [[image:1656042673910-429.png]]
135 135  
136 136  
137 -
138 -
139 139  **Choose Manually to add WSC1-L**
140 140  
141 141  [[image:1656042695755-103.png]]
142 142  
143 143  
144 -
145 145  **Add APP KEY and DEV EUI**
146 146  
147 147  [[image:1656042723199-746.png]]
148 148  
149 149  
150 -
151 151  (((
152 152  (% style="color:blue" %)**Step 2**(%%): Power on WSC1-L, it will start to join TTN server. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.
153 153  )))
154 154  
155 -
156 156  [[image:1656042745346-283.png]]
157 157  
153 +
158 158  == 2.4 Uplink Payload ==
159 159  
160 160  
... ... @@ -163,7 +163,6 @@
163 163  * Valid Sensor Value: Use FPORT=2
164 164  * Other control command: Use FPORT other than 2.
165 165  
166 -
167 167  === 2.4.1 Uplink FPORT~=5, Device Status ===
168 168  
169 169  
... ... @@ -174,9 +174,9 @@
174 174  User can also use downlink command**(0x2301)** to ask WSC1-L to resend this uplink
175 175  )))
176 176  
177 -(% border="1" cellspacing="8" style="background-color:#f2f2f2; width:500px" %)
178 -|=(% style="width: 70px;background-color:#D9E2F3" %)**Size(**bytes)|=(% style="width: 60px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)**1**|=(% style="width: 60px;background-color:#D9E2F3" %)**1**|=(% style="width: 50px;background-color:#D9E2F3" %)**2**|=(% style="width: 100px;background-color:#D9E2F3" %)**3**
179 -|(% style="width:99px" %)**Value**|(% style="width:112px" %)[[Sensor Model>>||anchor="HSensorModel:"]]|(% style="width:135px" %)[[Firmware Version>>||anchor="HFirmwareVersion:"]]|(% style="width:126px" %)[[Frequency Band>>||anchor="HFrequencyBand:"]]|(% style="width:85px" %)[[Sub-band>>||anchor="HSub-Band:"]]|(% style="width:46px" %)[[BAT>>||anchor="HBAT:"]]|(% style="width:166px" %)[[Weather Sensor Types>>||anchor="HWeatherSensorTypes:"]]
172 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:500px" %)
173 +|=(% style="width: 70px;background-color:#4F81BD;color:white" %)**Size(**bytes)|=(% style="width: 60px;background-color:#4F81BD;color:white" %)1|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 50px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 100px;background-color:#4F81BD;color:white" %)**3**
174 +|(% style="width:99px" %)Value|(% style="width:112px" %)[[Sensor Model>>||anchor="HSensorModel:"]]|(% style="width:135px" %)[[Firmware Version>>||anchor="HFirmwareVersion:"]]|(% style="width:126px" %)[[Frequency Band>>||anchor="HFrequencyBand:"]]|(% style="width:85px" %)[[Sub-band>>||anchor="HSub-Band:"]]|(% style="width:46px" %)[[BAT>>||anchor="HBAT:"]]|(% style="width:166px" %)[[Weather Sensor Types>>||anchor="HWeatherSensorTypes:"]]
180 180  
181 181  [[image:1656043061044-343.png]]
182 182  
... ... @@ -196,25 +196,25 @@
196 196  
197 197  ==== (% style="color:#037691" %)**Frequency Band:**(%%) ====
198 198  
199 -*0x01: EU868
194 +0x01: EU868
200 200  
201 -*0x02: US915
196 +0x02: US915
202 202  
203 -*0x03: IN865
198 +0x03: IN865
204 204  
205 -*0x04: AU915
200 +0x04: AU915
206 206  
207 -*0x05: KZ865
202 +0x05: KZ865
208 208  
209 -*0x06: RU864
204 +0x06: RU864
210 210  
211 -*0x07: AS923
206 +0x07: AS923
212 212  
213 -*0x08: AS923-1
208 +0x08: AS923-1
214 214  
215 -*0x09: AS923-2
210 +0x09: AS923-2
216 216  
217 -*0x0a: AS923-3
212 +0x0a: AS923-3
218 218  
219 219  
220 220  ==== (% style="color:#037691" %)**Sub-Band:**(%%) ====
... ... @@ -240,8 +240,8 @@
240 240  
241 241  Bit = 1 means this sensor is connected, Bit=0 means this sensor is not connected
242 242  
243 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:520px" %)
244 -|(% rowspan="2" style="width:53px" %)Byte3|(% style="width:71px" %)Bit23|(% style="width:113px" %)Bit22|(% style="width:112px" %)Bit21|(% style="width:113px" %)Bit20|(% style="width:112px" %)Bit19|(% style="width:70px" %)Bit18|(% style="width:72px" %)Bit17|(% style="width:53px" %)Bit16
238 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:517px" %)
239 +|(% rowspan="2" style="width:53px" %)Byte3|(% style="width:71px" %)Bit23|(% style="width:113px" %)Bit22|(% style="width:112px" %)Bit21|(% style="width:110px" %)Bit20|(% style="width:112px" %)Bit19|(% style="width:70px" %)Bit18|(% style="width:72px" %)Bit17|(% style="width:53px" %)Bit16
245 245  |(% style="width:71px" %)N/A|(% style="width:113px" %)Customize-A4|(% style="width:112px" %)Customize-A3|(% style="width:113px" %)Customize-A2|(% style="width:112px" %)Customize-A1|(% style="width:70px" %)N/A|(% style="width:72px" %)N/A|(% style="width:53px" %)N/A
246 246  |(% rowspan="2" style="width:53px" %)Byte2|(% style="width:71px" %)Bit15|(% style="width:113px" %)Bit14|(% style="width:112px" %)Bit13|(% style="width:113px" %)Bit12|(% style="width:112px" %)Bit11|(% style="width:70px" %)Bit10|(% style="width:72px" %)Bit9|(% style="width:53px" %)Bit8
247 247  |(% style="width:71px" %)N/A|(% style="width:113px" %)N/A|(% style="width:112px" %)N/A|(% style="width:113px" %)N/A|(% style="width:112px" %)N/A|(% style="width:70px" %)N/A|(% style="width:72px" %)N/A|(% style="width:53px" %)N/A
... ... @@ -281,7 +281,6 @@
281 281  Uplink uses FPORT=2 and every 20 minutes send one uplink by default.
282 282  )))
283 283  
284 -
285 285  (((
286 286  The upload length is dynamic, depends on what type of weather sensors are connected. The uplink payload is combined with sensor segments. As below:
287 287  )))
... ... @@ -299,16 +299,11 @@
299 299  
300 300  (% style="color:#4472c4" %)**Sensor Type Table:**
301 301  
302 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:520px" %)
303 -|(% style="background-color:#d9e2f3; color:#0070c0; width:103px" %)**Sensor Type**|(% style="background-color:#d9e2f3; color:#0070c0; width:91px" %)**Type Code**|(% style="background-color:#d9e2f3; color:#0070c0; width:116px" %)**Range**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**Length( Bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)**Example**
296 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
297 +|(% style="background-color:#4f81bd; color:white; width:80px" %)**Sensor Type**|(% style="background-color:#4f81bd; color:white; width:65px" %)**Type Code**|(% style="background-color:#4f81bd; color:white; width:97px" %)**Range**|(% style="background-color:#4f81bd; color:white; width:78px" %)**Length( Bytes)**|(% style="background-color:#4f81bd; color:white; width:190px" %)**Example**
304 304  |(% style="width:103px" %)Wind Speed|(% style="width:91px" %)0x01|(% style="width:158px" %)(((
305 -(((
306 -Speed: 0～60m/s
307 -)))
308 -
309 -(((
310 -Level: 0～17
311 -)))
299 +Speed: 0 ~~ 60m/s
300 +Level: 0 ~~ 17
312 312  )))|(% style="width:122px" %)0x03 |(% style="width:904px" %)(((
313 313  (((
314 314  0x0024/10=3.6m/s (0x02FE: No Sensor, 0x02EE: Value Error)
... ... @@ -319,13 +319,8 @@
319 319  )))
320 320  )))
321 321  |(% style="width:103px" %)Wind Direction|(% style="width:91px" %)0x02|(% style="width:158px" %)(((
322 -(((
323 -Angel: 0～360°
324 -)))
325 -
326 -(((
311 +Angel: 0 ~~ 360°
327 327  Direction: 16 positions
328 -)))
329 329  )))|(% style="width:122px" %)0x03|(% style="width:904px" %)(((
330 330  (((
331 331  0x02C9/10=66.6°(0x0EFE: No Sensor,0x0EFF: Value Error)
... ... @@ -382,9 +382,7 @@
382 382  0x00B3=179μmol/m^^2^^•s (0x09FE: No Sensor,0x09FF: Value Error)
383 383  )))
384 384  |(% style="width:103px" %)(((
385 -Total Solar
386 -
387 -Radiation
369 +Total Solar Radiation
388 388  )))|(% style="width:91px" %)0x0D|(% style="width:158px" %)0～2000W/m^^2^^|(% style="width:122px" %)0x02|(% style="width:904px" %)(((
389 389  0x0073/10=11.5W/m^^2^^(0x4EFE: No Sensor,0x4EFF: Value Error)
390 390  )))
... ... @@ -393,9 +393,6 @@
393 393  Below is an example payload:  [[image:image-20220624140615-3.png]]
394 394  )))
395 395  
396 -(((
397 -
398 -)))
399 399  
400 400  (((
401 401  When sending this payload to LoRaWAN server. WSC1-L will send this in one uplink or several uplinks according to LoRaWAN spec requirement. For example, total length of Payload is 54 bytes.
... ... @@ -438,7 +438,6 @@
438 438  Download decoder for suitable platform from:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
439 439  )))
440 440  
441 -
442 442  (((
443 443  and put as below:
444 444  )))
... ... @@ -464,22 +464,18 @@
464 464  [[image:1656051197172-131.png]]
465 465  
466 466  
467 -
468 468  **Add TagoIO:**
469 469  
470 470  [[image:1656051223585-631.png]]
471 471  
472 472  
473 -
474 474  **Authorization:**
475 475  
476 476  [[image:1656051248318-368.png]]
477 477  
478 478  
479 -
480 480  In TagoIO console ([[https:~~/~~/admin.tago.io~~/~~/>>url:https://datacake.co/]]) , add WSC1-L:
481 481  
482 -
483 483  [[image:1656051277767-168.png]]
484 484  
485 485  
... ... @@ -493,7 +493,7 @@
493 493  
494 494  There are two kinds of commands to configure WSC1-L, they are:
495 495  
496 -* (% style="color:#4472c4" %)**General Commands**.
470 +* (% style="color:blue" %)**General Commands**.
497 497  
498 498  These commands are to configure:
499 499  
... ... @@ -505,7 +505,7 @@
505 505  (% style="color:red" %)**Note~*~*: Please check early user manual if you don’t have v1.8.0 firmware. **
506 506  
507 507  
508 -* (% style="color:#4472c4" %)**Commands special design for WSC1-L**
482 +* (% style="color:blue" %)**Commands special design for WSC1-L**
509 509  
510 510  These commands only valid for WSC1-L, as below:
511 511  
... ... @@ -517,8 +517,8 @@
517 517  
518 518  (% style="color:#037691" %)**AT Command: AT+TDC**
519 519  
520 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:501px" %)
521 -|(% style="background-color:#d9e2f3; color:#0070c0; width:155px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:166px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:180px" %)**Response**
494 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:501px" %)
495 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:166px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:180px" %)**Response**
522 522  |(% style="width:155px" %)AT+TDC=?|(% style="width:162px" %)Show current transmit Interval|(% style="width:177px" %)(((
523 523  30000
524 524  OK
... ... @@ -538,7 +538,6 @@
538 538  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
539 539  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
540 540  
541 -
542 542  == 3.2 Set Emergency Mode ==
543 543  
544 544  
... ... @@ -546,8 +546,8 @@
546 546  
547 547  (% style="color:#037691" %)**AT Command:**
548 548  
549 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:465.818px" %)
550 -|(% style="background-color:#d9e2f3; color:#0070c0; width:155px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:224px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:84px" %)**Response**
522 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:466px" %)
523 +|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:225px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:85px" %)**Response**
551 551  |(% style="width:155px" %)AT+ALARMMOD=1|(% style="width:224px" %)Enter emergency mode. Uplink every 1 minute|(% style="width:84px" %)(((
552 552  OK
553 553  
... ... @@ -561,7 +561,6 @@
561 561  * 0xE101     Same as: AT+ALARMMOD=1
562 562  * 0xE100     Same as: AT+ALARMMOD=0
563 563  
564 -
565 565  == 3.3 Add or Delete RS485 Sensor ==
566 566  
567 567  
... ... @@ -636,8 +636,8 @@
636 636  
637 637  In every sampling. WSC1-L will auto append the sensor segment as per this structure and uplink.
638 638  
639 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:351px" %)
640 -|=(% style="width: 95px;background-color:#D9E2F3;color:#0070C0" %)Type Code|=(% style="width: 122px;background-color:#D9E2F3;color:#0070C0" %)Length (Bytes)|=(% style="width: 134px;background-color:#D9E2F3;color:#0070C0" %)Measured Value
611 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:351px" %)
612 +|=(% style="width: 95px;background-color:#4F81BD;color:white" %)Type Code|=(% style="width: 122px;background-color:#4F81BD;color:white" %)Length (Bytes)|=(% style="width: 134px;background-color:#4F81BD;color:white" %)Measured Value
641 641  |(% style="width:94px" %)A1|(% style="width:121px" %)2|(% style="width:132px" %)0x000A
642 642  
643 643  **Related commands:**
... ... @@ -657,22 +657,15 @@
657 657  
658 658  * 0xE5FF  
659 659  
660 -
661 661  == 3.4 RS485 Test Command ==
662 662  
663 663  
664 664  (% style="color:#037691" %)**AT Command:**
665 665  
666 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:474px" %)
667 -|=(% style="width: 160px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 228px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 86px;background-color:#D9E2F3;color:#0070C0" %)**Response**
637 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:494px" %)
638 +|=(% style="width: 160px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 248px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 86px;background-color:#4F81BD;color:white" %)**Response**
668 668  |(% style="width:159px" %)AT+RSWRITE=xxxxxx|(% style="width:227px" %)(((
669 -(((
670 -Send command to 485 sensor
671 -)))
672 -
673 -(((
674 -Range : no more than 10 bytes
675 -)))
640 +Send command to 485 sensor. Range : no more than 10 bytes
676 676  )))|(% style="width:85px" %)OK
677 677  
678 678  Eg: Send command **01 03 00 00 00 01 84 0A** to 485 sensor
... ... @@ -679,12 +679,13 @@
679 679  
680 680  AT+RSWRITE=0103000001840A
681 681  
647 +If there is output from sensor, The console will show the output data
682 682  
649 +
683 683  (% style="color:#037691" %)**Downlink Command:**
684 684  
685 685  * 0xE20103000001840A     Same as: AT+RSWRITE=0103000001840A
686 686  
687 -
688 688  == 3.5 RS485 response timeout ==
689 689  
690 690  
... ... @@ -692,20 +692,10 @@
692 692  
693 693  (% style="color:#037691" %)**AT Command:**
694 694  
695 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:433px" %)
696 -|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 86px;background-color:#D9E2F3;color:#0070C0" %)**Response**
661 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:433px" %)
662 +|=(% style="width: 157px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 190px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 86px;background-color:#4F81BD;color:white" %)**Response**
697 697  |(% style="width:157px" %)AT+DTR=1000|(% style="width:188px" %)(((
698 -(((
699 -(((
700 -Set response timeout to:
701 -)))
702 -)))
703 -
704 -(((
705 -(((
706 -Range : 0~~10000
707 -)))
708 -)))
664 +Set response timeout to: Range : 0~~10000
709 709  )))|(% style="width:85px" %)OK
710 710  
711 711  (% style="color:#037691" %)**Downlink Command:**
... ... @@ -717,7 +717,6 @@
717 717  * Example 1: Downlink Payload: E0000005  ~/~/  Set Transmit Interval (DTR) = 5 seconds
718 718  * Example 2: Downlink Payload: E000000A  ~/~/  Set Transmit Interval (DTR) = 10 seconds
719 719  
720 -
721 721  == 3.6 Set Sensor Type ==
722 722  
723 723  
... ... @@ -728,7 +728,7 @@
728 728  (((
729 729  See [[definition>>||anchor="HWeatherSensorTypes:"]] for the sensor type.
730 730  
731 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:520px" %)
686 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:517px" %)
732 732  |(% rowspan="2" %)Byte3|Bit23|Bit22|Bit21|Bit20|Bit19|Bit18|Bit17|Bit16
733 733  | |A4|A3|A2|A1| | |
734 734  |(% rowspan="2" %)Byte2|Bit15|Bit14|Bit13|Bit12|Bit11|Bit10|Bit9|Bit8
... ... @@ -752,13 +752,13 @@
752 752  
753 753  (% style="color:#037691" %)**AT Command:**
754 754  
755 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:377px" %)
756 -|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 132px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 88px;background-color:#D9E2F3;color:#0070C0" %)**Response**
710 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:377px" %)
711 +|=(% style="width: 157px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 132px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 88px;background-color:#4F81BD;color:white" %)**Response**
757 757  |(% style="width:157px" %)AT+STYPE=80221|(% style="width:130px" %)Set sensor types|(% style="width:87px" %)OK
758 758  
759 759  Eg: The setting command **AT+STYPE=80221** means:
760 760  
761 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:495px" %)
716 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:495px" %)
762 762  |(% rowspan="2" style="width:57px" %)Byte3|(% style="width:57px" %)Bit23|(% style="width:59px" %)Bit22|(% style="width:56px" %)Bit21|(% style="width:51px" %)Bit20|(% style="width:54px" %)Bit19|(% style="width:54px" %)Bit18|(% style="width:52px" %)Bit17|(% style="width:52px" %)Bit16
763 763  |(% style="width:57px" %)0|(% style="width:59px" %)0|(% style="width:56px" %)0|(% style="width:51px" %)0|(% style="width:54px" %)1|(% style="width:54px" %)0|(% style="width:52px" %)0|(% style="width:52px" %)0
764 764  |(% rowspan="2" style="width:57px" %)Byte2|(% style="width:57px" %)Bit15|(% style="width:59px" %)Bit14|(% style="width:56px" %)Bit13|(% style="width:51px" %)Bit12|(% style="width:54px" %)Bit11|(% style="width:54px" %)Bit10|(% style="width:52px" %)Bit9|(% style="width:52px" %)Bit8
... ... @@ -778,32 +778,32 @@
778 778  ~1. The sensor type will not be saved to flash, and the value will be updated every time the sensor is restarted or rescanned.
779 779  
780 780  
781 -== 3.7  Set the registers read by the rain gauge（Since firmware V1.3） ==
736 +== 3.7  Set the registers read by the rain gauge(Since firmware V1.3) ==
782 782  
738 +
783 783  (% style="color:#037691" %)**AT Command:**
784 784  
785 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:433px" %)
786 -|=(% style="width: 161px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Command Example**|=(% style="width: 184px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 86px;background-color:#D9E2F3;color:#0070C0" %)**Response**
787 -|(% style="width:161px" %)(((
788 -AT+RAINFALLSWITCH=1
789 -
790 -（Range: 1~~10）
791 -)))|(% style="width:184px" %)(((
792 -(((
793 -(((
741 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
742 +|=(% style="width: 230px; background-color: rgb(79, 129, 189); color: white;" %)**Command Example**|=(% style="width: 232px; background-color: rgb(79, 129, 189); color: white;" %)**Function**|=(% style="width: 48px; background-color: rgb(79, 129, 189); color: white;" %)**Response**
743 +|(% style="width:240px" %)(((
744 +AT+RAINFALLSWITCH=10(Value:3,4,5,6,8,10)
745 +)))|(% style="width:232px" %)(((
794 794  Set the registers read by the rain gauge
795 -)))
796 -)))
797 -)))|(% style="width:85px" %)OK
747 +)))|(% style="width:38px" %)OK
798 798  
799 -
800 800  (% style="color:#037691" %)**Downlink Command:**
801 801  
802 -* 0x1701  Same as: AT+RAINFALLSWITCH=1
751 +* 0x1703  Same as: AT+RAINFALLSWITCH=3
803 803  
804 -(% class="wikigeneratedid" %)
805 -= =
753 +Value Definition:
806 806  
755 +* **3**: The total rainfall after the sensor is powered on  (for example  Total rainfall: 166.5mm)
756 +* **4**: Hourly rainfall: 0.2mm
757 +* **5**: Rainfall in last hour: 0.2mm
758 +* **6**: 24-hour maximum rainfall 10.0mm
759 +* **8**: 24-hour minimum rainfall:0.0mm
760 +* **10**: Rainfall in 24 hours: 8.0mm (Rainfall in the last 24 hours)
761 +
807 807  = 4. Power consumption and battery =
808 808  
809 809  == 4.1 Total Power Consumption ==
... ... @@ -847,7 +847,6 @@
847 847  * IP Rating: IP65
848 848  * Support default sensors or 3rd party RS485 sensors
849 849  
850 -
851 851  == 5.2 Power Consumption ==
852 852  
853 853  
... ... @@ -921,7 +921,6 @@
921 921  * ABS enclosure.
922 922  * Horizontal adjustable.
923 923  
924 -
925 925  === 6.1.2 Specification ===
926 926  
927 927  
... ... @@ -928,14 +928,13 @@
928 928  * Resolution: 0.2mm
929 929  * Accuracy: ±3%
930 930  * Range: 0 ~~ 100mm
931 -* Rainfall strength: 0mm～4mm/min (max 8mm/min)
932 -* Input Power: DC 5~~24v
884 +* Rainfall strength: 0mm ~~ 4mm/min (max 8mm/min)
885 +* Input Power: DC 5 ~~ 24v
933 933  * Interface: RS485
934 -* Working Temperature: 0℃～70℃ ( incorrect below 0 degree, because water become ICE)
887 +* Working Temperature: 0℃ ~~ 70℃ (incorrect below 0 degree, because water become ICE)
935 935  * Working Humidity: <100% (no dewing)
936 936  * Power Consumption: 4mA @ 12v.
937 937  
938 -
939 939  === 6.1.3 Dimension ===
940 940  
941 941  
... ... @@ -1012,22 +1012,20 @@
1012 1012  * RS485 wind speed / direction sensor
1013 1013  * PC enclosure, resist corrosion
1014 1014  
1015 -
1016 1016  === 6.2.2 Specification ===
1017 1017  
1018 1018  
1019 1019  * Wind speed range: 0 ~~ 60m/s
1020 1020  * Wind direction range: 0 ~~ 360°
1021 -* Start wind speed: ≤0.3m/s
1022 -* Accuracy: ±（0.3＋0.03V）m/s , ±1°
1023 -* Input Power: DC 5~~24v
972 +* Start wind speed: ≤0.3 m/s
973 +* Accuracy: ±(0.3＋0.03V) m/s , ±1°
974 +* Input Power: DC 5 ~~ 24v
1024 1024  * Interface: RS485
1025 -* Working Temperature: -30℃～70℃
976 +* Working Temperature: -30℃ ~~ 70℃
1026 1026  * Working Humidity: <100% (no dewing)
1027 1027  * Power Consumption: 13mA ~~ 12v.
1028 1028  * Cable Length: 2 meters
1029 1029  
1030 -
1031 1031  === 6.2.3 Dimension ===
1032 1032  
1033 1033  
... ... @@ -1085,26 +1085,24 @@
1085 1085  * NDIR to measure CO2 with Internal Temperature Compensation
1086 1086  * Laser Beam Scattering to PM2.5 and PM10
1087 1087  
1088 -
1089 1089  === 6.3.2 Specification ===
1090 1090  
1091 1091  
1092 -* CO2 Range: 0～5000ppm, accuracy: ±3%F•S（25℃）
1041 +* CO2 Range: 0 ~~ 5000ppm, accuracy: ±3%F•S(25℃)
1093 1093  * CO2 resolution: 1ppm
1094 -* PM2.5/PM10 Range: 0～1000μg/m3 , accuracy ±3%F•S（25℃）
1043 +* PM2.5/PM10 Range: 0 ~~ 1000μg/m3 , accuracy ±3%F•S(25℃)
1095 1095  * PM2.5/PM10 resolution: 1μg/m3
1096 1096  * Input Power: DC 7 ~~ 24v
1097 1097  * Preheat time: 3min
1098 1098  * Interface: RS485
1099 1099  * Working Temperature:
1100 -** CO2: 0℃～50℃;
1049 +** CO2: 0℃ ~~ 50℃;
1101 1101  ** PM2.5/PM10: -30 ~~ 50℃
1102 1102  * Working Humidity:
1103 -** PM2.5/PM10: 15～80%RH (no dewing)
1104 -** CO2: 0～95%RH
1052 +** PM2.5/PM10: 15 ~~ 80%RH (no dewing)
1053 +** CO2: 0 ~~ 95%RH
1105 1105  * Power Consumption: 50mA@ 12v.
1106 1106  
1107 -
1108 1108  === 6.3.3 Dimension ===
1109 1109  
1110 1110  
... ... @@ -1152,7 +1152,6 @@
1152 1152  * Surface heating to dry
1153 1153  * grid electrode uses Electroless Nickel/Immersion Gold design for resist corrosion
1154 1154  
1155 -
1156 1156  === 6.4.2 Specification ===
1157 1157  
1158 1158  
... ... @@ -1159,13 +1159,12 @@
1159 1159  * Detect if there is rain or snow
1160 1160  * Input Power: DC 12 ~~ 24v
1161 1161  * Interface: RS485
1162 -* Working Temperature: -30℃～70℃
1163 -* Working Humidity: 10～90%RH
1109 +* Working Temperature: -30℃ ~~ 70℃
1110 +* Working Humidity: 10 ~~ 90%RH
1164 1164  * Power Consumption:
1165 1165  ** No heating: 12mA @ 12v,
1166 1166  ** heating: 94ma @ 12v.
1167 1167  
1168 -
1169 1169  === 6.4.3 Dimension ===
1170 1170  
1171 1171  
... ... @@ -1218,7 +1218,6 @@
1218 1218  
1219 1219  * RS485 Temperature, Humidity, Illuminance, Pressure sensor
1220 1220  
1221 -
1222 1222  === 6.5.2 Specification ===
1223 1223  
1224 1224  
... ... @@ -1233,18 +1233,17 @@
1233 1233  ** resolution 0.1 %RH
1234 1234  ** Accuracy: 3% RH
1235 1235  * Pressure Sensor Spec:
1236 -** Range: 10～1100hPa
1181 +** Range: 10 ~~ 1100hPa
1237 1237  ** Resolution: 0.1hPa
1238 1238  ** Accuracy: ±0.1hPa
1239 1239  * Illuminate sensor:
1240 -** Range: 0～2/20/200kLux
1185 +** Range: 0~~2/20/200kLux
1241 1241  ** Resolution: 10 Lux
1242 -** Accuracy: ±3％FS
1243 -* Working Temperature: -30℃～70℃
1244 -* Working Humidity: 10～90%RH
1187 +** Accuracy: ±3%FS
1188 +* Working Temperature: -30℃ ~~ 70℃
1189 +* Working Humidity: 10 ~~ 90%RH
1245 1245  * Power Consumption: 4mA @ 12v
1246 1246  
1247 -
1248 1248  === 6.5.3 Dimension ===
1249 1249  
1250 1250  
... ... @@ -1264,7 +1264,6 @@
1264 1264  
1265 1265  [[image:1656057199955-514.png]]
1266 1266  
1267 -
1268 1268  [[image:1656057212438-475.png]]
1269 1269  
1270 1270  
... ... @@ -1288,27 +1288,25 @@
1288 1288  
1289 1289  
1290 1290  * RS485 Total Solar Radiation sensor
1291 -* Measure Total Radiation between 0.3～3μm（300～3000nm）
1234 +* Measure Total Radiation between 0.3 ~~ 3μm(300 ~~ 3000nm)
1292 1292  * Measure Reflected Radiation if sense area towards ground.
1293 1293  
1294 -
1295 1295  === 6.6.2 Specification ===
1296 1296  
1297 1297  
1298 1298  * Input Power: DC 5 ~~ 24v
1299 1299  * Interface: RS485
1300 -* Detect spectrum: 0.3～3μm（300～3000nm）
1301 -* Measure strength range: 0～2000W/m2
1242 +* Detect spectrum: 0.3 ~~ 3μm(300～3000nm)
1243 +* Measure strength range: 0 ~~ 2000W/m2
1302 1302  * Resolution: 0.1W/m2
1303 1303  * Accuracy: ±3%
1304 -* Yearly Stability: ≤±2％
1305 -* Cosine response: ≤7％ (@ Sun angle 10°)
1306 -* Temperature Effect: ±2％（－10℃～40℃）
1307 -* Working Temperature: -40℃～70℃
1308 -* Working Humidity: 10～90%RH
1246 +* Yearly Stability: ≤±2%
1247 +* Cosine response: ≤7% (@ Sun angle 10°)
1248 +* Temperature Effect: ±2% (-10℃ ~~ 40℃)
1249 +* Working Temperature: -40℃ ~~ 70℃
1250 +* Working Humidity: 10 ~~ 90%RH
1309 1309  * Power Consumption: 4mA @ 12v
1310 1310  
1311 -
1312 1312  === 6.6.3 Dimension ===
1313 1313  
1314 1314  
... ... @@ -1326,10 +1326,8 @@
1326 1326  
1327 1327  Do not power on while connect the cables. Double check the wiring before power on.
1328 1328  
1329 -
1330 1330  [[image:1656057369259-804.png]]
1331 1331  
1332 -
1333 1333  [[image:1656057377943-564.png]]
1334 1334  
1335 1335  
... ... @@ -1366,16 +1366,15 @@
1366 1366  
1367 1367  * Input Power: DC 5 ~~ 24v
1368 1368  * Interface: RS485
1369 -* Response Spectrum: 400～700nm
1370 -* Measure range: 0～2500μmol/m2•s
1308 +* Response Spectrum: 400~~700nm
1309 +* Measure range: 0 ~~ 2500μmol/m2•s
1371 1371  * Resolution: 1μmol/m2•s
1372 1372  * Accuracy: ±2%
1373 -* Yearly Stability: ≤±2％
1374 -* Working Temperature: -30℃～75℃
1375 -* Working Humidity: 10～90%RH
1312 +* Yearly Stability: ≤ ±2%
1313 +* Working Temperature: -30℃ ~~ 75℃
1314 +* Working Humidity: 10 ~~ 90%RH
1376 1376  * Power Consumption: 3mA @ 12v
1377 1377  
1378 -
1379 1379  === 6.7.3 Dimension ===
1380 1380  
1381 1381  
... ... @@ -1393,10 +1393,8 @@
1393 1393  
1394 1394  Do not power on while connect the cables. Double check the wiring before power on.
1395 1395  
1396 -
1397 1397  [[image:1656057557191-895.png]]
1398 1398  
1399 -
1400 1400  [[image:1656057565783-251.png]]
1401 1401  
1402 1402  
... ... @@ -1418,12 +1418,9 @@
1418 1418  
1419 1419  
1420 1420  (((
1421 -Firmware Location & Change log:
1422 -
1423 -[[https:~~/~~/www.dropbox.com/sh/fuorz31grv8i3r1/AABmjFDU4FADNP6sq7fsmBwVa?dl=0>>https://www.dropbox.com/sh/fuorz31grv8i3r1/AABmjFDU4FADNP6sq7fsmBwVa?dl=0]]
1357 +Firmware Location & Change log: [[https:~~/~~/www.dropbox.com/sh/j6uco1uirwqbng1/AAAwGoxamL5xNJR5Z6CTqGXha?dl=0>>https://www.dropbox.com/sh/j6uco1uirwqbng1/AAAwGoxamL5xNJR5Z6CTqGXha?dl=0]]
1424 1424  )))
1425 1425  
1426 -
1427 1427  (((
1428 1428  Firmware Upgrade instruction:  [[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome||anchor="H2.HardwareUpgradeMethodSupportList"]]
1429 1429  )))
... ... @@ -1447,6 +1447,28 @@
1447 1447  See this link for the [[modbus command set>>https://www.dropbox.com/s/rw90apbar029a4w/Weather_Sensors_Modbus_Command_List.xlsx?dl=0]].
1448 1448  
1449 1449  
1383 +== 7.6  How to change the data read by the rain gauge? ==
1384 +
1385 +
1386 +Users can run the AT+RAINFALLSWITCH command to query the data of the rain gauge.
1387 +
1388 +AT+RAINFALLSWITCH=10(Range: 3,4,5,6,8,10)
1389 +
1390 +**Rainfall query value:**
1391 +
1392 +3：The total rainfall after the sensor is powered on  (for example  Total rainfall: 166.5mm)
1393 +
1394 +4：Current Hourly rainfall: etc 0.2mm
1395 +
1396 +5：Rainfall in last hour: etc 0.2mm
1397 +
1398 +6：24-hour maximum rainfall: etc  10.0mm
1399 +
1400 +8：24-hour minimum rainfall: etc  0.0mm
1401 +
1402 +10：Rainfall in 24 hours: 8.0mm  (Rainfall in the last 24 hours)
1403 +
1404 +
1450 1450  = 8. Trouble Shooting =
1451 1451  
1452 1452  == 8.1 AT Command input doesn't work ==
... ... @@ -1457,6 +1457,20 @@
1457 1457  )))
1458 1458  
1459 1459  
1415 +== 8.2  Possible reasons why the device is unresponsive: ==
1416 +
1417 +
1418 +~1. Check whether the battery voltage is lower than 2.8V
1419 +2. Check whether the jumper of the device is correctly connected
1420 +
1421 +[[image:image-20240330173709-1.png]]
1422 +
1423 +
1424 +3. Check whether the switch here of the device is at the ISP(The switch can operate normally only when it is in RUN)
1425 +
1426 +[[image:image-20240330173724-2.png]]
1427 +
1428 +
1460 1460  = 9. Order Info =
1461 1461  
1462 1462  == 9.1 Main Process Unit ==
... ... @@ -1475,12 +1475,11 @@
1475 1475  * (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
1476 1476  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1477 1477  
1478 -
1479 1479  == 9.2 Sensors ==
1480 1480  
1481 1481  
1482 -(% border="1" cellspacing="10" style="background-color:#f2f2f2; width:500px" %)
1483 -|=(% style="width: 300px;background-color:#D9E2F3;color:#0070C0" %)**Sensor Model**|=(% style="width: 200px;background-color:#D9E2F3;color:#0070C0" %)**Part Number**
1450 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:500px" %)
1451 +|=(% style="width: 300px;background-color:#4F81BD;color:white" %)**Sensor Model**|=(% style="width: 200px;background-color:#4F81BD;color:white" %)**Part Number**
1484 1484  |(% style="width:462px" %)Rain Gauge|(% style="width:120px" %)WSS-01
1485 1485  |(% style="width:462px" %)Rain Gauge installation Bracket for Pole|(% style="width:120px" %)WS-K2
1486 1486  |(% style="width:462px" %)Wind Speed Direction 2 in 1 Sensor|(% style="width:120px" %)WSS-02
... ... @@ -1490,7 +1490,6 @@
1490 1490  |(% style="width:462px" %)Total Solar Radiation Sensor|(% style="width:120px" %)WSS-06
1491 1491  |(% style="width:462px" %)PAR (Photosynthetically Available Radiation)|(% style="width:120px" %)WSS-07
1492 1492  
1493 -
1494 1494  = 10. Support =
1495 1495  
1496 1496  
... ... @@ -1498,7 +1498,6 @@
1498 1498  
1499 1499  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
1500 1500  
1501 -
1502 1502  = 11. Appendix I: Field Installation Photo =
1503 1503  
1504 1504  
image-20231030101817-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +60.0 KB
Content
image-20231030102040-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +60.3 KB
Content
image-20231030102056-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +60.3 KB
Content
image-20240330173709-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +445.4 KB
Content
image-20240330173724-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +445.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0